No PCI card no working

Similar Questions

• no noise and the motherboard is not detecting pci cards

  Windows 8.1 installation failed due to corrupted iso file, then install windows 7. now I don't understand sound and motherboard is not detecting pci cards. everything worked fine before the windows installation 8.1.

  haven't installed the latest chipset drivers and the sound card drivers, stil no sound (mark of the Red Cross on the volume icon)

  motherboard: asus m2n - mx is

  What has gone wrong?
  How can I get my sound back and get pci cards running again? Help, please.

  Hello

  You must contact the Asus technical support to get the updated BIOS updated. Once that is done, try to install the necessary drivers and check the status.

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Additional information.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones.

  No sound in Windows: http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

  Thank you.

• Update of El Capitan 10.11.5 does card PCI does not work

  When I upgraded to 10.11.5 my PCI-424 card (it's a MOTU audio interface card) has stopped working. Rather than appearing as 'PCI-424 In' it appears now as "optical / digital» Ditto for out when I go to System - Sound preferences.

  I took the card and rebooted and it still showed the "digital optical". I put the card in another location and the same.

  Clearly El Capitan is not to recognize the PCI card correctly but I don't know how to do this.

  Also, I spent in El Capitan 10.11.5 10.8.5 Cougar.

  Help, please...

  Thank you!!!

  It's what MOTU has to say about it. You have the right driver?

  http://motu.com/NewsItems/motu-and-OS-x-El-Capitan/

• Satellite 5200 903: Mini PCI card does not work

  Hello

  I am a user of one:
  Satellite 5200 903: P4 - M 2.2 / 256 + 256 DDR/60 GB/15 t SXGA + / DVD - R - RW / nV FX 5600/SFP/WIFI ready/XP

  My computer is a Toshiba Wirless lan Mini PCI Card.
  I installed the card a few years ago - everything worked great.
  In early 2006, I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
  I installed all the drivers for the card of W - Lan, of course, the map worked in a good way (no driver incompatibility or other problems).
  But, and this is the reason of this topic here. It is not possible to connect my card to any hot spot. I tried with 2 different access points, but the result is the same. 'No connection Point found '.

  Does anyone have an idea of what to do or where I could look for failure? Is there maybe no special software required (I couldn't remember that I needed in my last installation special driver or software)

  If more information is needed, please let know me.

  (Sorry for the bad English, but it is not my first language.)

  THX for your help

  Hello Christian

  First your English is fine, and I'm sure that every user will understand what you want to describe.
  Back to your problem: the wireless card properly recognized and listed in the Device Manager?
  If so, please be sure that this card is enabled. Just that you should be able to see any wireless network.

  You n t need any special software. WIFI connection can be configured using settings in windows.

• Option Internet PCI card does not work

  Last week I had format my Satellite and I had installed Windows 7, 64-bit, but now the Internet PCI card does not work.

  It says that my Radio power is off, even if in reality is not.

  I had the same card for Windows 7 Version, but unfortunately Internet update for nothing.

  Please can you help me.

  Thanks in advance

  Can you please tell us which model of laptop you have exactly?

• Wireless Mini-PCI card does not work after installing it in socket

  I have laptop satellite A30, it has a plug for a mini PCI card.
  I buy a (chipset intel) and install the driver on the PC.
  The problem that I can not power on the wireless?
  There is a switch for this perpose on the side of the laptop, but when I change nothing happen!
  Also press the Fn with F8 button but nothing is also happening.
  I discuss this issue with other friends, they told me that there must be something in the BIOS and activiate/deactiviate the wireless, but I can't find anything related to map wireless in BIOS?
  For this I need your help
  Concerning

  Hi guys,.

  THX starbucks for the post, but I must correct you:

  As the wireless card in the mini-pci card slot is the only one, there is NO onboard wireless card. So it can't be anything to be disabled except the pci socket.
  And regarding the problem: perhaps the card is not compatible with this machine. I suggest to buy a card based on the atheros chipset because they are known to work VERY well (in fact they work) in almost all brands without bigger problems and they do in computers laptop toshiba.

