No recovery snapshots have been created

Similar Questions

• Can I reorder the accounts once they have been created?

  I have created a number of accounts of e-mail, but unfortunately most important were created last. I would like to move this account to the top of the list, but I don't see any way to rearrange the display account once the accounts have been created.

  Is it possible to rearrange accounts once they have been created?

  Thank you

  Install this add on.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/manually-sort-folders/?src=SS

• Many of my sites have been created with Adobe Flash CS6 installed on my computer. I don't have a creative cloud.

  I'm a web designer. Many of my sites have been created with Adobe Flash CS6 installed on my computer. I don't have a creative cloud. It cannot consider sites that are up to now on mobile phones and tablets that will not allow the flash. Is this new version allows flash to mobile phones and tablets? What should I pay for an upgrade?

  The thing that disables the use of Flash on mobile phones and tablets is the cell phone or the tablet itself - they not only without any support for Flash.  You will need to pursue alternative implementations such as javascript/css/html5 use to overcome the problems of mobile/tablet.

• How can I add questions to the question pool, after the questions have been created.

  I created issues in captivate, but did not create the through the pool of question Manager. I want to make in a pool of question now. How can I create a pool after the issues have already been created?

  Go to Windows > Question pool to activate the tab that displays all your Question Pools.  On the Filmstrip, do a right click on a question slide (or a group of slides) and choose the context menu option to move them into a pool.

• How to synchronize 2 digital output channels that have been created with DAQmxCreateCOPulseChanFreq

  Hello

  I use peripheral USB6221.

  I created two digital output, operating on a frequency of 75KHz and duty cycle of 50%. But I need a period of 1 microsecond between the two channels.

  I have craeted the two channel on the same task and guess if I use a delay of 0, the channels will be synchronized, but looking at the scope, the channels are not synchronized. Here's the code I used (I checked also all return codes of coarse and fine).

  Thank you

  Danny.

  Int32 RetCode;

  RetCode = DAQmxCreateTask ("", & m_OCtaskHandle);
  LogMessage (RetCode, "CreateTask", "");
  If (RetCode > = 0)
  {
  define the first output channel for 1 transmitter (75KHz)
  RetCode = DAQmxCreateCOPulseChanFreq (m_OCtaskHandle, "/ Dev1/ctr0", ")
  "Transmit1 Line 1", / * name to assign to the channel * /.
  DAQmx_Val_Hz, DAQmx_Val_High,
  0.0, / * initial delay in seconds * /.
  75000.0, / * Freq * /.
  0.5 / * market factor * /);
  define the second output channel for 1 transmitter (75KHz with 1 microsecond delay)
  RetCode = DAQmxCreateCOPulseChanFreq (m_OCtaskHandle, "/ Dev1/ctr1", ")
  "Line2 Transmitt1", / * name to assign to the channel * /.
  DAQmx_Val_Hz, DAQmx_Val_High,
  0,000001, / * initial delay * /.
  75000.0, / * Freq * /.
  0.5 / * market factor * /);
   
  Describe all channels continuous task
  RetCode = DAQmxCfgImplicitTiming (m_OCtaskHandle, DAQmx_Val_ContSamps, 1000 / * I think that NA since continuous * /);

  RetCode = DAQmxStartTask (m_OCtaskHandle);

  Hello Danny,

  If you are looking for more output channels of the Digital pulse trains, you can create 1 task of counter that is used as the clock for digital multi-line data output. For this digital task, you will need to make the clock source line PFI for the output of your task of counter. Once this has been done, you will need to create the digital signal for each line of output and write to the card. The example called write dig Chan - Ext Clk will explain how to set up the digital task so that the task has an external clock (the counter). I hope this information helps you and if you have any other questions, feel free to post.

• recovery rates have been deleted - help!

  My father inlaw was recently scammed by someone claiming to be from microsoft, out to deprive him of £300, they also with remote access to his computer and seriously messed. I was about to restore it to factory settings only to discover that the D drive, where the recovery disc was stored has been removed.  Please can someone help me get this computer working again, I bought the recovery software which did absolutely nothing, it is not possible to restore the system and I am at a loss.

