No signal when start and can't get into safe mode.

Similar Questions

• Computer laptop blue started upward, can't get into Safe Mode. A way to recover the files?

  Laptop was not load its on the inside before, after a week, I've sorted the problem. but somehwere an along the line of this week, that my windows 7 ultimate decided he wanted me messing around. laptops left on now but does not boot to windows. I tried a system restore, I want to avoid a clean sweep of windows if possible because it is files that I need on my hard drive. Is it possible for me to access my files? If this is not what is the easiest way to sort my laptop?

  Luqman > what is the easiest way to sort my laptop? >>>

  OK, you ready for the big guns now. First of all, turn your machine so that you can read the SNID. Then, pull out your credit card.  Thirdly, connect on http://us-store.acer.com/rcd/ 8 ^)

  Jack E/NJ

• I can't get into safe mode

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  I have Windows Vista Home Premium, and I can't go in Mode without failure.  I tried to hit F8 to each starting point that I can imagine, and it does nothing.  At the prompt, F2 goes to configuration options and F12 goes to the boot options, but I have not seen anywhere advanced startup options.

  You press the F8 key, do not press on and hold down.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html

  Read the foregoing > table of contents > Vista > second method:

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Using the method of System Configuration tool:

  Note: If you have problems to enter Safe Mode using the F8 method, don't use this method to force so that it starts in mode without failure. For reasons that why you shouldread this.

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () typemsconfigand press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     Put a checkmark in the checkbox Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

  Click the restart button to restart your computer.

• Your computer will now restart directly in Mode without failure. When you arrive at the Vista logon screen, log on to the computer and perform all the necessary tasks.
• When finished with your tasks, starting in Safe Mode, start msconfig.

• When the program is opened and you are on the general tab, select theNormal startupoption.
• Press the apply button, then the OK button.
• When the program prompts you to restart, allow it to do, and you will start in Windows Vista in normal mode.

See you soon.

Mick Murphy - Microsoft partner

• Firefox crashes, impossible to create the new profile, reinstall does not work, can't get into safe mode

  Whenever I try to open Firefox, it only open the crash reporter. When I press "Restart Firefox", it just opened another journalist to crash. I use a PC.

  I tried all of the following characteristics, does not:

  1. reboot the computer
  2. system restore
  3. Uninstall and reinstall (done this several times)
  4 remove the Firefox installation folder
  5. try to create a new profile / use the Profile Manager using "C:\Program Files\Mozilla Firefox\firefox.exe" - P, firefox.exe-p and firefox.exe - profilemanager - and all of this was, once again, open the crash reporter
  6 safe mode - literally impossible even to open Firefox so I don't know how I could do that

  I am at a loss. Any help would be greatly appreciated.

  OK, if %AppData% does not lead you in the right place you can also manually navigate to the folder with incident reports (you may need to turn on the display of the first hidden files). It is located in C:\Users\ < your user name > \AppData\Roaming\Mozilla\Firefox\Crash Reports\submitted...

• Blue screen of Windows XP, the computer continues to restart, can't get into safe mode, will blue screen with installation as disk, can enter the CMOS?

  Restart Windows xp continues and in the end, the blue screen of death leaves the following error: 0X0000007B (0XF78D2524, 0XC0000034, 0x00000000, 0x00000000) can anyone help?

  If your machine is blue-screening after booting from the XP installation disk, it suggests that your problem is with the hardware rather than auto-run.

  I recommend taking your machine to a local service shop, unless you are confident enough rooting in the bowels of your computer.

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  MacBook Pro opens to the screen and progress bar gray, freezes when the progress bar ends. Have tried several options to get into safe mode and suggested strikes, but can't. Any suggestions?

  Here are some links from Apple which may help

  How to choose a boot on your Mac - Apple Support drive

  On the screens, you see when you start your Mac - Apple Support

• Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  You have all the features non-essential related to the machine?
  Have you installed a new hardware or software recently?

  Try to do a repair install and see if it corrects the problem.

  How to perform a Windows XP repair install

• Windows xp does not start, I can't even in safe mode. I Mindprint just a black screen with the mouse arrow. What can I do

  Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

  Hello

  1 did you changes to the computer before the show?

  You can try the troubleshooting provided in the link below steps to fix the problem.

