No satellite P300 - 18 M no wireless connection with Win XP Pro

Hello people!

I recently bought a P300 - 18M and installed Windows XP Pro SP3 on it. Everything works fine except the wireless connection. He know the switch for wireless connection is disabled because it is not all networks, although the switch is on and the wireless LED is lit.

I checked the FN + F8 keyboard shortcut, I chose wireless only here...

I downloaded the Intel drivers latest 5400 for the network card, but it is always no network :(

Who can help out me?

Hosts the Netherlands, Leon

Hello

There is also a WLan switch on the side of s for laptop.
This switch must be activated also.

Please check this!

In addition, you can consult the WLan card properties in Device Manager.
There should be an Advanced tab.

There are different parameters, you should check out. For example, you can choose different WiFi standards such as 802.11 A B G, etc.

Tags: Toshiba

Similar Questions

  • Problem with wireless connection with HP 3070 B611

    I have a router with the IP address 192.168.0.1 and printer HP 3070 B611, whose 192.168.223.1 IP address, so the wireless connection with the printer fails.

    How to change IP address of the printer in the 192.168.0.XXX range?

    It seems that you are on a network other than your router. Reset your network settings on your DEFAULT PRINTER. Connect the printer to the router again, make sure it is the same network name.

    You can also unplug your router for 15 seconds and plug back in and then try to re - connect the printer to the router again.

  • problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

    On the Pro iPad, tap settings > general > reset > reset network settings

    You will need to re enter your Wi - Fi password.

    Then try to connect to your Wi - Fi network.

    If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  • How to set the power settings - Satellite Pro A10 with Win XP Pro

    I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
    I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
    The BIOS shows ' version of BIOS ACPI = 1.30.
    Can someone advice how to change the power settings please?
    Thnx.

    Dave

    Hi Dave,.

    You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

    If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

    I hope this helps, let us know how you go

    Weezle

  • new computer with win 7 pro when it is connected to a Flash drive or external hard drive poster, you have currently not authorized to access this folder or location is not available

    There are now 4 computers in front of me.

    Two are laptops 17 inch hp (consumer)

    Two are workstations mobile hp 17 inch (company)

    On the consumer books, I can view the files on my external hard drive 1 to and 1 GB player.

    On the company workstation (mobile), I'm not able to view the files on the hard drive or flash drive.

    I need your help so that I can save files from the internal hard drive of the mobile platform of book z hard disk external.  And I need to be able to reconnect the external drives and readers to the Zbook mobile workstation to transfer files to transfer flash.

    These are the pop ups that appear for each when displaying of readers by opening my computer:

    When left click hard disk drive a pop up appears with the title bar: location is not available.

    H:\ is not accessible.

    Access is denied.

    Make a right click on the hard drive allows FreeAgent GoFlex drive opening (h :)) properties)

    The tabs are ReadyBoost, previous Versions, Quota, customize, general, tools, hardware, sharing, security

    By clicking on security of advances and then permissions then continue and then change my name owner or administrator... both methods result in the same access denied result once again.

    I came across this http://technet.microsoft.com/en-us/library/00d04415-2b2f-422c-b70e-b18ff918c281 is this something I need to study and learn before I am able to connect and use an external drive or flash?  Or is there another problem?  If the answer is in this link, do I have to put emphasis on and why wasn't windows 7 configured so that it is easy to use external drives as in win xp and win 8?  Are all usb ports do not or all drivers of failing or is it a software problem all?

    I was not able by trial and error to display all files on any hard drive or external flash on the two books of z of mobile workstation.

    Then I went to the flash drive.

    Left click on the flash drive produces a pop-up with title bar G:\

    You don't have permission to access this folder.

    Click on continue to get permanent access to this folder.

    After clicking on continue it opens another pop-up with title bar G:\

    You have been denied permission to access this folder.

    To access this folder, you will need to use the Security tab.

    When clicking on the Security tab he opens a new pop with the title bar: removable disk (g) properties

    The tabs are general, tools, hardware, sharing, ReadyBoost, customize

    He did not indicate what to do next.

    Summary:

    Two new computers hp zbook stations mobile work with win 7 pro

    Or computers with their multiple ports usb allows to access my external hard drive or flash drive.

    The external hard disk and flash dirve each work very well with the consumer portable computers hp with winning 8 and 8.1 of win and have worked with computers with win xp.