  Help, please

  Monday, December 17, 2012 07:42:43 + 0000, GillieWallace wrote:

  My father inlaw was recently scammed by someone claiming to be from microsoft, out to deprive him of £300, they also with remote access to his computer and seriously messed. I was about to restore it to factory settings only to discover that the D drive, where the recovery disc was stored has been removed.  Please can someone help me get this computer working again, I bought the recovery software which did absolutely nothing, it is not possible to restore the system and I am at a loss.

  Contact the computer manufacturer and ask them for help. They should
  being able to provide a DVD at a low cost.

  Ken Blake, Microsoft MVP

• With the help of Adobe CC on two workstations... LR suddenly tell me that my catalogues have been created by a newer version?

  I have Adobe CC on both my desktop (a Mac desktop computer and a laptop Mac)... they work on the same subscription to Adobe.

  When I export a Lightroom Catalog out of my laptop and then try and import it on my desk, he said "the catalog was created by a newer version of Lightroom.

  ... I'm if confused, aren't the same version?  Everything is updated and I have never had this problem before... someone help me please!

  Hello

  I suggest you to please check the version of Lightroom on both computers.

  Please open Lightroom, and then in the upper left corner, click on Lightroom, it should be the same for both computers.

  Please let us know if it helps.

  Kind regards

  Tanuj

• tables have been created in the sys account

  Hello
  I've created a few tables in the sys user in the oracle 11g database account. (Told me, if I am against the creation of anything under the sys account).
  Now when the developer (11.1.1.6.0), we call these tables (eg. SYS.tableA), the form will not compile. It is said sys.tableA identified must be reported.
  
  What Miss me? We cannot create a public synonym for these tables (not allowed by company policy)
  
  Thank you
  Laba

  Hello

  To see the paintings in other users, you must have administrative privileges. The owner gives privileges to other users with the GRANT command.
  But the most important is not that but what follows.

  Never, never, NEVER create any object in the SYS/SYSTEM schema.

  François

• Fake MP3 files have been created after the HDV capture

  Hello

  Capture from Canon XH - A1 works very well.

  Only the created files have the extension *. MP3

  When you later change this extension to *.mpeg, it works correctly.

  Question:

  How to capture in *.mpeg directly? And not only AK fake mp3?

  Thanks in advance

  PR (Netherlands)

  I had the same problem with CS6.

  I found that, after the capture in MP3 format just rename the m2t file extension and the file worked perfectly with audio and video. It's a pain... but it works.

• Once a snapshot has been created?

  Hi all

  I'm looking for a command that can tell me when a snapshot was created.

  Can someone help me?

  Olivier

  You get property created

  Get-Snapshot - VM (Get-VM-name "VMName") - name 'Nom_snapshot ' | Select name, created

  or

  $CreateTime = (get-Snapshot - VM (Get-VM-name "VMName") - name "Nom_snapshot"). Created

  Josh Atwell

  http://day2dayadmin.blogspot.com

• Can you open/edit indesign CS3 files that have been created with CS5?

  I recently purchased indesign CS5 and use that for my internship. However, my boss is still using CS3 and said that she could not open or edit the indesign file that I sent him.  I looked to see if there was an option in 'export' and have not found anything.  I use a mac and I think she uses a P.C., too, when I finally sent him the file, I was still with my free trial - all this make a difference?  Help, please!

  What has been covered time without end, but anyway, I'll do it again!

  You must export a CS5 idml file, and then open the idml in CS4, export a file inx there then that open in CS3 and save it as an indd.  Sorry but there is no way round, presence, end of history etc etc.  If she's using CS3 and you use CS5 there are no roads between them unless you have CS4, and even in this case the road is littered with pitfalls!  Look at here for a pretty long discussion / sometimes write on the subject.

  Ultimately it will have to be upgraded, or you could see if you could buy a CS3 or version 4 but it is very difficult to get a legitimate copy, the only way is to buy it off someone you know and most of the people do not sell because they upgrade.

  Best new last, there is a solution in the short term to this guys blog and you can download a trial version of CS4 that will last for a month.

