No. phones service smart blackBerry, cannot understand why.

My Blackberry Curve has currently no service, and can't firure why. For the record, I'm home, and I've always had the service before. So here's what I can tell:

* Instead of saying 'connected to T-Mobile' liike it usually does, on the front screen, it says: "failed to initialize."

* In the State of the Service, only the voice service says "emergency".

* In the Mobile Network Options, there my mobile network such as AT & T, but my network is T-Mobile, and I didn't AT & t at any time just by owning the phone.

Any help? The last time something like this happened was when I forgot to pay my phone bill, butI talked to T-Mobile, and is not the problem. Thanks in advance!

OK, so it seems that I answered my own question. I was still with my old phone SIM card, and he died. So I took one that came with my curve and has been change to T-Mobile to that one, and now it's great to be working again. Thanks for all the suggestions!

Tags: BlackBerry Smartphones

Similar Questions

  • Installation of phones Wizard smart blackBerry only allows me to implement the Exchange e-mail

    Hello:

    I have recently reactivated my old Storm for my wife (his first smartphone). After reactivation, I tried to configure e-mail so she could check her Hotmail, but the Setup Wizard shows only one option - business with Exchange email. I know when I use to use the storm myself, I got the Hotmail and a POP e-mail account set up with no problems. What is a device problem or a problem of carrier? I had Bell activate the storm on a BlackBerry data plan (200 MB) minimal and the phone seems to work correctly (as a phone, at least!)

    Double checking with Bell that he is registered on the SIM card and its account.

    You will get the personal set email icon once it is bound.

    Sometimes rebooting helps make the 'connection '. Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for a minute and then reinsert the battery to restart.

  • TypeError: Error #1009: cannot understand why I make it

    Hi, I keep getting the error above, Error #1009: cannot access a property or method of a null object reference. and can't understand why I'm getting it.

    I get it in the last line of the following function:

    public function frameEvents (): void

    {

    _playerClass.update ();

    _playerClass.render ();

    _playerClass.updatePlayerShot ();

    _scroll.update ();

    _collision.playerVsGround (_playerClass, foreground1);

    _collision.checkBullets (_playerClass.playerShot.playerShot.bitmap);

    _bigTurretOne.update (_playerClass.xPos, _playerClass.yPos, _scroll.scroll_Vx, _scroll.scroll_Vy, _bigTurretOne.x, _bigTurretOne.y);

    _bigTurretOne.x += _scroll.scroll_Vx;

    _bigTurretOne.y += _scroll.scroll_Vy;

    _bigTurretOne.render ();

    _bigTurrShot.moveMissiles ();

    _collision.checkMissiles (_bigTurrShot._missile.bitmap);

    }

    When I trace (_bigTurrShot._missile.bitmap) I get [object bitmap] so it is not upward with the null value when it's mapped. Everything seems to be OK in the other code I have for it, anyone have any idea why I get the errror?

    It is reactionary and not very elegant but check if the object is not null before accessing its property. If _collision.checkMissiles(_bigTurrShot._missile.bitmap); is giving the null object error, try

    if(_bigTurrShot._missile != null) _collision.checkMissiles(_bigTurrShot._missile.bitmap);
    

    (You have not shown enough code for an "adequate" solution)

  • Phones calls Smart blackBerry does not and cannot text

    Hello

    Since Friday, I was unable to take a phone call for more than 20 seconds and not able to send text messages. The call fails each time exactly 10 or 20 seconds. This requires that the call is incoming or outgoing. I tried to pull the battery and that solves the problem temporarily, but it usually returns in about 5 minutes. I am able to receive text messages.

    Phone Info:

    Carrier is Bell Mobility

    BlackBerry Bold 9000

    OS v5.0.0464

    Thanks in advance.

    Thanks for the advice, I visited the Bell shop today and they recommended a new SIM card. This solved my problem.

  • List of phones calls Smart blackBerry & and email delivery problems.

    Hi all

    I am the owner of a BlackBerry Curve 8520 user. I am based in Trinidad and Tobago. I have connected E-mail three suppliers, tstt/outlook express/google handset, yahoo mail and Hotmail.

    The handset is synced with my computer. I run Windows XP Pro SP3.

    My camera has worked perfectly up until a week ago I noticed that emails from three suppliers mentioned above began to appear in my list of phone call. Most of them do not go to their respective places, or if they do, should I try to remove from the list of calls they are also deleted from their respective places. It is now a gene as e-mail does not appear in the list of calls. At least it's never happened before.

    I will be really grateful if assistance can be given through your forums to alleviate the problem.

    Thanking you.

    standeb

    standeb wrote:

    Let me say that apart from the accounts of three e-mail on my home screen, there is also a message icon that appears to show all messages that include all phone calls. If this is the case, the gap is my fault, for evil to understand how works the phone and my fears were unfounded, which leads me to the conclusion that my apologies for the inconvenience caused to you and the community/forum are in order and is hereby duly extended.