    How can I get the Replicator hp z book with win 7 pro for usb drives work with external hard drives or external flash drives?

    I have so far done the following:

    (1) run administrative guest with sfc/scannow and it found no violations of integrity

    (2) ran microsoft fixit will be all available Parameters which automatically checked and corrected each book workstation z mobile http://support.microsoft.com/mats/windows_file_and_folder_diag/

    (3) contacted HP support

    (4) checked for malware using microsoft security essentials, malwarebytes and spybot on each mobile workstation

    (5) updated drivers using HP support assistant on each computer

    (6) windows update the device HP support assistant on each computer

    How do two new computers with win 7 pro can be connected to external drives that allow to view the files as they do with win xp and win 8 automatically?

    How can I access my files on the external hard disk and flash the mobile workstation book z?

    The specifications for the mobile workstation of zbook are:

    Operating system: Windows 7 Professional 64-bit Service Pack 1

    Microprocessor: Intel core i7-4800MQ CPU @ 2.7 GHz

    Moemory system: 16 GB of memory on 2 1600 MHz dimm

    Graphics device 1: Nvidia Quadro K3100M

    Graphics device 2: Intel HD 4600 graphics card

    Hard drive 1: SCSI Disk Device

    C: 683.42 (613,62 free go-go)

    D: 12.21 GB (1,3 GB free)

    E: 1.99 GB (1.97 GB free)

    The hard drive is a seagate 1 TB drive that works very well

    The flash drive is a 1 GB drive which works very well

    This problem has been resolved.

    Right-click all methods have not access external external hard drives and flash drives.

    Sharing, permissions, ownership, administrative changes, all method all failed.

    This problem has been resolved by higher HP product support.  Other levels of support were not able to diagnose the problem or fix.

    The problem has been resolved by:

    (1) determine that he was not a NTFS problem

    (2) using the msconfig to isolate a single service

    When the unique service has been disabled the files on any external drives have been available.

    The service of the problem was the HP Client Security.

    This HP Client Security in its default value is set to deny access.

    Then right-click on the drive and change the permissions, ownership, to administrators, using everyone etc. will fail because they are all trumped by the HP Client Security that is set by default to deny access.

    When that client security is changed the drives become available.  It is not information about this when using the computer and this can be learned by trial and error.

    I hope this helps all those who have z book 17 mobile workstations or HP computers that are equipped with client security.

  • Satellite P300 PSPCCE: Atheros AR9281 wireless network adapter are not all networks

    I have a Satellite P300 PSPCCE with Atheros AR9281 wireless network.

    After a clean install of Windows 7, I can't see wireless networks, unless I connect an Ethernet cable to my wired network card.

    As soon as I take the cable on wireless networks disappear. This computer had Vista and it worked fine there. I tried latest drivers available from Toshiba, but that makes no difference.

    I have tried disabling the wireless and turn market as well with the FN and F8 key and switch on the front. I also tried to uninstall. But it's always the same.

    If someone has had this problem and is there a solution to this?

    Bjarni cordially

    Hi mate

    To be honest I never did experience even with a WiFi card and I have no idea why the LAN cable affects WLan card functionality, it makes no sense to me!

    First, I recommend that you check the settings of the router and reset if necessary
    In addition, you should go to the s for laptop BIOS settings and set its default value.
    Check the version of the BIOS if newest is available, then an update would be worth a try

    You use the Atheros Wlan configuration tool?
    If this is not the case, try this out!
    It s a configuration tool that could be used instead of owning windows wlan settings

  • Satellite P300 - output HDMI does not connect to the model of TV Samsung LE32B450

    When I use the Toshiba "HDMI" out utility to connect my Satellite P300 - 19K to my Samsung LE35B450 TV, I get the message "it is only effective when the PC is connected to a TV set that supports HDMI control via the HDMI cable.

    Does anyone have a solution for this? My Samsung TV is newer and has 3 HDMI input jacks and the same result. Is there another driver from Toshiba not requiring this vibration control function? This seems hardly reasonable given that all I want to do is display & there is normally no 2 communication channels via a HDMI cable anyway.

    Thanks in advance for any help there.

    I m not 100% sure, but I think that in s manuals is described clearly that this tool is designed for use with Toshiba Regza TV. With other words, it is Toshiba specific function.

    If you want to have the photo on your standard procedure for TV use for this purpose connect the laptop to your TV using a HDMI cable, turn on the port HDMI (HDMI channel) on the TV and use the combination of keys FN + F5 to switch between laptop and TV.