• No shortcuts have been created after the installation of XP mode

  After you install the Virtual PC RC and XP Mode RC, it said installation is completed successfully, but it created no shortcuts anywhere on the machine for me to run in XP mode.  I tried to uninstall and reinstall and rebooted the machine after each time and still nothing.  There is a Windows XP Mode folder on drive C, but there is no program in this folder to run, just file key.txt, vxpeula.txt and Windows XP Mode base.vhd tutorial.

  Start the Virtual PC Windows XP Mode and install a program.  The program will appear on Windows 7 in Start > all programs > Windows Virtual PC > Windows XP Mode Applications and you can create a shortcut on the desktop to him if you wish.

• Just upgraded to 10.0.2 and now he can't findwebsites - three that I know have been created with WordPress. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank yo

  I get the following error message: gone the requested resource / is no longer available on this server and there is no forwarding address. Remove all references to this resource. Additionally, a 500 Internal Server Error error was encountered while trying to use an ErrorDocument directive to manage demand. IE & Chrome work very well - and the previous version of Firefox (10.0.1) also worked. Looking for a fix or I need to give up Firefox. Thank you.

  Found the problem - it's a HT Access file on the site itself. Deleted the file and 10.0.2 works very well.

• I try to read the pdf files that have been sent by email to me. They include the genealogy tables, but are too blurry for me to read. How can I fix them?

  I use Adobe Acrobat Pro DC, but I feel that these files have been created on a much older Abobe program. Thanks for any help you may be able to provide.

  Oh, let me see if I can include a screenshot of my problem.

  

  PDF files don't deteriorate on their own (unlike JPEG files, for example). If they were clearly before and now no are not then something changed in the display settings to make (under Edit - Preferences - Page Display), or they have been published by someone.

• Statement on the date of a virtual machine has been created

  Is it possible to report on the date on which a virtual machine was created?  This info is stored anywhere with the virtual machine?  Otherwise, he'll find newspapers in VMware Server to say how many virtual machines have been created last year?

  Thank you

  The Get-VIEvent cmdlet gets its information from the database of vCenter. To be more precise in the VPX_EVENT table. You can only return in time with respect to the first record in this table. To retrieve this date, you can use the following code:

  $eventMgr = Get-View EventManager
  $filter = New-Object VMware.Vim.EventFilterSpec
  $eventCollector = Get-View ($eventMgr.CreateCollectorForEvents($filter))
  $eventCollector.RewindCollector | Out-Null
  $eventCollection = $eventCollector.ReadNextEvents(1)
  $eventCollection[0].createdTime
  $eventCollector.DestroyCollector()
  

  The downside to the use of the Get-VIEvent cmdlet is that you must specify the number of records to be returned (100 by default) with the - MaxSamples parameter, and all these records are retrieved from the database. If you find events and you don't have a period, you must provide enough samples to include yours, and it can last forever. The event table can grow very large. In my environment, there are 8 million + records in this table.

  For the search of the database of events, I prefer to use the SDK instead of the Get-VIEvent cmdlet. That way I can start research until my records are found, and I can use specific filters to retrieve only the records that are of interest. I also pick up only as many records of the database if necessary. You can search the crΘation from a virtual computer by using the code below:

  $vm = Get-VM "myVM"
  
  $eventNumber = 100
  $eventMgr = Get-View EventManager
  
  $filter = New-Object VMware.Vim.EventFilterSpec
  $filter.Entity = New-Object VMware.Vim.EventFilterSpecByEntity
  $filter.Entity.Entity = $vm.ExtensionData.MoRef
  $filter.EventTypeId = "vim.event.VmCreatedEvent","vim.event.VmClonedEvent","vim.event.VmDeployedEvent"
  
  $eventCollector = Get-View ($eventMgr.CreateCollectorForEvents($filter))
  $eventCollector.RewindCollector | Out-Null
  $eventCollection = $eventCollector.ReadNextEvents($eventNumber)
  $matches=@()
  While ($eventCollection) {
    $matches += $eventCollection
    $eventCollection = $eventCollector.ReadNextEvents($eventNumber)
  }
  $eventCollector.DestroyCollector()
  $matches
  

  See you soon,.

  Arnim