NO PRINT HEAD IS AVAILABLE!

Similar Questions

• Damaged print head.

  On a HP Photosmart Plus B209a.  I get a new error message "printhead installed is not intended for this printer or any damage.  The print head is unchanged.  I have cleaned several times with of water distilled.  He had a lot of use.  Does anyone know a trick to keep alive?

  Thank you

  I'm afraid you've actually done all you can.  You need to either replace the print head or the printer.  If a print head is available for your printer, you will only to be able to buy it through HP technical support.  You can find by following the link below.

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-tech-support-number/m-p/1792045/highlight/true#M41468

• Problem with the HP Officejet Pro 8500 printer: clean the print heads each time it is turned on

  Hello everyone,

  the printer HP all-in-one Officejet Pro 8500 (A909a - product n. CB022A) clean the print heads whenever I turn it on. This problem affects any HP Officejet Pro 8500 printer, it is not a problem only of this one I bought. It is a boring bug and annoying because each power clean print heads on involves two bad disadvantages:

  1. waste of ink (each heads cleaning process consumes little ink);
  2. too much time (2-3 minutes) to prepare the printer after plugging.

  I upgraded my printer with the latest firmware available on the HP site (firmware ver. DLM1FN1006BR), but the bug is still present.

  At this point, I ask:

  1. There is a way (or procedure) to disable automatic cleaning this useless to all power on?
  2. Can we communicate with the HP engineers or tell me how to contact directly one of them to indicate the bug and request a new firmware updated?

  Please don't tell me to leave the printer on all the time or that the printheads to each cleaning power is normal behavior! Where then are power and ink savings claimed for this printer model?

  I hope that a solution to this problem. Thanks in advance to everyone will help me!

  Maintenance when the printer is turned on is normal and is required to keep the printheads in good health (not blocked). See here for more information.

  With respect to energy savings, the printer automatically goes to low power mode when the don't feel not for awhile.  It is not necessary turn the unit on to save energy.

• HP Officejet Pro K550: Software to clean the print head

  I need tool box for old HP printer: HP Officejet Pro K550, for 10-64 bit Windows.
  I need a software tool to clean the print head!

  Hello

  The HP Toolbox software is no longer available for your printer for any later OS such as Windows 7, 8 or 10:

  http://support.HP.com/in-en/document/c03467279

  You can align, clean and calibrate the printhead from the printer itself by using key press combinations.

  See page 33 on its manul below to perform all the tasks of cleaning for the front panel of the printer, such as the cleaning of the printheads:

  http://h10032.www1.HP.com/CTG/manual/c00501024.PDF

  Kind regards

  Shlomi

• OfficeJet Pro 8600 Premium: OfficeJet Pro 8600 Premium - questions of print head

  Turning my printer this morning the display shows an error message "ink system failure".  I followed the instructions to reset 3 times with no luck.  I still get the same message.  I spent 2 hours on the HP parts store, trying to find a replacement printhead with no luck.  Where can I find the correct print head, ref replace, etc. so I can get this printer working again?

  Welcome to the HP Forums @tntipsy,

  I came across your post on the message 'Ink system failure' you see on your premium 8600 Officejet and troubleshooting, you have tried and are currently looking for a new printhead. My personal suggestion would be for you to contact HP directly to discuss a printhead or even a replacement unit. I would honestly suggested a replacement unit on a replacement of the print head, just in case where the same problem occurs with another print head. Details of HP are below for you!

  If you have trouble, let me know and I'll do my best to help.

  Click on the "Accept as Solution" If the issue reached a resolution! Hit thumbs up below like my post or show thanks to me to lend a hand!

  Have a nice day

  HP technical support are available by clicking on the following link:
  
  http://h22207.www2.HP.com/us-en/?openCLC=true
  
  (1) once the page opens, please select the country in which you are located. Then enter your model of HP on the right number.
  
  (2) then choose "Contact the Support" tab at the top and scroll to the bottom of the page "HP Support - contact" to fill out the form with your details.
  
  (3) Once finished, click the "Show Options" at the bottom right.
  
  (4) Finally, scroll to the bottom of the page and select "Get a phone number." A file number and telephone number will now fill for you.

• What is the part number of replacement for a HP6350 while a photo printer print head?

  I 6350 printer that is less than 2 years old and the print head will be no printing cyan and magenta and fails alignment.  I cleaned the print head several times through the diagnostic tool.  I even manually cleaned using water with no luck.  HP says that it needs a new print head and is not available due to out of production!  What happened to make parts for 7 years as IBM!  I won't buy another new printer every two years.  Home use photo printing and small documents.

  XP Pro OS on an IBM Net Vista suystem.

  The print quality report states:

  Model number: HP Photosmart C6300 series

  Serial number: MY93N9F0GB0544

  service id: 19135

  area of the printerPX): 2

  total number of pages 2052

  firmware: EVM1FN0836AR

  patch review: 10

• HP Officejet Pro 8600 Plus: problem of print head

  Have had this printer for a couple of years without any problems.  All of a sudden getting the message: printhead appears to be missing, not detected, or incorrectly installed. Lived all the recommended diagnostic checks but still a problem. I got it working the first time but then after a few days print message pops up again. The message won't let me come back to the homescreen on the printer.  I took it by a realignment and the printer prints a test page. If the printhead has been the problem, then I thought that he would not be able to print a test page. Any suggestions?

  Thanks for your support Gemini02.  As well as through the HP recommended diagnostic tests I blush as the printhead to hot water, but still the same message. I also downloaded and reloaded the drivers, but to no avail.  The machine is 3.5 years old and so I came to the conclusion, it exceeded its use by date.  The cost of a new print head is $ 70 while the printer, HP Officejet pro 8600, is now manufactured and was replaced by the Officejet pro 8620 which sold $275 by HP.  HP said that because of the age of the printer, there is no guarantee that a new printhead will not solve the problem.  I then bit the bullet and ordered a new printer.

