No small business SF200 smart switches command line interface?

Similar Questions

• Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  Hello, how is it possible to create the FAT32 BOOTCAMP on CoreStorage partition via the command line interface?

  I mean ' diskutil cs * " and so on..."

  Yes, you must use the resizeStack command. Please see Re: how to repair fsck "your drive could not be partitioned..." Bootcamp does not as an example.

• Command line interface

  How do I access the command line interface so I can set up my series of cisco router 2600. I don't seem to know where that on my netbook. What port also can connect the cable to the internet router.

  Hello

  You must Access the port console of the router using a cable from the console. Your netbook probably doesn't have a serial port to do this, so you will need a USB-serial adapter.

  Once you have, you need terminal software. PuTTy is a good lightweight program that you can download for free.

  If you want to give the internet router, you must choose a WAN port. Assuming that you don't have a HWIC-ESW in the router, any port will do.

  There is here a guide that can be useful for:

  http://www.internetworkingcareer.com/command-line/how-to-access-the-Cisco-CLI-from-the-console/

  I hope this helps.

  Kind regards

  Tim

• vSphere command-line Interface (vCLI)

  Hello

  first of all, sorry for my English...

  I'm new here and I have a question for VMWARE vSphere Hypervisor.

  I have donwloaded VMware vSphere Hypervisor (ESXi) and installed the server component and the Client.

  Now, I want to use my client "vSphere command-line Interface (vCLI)", but I can't find it on my client.

  Can someone help me?

  Greetings

  Markus

  Hello

  I think you should download the bundle separately. Please download the version of your esxi version.

  VMware vSphere 5: Private Cloud Computing, server and data center virtualization

  Post edited by: Dee006

• Essential support for creating custom reports on "Openmanage" using "Essentials" command line Interface

  Good afternoon

  Please can you help to create custom reports in "Essential Openmanage" using "Essentials" command line Interface

  The default reports are not feasible.

  Hi there Oswaldo and thank you for the question.

  Currently, OME 1.3 doesn't have a custom report generator.  I don't think that the CLI help as it is mainly used to set up from the beaches of discovery and things like that.

  There is a REST API that _may_ allow to return by the data of the database of the MEO program.  The REST API guide is in the section of the Documentation on the Dell TechCenter for OME page.

  www.delltechcenter.com/ome.

  Thank you

  Rob

• How to create a 'command-line interface' for a game?

  Hey people,

  For a game that I have to make a similar command-line interface where the user has at least 3 options to respond with, anyone know how to on this subject?

  I hope someone here can help me out!

  Kind regards

  Angela

  I don't know what part of it, you are having trouble with. Imagine for a moment that instead of asking for your end user typing something into a text input field and monitor what they type (maybe), who instead of you provide 3 buttons on your stage. Answering a press of button in this scenario as respondent to typed user input - your film something is based on the interaction of the user. Enter the user entered text scenario, a text or field sprite can detect the key ENTER and examine the string that the user entered, something like:

  on keyDown me
    if _key.keyCode = 36 then
      stopEvent
      sText = sprite(me.spriteNum).member.text
      case sText of
        "hack": -- do whatever you need to here
        "research":
        "wait":
        otherwise:
      end case
    else
      pass
    end if
  end
  

• Where can I find more details about command line interface?

  Specifically, I wonder how we remove something that has been installed, like homebrew, xcode, etc..  But, just generalities would be useful.

  https://www.Apple.com/server/docs/Command_Line.PDF

  https://developer.Apple.com/library/Mac/documentation/opensource/conceptual/Shel lScripting/CommandLInePrimer/line of command...

  https://www.Google.com/search?q=Apple+OSX+command+line+termanal & ie = UTF-8 & oe = UTF-8 #q = apple os x-command line + terminal

• Control CMD (command line interface) using Labview 2011.

  Hello

  I'm trying to control software that has an interface to command line using LabView 2011 but I have problems when reading the information.

  Is attached the VI I created so far, but it is not working properly.

  Problems so far:

  1 - if I use ReadLine(), it blocks showing no error and nothing else.

  2 - ReadToEnd () same problem as the previous line, the software hangs just at this stage.

  3 - if I compare the response of the "peek" in waiting for the - 1 indicating there is not more character, the hook of software as the previous steps.

  You have some clues as to what might be wrong or another way to 'control' the CMD to send messages, read and send messages, etc...

  Thank you very much for your help.

  I've done it before - I posted about this on the forum here: https://forums.ni.com/t5/LabVIEW/How-to-open-close-and-monitor-a-application-xyz-exe-using/m-p/32511...

  I did also wrap in a library at a given time and post it on the forums, but I couldn't find this particular post.

• Java command line interfaces seem to have limits?

  Hello
  
  The code I use normally use stuff 'old-school' process (Runtime.getRuntime () .exec ("...")) when I noticed this problem, but I have since moved to the 'new school' ProcessBuilder class (ProcessBuilder.start ()).
  
  Basically, what I do is to dynamically generate an order of command line based on some user input. It is be a netezza command ("nzload"), but I don't think it's really too important.
  
  The command that has been generated is:
  
  nzload-host 'ipaddress' u 'username' - pw "password" - db "databasename" t "tablename" securityLevel - preferredSecured - df "/ pretty/long/path/to/data/file.csv"-logFileSize 2000 - delim, - quotedValue No.
  (P.S. I got this NZLOAD command by adding an 'echo' in front of 'nzload' in my processbuilder. Output, then the published standard my order that I could copy and paste in a test outside Java shell.)
  
