No reclassification of WRT54G to E3000 no access of local working group
I'm trying to upgrade my WRT54G to the E3000.
1 run the installer and all PCs (XP, Vista, W7), TV, TiVo can access the wired Internet or wireless with no problems.
2. when I try and 'see the workgroup computers' it fails with the "workgroup is not accessible. You may not be authorized, path not found network"(it's the XP error, error Vista is slightly different)
3. all PC's are pings
4. I can access using network drives mapped previously or previously shortcuts other shared files installation PC.
5. anyway I try and see computers on the network, it fails.
Reconnect the WRT54G and everything works again. I tried the installer twice (after reset the router)
I also disabled firewall.
Here's what I did to finally solve the problem. What I read online Linksys is not very useful on this problem that many people have.
First, I replaced my 54G with a 2 54 I had. PC acknowledged that the router was new and replace the network. All PCs were still on the workgroup 'WORKGROUP' and all the actions of PC can be found and were available as before.
Then I reconnected it my E3000 and before PC and actions were not accessible.
Working Group was still "WORKGROUP." Then I changed the Working Group of each PC with a new name, and after the restart, all PC actions are available. No change in the area of trust or any other changes to Norton.
Only change required was to change all the readers of PC and network under a new name of working group.
Clearly a problem with the E3000.
Tags: Linksys Routers
Similar Questions
-
Access to local administration E3000 via HTTPS problem
I usually use a wired connection to the laptop to access the E3000 and http to access to local administration. I decided to simply to change to https and uncheck http. When I did this and use https to try to get web access, Firefox and IE say there is a certificate error and refuses to connect. In Firefox, I even said to use the certificate, but he refuses. I save a configuration file backup before proceeding with this change.
Any ideas on how to enter the web access with security 'mistakes '?
Also, if I have to reset the modem (shudder) completely restore configuration will set all my settings city MAC addresses? Since I also use MAC addresses for more security, I hope than those that are saved in the backup as I have entered him very much. I should re - establish links to all my devices like TVs and smartphones.
Thanks in advance.
No, if you upgrade the firmware do not use a backup saved configuration as it is specific firmware. If you upgrade your router reconfigure it back manually.
-
E3000 - guest access without password
Hello
I just installed a new E3000 wireless router and it works fine.
But I would like to give my guests access Internet without having to enter a password.
I know how to change the - password of comments, but it requires a minimum 4 digits password.
Is there a way to remove it?
Thank you
N ° there is no way that you can remove. The least we can do is to simplify the password such as 1234 or something.
-
VPN access no longer works after upgrade from 10 IOS! Any input to fix?
VPN access no longer works after update IOS 10! With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN. Suddenly, he broke Monday after the upgrade to IOS 10. We have experienced many versions of IOS, and it has always worked. Any patch available?
Hello howlindaug,
Thank you for using communities of Apple Support.If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:
Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
Alternatives for PPTP VPN connections
Try one of these other VPN protocols for authentication by user that are safer:
- L2TP/IPSec
- IKEv2/IPSec
- Cisco IPSec
- VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall
Best regards.
-
I want to disable access to the computers of the Working Group, i.e. prevent some users from accessing any thing shared on the network. User type usually computer name in run or any window of the Explorer to access shared data. I want that it should be disabled while a user types IP or name of the computer to access.
Is it possible to prevent certain users and computers to access whats shared on the network?
I use Windows XP on all systems and all computers are connected to the "working group".Although I have not tried, you can try to remove the 'Client for Microsoft Networks' machines you want to access network shares.
Go to the network, control panel right click on your network connection, and then select "Properties".
then select "Client for Microsoft networks" in the login window and uncheck it or click on "Uninstall".
This should remove the access to files via file sharing on other machines from this computer. It also removes access to the printer if you print to a printer attached to another computer via a USB cable. (It should not affect printing to a TCP/IP connected printer). Computers should still be able to use Internet Explorer or access the internet.
HTH,
JW
-
Windows asks for a password when you try to access to the "view work group computers."
We are on a network. Main computer, that we can access through the receptionist connect you and access shared files on this computer. Computer from the receptionist, windows asks for a password when you try to access to the "view work group computers." We tried to use its password. However, the shared files are still not accessible.
Hello
1. what happens when you enter the password?
2. how many computers are connected to this working group?
Refer to this link and check: You cannot access shared files and folders or browse computers in the workgroup with Windows XP
http://support.Microsoft.com/kb/318030
I hope this helps!
-
prospects for bt infinity
I recently changed my home to infinity of BT broadband. Now I can't access my email works through outlook over a VPN. The signin VPN works ok, I can see my network co., but can not use outlook. I get the following error at startup of outlook.
Task 'Microsoft Exchange Server' reported an error (0 x 80040115): ' the connection to the Microsoft Exchange Server is unavailable. Outlook must be online or connected to complete this action. »
Anyone have any ideas?
