No sound after the computer restarts

No sound in Windows 7

Well, I don't know exactly what happened, but I lost my sound in Windows 7. The first time, until I reinstalled it, it appeared after I restarted my computer. I went back several times through the system restore until he disappeared. I then reinstalled my computer and the sound was back. Then the same thing began to happen. When I get my sound back, I just lose it again after a reboot. I think the problem is Windows Update, but I could be wrong. My sound card drivers are still installed, there is simply no sound coming out of them.

I remember a lot of it before I reinstalled it, but I have advanced and tried again anyway. Unfortunately, none of this has helped me. I did a system restore to before the update, and my sound is back. I also disabled automatic updates and the sound is after a reboot. No critical updates are available, all that's left is Silverlight, I installed right before it was all happening for the first time.

Thank you for your help.

Tags: Windows

Similar Questions

  • Firefox does not start after the computer restarts

    Install Firefox, works great. Restart the computer, Firefox does not start, or finally when it tries to start the script errors occur. If I reinstall Firefox after restart of a computer, it works fine, once again when the computer is stopped at the next startup it is, will not be able to use Firefox. Firefox does not start in Firefox Safe mode, does not start in windows safe mode. Do not add now, nothing has been added, just the Firefox installer played complete the system restore on the computer, same problem. Windows 7 Pro. Remove Firefox from windows control panel, restart your computer, install firefox, will take place. shut down the computer, put on the computer, firefox does not start, or crashes. I am exploring now Web interface.

    I reinstalled Firefox, so it will run in order to perform the steps below.

    Here is the answer which took care of the problem,

    http://KB.mozillazine.org/Browser_will_not_start_up#Problematic_plugin_prevents_browser_from_starting

    "Site Web TrueSuite Log On" plugin (AuthenTec), is the question.

  • Satellite P300 - Value Added package does not work after the computer restarts

    Hello

    I have a Toshiba Satellite P300 PSPCCA Windows vista ultimate x 64. I can't do my work button soft touch. I downloaded latetest VAT package and installed. After installation it asks to restart but I restart my laptop and I make just restart Flash Card and my button works all good touch app that is silent, Media Player, etc., but once I restart my laptop it stops working.

    I tried the uninstaller and reinstalling but no luck. I read in the forum toshiba on running CCleaner and do a fresh install but still have the same problem.

    Does anyone of you knows how to solve this problem.

    BTW, I got the software AVG internet security on my system, but have added folder toshiba for exclude of realtime scanning just in case if its causing problems but not luck. I searched qurantine folder and its nothing in there.

    Please help me get my work button soft touch.

    Thank you.
    Kind regards
    Jay

    Post edited by: Jay Padia

    Hello Jay

    I agree with Akuma. All you can do is remove VAP preinstalled system and reinstall the latest version. Why you didn t follow the instructions to restart the computer after the installation of VAP?

    I installed VAP several times on my Satellite P200 and Satellite A300 without any problem, but after installing the latest version, I rebooted phone immediately. The procedure of the facilities has been completed and necessary processes started in the background. I guess that's the problem on your Satellite P300.

    If nothing is done the last step is to install the OS by using the DVD facilities. After doing this you will own preinstalled OS and everything works well again.

  • I downloaded an update and restarted my computer, received the blue screen of death shortly after the computer restarts. Now it does not start

    I don't know when the downloaded update, the computer has been restarted on September 10, 2010 to install updates. Shortlyl once the computer is restarted, I got the blue screen of death.  with the details of error like:

    Stop 0 x 000000050 (0 x 000000000000000, 0xFFFFF88001DCAE4, 0xFFFFF8A00B490027, 0 x 00000000000002) do not know if the number of zeros is exactly right in one of those, but it's super frustrating.

    I tried to restart my computer in repair as recommended (get blue screen of death), I tried to reboot normally, loop just restart procedures asking if I want to restart in repair mode.  I tried SafeMode (BSOD), I tried to restart with last working restart (restart loops), I tried to choose the "Computer repair" BSOD I tried a diagnosis and all past.

    Help!

    Thank you.

    So yes actually hear nothing helped me.  Seems that, given that the computer is not stopped correctly and my hard drive was not recognized there starting the cycle upward or give me the BSOD.  Put it in my Ubuntu CD spare which I've had since my last PC hard drive became corrupt and force back across my hard drive.  After doing this, I was able to do a boot repair, who led for the BSOD.  Not sure how that actually fixed, lost about 10 hours of my day.  So I guess I can chalk up to Microsoft and a reminder on why I should buy Mac for now on... an update shouldn't really cause such problems.

    I get that not everyone has the same PC, so it is difficult to tell if an update is bad, but he should not do this and if an update is the cause of a certain segment of consumers who are updating must be taken down for everyone, or at least the users with the configuration that is known to have problems with an update.

    Problem is solved, had to go back to a previous version of good boot where I have not install updates again.  Now, I'm trying to understand who was was bad, so I can leave my computer knows to ignore.

    Nice day.