  Computer stops responding with a black screen when you start Windows XP

  http://support.Microsoft.com/kb/314503

• Bluescreen when trying to get into safe mode - stop 0 x 00000124

  It seems normal to normal mode, but if I tried to go into safe mode, it started to load files and all of a sudden blue screen.
  The code was: stop 0 x 00000124 (0 x 000003, 0x00000000, 0x000000, 0x000000)
  the zeros in the above code may not be correct, but the latest figures are accurate.
  So, what's the problem? How can I fix?

  (ps, my system's thinkpad T400 vista Business edition SP2. Was the reason why I wanted to get into safe mode, my new windows does not work recently.
  I wanted to see if I could do sth in safe mode. Anyway, it is not the problem I want to solve here.)

  Thank you very much.

  0 x 124 is a material error which sometimes causes of software.

  Since you are not able to get in good safe mode, the issue is almost certainly hardware.

  First, recommend set Optimized Defaults in the bios if possible.

  Recommends updating the bios most recent in dos mode if the manufacturer offers this possibility, then clean install Windows after the failure of the drive with Killdisk. You have certainly some problems of severe malware based on this: "my new windows does not work recently.

  Alternatively, you can put the drive into a desktop machine and then copy the last 5 files \Windows\Minidump - be careful of malware here though.

  Download them on Sky Drive public area then paste a link here. We can then in which pilots could play a role in the problem - but as I said - because the problem in safe mode, the issue is something to do with a faulty hardware.

  If you can get these files for us to normal mode by copying them on the desktop before downloading, then more power to you do it elsewhere instead.

  Check that the machine is not having a heat problem.

• How can I get to safe mode.

  I have problems with this computer. I'm not used to windows 8. operating system hard to understand. I signed on, things reappear to me to use. I registered a repair option, and he put me in safe mode

  Hello

  Let the computer start in Mode safe.  Hold down the Windows key and press R.  In the run box, type msconfig and press ENTER.  In the System Configuration window, click the Startup tab and look to see if there is a check mark in the box to start - if there is, click the box to Remove the tick and then click on apply to save the change.  Restart the computer and see if it will boot normally.

  Kind regards

  DP - K

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode. Any ideas?

  can't get out of SafeMode to start

  Hi Retodelta,

  Thanks for posting. Try the following steps. Warning: the following may make your computer unbootable. Please make sure that you have a backup before performing the steps.
  
  Click Start
  Go to the Run
  Type "msconfig".
  Press ENTER.

  In this window, select the Boot.ini tab.
  In this window uncheck the option "/ SafeBoot".

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I can't get out of safe mode when starting, and can not run the Setup program from windows XP in safe mode.

  I have a XP box that would only start in safe mode.  I needed to repair windows, so I started updating reinstall option but to reboot it says it cannot run in safe mode then it tries to boot into normal mode but crashes - which is what I am tring to solve.  Now I'm stuck because the computer is now making a loop and I'm stuck.  There is no available recovery console, it shows just the installation restart then goes into the shot.  If I try to launch safe mode, that it says cannot run update in safe mode then restarts in normal mode, which hangs then.  I'm stuck.  Boy the days where I wish I could just make the prompt C:\.  Thank you.

  You can connect your problematic hard drive to another PC to copy your important data, using a device such as:

  http://www.Newegg.com/product/product.aspx?item=N82E16812161002

  or

  http://www.Newegg.com/product/product.aspx?item=N82E16812119244

  I'm still not 100% convinced that you boot from the CD. Your Dell has the option of F12 to select a boot real-time device (as soon as you turn on the PC)? Also, remember that you have to "press any key to boot from the CD" when you see this screen! Of course, during a reboot, you start from the hard drive.

  Even if you did everything by the book, a repair installation could easily 'loop' as you describe. But as long as your hardware is healthy, a clean install is done.

• I built a new system. Transferred to the hard drive and video card, but everything else is new. Restart Windows as it begins to start. I can get into safe mode and found event id 7026 and event id 7001 in the event viewer.

