No safe mode - Vista

Similar Questions

• Activate your Webcam in Mode safe mode Vista

  I know that safe mode is very limited and specific uses and I know there are a lot of things you are not supposed to be able to do in safe mode. I also know that there is a workaround or a backdoor for almost everything.

  I was able to find a workaround for my laptop audio, I shouldn't have to be able to activate. Now I'm looking for a way activate my webcam in safe mode. At present, it seems that I have to re - download and re-install my webcam drivers.
  Does anyone know how to enable/activate a webcam in Vista safe mode? And anyone know where I can find free downloads for HP Pavilion Webcam drivers?
  Thank you for your help.

  Safe mode is not a good place to use PC for general use, it is better to resolve error on blue screen. Blue screen error could be due to several reasons, including the hardware and software. I you suggest to contact HP support and then describe the problem, they might guide you to troubleshoot it. Since you said it shows the blue screen after booting, I suggest in safemode kind run MSCONFIG and then you will see the Startup tab and see what is starting up, you can disable some startup and see if the problem is resolved, if yes, there is a problem with a boot service you may uninstall it.

• Stuck in Safe Mode - Vista - viruses? Driver problem? Help, please

  I'm operating Vista Home Premium and only the system starts in Mode safe.  Several vertical lines in a model of 5 show on the screen as it tries to start. He is stuck in a loop of repair of unsuccessul attempts but I can't us F8 to go into Safe Mode, no problem.

  Normal system repair did not work. System Restore to a watch in which the system was working did not work (went back 2 weeks).  I thought it might be a video driver error, but new updates of drivers did not fix the problem still could be the problem?  It will not Norton scan (although my anti virus has expired four days before what is happening). I uncheck all startup items and confirmed that in Normal Mode with the system configuration. None of this has worked.

  I bought an external hard drive to transfer all my data on that I agree with setting back to factory settings, but it will not recognize the new external drive in safe mode.   -Why is this?

  Any help on these two issues would be much appreciated!  Pulling the last hair on my head!

  Hi ColtsBlue,

  ·         Did you of recent changes on the computer that could have caused this start happening?

  ·         Are you able to scan the machine with something other than Norton?

  I suggest you try the methods below and check if it helps.

  Method 1: If you have the disks for Windows Vista try a startup repair and verification.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  Method 2: This can happen if the video card drivers do not work or is corrupted so uninstalling and reinstalling might solve the problem several times so try uninstall the drivers from Device Manager. Follow the steps below:

  1. Click Start, in the search box type Device Manager and press to enter.

  2. Device Manager window opens, expand sound, video and game controllers.

  3. double click and go to the tab drivers.

  4. click on the tab to uninstall to uninstall.

  5 restart the system, it will reinstall the drivers again.

  Method 3: You can uninstall Norton and install Microsoft Security Essentials of Microsoft and check if it works very well.

  http://www.Microsoft.com/security/PC-security/MSE.aspx

• Internet refused after safe mode Vista-access

  For some unknown reason, my Vista system when I turned it on went safe mode of ti, I finally return to the window icon windows but could not sign on the internet, just kept circling, blue invivoked even a non-secure wireless signal still turn? -This is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:don't forget

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        You are able to use Internet Explorer in normal mode?

  In safe mode, only the basic drivers and features are loaded so surfing the Internet does not work in SafeMode instead you can try in safe mode with networking that allows you to boot into safe mode and offers also the possibility to browse the Internet.

  To start in safe mode with network follow the same procedure that you follow to start in safe mode (button press F8 to start the system and boot advanced option to the list of Advanced Options Select Mode safe mode with networking.)

  You can also visit the link provided below for more information about advanced startup options.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Change the resolution of normal-vista through Safe mode-vista

  Hello!

  I installed a demo version of this game of strategy, 'Starcraft 2 '. After installation, I try to play. However, without warning the game changes permanently my screen resolution to a value that is compatible with my monitor (says my Samsung TV/Pc monitor ~ "cannot display resolution")

  Even after restarting Vista, remains the problem of resolution. Still no display.

  Vista safe mode, but displays in another resolution and works very well (I am writing this message in SafeMode). Now, I can change the resolution here, but whatever the changes I make do not transfer to normal-Vista mode.

