No power when on battery

I have a W700 and recently he stopped running from battery. Reports on a 2/3 battery charge, but it does not go higher than. I replaced the battery and it has almost no cost, yet once no loading takes place. When no battery is connected, the Tablet shows no battery detected, then the PnP functions are still working.

I see no sign of damage to the wires or connections. All connectors are plugged in.

I replaced the drive mSATA months, which works very well, but who killed any chance of a warranty.

If anyone has any ideas, let me know. I doubt that I'll pay to get it fixed because I just picked up a Surface.

I opened a little further and found a connection not tight on the underside of Mo. I must have not quite broken in when I changed the route and it worked its way loose a few months as he was transported across the country.

Tags: Acer

Similar Questions

  • Use of AC when the battery is at 100%? (S7-391)

    Hello world!

    I have been affected by the worst support from Acer, I have no problem with the ultrabook himself (Acer Aspire S7-391) but I have some doubts about pilots and other things, that they have avoided answering many ways. So, here's the thing:

    This ultrabook has all drivers that could be use the AC power when the battery charge reaches 100% to avoid tampering with the battery?

    The thing is that while I have 100% of the battery and the ultrabook is connected to the power adapter, it always seems to be draining the battery power and recharging it back to being 100% all the time.

    When I ask about the drivers, who might or might not be installed, I just need to find a way to access this functionality if possible, and if I can't, I need to know as soon as POSSIBLE so that I can start unplug the laptop right after that the battery has reached 100%.

    Thanks in advance.

    As you said with Connector 2 power pins can also disconnect the battery charge. It can disconnect the power supply from the battery charging circuit when the battery reaches a particular % with the laptop running load in power cables. I do not think that your computers support portable setting the level of charge of battery to a % custom. Your laptop must have a particular hardware and BIOS that supports. In some laptops, the BIOS has the ability to define a particular % of battery charge. I read somewhere that windows 8 do not support this feature, old version of windows (Vista) support this feature.

    Some write up I found online to help you.

    Memory effect

    First of all, it is necessary to unfold a myth that persists in the minds of many people.

    The effect of stack memory.

    In the basis of lithium batteries, it is in fact a myth, it applies only to the old nickel-based batteries. Therefore fully discharge and recharge the battery are completely useless and even harmful as discussed below.

    The modern lithium battery can be charged independently of its current percentage, because he has absolutely no negative effect in his performances.

    Should I remove the battery when the a/c is connected?

    Many users of portable computers have this question and we will answer it right now:

    The answer is: YES and NO, it depends on the situation.

    Have a fully charged battery and the laptop is connected is not harmful, because as soon as the load level of 100% of the battery stops receiving the energy load and this energy is shorted directly on the power of the laptop system.

    However, there is a downside to keep the battery in the holder when the laptop is plugged in, but only if he currently suffers from excessive warming caused by the hardware of the laptop.

    So:

    -In normal use, if the laptop does not get too hot (CPU and hard drive around 40 ° c to 50 ° c) the battery must remain into the Jack of the laptop;

    -Intensive use, which leads to a large amount of heat produced (i.e. games, temperatures over 60 ° c) the battery should be removed the socket in order to avoid unwanted heating.

    The heat between the fact that he has 100% load, is the great enemy of the lithium battery and not the plug, as many might think so.

    Battery discharging

    Full battery discharges (until the computer laptop power shutdown, 0%) should be avoided, because he insists a lot on the battery and may even damage it. It is recommended to perform partial discharge to levels of capacity of 20 ~ 30% and frequent accusations, instead of performing a complete discharge followed for a full charge.

    Laptop PC battery contain a gauge of capacity that allows us to know the exact amount of stored energy. However, due to the charge/discharge cycles, this sensor tends to be inaccurate overtime.

    Some laptops include in their BIOS, tools to recalibrate the battery meter, which is nothing else than a full discharge followed by a charge complete.

    So to calibrate the gauge, it is desirable, in all cycles 30 discharge, a full uninterrupted discharge, followed by a too, non-stop, full charge.