  • Satellite P300-23F-mini-PCI Wireless card Replace?

    Question: would it be possible to replace the card of wireless mini-PCI Intel 5100AGN with version 4965AGN or 5300AGN?

    The thing is, recently I bought the Satellite P300-23F. Great laptop. Apart from one thing. I use the Intel 5100AGN wireless. Type of damage, the rest of the components used to build this laptop are high-end. I would have liked to see the 5300AGN of even the old 4965AGN adapter instead. These are both a bit more expensive, but still on the market for the price difference is a simple slice of $20. The 5100AGN TX is only 150 Mbit, which is half as fast as the two other Intel wireless modules. In general, a lot of people seem to have problems with the 5100AGN, seems to be a troublesome product altogether.

    Performance of the real world of the 5100AGN on a Linksys WRT54G is around 15 Mbps (1, 8 MB/s). My other computer laptop, equipped with a 4965AGN will be double that in the same circumstances. Tried all the drivers I could find, but the above values are the best I can get.

    Hello

    I think that this should be possible, but you must use Mini-PCI cards.
    The antenna WLan that is placed behind the screen provides two sons; black & white.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    Greetings

  • Problem with wireless connection with Satellite U500

    Hello
    Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

    I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    Could you please help. I have sky broadband and am currently connected via the ethernet cable.

    Thank you
    Fauzan

    For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

  • Satellite P300-1AD often disconnects wireless

    Hi, I read the threads on this topic and have to admit I have the same problem. I've updated by the BIOS, and I use the most recent driver of Toshiba WLAN support. F.w.i.w. I use a bluetooth mouse. I checked the settings WiFi and Wireless N is activated.

    When I connect with the wireless G (disable N) disconnects without the work of reliable connection for several hours.

    When I turn on Wireless-N, the connection seems to be on Wireless N (I get a speed of 70-80 Kbps connection) but it only holods for so many seconds or minutes.

    Is there something special I need to set in the wireless options to make sure that it works more reliably?

    My AP, a whole new Fritzbox 7270, is only 5 meters (15 feet) away from my position and my status shows the maximum signal strength when I use the wireless G.

    What setting should I change / check in order to improve the quality of the connection Wireless N?

    Have you tried to update the firmware of your Fritzbox?
    Visit the site of the factory for an update.

    What operating system do you use? In Vista, you should disable power save WLAN. This document could be useful for you:
    http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  • I have a toshiba satellite A15-S 127 my wireless connection or the light does not come on when I try to connect

    even when I turn on my wi - fi I get no light, so when I search a connection it dosent show any wireless connection, how can I know if I have even a wireless card?

    Hello

    1. were you able to connect to the internet wireless with no problems before?

    2 have you made changes on the computer before this problem?

    Check the status of the NIC in Device Manager and send back the same.

    The following articles may be useful:

    How to troubleshoot possible causes of Internet connection problems in Windows XP

    http://support.Microsoft.com/kb/314095

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  • Problems of sudden wireless connectivity with Qosmio G10

    I had a Qosmio G10 for almost 3 years now, and at least WRT my wireless connection, everything was fine until a few weeks ago.

    Little by little I started to lose the ability to connect to a WLAN after getting out of the mode standby (Win XP MCE): the computer wouldn't connect to my WIFI and would keep erratic jumps among the various wireless networks available in the neighborhood, without connect because they are all fixed.

    Initially, the problem could be solved by restarting the computer and the router.

    Now even that no longer works. I see either all local wireless networks, including mine, without being able to connect, or I see no WLAN at all.

    Windows status bar icons both ConfigFree show the small red cross and the system didn't budge. When I see available wireless networks, I'm trying to connect to my own, but then the computer attempts to connect forever. If I order for Toshiba ConfigFree * _For unchecking the checkbox in the properties window_ wireless * and I'm trying to connect manually my WLAN to the computer by dragging a link the said application to another provider program is in control.

    I have tried everything that came to my mind, the repair connection, enable/disable WZC, install new drivers for the Intel 2200BG, install the new version of ConfigFree... There is obviously some kind of conflict, but I do not understand what it can be.

    I don't know what else to do before decide to reinstall new Windows (oh dear oh dear). Moreover, my ADSL Modem/Router is always the same. The link has been dealt with by WPA/TKIP. Everything works fine with the other 2 computers and a phone with WiFi.

