"No signal not detected" when using the monitor.

Similar Questions

• HDD not found/detected when using the UEFI Boot

  I have a HP Sleekbook 15-b035tx, which came with a windows 8 OS already installed. a few reasons, I tried to quarterback to windows 7. After several unsuccessful attempts, I finally managed to install windows 7 by changing my boot for a legacy starting sequence.
  later due to lack of drivers for win 7, I installed, instead upgraded to win 8 running on existing startup (using the MBR if im not wrong). now, I want to install a new copy of victory 8 with UEFI, but the problem is when I change my boot sequence disable startup inherited, then installing win 8, I do not see my HARD drive ... im using a flash drive to install win 8 which is already in the UEFI (I used diskpart to do this).
  also, when I use legacy boot and try installing windows, then the HARD drive is displayed and when I format the HARD drive and create new partitions, he created 3 partitions (System, MSR), reserved and the fourth for the OS. I tried to install the windows like this, but after installation, when I change the boot sequence in the UEFI even once, it does not start

  now I want to install windows in the UEFI... and I really need help with this please ... I hope I explained the scenario... If someone wants to ask anything, please don't ... as I really need this out... and also, I would like to ask that how can I check if my HARD drive has been changed from MBR of GTP

  Hello:

  I can't find the specifications of product for your model - only these introduce yourself.

  http://h10025.www1.HP.com/ewfrf/wc/pfinder?cc=us&DLC=en&LC=en&tool=&query=15-b035

  They all have Intel hardware with an nVidia GT 630M graphics card.

  If yours has the same characteristics, you can install W7 64 bit there without too much difficulty.

  I know where all the drivers.

  If you do not see the HARD drive normally you must load the sata drivers.

  See if it works in uefi mode...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash drive and the installation of W8 media plugged into the machine, boot from the installation of W8 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope that the W8 should install.

  If this does not work, and no one else can help out you, let me know if you want to install W7 x 64 on and I'll guide you installed the drivers you need.

• H.239 does not work when using the way Express of VCS.

  Hello

  on my network, I have control of VCS Cisco and Cisco Expressway to connect the external endpoin (endpoint with the public IP for example point)

  The problem is that when the network interior, I send a content (using the H.329) point public endpoints receive a presentation, but not H239.

  If I go into windows thestatists in the MCU, I don't see all the data.

  Internal endpoint static is present.

  I can do a configuration especially in the way Cisco Express to use the H.239 in internet?

  Thanks for your help.

  Fcostalunga

  Radvision endpoints both Polycon use radvision H.323 stack, while Tandberg endpoints use a single H.323 stack.

  H.323 endpoint outside the firewall/NAT must apply directly to the controller of H.460.18/19 border instead of a doorman. If you could provide file OCAP for your case, that will be useful.

• Theme not copied when using the application creation wizard

  Environment: -.
  Request Express 4.2.1.00.08
  Oracle 11 g Enterprise 2
  Browsers: Firefox, Chrome and IE
  
  Problem: -.
  We store themes standardized in a fictitious application for use in the development of new applications. We no longer seem to be able to copy these themes in an application when you use the create application wizard. A completely different theme is copied to the new application than the one selected in the wizard.
  
  Process: -.
  The steps in the wizard to create an Application are: -.
  Step 1 method - database
  Name of the step 2 - accept default
  Step 3 Pages - accept default values
  Step 4 shared - components check the "copy shared components. Choose an application with several themes in there and let "User Interface issues".
  Step 5 themes of components shared - select a standard theme by default, validate Yes
  Step 6 attributes – accept the default values
  Create the Application.
  
  The copied into the shared components in the new application is theme 26 productivity, not the theme selected in step 5. Productivity 26 theme was not a theme in the original application. In other tested environments, 21 Scarlet has been copied to the new application (even if 21 Scarlet does not exist in the original application).
  
  I can reliable reproduce this in a number of different test and development system, using different browsers. I can reproduce the problem on apex.oracle.com using a sample application as the source application (although if you select theme 25 you will need enable validation off in step 5 theme 25 will not be successful validation due to lack of a model of login page - which seems to be a separate issue).
  
  Is this a problem known elsewhere, is a generic problem in 4.2.1?
  
  Concerning
  
  Paul

  Hi Paul,.

  Thank you for raising this issue. He has already been addressed in development, and is followed with bug * 16607687 *. The fix will be available in our next release, 4.2.2.

  Kind regards
  Hilary

• network connection is not available when using the photos on apple tv

  While using Apple TV and pictures, I get a message that says don't: no available network connection.  I check other programs and they have an available network connection and all is well.  This happens intermittently, but once it happens, you will need to restart the apple tv several times and I hope that solves the problem.  I use icloud photo library and I am trying to access my photos.  Is this a known issue?

  This could be one of those cases where the message is just a generic "connection failed" message. So he doesn't mean what he says, just that it cannot connect to the server iCloud.

  Together there is automatic DNS in your network ATV settings?

  Are you sure that there is no interference from WiFi? If there is no interference, a reboot should be enough.

  When photos fails, you can use another application that uses the internet?