  If the card was not recognized then another card must be installed-> atheros and not INTEL chipset

  Welcome them

• DVI PCI Card/s for G3 minitour

  I am a new Member of this forum and I hope that someone has the necessary answersI. I have a Power Macintosh G3 Beige minitour @ 333 MHz, and I'm on OS 8.5.1. There is a reason, I must stay with OS 8.5.1.

  I am wanting to know if there is a Dual-DVI PCI card that will work in this machine, so I can run two monitors via DVI in order to get a higher resolution than is available with VGA. My understanding is that VGA tops out at 1280 x 1024 and I need just a little more.

  If there is not an available Dual-DVI card that will work with my setup, how about two single DVI cards? If, by chance, there are two ways, that would be better and two monitors can also..., run off PCI cards without involving the port of regular monitor of the factory. If the port of the factory to be used, is there an adapter (or adapter cable) him/DVI.

  I know it's several questions, but get them out of here, in my first post may save some back.

  Thanks for any help, Tom

  Hi & welcome!

  In fact, VGA will give you more resolution than DVI.

  Radeon 7000

  The 32 MB memory DDR (Double Data Rate) will also help, allowing your computer to display very high resolutions up to 2048 x 1536 at 60 Hz if your analog monitor supports. Resolutions up to 1600 x 1200 are supported using digital flat screen, depending on the individual abilities of your LCD monitor.

  http://www.Macworld.com/article/1004789/radeon7000.html

  http://www.xlr8yourmac.com/graphics/radeon_7000_feedback.html

  There are faster cards still better, but more rare and the fastest I had were Formac cards, can have a couple somewhere here.

• Startup gets "Network cable unplugged" on (new) wireless mini-PCI card

  Repost in the previous topic was locked, but has not been resolved. Original post below, please see previous post for more details

  I recently installed a Netgear DG834GT wireless router and now have intermittent problems connecting my Tecra 9100. If the 9100 has been off for awhile (like overnight), when I restart I get always "Network cable unplugged" for the wireless connection. Reboot several times (anything from 3 upwards) I finally get connected to the router and everything then works fine for hours. Even a quick restart at this point (that is, once that the wireless adapter is connected) does not cause a problem, but as soon as I leave the stop of the machine during a time he fails again on restart.

  There are no errors in the event log.

  I am using wireless mini-PCI cards and have already updated to the latest version of the driver.

  Any ideas gratefully received, for now every morning is a 20 to 30 minutes of rebooting frustration trying to get my connection work.

  (Running Win2K professional)

  Hello

  I have the same problem if I stand for laptop and access point at the same time. If the access point is already in use, the connection is established shortly after. First the access point must establish a connection to the modem. Now the wireless connection is not available.

  I guess after the second reboot, the connection between the AP and the modem is already finished and you can use the network wireless successfully.

  Good bye

• ? PRO/Wireless mini PCI card will switch

  This question has been posted before, but I have not found a solution

  I have installed a PRO mini-PCI card / Wireless 2915ABG in my A30. It is recognized as a card very well, but I can't turn it on. Not with the switch and or the software.

  Any tips?

  Hi rothirgo,

  As far as I know Satellite A30 series is built with Atheros and Agere wireless card. This means that Toshiba has been test machines with just these two cards and do not support another manufacturer of the WL card for this machine. If you have the Intel card and good driver, it should work too.

  Is in the device, a problem Manager? When your card has been properly installed, go to control panel > network connections. If there is Wireless Network Connection showed that it should be enabled.

  If you do this, you can now search for available networks in the wireless network connection properties.

  Just one last question. You have wireless on / off switch on the left side of your laptop? What Wireless Card on FN + F8 check if there is an answer.

  Please let me know what you have done and are there any error messages.