    Just in case someone needs to know how to use Ubuntu to back up files on their PC that does not load windows, please see the link below:

    http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer/

  • Suddenly wifi does not work after the computer restarts

    After that I restarted my netbook, it is no longer connect to any wifi public my ipod has no problem. It seems that I can connect to the router but no internet and no ip address. When I connect woman manully, it acquires the router's ip address. I can't even restore the system. When I tried to open IE, my alerts firewall running TCP/IP. Please help me.

    Hi yuanlinsh,

    · What is the number and the model of the computer?

    · What is the service pack installed?

    Follow the methods below:

    Method 1:

    Disable security software and firewall temporarily on the computer and then try to connect to the internet.

     

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:

    Follow the steps from the link below: Troubleshooting network connection problems:http://www.microsoft.com/windowsxp/using/networking/maintain/troubleshoot.mspx

    Method 3:

    Also, try to reset the TCP/IP Protocol and check the results: how to reset the Protocol (TCP/IP) Internet:http://support.microsoft.com/kb/299357

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Wallpaper changes automatically after the computer restarts in Windows 7 Home Premium.

    Original title: Windows wallpaper change and the creation of new theme when the computer starts.

    Hello everyone!

    I had a problem of late with my brand new computer. Whenever I have connection or restart my computer, Windows 7 Home Premium past my wallpaper by himself to a wallpaper I had before, I deleted. When I right click and go to personalize, itmade its own unsaved theme . I delete the theme, select the theme that I wanted, close the window and it will return to normal for the length of time connected. However, even once, when I restart the computer or reconnect after I disconnect, he made this wholeagain!

    Does anyone have any idea why it would do that?

    Data sheet:

    • ASUS G73JH-A1
    • Windows 7 Home Premium
    • Intel Core i7 720QM
    • ATI Radeon 5870
    • When you play a game, the computer uses about 1-2% CPU.
    Thanks for any help!
    Jake Root
    E-mail address is removed from the privacy *.
    Hey Jake Root,
     
    a. using a laptop or a desktop computer? There are times that your laptop battery is low and the screen goes to the basic theme.
     
    b. your computer was pre-installed with Windows 7?
     
    c. do you have a software preinstalled on your computer?
     
    Your computer manufacturer might have installed something that is responsible for customization of the office and the change of paper painted. check what is running in a context (it may have an icon in the taskbar notification area). If this is responsible for customization change its settings, disable it or uninstall it.
     
    In the meantime, you can follow the below methods:
     
    Method 1:
     
    1. click on start, in the search box, enter %USERPROFILE%\AppData\Roaming\Microsoft\Windows\Themes ------(you will find files there are two: TranscodedWallpaper.jpg and slideshow.ini)
    2. open slideshow.ini > delete its content > save changes

    3. delete TranscodedWallpaper.jpg (you can substitute your own file of this name)

    4 reboot your system

    5. try to change the desktop background (right-click on the desktop > personalize > wallpaper)
     
    Method 2:
     
    You can place your computer in a clean boot State and check.
     
    There could be a possibility that a third-party application conflicts and the problem occurs.
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • User password resets after the computer restarts

    I log into admin account change the password to another account (2) (another admin account) I disconnect 1 Admin account and sign in to the account number 2.   The password works.   However, if I restart/turn off the computer the password does not work on the account #2.   I set it up so that the log information is controlled by another computer.   However, I can not locally connect you to the computer after it restarts as she forget this password is assigned.   1 account works well with its unique password.  Account 2 (the car connection) doesn't work.

    Windows 7 Enterprise 64-bit
    AMD athlon II x 4 635 clocked at 2.9 GHZ

    Have you checked the forums Smartlaunch or knowledge base?

    http://www.Smartlaunch.com/support

  • Creative cloud does not remember IDs after the computer restarts

    Creative cloud app does not remember login after restart of the computer, or simply when it starts after having turned it on. The app starts up fine and appears in the notification area (Windows 64-bit 10), but I have to log each time until I can get updates, etc. This problem started about 3 weeks ago and I still have to find a solution. Does anyone know how to fix this?

    In this case I advise you to Contact customer services as technical troubleshooting may be required.

  • PSE 13 Win 8.1 will not be installed, "detects the computer restarts" even after the computer restarts

    PSE 13 Win 8.1 will not, install "detects the computer required restarting" even after restarting the computer.

    The Mac version has installed fine on my desktop.  I now want to put the PC version on my laptop.

    Problem solved.  Seems to have been a combination of HP Support Assistant, eager to check updates and Avast2015 are not satisfied with some aspects of the installation.  Ended up uninstalling Avast, installation of PSE 13 and then re - install Avast.

  • Calendar items are deleted after the computer restarts

    Hi, I continue to have this problem with my calendar items is deleted/deactivated after I restarted my computer. Basically, I synchronize my computer pocket on two computers, one is working PC and the other my PC at home. The changes on both computers. I have edit items on my work PC and then synchronize with your handheld. When I go home, especially during the weekends, I also synchronize my phone with my PC at home. No changes are made on the handheld. These days, I just noticed that my calendar items in Palm Desktop items I have added/changed one day ago is no longer there. I've already lost a few appointments because of this. Help, please.