    I enjoyed reading your response; wonderfully polite and excellent use of the language. A refreshing change from text to speech and requires instant solutions.

    There is no downside whatsoever.

    Now, I think that you have rightly identified that your being unfamiliar with the device is the cause of your problem.

    The message file you reference, ideally receives notifications of calls, emails from all accounts linked to your device. It's an icon of useful to have on the home screen so that you can see in 1 click messages etc., thus leaving the remaining space on this screen for icons other than the e-mail accounts.

  • How can I remove my 9330 phones BBM smart blackBerry?

    I searched here and on the Blackberry website and can't seem to find one easy way (or another) to remove the BBM on my phone.  Almost every app I downloaded another is VERY easy to remove if unwanted, why is abduction of BBM such a big secret?  It gives me flashbacks to Windows 98 and the HUGE concern, it was to get rid of some software.  Why can't it be just one option "delete!"

    OK... EasyForYou way worked for me before... try it.

    Use your BlackBerry browser to go to http://blackberry.com/blackberrymessenger and download/install again the Messenger application.

    This should make the BBMessenger app an add-on application that can be removed.

    Then, go to Options > Applications > Add on and go to the mail app and click on it, just highlight it. Click Menu > delete and remove the application.

    After the removal, you may need to restart the device again.

    I hope it works for you.

  • Phones accessories smart blackBerry not opening

    I realize that some have had a thin problem, which some I hope I helped, but all of a sudden my attachments will not open. This includes jpg, word, and pdf files...

    Did a reboot. Always the same. A peak have suddenly opened at some point, even a single pdf, but without logic, others do not. Generally small files sizes.

    paultf wrote:
    Referring to the updated EA/blaxkberry system I guess, not the daily application updates.

    Once again, your assumption not made as our more difficult to guess. Clarity, it's what we need if we want to be able to help at all. We understand you, nor your device and have only your words to guide us. Consider, if we misunderstand your situation, we may give you advice very wrong and very harmful indeed.

    What version point please? Check in the settings > about phone > Build number

    If, as you seem to say, everything was fine, then this update installed and then the problem appeared, and what you have tried so far is the unique restart method, then I recommend now other reboot methods provided previously.

  • Phones IMEI smart blackBerry

    My phone company Bell says I have to contact Blackberry so they can block the IMEI... How can you actually communicate with Blackberry?  I need to write and mail a letter?  Customers may not cause any direct contact with BB?

    It's hopeless.  Neither Bell or Blackberry can do anything. The phone can be unlocked and even changed the IMEI number.  I'm still angry at Blackberry to have no central depository of serial numbers stolen as a deterrent.

  • Problem of phones ringing smart blackBerry

    I had a Blackberry with verizon 8130 and it worked fine, but he had a problem with the internal usb, so I got a replacement phone.

    I'm a new, and everything was a lot. Except when I started to receive calls. I could not hear a ring tone. I've been getting calls and the setting was Loud. and for assigning phone was on vibrate & tone and I got a blackberry ringtone set. So, I double checked to see if it was just me.

    I did the battery pull Tower, but it did not work.

    I made the scroll to about 70 tip ball, and that no longer works.

    CAN SOMEONE PLEASE HELP!

    Mine actually did this not so long ago.  My husband removed the battery and the sim chip and then put back them in about 5 minutes later and it was OK.  Has been since...

    Good luck.

  • Name of the contact phone no. smart blackBerry during the next call - only phone number is on the screen but without the name of the contact.

    Ciao,.

    do you know how to solve this problem, probably I incorrectly somethings?

    Thank you all

    It could be one of the three solutions... Try these:

    1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.

    Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.

    * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

    2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.

    * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

    3. you probably have "Content Protection" located on your address book.

    Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

  • Contact phones number smart blackBerry when rings

    When my phone rings, it shows the phone number of the appellants, but it will not show the name if they are in my contact list. Finished the call name contacts indicated in the call log, just don't no when sounds. Any ideas? Worm 4.7.1.57

    It could be one of the three solutions... Try these:

    1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
    Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
    * In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

    2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
    * For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

    3. you probably have "Content Protection" located on your address book.
    Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no

  • Phones ringtones smart blackBerry suddenly all failing same 3-note tone and won't let me change any of them. Help!