• Mouse not active when using the tools I refine my selection

  I have re-installed CS5 on a new computer Windows 10 PC and apply the updates by using the discussion forum contact.

  I open a file of image psd and make a quick selection on a part.

  I hit edge tool refine and move the mouse over the image.

  The mouse pointer turns into a circle with a line diagonally crossing (apparently, saying that the use of the mouse is not allowed).

  My eyebrows raised as I say to myself 'it's new

  I have reset the tools presets and refining tool options... no luck.

  What can I do to benefit from the features of the mouse while using edge tool I refine my selection?

  Thanks for the update.

  You must uncheck "Show the Original" in the refine edge of window and then you should be able to use it.

• Firepower does not work when using the Active Directory group as a rule filter access control

  I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

  -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

  -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

  -J' created a politics of identity with passive authentication (using the field I created)

  -Can I use the AD account "user" as a filter in access control rule and it work very well.

  However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

  I use

  -User agent firepower for Active Directory v2.3 build 10.

  -ASA 5515 software Version 9.5 (2)

  -Fire version 6.0.0 - 1005 power module

  -Firepower for VMWare Management Center

  Any suggestion would be appreciated. Thanks in advance.

  Hello

  You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

  Thank you

  Yogesh

• I have a problem in direct charge of path where the default values are not met when using the CSV file to load into the database while his is filled everything in plain insert queries

  -The header of the control file, I added a load direct method(append mode)

  OPTIONS(direct=true,Parallel=true,skip_index_maintenance=true,skip_unusable_indexes=true)

  DATA RELATING TO SUNK COSTS

  ADD

  INSERT INTO TEST_TBL

  (

  col1,

  ...

  Col n-2

  );

  Try to use the classic path instead.  With the direct path, many constraints and triggers, and others are disabled.  Please see the next section of the online documentation.

  https://docs.Oracle.com/database/121/Sutil/GUID-973925DA-8F86-49C1-A707-4564DC3B57AE.htm#SUTIL1330

• IP not allowed when using the developer

  I know that the developer side of CF allows you to have 2 other users. the system is locked on 2 ip addresses, but among people who do tests had the ip address change. How to delete ip addresses in administrator so I can get the new ip address to work on the site of the developers?
  
  Thank you
  
  kawalski

  Just restart coldfusion or reboot server application service that both will work to reset authorized intellectual property

  T

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• GPIB has not detected when connected to the internet

  Hello

  I have keysight power supply connected to the PXI-8880 via GPIB, it does not detect when it is connected to the internet & it was detected when its not connected. Any body can help me to solve this problem.

  Hello

  This problem occurs because of a conflict in present multiple network adapters in the system. It was a question that has used for detection of targets ethernet to the system that has been resolved. But then this question has also resolved to do the same thing. You can follow the link on how to change the order of the present network adapters in the system.

  http://digital.NI.com/public.nsf/allkb/FD9E1AF5AB1343098625736F0076DE6B

  You must also make sure that the IP addresses of the network adapters are different, otherwise conflict can happen also.

• the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

  original title: Devicewhat is the error code 21

  I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

  Hello

  We really need more information - ask in the games and/or Windows Forums for your
  version of Windows.

  Answers - Windows Forums
  http://answers.Microsoft.com/en-us/Windows

  You can also check your version of Windows, then good topic Windows: games.

  It is a question where you may need to actually test in several forums.

  Don't forget to check the known issues with the support from the game and forums, but also any device
  in question.

  -------------------------------------------

  Reboot to see if the problem comes back.

  Here are the general meaning.

  21

  Windows removes this device. (Code 21)

  Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When you try to import video JVC DVC using Movie Maker, Movie Maker does not recognize DVC using the IEEE 1394 cable

  Windows movie machine to import JVC DVC with cable IEEE1934.

  When you try to import video JVC DVC with movie maker. Filmmaker does not recognize DVC using the IEEE 1394 cable. How can I me Movie maker to see the CVN. Using XP SP2.

  Perhaps the following links will help you get started:

  Movie Maker and JVC Camcorders
  http://Papajohn.org/mm2-camcorders-JVC.html

  Movie Maker 2 - importing files MOD
  http://Papajohn.org/mm2-importing-video-mod.html

• Invoke the activity do not dehydrate when using retry policy fault

  When the political use of fault with retry behavior, invoke activities are not being dehydrated properly (even if we use idempotent = false on the functioning of partnerlink).

  This poses a problem if the process is in "canceled at the last point of dehydration" - given that dehydration doesn't is not made.

  If the Invoke is successful on the first invoke (do not have to use the strategy of fault and retry behavior), he's dehydrated properly, and if the process at a later stage makes a point of dehydration cancellation exist properly.

  So it seems to be linked to the fault policy and other code running, or perhaps some properties have not been set properly (__Non-db-persist?).

  No idea how to solve this problem?

  We use SOA Suite 11.1.1.7

  According to Oracle support, political fault retry and with idempotent = false are not compatible.

• When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  When I try to edit a room photo in photoshop elements 12, I'm not able to use the slider or one of the drop down menus. All I have is a black circle with a line through it.

  Most likely, the images are 16-bit/channel.

  Go to Image > Mode and click on 8-bit/channel and see if that solves the problem.