• Pavilion P6520F: p6520f driver usb 3.0 pci card

  To make a long story short, with assistance from HP Support Forum's, I've recently restored to my Pavilion P6520F leave an 'upgrade' forced Windows 10, back to Windows 7.  Unfortunately, when I accidentally upgraded to Win 10, my card usb 3.0 pci card decided to die in the transition (not compatible with Win 10).  I replaced the card with a PCI-E DEGOL Express USB 3.0 Card 4 Ports and power connector 4-pin 5V for desktop computers [ASIN: B01FUE7IS2].  The map loaded and worked like a champ... Until I started Windows 7.  Now Windows 7 can not find a driver for it, and provided driver disk will not load a driver for Windows 7.  I contacted the seller, and they assured me that the card must be compatible Windows 7.  Is there a generic driver online of these cards USB 3.0 can I load to bring back my new card?  Unfortunately, I threw the old card, if I can't relive the Degol map, I'll have to buy a new card.

  All advice appreciated!

  Hello

  USB for Windows 7 drivers are the supplies made by the manufacturer of the card.

  You must debug the problem if the DEGOL W7 driver does not load. Generally, you will see an error code in Device Manager for your USB card. This could give you some advice.

  HP is not post drivers for third party material.

• HP Pavilion HPE h8-1150z CTO D: which USB-3 PCI Card

  I would like to upgrade computer (add) USB-3 to my existing. Which USB-3 PCI card (make and model) would be compatible with my computer?   Is there anything that should be avoided?   The card may only be installed or is there some other changes/upgrades necessary to make it work correctly?

  #HPExpertDay

  Yes, you can add USB 3.0, but it would work in 2.0 as the motherboard must be able to do.

  So you would need a powered USB hub.

• Tecra 9100 - W-LAN-Mini-PCI-card upgrade

  Hello everyone,

  I ve got a with the W-LAN-onboard Tecra 9100 working doesn´t.
  Instead of repairing the old W - Lan Mini-PCI-card I want to move to a new standard (802. 11 b / g with 108 Mbit/s max) Mini-PCI card.

  I prefer the mini Notebook-WLAN-Gigabyte GN-WIAG02 PCI adapter.

  Is it possible to chance the card built into the Gigabyte card?

  Hello

  It s nice that you want to upgrade your wireless mini-pci network card. But I suggest you rather a card with an Atheros chipset. The best choice is perhaps a card with a Chipset of Atheros 5005GS since I upgraded my Tecra 9100 with this card and it works like charm. (and not so expensive as other s cards)

  To swap the card, you must remove the plastic cover of the keyboard and unscrew the two screws in order to release the keyboard.
  After removing the keyboard, you will find an aluminum side cover left which is set with a special torx screws. The best would be to get these torx screwdriver to loosen this bolt and remove the cover.
  After removal, you will see the map with the cables that lead to the antenna. (One white and one black) Be very CAREFUL when remove the Connector cables, because if damage you one of the cable connectors there is no return since the cables are cables "Mini-coax" and cannot be "connected."

  I warn you, just do it if you're really sure and if you know what you're doing, because I won't take any responsibility if damage you something on your machine. Otherwise, I wish good luck and would appreciate some comments on your success.

  See you soon

• Satellite A20-S103 WiFi mini PCI card need help

  Hello

  I own a Toshiba A20-S103. When I bought the camera there not of wireless. I have the switch but wireless. I would like to install it but I don't like solutions card mainly because of the portruding antennas and special care, I imagine that you must have for such a solution (do not break the card because of the carelesness). Now, I opened my laptop and I have the empty mini PCI slot and the antenna cables. I found several mini PCI card on the Toshiba site in the communication options and accessories section. The problem I have now is that although I found two mini PCI card 802.11a/b/g, which seems to be compatible with my model, I can't decide which is the best because the information provided for each of them are the same. The only thing that seems to be different is the reference number (PA3318U-2MPC and PA3298U-1MPC). Also, there is a two 802. 11 b / g cards compatible with my model but even once, I can't make my decision due to the fact that the information provided for these cards is not helping to distinguish between them. Looking in the manual, I found that my model suports only 802. 11a / b (or at least what they say). And there's a mini PCI 802.11 g on the Toshiba site which is not compatible with my model. If it makes me wonder if I can get a card 802.11 g. I would really like it for the higher speeds that it will support. I don't want to pay more money to use a PCI 802.11a/b/g only to discover that I can just conect to 11 Mbps and not 54 or so... Also, I found on the internet of the 802.11 cards g that promise speeds greater than 54 Mbps. Toshiba provides such a solution? If not, are there maps 802.11 g third-party compatible with my model? I hope that there is someone out there who can help me sort this mess.