    Hi - I turned on my BB Storm 9530 (w/.75 update installed over a week ago) today, and when the emails / calls started coming, I learned to my dismay that ALL on my Storm now default to the same note played three times, looks like someone typing press the same piano three times.  I go to my sounds to edit and my phone and various emails have different ringtones listed, but when I click "Try It" on the edit page for ringtone, all I hear is the same monotonous notes 3 regardless of the ringtone is selected.  I tried selecting other ringtones by default (I don't have those personalized yet) and economy, but the result is the same; I can't have my phone or e-mail accounts to play unique sounds now.  What is new as of today, and the only thing 'new', I did it yesterday is finally put some music files on my Storm and asks him to warn me when I connect it to my pc, in case I want to use the mass storage mode.  I noticed that you are trying to use my pc system tray icon to release the storm after moving media files gives me a "(Busy--essayez à nouveau plus tard) while I had to stop the pc with the BB still attached."  But I tried to change the ringtones when they are disconnected, and nothing changes.  Does anyone have an idea how I can regain my ability to select & play different ringtones?  I do not see why the turn on the storage capacity of the media would cause this problem, unless I stumbled upon another bug of Storm.  Can anyone help?  I really need to know when I get a call or an email.

    THX!

    Drew

    Hey, thanks so much for answering.  I actually had already implemented some of the ringtones by default system for my family members and e-mail accounts, so it wasn't the problem.  They were working on Monday.  By my original post, as of yesterday, any ringtone was entered for an item, all of the pieces read all of a sudden the same monotonous alert 3-note, and no amount of attempts to change a ringtone fix it.  I managed to stop yesterday afternoon at a Verizon Wireless store.  The young woman at the counter suggested I remove the battery, wait 30 seconds, then reinsert it (a "fix" I seem to see on a lot of forum posts!).  Of course, forcing difficult starting restored power to the storm actually play different ringtones that I had associated the various names/emails.  True, I had to reset my desktop wallpaper and preferencesoot after the hard b keyboard, but nothing else was lost, and I am happy to have different ringtones works again.  Of course, I would like to know why the ringtone feature suddenly stopped working properly yesterday.  I like a lot in the storm, but it is very buggy and patches do not appear to come often or quite quickly.  We will all see over time, I guess... Thanks again for writing.

  • Phones ringtones smart blackBerry

    Hello
    I have a blackberry priv. In the past it I can give each of my contacts an individual ringtone. Now, I think that after an update of the system, I always can give each contact a separate tone, but any time someone calls me, he has only the same "standardringtone."
    Someone do now what I can do that the correct sounds are played again?
    Thank you.

    Hi @Dschinges

    This problem has been resolved in AAF518 so I'll mark this reply as the solution. Thank you!

    38259 'set ringtone' and 'All calls to your voicemail' settings restore default settings after the upda...

  • Use of memory Windows 7 - excess and I cannot understand why

    I have a Windows 7 computer with gigabytes of RAM, which should be more than enough for a user like me. However, my computer has sometimes slows down, so I used the Task Manager. I discovered that too large amount of memory was used. This has steadily increased. Now, when I start my computer, my memory usage starts at 38% of the amount of space available and then increased to about 45% of the memory. The culprit is not a virus, as I did several malware analyses, nor is it a memory problem. Task Manager and performance monitor data just came over me, and I can't find the root of the problem. Can anyone suggest a solution or a way to understand the problem? Thank you!

    In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

    If you have any questions do not hesitate to ask

    Please run the trace when you encounter the problem
  • BB phone charging smart blackBerry 9780

    New replacement BB 9780; new battery.  Plug it into the wall and orange charger flashing told me I have a low battery.  Orange flashing stops after 5 minutes or more.  The charger from one day to the next.  Unit does not charge and the battery icon shows the battery is very low then turns red.  Use generic wall Chargers that work with other devices.  Thank all the advice to get the 9780 is working again.  Thank you very much!

    "Other devices" do not require the absorbed current BlackBerry requires.

    Pick an OEM charger.

Maybe you are looking for

  • LabVIEW 8.6 - cannot save or change vi. crash - error-

    Hello In the last months I was constantly using Labview to performsome data acquisition and treatment of the relevant signal. Today, however, I can not get anything because of a series of errors. When I open my last (attached) vi, it works very well

  • My Network icon disappeared

    original title: lost my network icon The lost network icon. Other systems, for example "network and sharing Center" also could not go in the system.

  • Backup Windows Mail .eml files

    I have found and saved my files of .eml to C:\Users\Bob\AppData\Local\Microsoft\Windows Mail\Local folders a few months ago, however, when I try to save it again, I'm not capture my most recent emails. The e-mail messages were all abandoned in the re

  • features of vBundle/speed for physical host computers

    I was wondering if a cartridge is available, or if someone is using vFoglight for host computers physical montior and are you able to generate reports, dashboards, etc., with the same level of detail as you can get with vFoglight with vBundle and/or

  • Possibility of Waas designed

    Hello all. We have a depolyement, and here is the topology scenario: We have many user branches that tries to access servers in a data center.  but the problem is, branch and Datacenter WAE are not registered in the same CM. CM - 2 is not the replica