Allan M
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum.
Ramata Thakur
-
I have a home with 4 PC network - one of them is running Windows 7 Home Premium (with homegroup disabled) and others running XP Pro. The XP machines is called 'Server' and the server and the computer services browser running and set to automatic. Two other computers, called "Notebook" and "Dell", as well as the machine Windows 7 have no file and sharing printers enabled and have specifically the Server service is disabled.
My problem is that one of the two XP client machines cannot access the working group. Let me be clear about this: I open Windows Explorer and click on "My network places"-> "entire network"-> "Microsoft Windows network", there is then a second 5-10 break and then my workgroup name is displayed. When I click on the name of the Working Group, there is another ~ 10 second pause and then I get a message that says error "
is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions. A device attached to the system does not work. ', where is the name of my group to work for other days, after some of the computers are restarted, I find that the XP client has absolutely no problem with that; but the other now has this same problem. In other words, the problem going on between two XP clients. Let's analyze: I have Windows on all PC firewall and any other firewall program. I tried to disable the Windows Firewall and my anti-virus (temporarily), program without effect. This may not be a problem with the way I've set up my actions because the error occurs when I try to click on the task force rather than a shared resource. This cannot be a problem with a specific XP client because at different times, each of the two PCs worked perfectly without any changes of configuration made between the two. It could be a problem with the server settings; but I don't see what it could be. I tried editing
HKLM\System\CurrentControlSet\Services\LanmanServer\Parameters and changing
IRPStackSize from 21 to 45, then 50. I also tried to change the size of 2 to 3. I restarted the server and the client XP and had no effect.
I don't have the same account of user configured on all three machines. However, this cannot be the issue because the problem occurs when I click on the task force, before the server name is still displayed. In addition, each of these two XP clients have connected with their existing user accounts at times.
I tried the Wizzard of configuration network running on all four machines, without effect. I tried a lot of things, most of which I can't remember. I'm at the end of my mind. Help, please.
JW,
Thanks for the continued support.
By the advice of IPCONFIG, I looked at the registry for all computers and found EnableProxy wasn't there. According to the documentation by default to 0, which is what we want. However, I added it to all the computers and left it set to 0 and restarted the computer. The node Type still said 'unknown '.
Thanks for the info on the master browser.
The ""Network location cannot be reached"when you access actions."
the article talks about Windows 2003 Server and none of the symptoms mentioned relate to this situation.The "network adapter advanced troubleshooting for Windows workstations" is on hardware troubleshooting. I think that it's probably not a problem because the computer has no trouble to access the internet, which is not possible if the card network are not working.
I went through the AutoCorrect entry to reset the TCP/IP stack, even if the article describes symptoms such as difficulty to access the internet... And... THIS MARKET!
After re-booting, the PC that was in trouble can now access the working group. All other PCs can always too (have not tried to restart all over again). AWESOME! I can't thank you enough!
I re-post if the syptoms happen; but for now, we can consider this issue RESOLVED.
Thank you 1 million,
Adam
-
original title: HELP!
Trying to file share two computers runing xp but whenever I go to enter the network working group, that it says access denied
-
Every time error message:
\\BOX A\ShareDoc is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command.
I went through the forum after forum and I can not always win.
I tried
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa restrictanonymous. The value data is 0.
- -> Panel-> network connections-> area connection-> properties-> Advanced-> Windows Firewall settings
- Panel->-> LAN-> properties-> Internet Protocol (TCP/IP)-> Advanced-> WINS-> enable NetBios over TCP/IP, network connections
- Network connections-> Wireless connetion-> properties-> install-> protocal-> add-> microsoft tcp/ipversion6 and then add Protocol->-> NWLink IPX/S/NetBIOS compatible transport protocol
- -> Panel-> administrative tools-> local security settings denied access to the computer from the network = remove all users
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 18
We'll call the problem BOX computer and the computer in the network of ZONE B.
Computer configuration:
All firewall disabled, Windows and McAfee on all computers on the network.
All VIRUS Protection disabled on all PCs
BOX A sharing the shared Docs
Sharing Docs user = everyone
Everyone has a FULL ACCESS.
NetBios is enabled.Configuration of the Working Group:
Workgroup = AREA A = ZONE B = MSHOME
I can successfully Ping BOX A go BOX B and vice versa.Measures to control the error:
I have Open View Workgroup Computers and BOX A and BOX B see each other and to themselves.
The BOX can access files of the shared BOX B.
BOX B cannot access the shared files A BOX.
BOX B can access its own files shared over the network.
BOX A cannot NOT ACCESS its own files shared over the network.I try next? Why can't display BOX A there own shared via the network, the documents?
I'm still not win... any suggestions?
Thanks for the tips. I found the problem.
- HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters-> Dword value = IRPPACKETSIZE = 21
I had to climb higher I guess. This fixes the problem described above, but now he has opened a new WIndows 7 PC interfacing program with the Windows XP working group.
I have more reading to do.
-
Hey everyone, I had a question on networks linked to the sharing of files and folders in XP. I have 4 Professional computers on the same network. Desktop of the CEO needs access to a 5th computer connected to the same router/switch, but on a different working group. I want to keep computer Chief Executive Officer, connected to the main network, but also have access to files and folders on the computer of 5th. Is there a way to do this? If yes how can I to do? His small business, but he needs to access certain files and programs on both networks.
If I understand correctly, you want only the head of the it Department to access the 5th computer. If the 5th computer has Windows XP Professional, you can disable simple file sharing. Then, only a user with an account on the computer 5 will be able to access. Ron Lowe and I wrote a web page with all the details: Windows XP Professional file sharing .
-
Windows XP access denied to the computer working group
I have a home network with a PC running any Win XP SP3. PC my wife can see and access my PC through the working group. However, my pc cannot 'see' his, whenever I click the icon from the PC, I get the message "\\Ns... is not accessible. You might not have permission to use this resourse. Contact your network administrator to find out if you have access permissions. »
Conditions known to the TWO PCs:
Same workgroup
File and Printer Sharing is on
NetBios is enabled
Computer browser is started
Both PCs have updated files to share with users able to change files on the network.
Help this has been driving me crazy
No doubt Section c below or misconfigured or double firewall.
Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.
A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the Windows Firewall. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.
(B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.
C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:
XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm
D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).
E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder.
F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.
MS - MVP - Elephant Boy computers - don't panic!
-
How to access the "Local Settings" folder in Vista.
Have an Adware bug stuck to the folder "Temporay Internet" McAfee can't remove it completely. In XP, you could access the local settings folder to manually delete the Temp and Temporary Internet files. I liked to do this because you have been assured that all deleted. But in Vista, all I get is access denied! And this applies to other as well protected system files. Is there a way to change the security settings for this folder?
Local Settings is a junction point : a hidden and protected operating system file that is not accessible to the user. He points to the folder accessible by the user
C:\Users\\AppData\Local
Have you tried to delete temporary Internet files in Internet Explorer? Click Tools > Internet Options > delete .
Boulder computer Maven
Most Microsoft Valuable Professional -
Change sharing permissions, now I can't access the local disk
Hello all, I have two computers, both running windows 7 (one is 64-bit and the other is 32-bit) connected via LAN and WiFi. One of them has all of the local disk shared with full compensation for everyone (full control). I decided to remove these permissions and control to "deny". Then I had to cancel the task and decided to resume later. HURT, now I've lost access to this drive, even though I can access some files. When I try to enter in the drive, an error message appears saying "C: is not accessible. Access is denied. I did some research and it seems to be a common problem, but I followed all the steps did not work. It shows as 0 bytes and security options does not show anything, but "you don't have permission to view or change the permissions of the object settings. I tried to adapt, even in safe mode and as administrator, do not to prevail. It keeps saying 'access denied' I also tried to set a hidden administrator account, but the account manager is 'not available for my system' when I made these unfortunate changes, it was not this computer but on the other, I think it might be the reason. Now, I can not access my local disk or change anything. Please, help me, I can't find a solution to this mess!
Thank youHello
I suggest you to follow the steps in the link given below and check if it helps.
How to open a file if I get an access denied message?
http://Windows.Microsoft.com/en-CA/Windows7/how-do-i-open-a-file-if-i-get-an-access-denied-message
Let us know the status of the issue.
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
Maybe you are looking for
-
I am running windows xp sp2 and I put my site to dowload under (Tools/options), but when I select an MP3 file to download, firefox does NOT copy the file to my location of choice on my HD - instead, it opens a new window with a 'player' of fortune an
-
HP envy 4500 problems scanning - used to work, now, not so much
I tried to solve this problem for over 3 hours now so apologies if shows my frustration. Equipment: MacBook pro under OS X 10.9.2 Apple airport express router HP Envy 4500 all in one printer/scanner I can print without problem. Using the HP Scan appl
-
I need to reinstal the HP Solution Center software on my PC and the office.
I am running Windows Vista for a HP Phtosmart Premium All in One C309a. I deleted the application before a reinstall but this app (used to operate the printer) did not return. Everything works fine now, but I can't give orders to my printer/scanner.
-
Monitor goes to sleep too quickly
My screen goes to sleep very quickly after a few seconds of not to use the computer. How to extend the time? I don't know which one to choose the topic.
-
Dell Caddy tray part number: N6747 can be used with the hard disk Power Edge 840 cage.
I have the hard drive Dell 840 cage and want to buy some caddy tray. I do not know caddy number part of the plateau of the N6747 can be support for Cage Rack on Power Edge 840. Thank you.