  Hi Stefan

  It is not easy to give you a proper answer. In my opinion, it should work, but it is also important to install a suitable driver for the wireless card. I'm sure that it is possible to install the driver for another model mobile using the same wireless card. It will be perhaps better to contact the Service partner and ask them because they have such information and more experience with this sort of thing.

• Will be GeForce GTX 750 Ti 2GB GDDR5 128-Bit card video work with HP Pavilion HPE h8-1010?

  Hi, I need to update my graphics card and I was wondering if this graphics card work with my HPE h8-1010.

  EVGA GTX of GeForce G 02-P4-3757 - KR 750 Ti 2 GB 128 - Bit GDDR5 PCI Express 3.0 FTW w / ACX cooling video card

  Everything on the PC is stock.

  If this would not work, please tell me why not so that I can pick up another card that meets the requirements.

  Thank you much in advance.

  Requirements for the EVGA graphics card

  • 300 Watt or greater power monophase.* *.
  • PCI Express, PCI Express 2.0 or PCI Express 3.0 compatible motherboard with a chart.
  • A PCI-E power connector 6 pin available.

  For the EVGA card you will need a power 6-pin PCIe connector. Your PSU stock doping likely not have one so that means updated POWER supply required. PSU stock is a little power for the treatment as well. EVGA said minimum 300 Watt, but the majority of gamers and enthusiasts use 450 Watts minimum. For your Carmel motherboard, I would consider a MSI Radeon R7 250, 2 GB, PCI-E 3.0, card DirectX 11.2 rather than unity of EVGA. With an upgrade of the power supply or video card should work without problem. POWER supply upgrade: I highly recommend Corsair as a choice of valuation gamer and enthusiast. Great price for the value. A Corsair CX430 or CX600 PSU would be a great choice. The price is also quite reasonable. The cards are in the following link

  

  NewEgg.com. http://www.newegg.com/Product/ProductList.aspx?Submit=ENE & N = 100007657% 2050001459 & IsNodeId = 1 & name = Corsair

• ASUS USB 3.1 PCI card in the Mac Pro 4.1/5.1

  Hello

  As the proud owner of a Mac ro 4.1 (updated to 5.1 and 2 X of Hexa-Core Xeon X 5670 CPU) I "suffer" a restriction.

  And it is now old and really slow USB 2.0.

  I would like to add a PCI USB 3.1 and I spotted the ASUS USB 3.1 PCI card.

  Of course, this card is given only as compatible with Windows...

  But I've seen a few reports of people claiming to have inserted this card in their Mac and have used successfully with several devices.

  It seems that these reports are under "Yosemite".

  I was wondering if they are always good with El Capitan...

  I put the card in the Mac.

  It seems to be recognized by the Mac Pro.

  In fact looking at the system information, under "PCI" give "Expansion USB card".

  BUT:

  -No USB key I have insert mounts;

  -No USB stick plug mounts;

  -my mouse lights

  -the keyboard does not work...

  So I'm wondering if:

  -El Capitan has got rid of the first USB support 3.1 to Yosemite?

  - Or if my card can be default somehow?

  -If this behavior can be caused by updates, I made (Mac 4.1-5.1 online) + 8-Core CPU-online 12 Core CPU?

  If anyone would be able to help me, I would be eternally grateful :-)

  If so, the card can be sent to the seller...

  Kind regards.

  FRED

  Hello there Penguiner.

  Looks like you bought the ASUS USB 3.1 PCI card and questions about its compatibility with your Mac Pro. The following Knowledge Base article speaks to the maps provided by Apple which have been tested and work with the Mac Pro:

  On the compatibility between Mac Pro-carte models graphics

  Since the ASUS card is not listed, the reference of the article could be a good recommendation to follow:

  This article applies only to video cards that originally shipped with a specified Mac Pro or upgrade kit have been offered by Apple. Similar maps that are not provided by Apple may have compatibility issues and you have to work with this card provider to confirm compatibility.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.