No output

Similar Questions

• Update of the "couldn't find any output device" after the Sierra

  I've updated my iMac (model 14.2) of OS X El Capitan with macOS Sierra yesterday. The update went smoothly except that once the complete update, the Office and I logged the volume in the menu bar icon is grayed out. I immediately opened settings, assuming that the update had deselected somehow my default audio output device (a pair of external speakers, in this case). But when I went on the audio menu, I was surprised to see "not found any output device.

  I have looked around a bit and have not yet found anyone else with this problem. I became so desperate to get my audio that I even tried installing 3rd party 'Voodoo' audio driver, but it gave me the option for "Digital out (HDMI)" which is of no use to me, I have the mac connected to a TV via a VGA adapter and it does not have a HDMI adapter. One thing it stated however is that somehow during my got deleted and never replaced Applehda driver upgrade, or install a driver on 3rd wouldn't have added of output devices to list (albeit dimmed those outside and totally dysfunctional). So at this point, that I am at a loss, I know not how to replace the driver, where or how I would install it so any help is greatly appreciated. Danke!

  Hi Alison E.C..

  Thanks for the upgrade to Mac OS Sierra! I see that you have lost your audio output device once you upgrade. No worries. Great way to try to get your audio works using another audio driver. Given that this has not solved the problem, please try to reset the NVRAM.
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.
  Information stored in the NVRAM may include:
  The speaker volume
  Screen resolution
  Selection of boot drive
  These latest panic the kernel, if applicable
  If you encounter problems with these features, you may need to reset the NVRAM on your computer. For example, if your Mac starts up from a bootdisk other than that specified in startup disk preferences, or a question mark icon appears briefly at the start of your Mac.

  How to reset the NVRAM on your Mac.

  This should have your internal audio device showing as it should be under your settings in the system preferences. Please use the Apple Support communities to post your question.

  Have a great day.

• Connecting apple tv to the output of the HARD drive?

  Can someone help me with the apple tv connection to my TV? My TV has only hdmi output which I already use for a satellite dish. The only other available exit is the HARD drive, but I only have a hdmi cable to hdmi. Is there such a thing as hard drive hdmi cable to? any help would be appreciated.

  I guess it's a usb port on your tv labled as a hard drive. If that's true, you can get a cable hdmi to usb - if there is such an animal.

  Good day.

• tvOS 10 update breaks DD5.1 on Apple TV output 4 HDMI

  Then, I upgraded tvOS 10 last night. Now, all the movies content on Netflix or iTunes won't play with audio when I output 5.1.

  I have my TV connected to a HDMI/optical splitter so that it can feed my Sonos Playbar. Prior to the update of the audio has been correctly be pulled the HDMI cable and divided optics 5.1 true, as stated in my application of parameters of Sonos. Since the update, I have to stereo to get all the sounds, which is so obviously not true 5.1.

  Someone else had this problem? Any ideas on a solution?

  Thank you.

  Try the Bike ATV power and sound systems. It is working for me with HDMI to TV and optical out to A / V receiver. It has no reason for the software of the ATV to make it different than before.

• You can assign output by ascending path to an existing project in the logic?

  Hi all

  Never really need to do until today

  Got a logic project (others 50 titles) I need to assign the output increasing outputs audio.

  Its the (only) thing that ProTools can do quite easily (cmd & option)...

  Is it possible to do in logic?

  Thanks in advance,

  Dan

  As I do this is to highlight all the tracks in the console window and then click on choose the output on the first track while holding the Option key.

• Output of Simulator is not appropriate in an external display for Swift

  Hello

  I am a first time Mac user. Bought a Mac Mini to learn the Swift program.

  Version of the OS - OS X

  Version of Xcode - 7.3

  How to set the Simulator to show the correct output? After placing a button and the execution of the code, the button is placed in various different places for iphone versions.

  Ask this question in the Forum of developers for Swift: https://forums.developer.apple.com/welcome

  Xcode-click and highlight the fast focus groups. If you are asked a developer user name and password, it is your identifier Apple and your password.

  Good day.

