No output on the monitor after the system resumes

Similar Questions

• I looked at my report system and have several that say "the system resumed stand-by", what happens almost every day. My computer worked fine, what is all this history?

  I use Uniblue to clean my mistakes, if he had a year now and didn't have not encountered any problems. But what is all the stuff 'recovery from sleep mode? Thanks for any help.

  I thought that you said in your first post that you have no problem.

  The release of the standby mode is the computer to wake. Normal.

  With EventIDs you need the source it's EventID + Source. There may be hundreds of EventID 302. And as there is no complete list, we also have the text. This is a partial list - http://www.eventid.net/display.asp?eventid=302

  Registry cleaners tend not to do much (if they are safe to use) or try things that the programmer does not understand and are not safe. Problems may not be noticed for long periods.

  If you plug device USB 2 (or 1) USB 3 (or 2), you will get the message to plug it into a faster port. My computer has USB 1 and 2 USB ports.

• TouchSmart 610 1150y: No Audio output device is installed after the system recovery

  I recently experienced an issue that forced me to do a system recovery. I upgraded Windows 10 months passed without problem from 7. After saving, I did the recovery. The Beats Audio System will not work now and the system indicates device output Installed in no..

  I tried to download drivers without impact. I also uninstalled the audio controller (IDT High Definition Audio CODEC) via Device Manager and rebooted him the system. Doing so resulted in a warning on the unit triangle. When I try to download software updates for it, it starts to download the driver, and then sends an idicating error message that a driver has been found but the device does not work. The audio worked perfectly until I ran the recovery, so it seems not to be a hardware failure.

  

  Can you suggest a way to solve this problem or to diagnose the problem?  Thanks for any help you can provide!

  Mark

  Finally! I found a solution! A Google search for a Codec IDT pilot lost in Windows 10 randomly suggested another thread here on the HP Forum. After several suggestions, is affected:

  1. Select IDT High Definition Audio CODEC on Device Manager.

  2. Select the driver tab.

  3. click on Update Driver... button.

  4. Select-> Browse my computer for driver software.

  5. Select-> let me collect a list of drivers for devices on my computer.

  6. Select Audio device high definition (not IDT high def...)  "This is important). and click Next.

  Displays warning message, but the answer Yes.

  7. Windows has updated your driver software.

  Key is step 6.

  Perfect! Worked like a champ!  Problem solved... just took me two weeks to find.

• strong volume after starting the system activity

  There is an activity volume on three different computers (iMac 27 "3.2 GHz MacBook Pro 15" 2.8 GHz mid 2009 at the end of 2012 and MacBook 13 "2.26 GHz late 2009) once the system has started. It's worse on the iMac that is the most powerful of the three computers. Less than 10 minutes after startup, the computer reads more than 5 GB of data and written more than 2.5 GB of data (reported by activity monitor). The replies from the computer very slowly. The Finder displays the content of windows after 30 seconds or more. Programs need more than two minutes to start. After about 7 to 10 minutes the heavy disk activity subsides, and the computer is fast.

  In the activity monitor, I can see that Spotlight and its mds workers uses a lot of CPU power and drive. They index for about 5 minutes (the progress bar appears in the Spotlight search window). I've already wiped the Spotlight index and rebuilt twice. It does not help. There is no startup item that could break the computers. Why does the system read in so much data? What is it? Is it possible to postpone the reindexing of Spotlight on the system startup? Please do advice generate me SSD to three computers.

  Download and run EtreCheck, created by one of his own assistants here in CSA. It is a diagnostic tool that is very useful for us to find problems. It will also give us additional specifications on your Mac. After his execution after the logfile here. It will never contain any personal information. Simply choose one of your Macs to run on.

• A patch prevents the system from start - after KB981852

  Now I got my Windows 7 x 64 no longer starts after the automatic update of last night. Seems that some hardware configurations are not affected. I can't start for something else than to the console. I tried to remove everything "removable". All I need is to begin the system only once, to run some software to make backups. Unfortunately, I don't have restore points, or images of my system. In the newspapers of the restoration, I could see 'BadPatch '.

  Hi MichaelKim,

  Do you get any error messages when you try to start?

  Step 1: Try the Startup Repair tool and check if the problem persists

  Startup Repair:- Startup Repair is a Windows Recovery tool that can fix certain problems, such as system files missing or damaged that could preventWindows to start properly.

  Access system recovery options. Follow the steps mentioned in the link below

  What are the 7 system recovery options windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

   

  Step 2: Try to remove the update pending via the Windows Recovery Environment command prompt (WIN RE)

   

  (a) access advanced menu boot options by pressing the key F8 during restart the computer > on the screen Advanced Startup Options > optionSelect repair your computer (as mentioned in the previous step)

  (b) now select recovery command line tool

  (c) at the command prompt, type Dism/Online/Get - Packages , and then press ENTER.

  This will produce a list of updates installed and packets.  They will look like this:

  The package identity: WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226

  Status: installed

  Output type: Feature Pack

  Install time: 25/09/2009 12:02 AM

  
  Find the most recent and then make a note of the name of the package.