  As mentioned above, this is a new system, but with a more older IDE hard drive with windows xp pack 2 service (I think). When you first start, it says that windows is not stopped correctly and asks me to choose whether to start it normally or without failure or last known working configuration. When I choose to start windows normally, it will load up to a point. The screen of Windows Xp will come with the slide bar. It will then restart. When I choose to start in safe mode, a bunch of 32 file system scrolls upwards on the screen. I don't remember if it of normal or not. He takes over in SafeMode but. I went to the event viewer and got the following errors.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7026

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The next (s) starting or starting system could not load:

  AFD

  Avgldx86

  AvgMfx86

  Avgtdix

  FIPS

  IPSec

  MRxSmb

  NetBIOS

  NetBT

  Processor

  Rdbss

  Rdbss

  Tcpip

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The IPSEC Services service depends on the IPSEC driver service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The Hello Service service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  TCP/IP NetBIOS assistance service depends on the AFD service which failed to start because of the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  Event type: error

  Event source: Service Control Manager

  Event category: no

  Event ID: 7001

  Date: 21/01/2011

  Duration: 01:18:54

  User: n/a

  Computer: CLEAR-ZONE of the

  Description:

  The DNS Client service depends on the service protocol driver TCP/IP which could not start due to the following error:

  A device attached to the system does not work.

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  I did find something online that contains all the system boot or start specific drivers. Windows and harddrive was working in another computer just before he was switched. Let me know if you need other information.

  Thank you.

  First of all you are missing probably a number of device drivers, particularly the network card driver and the driver of the motherboard.  Use your XP disk to perform a repair installation.  This should go a long way toward you're going to get.  If your new box has a driver disc that should help a lot.  You can't port XP perfectly the way you did.   It usually requires a repair installation to fix the hardware abstraction layer. Colin Barnhorst

• I forgot my password, login and can't get into my XP computer

  I forgot my log in password and I finally tyoed in the right pair, but now I don't remember what it was once again.  When I got I went into Control Panel and changed the option will appear no user at Startup icons so that I can't remmeber a password.  Then I rebooted my system.  Opps, now it asks me to choose a user to continue but has not shown.  So I have no user icons located and even if I find a way to see them again I can't remember my password.  Help, please.

  * original title - Login (forgotten) password and no icon user to enter the password (opps) *.

  Hi Timothy,.

  Try the following.

  Step 1: Try to start in safe mode. Check if you can login as administrator.

  Step 2: If you are able to connect then to change the password and make other changes. Restart the computer in normal mode to see if you can connect.

  Microsoft Windows XP - overview of user accounts

  Microsoft Windows XP - Types of user accounts

  Also, please see the article mentioned on the Microsoft Policy below we lost or forgotten the password.

  Microsoft's strategy concerning lost or forgotten passwords

• Foreign crook fooled me and now I can't get out 'safe mode' regardless of attempts to do

  Hello, Monday evening, I googled Facebook Support and found this issue of phone - 1-888-275-2174, which came as a 'techgeeks. I later found out than this fraudulent foreign (probably India) fake f * telephone number simply leads to my nightmare. They stated that they were Technicians of Microsoft, and I asked for verification of this. They said look at the Microsoft Logo at the top of our Logo certifying that we are Technicians from Microsoft, therefore, I allowed them to "interconnection" with me who ultimately turned out to be a mistake. I was calling in reference to a glitch of Facebook and the number that precedes 'i' n appeared a Google search at random. Those genius hackers through my computer to the Nether World, which I had never seen before. They were like "Speedy Gunsallus" and me couldn't keep with these brilliant super Indians of the India. Then they said "your system is fixed", and said goodbye. Well, a few seconds after the attack on my computer from "Left Field", I discovered that my computer was worse; much more serious, as before, I called this misleading number. I restarted immediately and my computer would only allow me to go is Safe Mode. I have very little capability in Mode safe and I need this computer to be fully functional for my business. I googled various solutions possible, all to nothing does not. If anyone in this community has the knowledge to help me in this disaster the mine situation and restore my computer to the normal operating mode. Thank you very much. Phone number here in my office, if necessary, is {deleted}

  If you change any of your bank details and reinstall the OS, you ask for trouble, especially when you use the computer for business.

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  You gave them remote access and if you do Internet banking, contact your bank, explain, and change passwords.

  If you use your online credit card, cancel and get a new one issued to you.

  And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Phone scam information they ring you, or you call the:

  And Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Report phone scams

  • Help Microsoft to stop cybercriminals in reporting of theinformation about your scam phone.

  • In the United States, use the form of complaint to FTC Assistant.

  • In Canada, the Canadian Centre for fight against fraud can support.

  • In the United Kingdom, you can report the fraud as well as the unsolicited calls.

  See you soon.