    An inaccurate gauge may have to the fact that the capacity of the battery are values are false. The battery can report that he still has 10% of capacity, when in fact it has a much lower value, and this causes the computer to the unexpected shutdown.

    Cycles of discharge (or charge) are to use this charge battery (100%), but not necessarily all at once.

    For example, you can use the laptop for a few minutes in a day, using half of its e ability then it load completely. If you did the same thing the next day, it can be considered a discharge cycle, not two, so it may take several days before finishing a complete discharge cycle.

  • HP DV6-6B25TX turn off after 10 to 15 seconds, regardless of the power of the battery or power supply

    Hello

    MY DV6-6B25TX is cutting off after 10-15 seconds, regardless of the battery power or AC power.

    Here's the complete scenario of what happened in recent weeks:--

    Two weeks back I was using the laptop with the power adapter is plugged in for charging, the battery got charged up to 99% then it stopped charging and display the battery icon text, "plugged in, not charging".

    A return of the week, the battery was 20%, after plugging in the charger, always the same message "Plugged in, no charging current".

    Now the laptop does not meet the key power when the battery is inserted.

    If I remove the battery and back again, it starts without pushing the power button and turns off after 10 seconds, well before Windows starts.

    She stops even on the Bios screen, OS is not definitely the question.

    When I plug in charger and press the power button / stop, the same thing, i.e. starts and shutts off after 10 to 15 seconds, regardless of the BIOS or Windows startup screen.

    I removed the ram and but again, but the problem still persists.

    Also there is no issue of overheating due to dust, as I've barely used the laptop for a few hours, the phone is about 6 months and under warranty.

    Please advice ASAP.

    Thanks in advance.

    Honestly, something prevents the battery charge. Computer laptop closing seconds after that reinsert the battery is a good indication the battery just is not getting charged. This could be a battery failure, charger, port, or in rare cases of charge motherboard.

    Since it's under warranty, I recommend you contact HP support that there is no easy solution for this on the forums. It's a hardware problem.

    The number of the Canada and the United States support is 1-800-474-6836.

  • Laptop HP ENVY 15 TS: My laptop HP envy 15 TS used power when the AC adapter is connected to the battery inside

    My desire to turn with pluged ac adapter and the battery in the laptop... I tried the charger and its fine... the power outlets are also very good... the lamp beside the AED charger on not even when the battery is inside the laptop... as soon as, I get out the battery with the charger plugged, the light comes on then and the laptop then turn on when I press the power button.  It loads for a few seconds and stops when the laptop is turned on without the battery and I have fix the battery in there. I do not understand this because the battery lasted for four hours without plugged the previous night and when he so weak and I wanted to load this problem... pls need your help guys... Thank you

    Hi @Manaseh_Tello1,

    Please become a member of the HP's Support Forums. I understand that you have a problem with the computer that you want to start with the battery connected. I'll be happy to help you.

    Please post the complete product and the operating system on your computer. Check out the following, if you need assistance with this information.
    How can I find my model number or product number?
    Is the Version of Windows on my computer 32-bit or 64-bit?

    Will you please get back to me with the information above, so I can help you better.

  • New laptop password AC power to the battery when you play a game.

    I got an IdeaPad P580 (i7, HDD 750 GB, 8 GB of ram, nvidia gt 630 m) a few weeks ago. A week ago I started having this problem where whenever I play a game, he's going off the AC power and the battery or vacillates between the two.

    He did this in Grand Theft Auto IV, Fallout: New Vegas and same Minecraft. Sometimes even outside of the games, but this is rare. After closing a game once, he would be off AC for a few seconds every time I opened a new tab in my browser!

    It doesn't matter what mode of energy that I use. The latest graphics drivers are installed. No matter if I use the Nvidia card or disable it in the bios and use the integrated Intel graphics card. I have tried everything I can think; I plugged the AC adapter into a wall directly instead of a surge protector, etc..