  If anyone, please tell me, How to change the display resolution of the normal mode, safe mode? Alternatively, how can I change the resolution, 'the eyes bandaged?

  I uninstalled and will avoid the game.

  I also tried the system restore, twice in fact, just to be sure. Picked dates from before I even heard of the release of the demo, but it still does not work. The display resolution is still off enough to leave my empty screen.

  Try the following, but do it in Safe Mode so that you can see everything on the screen...

  1. set DPI:
  Right-click on a free space of the desktop > customize > column to the left, adjust the size of police (in PPP) > uac prompt > click default scale (96 DPI).

  2. resolution:
  Right-click on a free space of the desktop > Personalize > Display Setings > move the slider to the right or left whatever the case may be. Check your user manual, see if she tells you what resolution is for your computer. My laptop is using 1280 x 800 pixels.

  Here is a table of the guide line:

  Monitor 15 inch	1024 × 768
  17 to 19 inch monitor	1280 × 1024
  monitor 20 inch and liked	1600 × 1200

  
  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• cannot start computer in safe mode vista

  Laptop was working fine when I went to bed, got up the next morning, you press Ctrl + Alt + Delete and computer is stuck on the welcome.  It's been that way.  I can only boot into Safe Mode - Networking.  Ironically, the problem started after Symantec performed an update on March 22, 2012.  Any suggestions

  Looks like you may have a virus or other malware. Get your updated antivirus program and run a full scan of the system.

  -

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  -

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  -

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  -

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  -

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  `

  I hope this helps. Good luck.

• I have windows vista home premium 32 bit service pack 2 (never been able to restart in safe mode)

  I was never able to restart in safe mode, he comes back and automatically restarts and begins normal mode.

  The issue I'm having is that I tried to start my computer on my regular account and also I tried to start it on the built in Administrator account and both directions after I login I get a screen dead (black on the administrator account and purple on ordinary account) and it is just here doing nothing.

  I tried for hours now.  I read on possibly DΘmarrer on chest done but then it is my dilemma it will not load and it has never loaded in SafeMode since day 1.

  Thanks Bill Gates for such a piece of c r a p like windows vista.

  Any ideas on how to solve this problem?

  Thank you!

  PS: don't know if this helps, but this computer is an Acer Aspire 5810TZ-4657

  Hello

  This is how to start safe mode:

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  __________________________________________________

  Startup Repair:

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  To reinstall Vista on an Acer, or use DVDs you do download for startup repair.

  This can help you (download files and make your own DVDs).

  Vista ultimate is available. Read the information in the lower part of the message on how to use it for other editions of Vista:

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You press the left ALT and F10 at startup to start the recovery process to factory settings.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  You can order Acer recovery disks, if they still have.

  How to order the eRecovery discs:

  https://store.Acer.com/store?action=DisplayDataValidationServicePage&locale=en_US&siteid=Acerna

  Also you should have your own recovery discs.

  Read your manual on how to make them through the Acer eRecovery program.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Why my VAIO VGN-FZ31S with Windows 7/Vista will only open in safe mode?

  I've been having a lot of trouble recently and think that it was caused by a virus.  However my Vaio only now starts in safe mode, and I have warnings that firewall is not on, and Microsoft Security databases are not executed.  However, I can't download MSE on the web, because I get an error message telling me that I can't download it because I am in safe mode.  Similarly, I get the same messge when trying to do other operations.  How can I get the computer opens in normal mode?

  Thanks for any help.

  sturrdave

  Hello

  Two suggestions for you.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  THS is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  _____________________________________________

  Here's how you normally get out of fashion without failure:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  See you soon.

• Laptop won't start in safe mode. No sound in SafeMode.

  in my laptop suddenly virus enter so my pc is unable to start as usual so just now I he started as a safe mode and I'm not able to get all the sounds with any video that any body can help me for this problem

  Moved from feedback

  Original title: sound off to play

  Hello

  Audio does not work in Mode without failure.

  And you fail to tell us what is your operating system.

  Follow this information.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Safe mode start when pilots need fixing?

  Is it possible to start Vista in safe mode when the monitor is empty? In safe mode, minimum resolution should appear and make it possible to re - adjust the configuration of the monitor.

  I replaced an old monitor with a new HD one. The new monitor worked to stop down. The mistake I did was disable the old monitor when I found unable to make the new main monitor and a single.