  (d) then run the command: dism Online/Remove-Package/PackageName:WUClient-SelfUpdate-Core-TopLevel ~ 31bf3856ad364e35 ~ x 86 ~ ~ 7.4.7600.226 (name of update of the previous step)

  Restart the computer and test to see if the problem persists

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• Yet stolen the system restore disk after that I have disabled

  I noticed that something was stolen from my hard drives recently and went in the resource monitor to check it out.  I noticed that the system process continually wrote to the 'System Volume Information' folders on all three of my drives at a heavy pace.  Some research indicates that he was at work system restore feature.  So, I disabled for each drive and deleted all restore points each through Windows system properties.  Unfortunately, which made no difference, even after a reboot.  Resource monitor shows still writing for the 'System Volume Information' folders on all hard drives 3 heavy disk.  What can I do to make this stop?

  In addition, Windows Explorer bounces between statement my drive correctly and I have very little or no space left.

  RReed

  My bad.  I saw Bitlocker and typed bit defender.

  Fvevol.sys with BitLocker Drive Encryption description driver of Microsoft Corporation belonging to Microsoft® Windows® operating income...

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• After a crash of the system Windows, Thunderbird displays only about half of my gmail folders (labels).

  In my email account, I use a number of folders to organize my e-mail messages. After a crash of the system Windows, Thunderbird restarted, but now I see about half of my files and cannot access a large number of messages filed away. They always appear when I use my browser to access the gmail account, so the labels are still there. How can I repair damaged files thunderbird/arrangements? I use the current version (31.4.0)

  AHA! It already showed that I have subscribed to all of the folders, visible and missing, but after a combination of clicks (not sure what sequence of refreshment and subscribe and OK), they are all back.

  Thank you! Very useful.

• History of Firefox, login sessions is deleted after the system shuts down

  I have synced my browser with my gmail account. After browsing and closing/restarting the system, the Firefox start with only the bookmarks, history of form from the sync account and forget what I did now.

  -> Done creating a new profile
  -> Decommissioning/reinstall the browser
  -> Delete delete any antivirus is likely history
  -> Sync n number of times

  Do not always completely new story after his stop.

  What can be the solution?

  You can check for problems with the database places.sqlite file in the Firefox profile folder.

  • http://KB.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
  • https://support.Mozilla.org/KB/bookmarks+not+saved#w_fix-the-bookmarks-file
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

  You can check the settings for 'clear history of Firefox closing. "

  • Tools > Options > privacy > Firefox will be: "Use the custom settings for history": [X] 'Clear history of Firefox closing' > settings
  • https://support.Mozilla.org/KB/remove-recent-browsing-search-and-download-history

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-up windows, installation of software, passwords, and other specific data from Web site.

• How can I get Thunderbird for me to choose the SMTP that IMAP when reinstalling after a system crash?

  I had a crash of the system Jan. After the crash recovery (Windows had written on some parts of the disc but recovered most of the things, however, they were put to the States as if they had just been installed), Thunderbird did something I've been unhappy with & I reinstalled it. When I did it I did not select IPOP or IMAP but come with IMAP, I had never used before and knew nothing of. However, now after reading about IMAP & have consumed with Comcast, I don't like it intensely - it is slow and cumbersome and cannot me save emails with all the parts for them permanently. I did have the time to continue so far. How can I return to the use of IPOP?

  POP and IMAP are the two inbound messaging protocols.
  SMTP is the outgoing mail protocol.

  Maybe when Apple invents its own protocol of e-mail it will be iPOP as all other iSomethings

  Here are the instructions for switching to Thunderbird from IMAP to pop...

  https://support.Mozilla.org/en-us/KB/FAQ-changing-IMAP-POP

• Why, after update plug-ins by the system of firefox [specifically adobe acrobat 10.1.4.38] it does not recognize it and says I need to update?

  This happened on & off for a while. I tried updating via firefox, uninstall and update in acrobat and firefox. He says updating but the version does not change and cannot find any evidence, he did. Even uninstall always reinstalled 10.1.4.38 - the same version that I've had since started using firefox.
  Also, today I updated 'Shockwave Flash' at the same place & update says it still need to be updated (don't remember which version he says), but I had disabled Shockwave for Director "." When I gave the update kept saying to update Flash.
  
  Any chance there is a link between Acrobat & something similar to the 'Director' which will help to update recognize? A program distant cousin?

  Hi Uptown22, I guess you tried to restart Windows to see if the Adobe Reader update ends after a restart, or if the update from Adobe works best when the system has just been restarted and that you did not start Firefox or any other program that could use Adobe files. If this isn't the case, you might want to try it.

  If you check on Adobe Reader or Adobe Acrobat in your Adobe product, which version actually installed?

  If you have a version higher than 10.1.4:

  Search many PDF plugins on your system might try either of the following:

  • full search of drive C for nppdf32.dll (be sure to search in hidden folders) - you need to check the version properties to determine if they meet your true version
  • Secunia PSI (free for use on non-professional computers): http://secunia.com/vulnerability_scanning/personal/ - will find obsolete plugins and in its advanced mode show you the location on disk

• Cannot restore the system after a virus attack

  After infection by several virus Trojan horse my computers hit by the old blue screen of death.

  The system can operate in safe mode with networking, but will not boot normally without returning instantly to the blue screen.
  The system restore program will not work in safe mode, because he says has no date set to roll back, when I try to set a date to roll back it comes to properties system saying that it should be returning it on the system protection.

  All the solutions to put an end to my plague of blue screen and a restorableness?

  Hello!

  Sorry, but I think that in this case, the only solution is to reinstall Windows. :(
  If SafeMode doesn t you nothing and sometimes viruses destroy the system roll back function.

  I had a similar problem a few months back, and the only solution is to reinstall Windows. I had no change to remove the virus.

  Good luck!

  Good bye

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?