    When the laptop is, there are three lights on the front under the touchpad. The two left are usually, but sometimes when it produces in the Middle it turns red.

    If I remove the battery and just use the AC, the laptop just shut off after a second or two in the real game.

    Someone at - it ideas? Nothing at all, even if you think it's a long shot. It of frustrating to buy a new laptop and then happen, especially since the problem with my old laptop has been playing games would cut (which was overheated, which appears not to be as it is not hot).

    Hmm. you have no overclock your right to gt630?

    cutting like that usually means not enough power is supplied by the power brick, or the connection is loose.

    How many watts is the power brick?

    If the power is firmly connected, first thing to do is call lenovo and ask them to send you a new power brick.

    If the problem persists, you may have a bad mother power connector. It could be opening itself, or the connector on the motherboard.

    How many times you plug and unplug the power cord? and you do it with force? If you are not sweet, the brackets that hold the power port may crack.

  • Presario CQ20-320TU: my notebook (presario CQ20) directly turn on when I plug in the power cord without battery

    My laptop (presario CQ20-320TU) turn directly every time I plug the power cord without battery. What is the solution?

    Hi there @emonsonjaya,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that your notebook is turn on/off automatically when it is plugged. I'm happy to help you.

    I would recommend that you look at your BIOS, especially in power options and check if your BIOS has a setting option on automatically. If yes it change at your convenience.  Another option would be to update your BIOS and see if that solves it.

    Here is the page of support for your model and, if necessary, give it a try, it will automatically download the file if you click on the link. You then need to run the executable file of your current download folder.

    HPQFlash for HP Notebook System BIOS (68PHU) - Microsoft Windows-Based

    If you are having problems with an update of the BIOS, you can always restore it, using the following:

    HP Notebook PC - restore BIOS

    I hope this helps.

  • The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available.

    The battery on my Toshiba NB500 has not been charged since one should use it when you are connected to the power. The battery in the tool bar icon indicates charge but is always 0% available. What could be the problem and how can I solve it?

    A problem better put to the support of Tosh or their forums, with regard to their equipment, not MS or Win

  • Power HP Pavilion g7-1310us ca not detected when the battery is installed.

    OS: Windows 7 64-bit Ultimate.

    When AC and battery power available, the laptop wants to run on battery. Test the battery with AC plugged ends upward with a message similar to "the battery is OK, but the test did not complete because AC is not plugged.

    When the battery is removed, the laptop works fine on AC.

    Unplugged AC and battery, power button that is held for a minute, reconnected battery and HQ - the problem persists. Tried removing / reinstalling compatible Microsoft ACPI control method battery driver - did not help either.

    The laptop runs all the BIOS the most recent and the software updates that have been available through HP software support support.

    Center of Service HP solved the problem by replacing the AC adapter

  • How to control automatic shutdown when the battery is discharged using Windows

    The laptop stops right in the Middle something without notice.

    Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

    I don't think that the cause of the problem is the power management because it is set to balanced.

    How can I control when the pc stops?

    Hello

    Usually, you can change these settings within the Windows power management.
    Using Win 7 or Win 8/8.1?

    Here is the Nice technical document about the features of Windows 7 power management
    http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

    Check the last option called: battery.
    It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

  • L50 - B satellite will not start when the battery is completely discharged

    Hello

    My Toshiba L50 - B won't start when the battery is fully drained but connected to the power outlet.
    I try to work most of the time on the battery to keep the battery in good shape, but when I forgot to turn off the battery drains and the system will not start when I plug in the adapter.

    The battery charge indicator is orange light as it should. Only when the battery is fully charged to 100%, it will run at startup and function normally after that. I tried to turn on the laptop several times during the charge cycle, but only when the charge indicator changes from yellow to white it starts. Tested for 2 bodies.

    My old Toshiba always immediately turned on when I plugged the adapter even when the battery has been completely drained. Am I missing a setting somewhere?

    Thanks for responding... I hope well :-)

    Toshiba L50 - B
    Windows 8.1
    Any standard/original setting since I only acquired this laptop a month ago.