• With print head problems

  The guarantee statement in my manual says that print heads, when the customer replaceable, are warrenteed for up to one year. What I have not been able to determine, if the Photosmart 5510 is such a machine? 5510 customer print heads are replaceable?

  Hi FitnessGeek,

  In general, here's coverage options.

  1. Self-help through searches using HP troubleshooting documents found on the HP site or using the HP Forums, you did.
  2. For many printers, the user can pay phone support to try to help solve the problems.  It does not cover the material.  Because it looks like you have a hardware problem, it probably wouldn't be a good option.
  3. For many printers, upgrade options available there.  These printers can be slightly used certified refurbished HP printers that have the one year warranty.  They will look and act like a new printer.  If you decide to check in this option, be sure and ask the agent on the 1 year warranty for $1.00 for improvements.  So for $1.00, you can have a full warranty on the printer for 24 months from the date of purchase.  For more information contact HP worldwide .

  Let me know if you need more information.

• Cleaning the printer heads?

  I am running Windows 7.  How to clean the printer od my Deskjet 6940 to print heads?

  Sorry, Center of Solution is not available for the 6940 Deskjet under Windows 7.

• Large format HP Officejet 7500 a: print head for my large Format HP Officejet 7500 a

  Hello

  I have a printer of e-all-in-one large Format HP Officejet 7500 a - product E910a No.: C9309A serial no: [personal information deleted]

  I need to replace the print head.

  I found this on HP page http://support.hp.com/us-en/document/c02271166 they said it use the CN643A

  On a support HP cat, what they said use CN642A.

  On another page of HP, they said use CH638A.

  The CN642A is now 5 HP564 ink cartridges, but still the HP web page said that it will work in my HP Officejet 7500 a large format using the HP920 cartridge.

  I found other heads of printing on the web article CD868-30001 model number and on the web page of HP were unable to match the part number for a list of available models.

  Now my big question including the number of pieces to the correct print to my printer head?

  Hello

  I offer my apologies. It should have been if your printer uses 4 ink cartridges, type CN643A

  Please click HERE to access the document to see what print head fits into your printer.

  Check under Solution 4: replace the print head.

  Step 2: Order the print head

  He states:

  If your printer uses 4 ink cartridges, type CN643A

  If your printer uses 5 ink cartridges, type CN642A

  Please ignore my previous post where I suggested CN642A.

• Dell V515W print head problem

  My printer has stopped working.  "I'm getting a ' there is a problem with the printhead" error.  I've cleaned and deep cleaned the print head.  Just before it began, my pages were all blue print.  Now, I can't clean clean/deep/align or anything because of the error.  The print head is not available for purchase from Dell.  The printer is 15 months old.

  My printer for several days would print my empty document.  First printing color stops working then stopped printing black. I followed all the instructions of the printer, and nothing happens.  On my screen of the printer, it keep saying: "does not." Insert a new print head.  I call dell (1-800-624-9897) and had them take over my computer to solve the problem with my printer.  The representative did a job through and found no problem.  They send me another printer in 5 bus. days. The print head is the problem.  Where can I buy new printhead in the future?

• Print head on V715w

  Printing perfect color but not black.

  So I went through the black cleaning and process print head worked but has no color!

  I did it again and now colors work but black does not work!

  I use a paper filter coffee - as suggested by Dell - or J cloth

  Advice please?

  Ian

  Ian,

  Try to read...

  The printer does not recognize the cartridge ink, or only in one colour prints

  Also, try to go in the printer preferences and make sure the box is checked to use all of the available ink.

  

  Rick

• Print head for printer HP6500

  I have problems printing with my HP6500 printer.  We rinsed the printhead before and it worked.  Put us the printhead in water and I bought new ink cartridges and it still does not.  We think that perhaps a new printhead will take care of the problem.  What do you think?  How much is a new printhead for a printer HP6500?

  Hello

  The print head is not available outside HP.

  You can call the HP Technical Support to know the price of the print head.

  Please call the HP Technical Support for assistance.

  If you are to US, toll free # is 1-800-474-6836

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• C309a error message when you try to clean the print heads

  I use an iMac with Mac OS x 10.6.8 computer and I have the HP Photosmart Premium C309A installed wireless.  I have a problem with printing from the desktop to the C309A and his photo tray, that is, the dialogue continues to tell me the size of the paper or print format is not compatible, even if I used this dozens of times before.  Second, the actual printed photo has been terrible, so I chose the option to clean the print heads.  In the process, the error message appears after 20-30 seconds, saying that he could not completed, then contact HP support.  What can I do to fix this problem of double?

  Hello USAFA68,

  I would say that the head of printing/cartridges manually cleaning.

  You can view a guide on how to do this here:
  http://support.HP.com/us-en/document/c01794817

  This article is intended to replace the printhead completely, I want to ignore for now, but the cleaning steps are available and can help solve this problem for you.

• Stuck "waiting for the printer to be available."

  After initially looking at it's going to print, the printer dialog box displays "waiting for printer to be available" and it's there (even if the printer - inkjet HP series C3800 - is ready).

  Here is what I tried:

  Using the HP utility software on the same computer, I am able to successfully print a test page, which rules out a problem with the printer and its connection to the computer.

  Printing worked normally before moving on to the Sierra. I tried resetting the printing system and add new printer (Sierra recognizes very well). I also tried to run in case disk utility have a permissions problem.

  I'm stumped at this point. Help much appreciated.

  Same story, but with a HP Laserjet P3005dn, specific scenario, the exact symptoms, exact attempts to improve...