• Vocals and guitars/keys using multiple output

  Hello

  I intend to play a CONCERT with MainStage 3 this weekend, and I'm trying to find a way to make it work. I sing and play on the keys or on guitars. I add a few effects on channel strips in the. I know I could put just outputs of the channels output material, but this will not cause me not to hear anything.

  If question 1.
  Is it possible to send a string to two independent outputs? for example 1-2 (as my monitor) output and 3-4 for the console?

  If not, question 2
  The other way, I'd do is just send it to THE then set out ancillary differently. Then the question would be - how to send it to the pre fader? So change me the volume will not affect what I'm doing on front

  If you like my so that you got through questions, there is another question asking why my voice sounds like the choir in my ears (as if there are two entrances with a latency, when there is one) I posted it yesterday, but nobody answered yet

  Hello

  "I know I could put just outputs of the channels output material, but this will not cause me not to hear anything."

  Why you say that? Who should produce sound...

  But let´s okay focus on your question.

  Use option 2 - create a channel at concert level and name such as keyboard and output than your 1/2 material on and do as well send you want.

  To choose the post pan, fader pre or post fader, just wait click in the shipment, and the options displayed.

  

  Hope this has helped you.

• My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  My Mac Pro is not turn on; There is power at the output, light or sound when I push the button 'on '. Any suggestions? Thank you

  It was AC off recently?

• How to get the creation Date of the site recorded for the footer output (printing to PDF)?

  If you go to Page Setup in Firefox, the option for the footer is the date and/or time of output. I don't want today's date that its print, but would rather than the Date of the creation of this web session saved as it is important to display this information with a legal matter. The research that has been done on a computer is out of date of creation down instead. I know that I could add the date by using the custom field for a footer in the Page options but prefer automated sound somehow when you print to a PDF (CutePDF). Please let me know.

  Thank you

  You might be able to automate this process if you open your PDFs with Adobe Acrobat Pro and make sure that the PDF file has a date of receipt:
  Idea of *http://smallbusiness.chron.com/print-date-time-stamps-pdf-55986.htm...

• Apple TV 4th Gen Audio output

  I want to play music through surround sound in the basement and also echo a speaker floor upwards.  I have both put in place, but the menu will only allow me to select one or the other.  Will there be a software update that will allow the selection of the output multiple audio.  In the end, it would give me a whole House stereo system.

  Thank you

  I don't know if this method works with Apple TV 4, but it is a possible workaround:

  http://www.iLounge.com/index.php/articles/comments/streaming-to-multiple-airplay-Haut-parleurs-de-Pomme-TV

  The link to the wing in the article is broken so use this one: https://rogueamoeba.com/airfoil/

  Or use Apple TV comments and tell Apple you want several speaker support.

  TT2

• Does anyone have a work around for the design on PowerMac G5 2005 flaw that causes noise interference on the outputs? (Audiophile, sound engineer)

  OK, here's my problem - I have a set of audio interface Protools Digi 002 via Firewire 400 on a PowerMac G5 I was lucky enough to be given last year. I finally managed to connect my home recording studio system, he wire of mixer etc, but when I listen to the music coming from the outputs of the Digi 002 there in a great cacophony of audio interference, so much and so well, when I mount the system I can move my pointer between two monitors and it plays a different frequency of buzz. Everytime I open a window, Soft etc it is more electronic noise.

  He took a while to limit, but after reading this excerpt from wikipedia, it seems that it was a fault common to this particular model until Apple released the revised version of the B of the G5 (?);

  ' The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] that sometimes causes noise seeps into the outputs audio analogue. This bug has been fixed in Rev. B G5.'

  and

  ' Well that the noise problems do not prevent computers affected work, they asked problems for audio professionals and enthusiasts as well, especially for models to liquid cooling, which had been expressly designed as mechanically quiet for listeners. "

  Well, that's no euphemism - in fact it makes the mac completely useless for my needs, I need the outputs clean digital noise to send for outboard effects/EQ/etc.

  As it was a common fault, I was hoping someone might be able to shed some light on a workaround solution, as I can't imagine recording ground studios just stop until this has been fixed by releasing a new G5?