  Is F8 at startup way?

  Hello

  Press F8 at startup at the rate of about once per second.

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• the computer restarts on startup and then only works in safe mode

  I'm running out of options.

  I have a MSI all in one pc which runs on windows vista Basic. I turn on my computer and it will show my lock screen, but just before I can type my password, it restarts itself and give me different options of safe mode. I tried a lot of different solutions, but none of them seem to work. Can anyone help me, please.

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you already know)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Restart normal is weird after safe mode.

  I've used Safe Mode and then when I rebooted normally connect to my account fine, then once on my account that the windows vista doesn't seem to work properly, the taskbar was different from a taskbar in vista and I can not connect to the internet. Also my system reboot is a problem too. Any ideas how to have things back to normal?

  Hello

  See if that helps you.

  Do a system restore, if necessary using the safe, before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  See you soon.

• Uninstall java in safe mode

  When I tried to uninstall Java in Windows safe mode (Vista) the following error message appears: "the windows service install could not be accessed. This ca occuer if windows install is not installed correctly. Contact your support team. I uninstalled programs before. Why this message now?

  When I tried to uninstall Java in Windows safe mode (Vista) the following error message appears: "the windows service install could not be accessed. This ca occuer if windows install is not installed correctly. Contact your support team. I uninstalled programs before. Why this message now?

  ================================
  The following article is maybe worth a visit:

  
  (2642495) error "the Windows Installer Service.
  Not able to access"when you install or update
  programs on Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2642495

  I was wondering... Why Safe Mode?

  The following article might be useful:

  How to uninstall Java on my Windows computer?
  http://www.Java.com/en/download/uninstall.jsp

  Also... the freeware version of Revo Uninstaller can be useful
  a try... it can uninstall almost nothing:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Revo Uninstaller - free and Pro Downloads
  http://www.revouninstaller.com/revo_uninstaller_free_download.html
  (Windows XP, Vista, 7, 8)
  (The free version supports 32-bit operating systems only)
  (The Pro version supports 64-bit and 32-bit operating systems)

  If you prefer not to install Revo Uninstaller on your system...
  There is a download link for a Portable version at the bottom
  downloads screen. Just download it to your desktop,
  Unzip it and open the folder revouninstaller laptop left click
  Revouninstaller.exe to run the program.

  Revo Uninstaller Pro FAQ
  http://www.revouninstaller.com/revo_uninstaller_how_to.html

  How to use Revo Uninstaller
  http://www.4kcc.com/How2/Revo.html

• My computer only starts only Safe Mode

  Yesterday, I had no problem with a normal startup of windows vista Home premium, but late in the evening, it was not react to anything that either, so I turned off my computer by pressing the power button. This morning I wanted to start again, but after the windows loading screen, I got a black screen for a minute or 2, then it is restarted again. the only way I can go into my computer is in safe mode, which works very well. I can't remember where I left my installation CD, because this computer is quite old already (for one computer) what to do?

  Hello

  Here are three methods that you can try to solve your problem

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode (which you are already in)

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu, type in msconfig
  4. Then press enter on your keyboard.
  5. The System Configuration utility opens
  6. Make sure that Start Selection is set for Normal start.
  7. Click the Startup tab.
  8. Make sure you start is not checked
  9. Press the apply button and then press the OK button.
  10. Click the restart button to restart your computer.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If these methods do not fix the problem, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  You can borrow a Microsoft DVD from a friend, if you do not or can not find yours.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• After having upgraded to Firefox 24 it now won't start at all after clicking on the icon. My OS is Windows Vista premium. It will start in safe mode.

  Upgrade to Firefox 24 and now nothing works at all despite uninstall it and reinstall several times and lose all my favorites etc. However, it does not start in safe mode. At first, I thought it was my Norton 360 Security, but after 2 hours in contact with them, I'm still in the same position. When I double click on the Firefox icon I see the moment where the cursor and then it disappears and nothing loads.

  My OS is Windows Vista Premium and I use Windows internet explore for the time.

  HELP Please!

  Thank you nellus91.

  I used the Microsoft Safety Scanner first, and it found nothing. I then used TDSSkiller and he found the problem.

  Problem solved.

  Thank you.