    Said by the way and quite surprisingly, a member of the family in another country began just having exactly the same problem on a Toshiba Satellite A110. In this case, the cause may be associated with the change of a Philips to a Linksys modem/router (either DHCP;) WPA/TKIP unchanged; everything works with another laptop in the same household)

    Can someone please help?

    Why use the CnfigFree tool to connect to the WLan?
    According to your message, you are using the Intel card.
    I would recommend so either use the Intel ProSet WLan client configuration tool or the clean option of Windows!

    > try to manually connect my WLAN to the computer by dragging a link the said application to another provider program is in control
    I assume that this error message is displayed because the ConfigFree is always chosen as tool to configure the WiFi network.

    However, the new installation of the OS may not be bad idea due to the fact that everything would be set up again.

  • Satellite P300 PSPC4A - BIOS no updates required for Win 7?

    I have a Satellite P300 (PSPC4A-03P01P)
    Currently 2 hard drives, both are partitioned.
    Disc 1 - C and D
    Disc 2 - F and G
    Current operating system on the C drive is OEM Vista 32-bit HP
    BIOS version is V4.20. 05/01/09

    I want to upgrade the Win - 7 HP 64-bit operating system
    I know that this will require a format the C partition.

    In preparation, I downloaded all the drivers for Win 7 64 bit

    My Questions:

    The BIOS will require the update to support 64-bit?

    If partitions D, F and G are left intact, Win-7 64-bit on the C drive will be able to read?
    Or these partitions will also require formatting?

    Thanks for any help

    Hello

    There is no relationship between the BIOS and the operating system. Thus, you need not upgrade Bios for Win 64 bit.

    > If partitions D, F and G are left intact, Win-7 64-bit on the C drive will be able to read?
    > Or those partitions will also require formatting?

    You can install the Os on C: and it will be able to read information on other partitions too.

  • Made by Satellite P300 - 18 M is fully compatible with Linux Ubuntu

    Hello world
    IM planing to buy a laptop Toshiba Satellite P300 - 18M, and I need to install a Linux on it for my school. IM thinking distribution ubuntu
    and my questions are... this model is fully compatible with Linux? and if so which?

    Thank you to everyone

    The laptop is compatible with Linux, but the fact is that you will not find Linux drivers on the page of the Toshiba driver at the moment.
    Maybe in the future but we will see

    So, you have to collect the 3 sites of third party Linux drivers

    See you soon

  • Wireless connection with my Equium L20

    Hello

    I recently bought an equium L20.

    I didn't know he had wirless, I use wanadoo wireless and talk and currently plugin a wireless adapter for access internet.
    When I put on the L20 it has detected my wireless connection but I can't connect to internet because it rpet aqquiring network address, but nothing more.
    I have to buy a card or something?
    Sorry to be thick but it's all new to me...

    Hello Nicola

    Please visit this page on http://www.windowsnetworking.com/j_helmig/wlan.htm WLAN. Very simply, it is described how you configure your WLAN network.

    Your device has a wireless card and you do not need to buy something.

    Good luck and if you have more questions please write again.

Maybe you are looking for

  • Cannot connect facebook in firefox only

    Hellofacebook displays only those words on a white background:Facebook0 queries0 postsSend a new messageAnother InboxSee the most It works fine in IE. I tried suggested troubleshooting - clear all history and allow cookies... Help, please! Thank you

  • Which Audio files can be saved as a ringtone?

    I come myself sent a ringtone, but cannot find the option to save it as a ringtone, just to play or save it as a sound. I looked at other audio files in my Inbox and I saw that some of them did not "Save as ringtone" and "Set as ILA." Is this because

  • Switch to MSN Skype again

    Original title: desktop Hello I recently tried Outlook here, because I have problems with the MSN transition to this new thing of Skype. I looked everywhere, Outlook would have a gadget of the bureau, as well as a few others that I have on my desk. I

  • Cannot turn on wifi

    Hi, my hp envy is having this problem quite frequently. Sometimes, the wifi adapter will stop suddenly and I can't remember my wireless connection. When I check in the Device Manager, it says that my ralink RT3290 802.11bgn Microsoft Wi - Fi Direct v

  • Error loading C:\Program File\windows Live Photo Gallery\WLX photo Viewer.dll

    Whenever I click on a photo to open the above error apears.