    The laptop should light up if the power adapter is plugged in and power the laptop corectly any if the battery is empty or during charge.

    Please check the version of the BIOS that is available on your mobile phone and compare with the BIOS available on the page of the Toshiba UE driver
    Maybe you need to update the BIOS, but to be honest, the history seems really odd to me and I m afraid that there could be some power supply electronic problem

    So in the worst case, the laptop must be checked by authorized service provider.

  • Satellite A85-s107 - white screen at startup by using the power of the battery

    Satellite A85-s107 white screen at startup by using the power of the battery

    When I boot A85-s107 in battery power, it is get booted up in the background, but my screen is empty.
    After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

    There is no problem when I start upward when it is connected to an electrical outlet.
    Battery is fully charged and computer will work off the battery voltage if I remove AC after boootup

    Any suggestions?

    PS:

    also note that when I remove AC and then reconnect I start the computer on two occasions that it does not start the 1st time?

    Don t need to recharge the battery if the AC adapter is plugged ;)
    Try the tips posted by Alex otherwise it of a hardware problem, in my view, there seems to be something wrong with the motherboard...
    In this case, only the replacement could help and it could be a costly affair

  • Satellite A500 - 17 X white screen at startup by using the power of the battery

    When I boot A500-17 x to the power of the battery, it's get booted up in the background, but my screen is empty.

    After that if I connect it to AC power and switch deactivation/activation of the laptop power button, the screen comes back to life.

    There is no problem when I start upward when it is connected to an electrical outlet.

    Any suggestions?

    Hello

    Very strange problem
    Have you noticed this problem from the beginning?

    First check if your BIOS is up to date. Updated the BIOS if the new version is available.
    In addition it would be recommended to update the display driver.

    But if two updates don't change this, then I recommend you contact an ASP in your country. It could be a hardware problem.

  • Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low

    Dv7-3165dx notebook computer unexpectedly shuts off when the battery is low. Even at 17%.

    This gets really annoying, that I keep losing jobs! Before it used to give me a warning and then Hibernate. Now there is no warning and it turns off without saving anything.

    Help!

    The laptop is a year old.

    I already ran the diagonsitic battery and it said the battery was good.

    OK, I think I finally figured it by changing power options, and I think that the way you reset the battery also helped.

    Here are the parameters:

    reserve battery level (this is when the popup will appear).

    10%

    low battery (this is when the low battery action will be performed).

    8%

    critical battery level (my computer would die at this point.)

    7%

    low battery action: sleep, sleep (this customize to your liking).

    battery low notification: on (hold on).

    critical battery action: sleep, sleep (my computer died already in criticism.)

  • Camileo H20 will not come to the top with the power of the battery

    My Camileo H20 won't be to point to the power of the battery. It runs on AC power when connected to the charger. I noticed when I press battery/memory sometimes, it happens on battery showing - TOSHIBA - but goes out as soon as I stop fastening lid close the card cover. Bad contacts with battery maybe?

    Any ideas?

    Hello romancos,

    have you noticed, there is an insulator on the battery?
    It protects the battery while shipping to the France.
    If you don t have, please delete.

    If the issue continues, please try another battery.

    welcome them

  • Satellite C660 - WLan disconnects when on battery

    Hello

    Please forgive my ignorance on this, but I'm just trying to establish whether the problem is with the laptop.
    I recently bought by Satellite C660. I loaded the internet as I have done with so many other pc, and if the charger is connected (even if does not load) I can connect to the internet and keep in touch without any problem.

    As soon as I remove the CAP, because obviously, I don't want to keep plugged in when the battery is full - I lose the internet connection - comes with limited access and that's it, impossible to surf.
    It can be something completely stupid that I have or have not is but I really would like help any with this question that it's starting to stress out me.

    I also tried other internet devices that seem perfectly ok and my signal is excellent.

    Please help, thanks in advance

    Hi mate

    Please take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=59177

    You can solve this change of economy option WLan Card in Win 7 the power supply management.

Maybe you are looking for