  If I copy/paste this line in the shell on the computer, on that copy the following code executes, it works perfectly. However (and don't forget, this line has been generated by my code), it runs using ProcessBuilder.Start () gives me weird errors. From the beginning, it seemed that errors had something to do with the quotes. I tried single quotes, double quotes, and finally I took the quotes on. So far my experience with this is that if I have even a set of quotes in there, the NZLOAD utility return strange errors like "can't connect" or something on the level of security is not wrong. It seems that maybe the quotes are somehow If incompatible in Java so it tries to take 'more' than I want only it for, say, the "hostname" parameter However, these errors are B.S. since I can run the same exact command in the command line with success (no copy and paste nonsense).
  
  For reference, my code processbuilder is something like this:
  
  ProcessBuilder pb = new ProcessBuilder();
  
  PB.Command (). Add ("nzload");
  String hn = this. Host;
  * if (hn! = null & & hn.trim () .length () > 0) {*}
  PB.Command (). Add("-Host");
  PB.Command (). Add (HN);
  *}*
  
  * if (user.trim () .length () > 0) {*}
  PB.Command (). Add ("u");
  PB.Command (). Add (User.Trim ());
  PB.Command (). Add("-PW");
  PB.Command (). Add (Pass.Trim ());
  *}*
  *//...*
  Process p = pb.start ();
  RV = p.waitFor ();
  * //grab deviation / entry and displays TI *.
  (Obviously it's an extract without any quote either. A_le_prealable, I got the quotes around all of these areas, such as pb.command () .add ("------" "+ hn +" \ "");.)
  
  (1) how can I debug this problem so that it is more generic and easy to understand (rather than use orders nzload that none of you guys probably know anything)?
  
  (2) are there any limitations/known issues with using Java shell command execution?
  
  Thank you guys!

  Where "certain limits" == "huge PITA? Can't disagree with that.

  I would not spend more time trying to debug that. I would just pass to the ProcessBuilder constructor that takes a list or an array of strings and let him deal with the problems of scoring. Or at least start with that and see if there are still citing questions yet.

• How to update the data of the CLI command line interface store

  Dear friends

  I use VMWare Server 2.0 on a debian linux server.

  I need to be able to update the store data from the command line, this because I put the command Refresh within a bash script.

  Of course, I know how the web management, but as you understand, I need to do from the console.

  Thanks for the answer, help or advice

  Robert

  Post edited by: FAsTec

  Hello

  Try vmware-vim-cmd.

  As in:

  vmware-vim-cmd /hostsvc/datastore/refresh
  

  You may need to add the store of data as a parameter.

  See also:

  http://www.VI-Toolkit.com/wiki/index.php/hostsvc/datastore/refresh

  Beware that your username must have good credentials to run the command.

  Hope this helps

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• DHCP SNOOPING TO THE SWITCH OF CISCO SMALL BUSINESS SF200-48

  Please help me. I need to know if the dhcp snooping is available in cisco firmware version 1.3.7.18.

  Hi Bonnie, as I know DHCP snooping is not on the SX200 switch. I am also unable to find documentation in Administrator's guide and release notes not stating that it is.

• vSphere command-line Interface

  I was looking at the order for the vCLI reference and have two questions:

  There are orders for the export of ovfs?  I looked good enough and could not find.  orders for the export of .vmdks could there be to make offline backups?

  I noticed there was an option for vmotion using the vCLI... which requires a license full vsphere, or is - this can be used on just the free version of ESXi with the vCLI?

  Thank you.

  The ovftool does not come with vCLI, but is available for windows, mac & linux VMware:

  http://communities.VMware.com/community/VMTN/vSphere/automationtools/OVF

  For export VMDK, you can modify the file browser scripts to catch them from the data store, or watch William Lam ghettoVCB scripts.

  For vMotion, the script works only with a vCenter vMotion-enabled - no way to get there with raw ESXi.

• Download vSphere command-line Interface

  I tried to download the vSphere CLI come and got the following error message

  Internal error

  The VMware download portal encountered an error when processing your request. We are sorry for the inconvenience. If you choose to report this error, please provide the following error information:

  Error code: QJ56

  The error date: Thu Nov 15 07:07:14 PST 2010

  4 reviews for Err:...

  Exception: The JDBC exception on Hibernate data access; nested exception is org.hibernate.exception.GenericJDBCException: could not execute the query

  Has anyone encountered this before?  And there at - it another way I can get my hands on the CLI.  I already downloaded the ESXi 4-0-4-1 update. ISO but can't find the CLI top anywhere. We are to halfway through the upgrade of two hosts ESXi and vSphere & vCentre upgrades did

  Thank you

  See screenshot

  http://downloads.VMware.com/d/details/vcli41/ZHcqYmRoaCpiZCVodw==

  

• Optical drive software command line switch

  Hello!

  Are there switches command line for the 'Optical Drive Power"- software TPSODDCtl.exe? This software is part of the package of toshiba power saver. I want to put in place to turn off my device optical drive at windows startup.

  Thank you
  Milos

  Hello Milos

  I use for Toshiba laptop more than 10 years now, and something like this is not known to me. I think that the answer to your question, that you can only get Toshiba software development service.
  I don't think that you will never get any info on this.

• change the IP address of a command-line switch 6248

  Hello
  could you tell me how to change the address of my management 6248 switch command line.
  I connect to the com port and I turn on I type my password
  and then I do not know the command?
  How to find my ip address?
  How to change?
  Thank you for your help

  Here is the link to the manual ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_User%27s%20Guide2_en-us.pdf

  Shows how to get the IP address on Page 90

  interface ip Show

  In the CLI page 358 guide, it shows how to set the IP address ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_powerconnect/powerconnect-6248_Reference%20Guide_en-us.pdf