  The only idea that I came up with so far is to buy a transformer of isolation, but I'm not entirely convinced that will solve the problem?

  Any help on this would be greatly appreciated!

  Thanks in advance

  Have you tried CHUD Tools & turn off NAP mode?

  The first versions of the dual processor G5 have problems of noise . The first is ground loop- based interference,^[5] , which causes sometimes analog audio output sound leaks. This bug has been fixed in Rev. B G5.

  The second problem of noise came from his "tweets", which can be triggered by power fluctuations. For example, display or hide the Dock makes a short beep. Many blamed the power supply used in the G5 as the cause, but this theory has never been confirmed. A very effective workaround is to disable microprocessors 'siesta' using Apple CHUD Tools, but this was not recommended by Apple. This noise problem has not set until the generation of dual-core G5s was produced, but it does not affect the model of "Late 2004" (at least there have never been reports). Draw of power fluctuation has been later attributed to the lack of power management features in processors simple heart. ^[6] Apple eventually posted information bug tweets on its support site. ^[7]

  Although noise problems did not prevent the computers assigned to work, they were problematic for audio professionals and enthusiasts as well, especially for models with cooling liquid, which had been expressly designed as mechanically quiet for listeners.

  https://en.Wikipedia.org/wiki/Power_Mac_G5

  Just one last note on the use of CHUD tools to disable the 'Nap' on the G5 Dual functionality: restart your machine reactive 'Nap '. You may have already seen this on the Apple forums. Kind of a bummer - although I rarely shut down my machine. In any case, running with 'Nap' off today seems to have resulted in a significant increase in general speed/responsiveness for me (I'm still running the stock 512 MB RAM, with another 1 GB on the way).

  «Matthew S.»

  http://www.xlr8yourmac.com/G5/G5_noise_tips.html

• No audio output

  My MacPro end 2013 has suddenly gone silent. In system preferences, it is said "no output device found".

  I tried the restart usual and checked that there helmet connected etc.

  Can someone help me solve the problem please?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

• The tab OUTPUT has disappeared from the top right of my screen.

  Also, I can't go full screen. None of these screen including output options are available on the upper screen right.

  I love this product. How can I get that back? Thank you

  John

  Try to rename (or delete) the file xulstore.json in the Firefox profile folder.

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• USB output and Audio fail

  Several days apart my audio output has failed and then doesn't have a single USB port. It's a question of remedy, or am I headed for a new logic board? I have an IMac 21 "end ' 09 running 10.11.5

  A bad USB device or a USB cable can simply triggered the USB port overload protection.

  First try to reset the SMC, according to > reset the management system (SCM) controller on your Mac.

  If this does not help, try again but this time unplug everything and wait a few minutes in step #3. Then test each USB port one at a time with a good working USB device.

  

• Output HDMI 2016 MacBook flicker

  I have two MacBook 2015 and 2016 MacBook,

  and I bought the original USB - C adapter AV digital Apple Multiport.

  I loaded the two MacBook with authentic versions of Windows 10 Pro with bootcamp partition split in half between Mac OS and Windows 10.

  The new MacBook 2016, while doing screen cloning using the adapter on Windows 10 Multiport,

  the output always sparkles, and the boss is always consistent:

  1.) Waking up from sleep, always flashes once.

  2.) and then will sway at least 2 to 3 times more.

  This does not happen with the MacBook, 2015,

  is it comes to the material of the new MacBook 2016 design flaw? Or is it a software problem (driver)?

  All the drivers are updated to the latest.

  I've updated the multiport to his latest 2.33 firmware card and the problem persists,

  Apple, please fix this...

• Change icon to dBm - output wireless

  Hello

  Does anyone know how to change the icon wireless in the menu bar to display the numbers of dBm - instead. I know that you can use the 'option' key and then click on the wireless icon, but I want to display the output of dBm - place of the wireless icon.

  I saw on a macbook in the past, but never had the opportunity to ask the person how they did it.

  This had to be a part 3 solution. iStat Menus maybe. Or MenuMeters.