    With Palm desktop 6.2, there is a problem with data loss, but seen especially on Vista systems. This question was refitted at Palm Engineering.

    You close when shut down you your PC, Palm desktop or leave it open? We saw leaving Palm desktop open, when the PC is turned off, to cause a loss of data. Another cause of data loss can occur through the presence of Palm desktop open when occurs a Windows Update. If you do use a Palm desktop, close it.

    Here is a procedure to retrieve the data.

    You can recover data from your user folder as long as you only Sync once with the PC when you discovered the missing data. When synchronize you with the PC there are files created for each category of PIM in your user folder. For example; datebook.dat or appointment (according to the version of Palm Desktop) and datebook.bak. Use of Palm Desktop version 6.2 file names are .mdb and mdb.bak. 6.2, the files are in the folder of user name in PalmOSdesktop in my documents.

    The files are named .dat and .bak. When you synchronize, the current data is stored in. dat. The next time that you synchronize the data in the .dat file is copied to the .bak file. You can rename the .dat to .old. then rename the .bak to dat. If the data in the .bak file is intact, it will now be in Palm desktop when you reopen Palm desktop. I have included a link to show you how to find the userfolder on the PC.

    http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=26674

    Here's another link about the loss of data;

    http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=39503

    The best way to backup your data is to use the export function in Palm Desktop. Create a new folder on the desktop named Palm Desktop Backup data. Then, select the category that you want to export. You will get a window asking you where you want to save the file, save it in the folder created on the desktop. There is a button that allows you to select the record currently selected, or all, select all. If you do not select all, only the highlighted record is exported. You will need to name the file for export then I suggest the name of the category, for example: calendar (with the current date). Do this for all the essential data in each category. With the data exported to the folder on the desktop of the computer, you can save this data to a flash drive, external hard drive or a CD - RW. With this method, you will have your data in a separate place than Palm desktop and the device. If 'Lose you' data again, you can import the data back into palm desktop.

    Make sure that when you make changes in palm desktop or the device to export data to the folder created for the backup.

    Here is a link for other options for backing up your data;

    http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=28751

    Here is a procedure to save your data for disaster recovery, like this situation.

    The best way to protect your data is to export the data in each category of Palm Desktop in a separate folder on your PC.

    Create a new folder on your PC somewhere that suits. Name it something like Palm Desktop data. Click on the link below and follow the instructions on this page for the export procedure.

    http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=28734

    Make sure you only select everything for the beach in the export window.

    With the data stored in the created folder, make a copy of this file and save it on a USB key, cd - rw or external hard drive.

    Whenever you change in Palm Desktop, export the data that has been changed in this file and save again to external media.

    With this process you can always import the data in Palm Desktop, whenever you have a problem with the data in Palm Desktop, or if your computer/hard drive/device crash.

    Message relates to: Palm i705

  • Skype disappears after the computer restarts

    Hi all

    Since 3 days ago Skype disappears from my computer when I turned off my computer or when I turn it back on again. In any case, after every reboot I reinstall Skype, which works as normal until I shut the computer off again.

    I use Windows 8.

    I'm looking for a solution for this, but I couldn't find it.

    Thanks for the help. I uninstalled Skype before reinstalling and now it works fine. The only thing was, that the Skype icon disappeared again from the taskbar, but after I joined it there yet from the office he remained in place.

    See you soon!

  • CHKDSK cancel after the computer restarts

    original title: repair disk

    I've set up a disc error repair and try to correct mistakes and find that I have to wait to start the computer before she'll fix disk errors. However when it does not restart the computer says that repair disk was cancelled. Goin whats. ?

    Hi Starjade,
     
    I suggest to do a check disk of the mode of WinRe (Windows recovery environment) and search for the question.
     
    To run the disk check, you must have Windows vista DVD, start the computer to Win from the elevated command prompt and try to do a CHKDSK. You can follow these steps to run CHKDSK:
     
    a. use the Windows Vista DVD to start the computer from Windows Recovery (WinRE).
    b. in WinRE, open a command prompt. To do this, follow these steps:
    On the screen to install Windows, select the language to install, time and currency format and keyboard or input method options and then click Next.
    c. click on repair your computer.
    d. click on the Vista installation you want to repair, and then click Next.
    e. click on command prompt.
     
    At the command prompt, type the following command and press ENTER:
         CHKDSK drive: drive/f and chkdsk: / r.

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Black bar on the side of the monitor after the computer restarts

    Hello to all, after uninstalling Android Studio last night, I was asked to restart my phone to apply the changes. I clicked Yes, after reset but I didn't have my display (1280 x 800) full screen and there is a black bar on the right side of the screen.

    I tried to day/uninstall/reinstall my graphics driver (Intel Hd Graphics 3000) and the bar is still there. No option of scaling (fixed to maintain display scaling)

    I tried to take a picture to show the black bar on the monitor m using screenshot, but the black bar does not appear when I paste in paint.

    Can anyone help me please with my problem at hand?

    OS: Windows 8.1 64bits

    Laptop: HP Pavilion 2230us g6

    Thank you for your response. I fortunaely found a fix before I can get to your answer. I tried to uninstall the graphics driver originally from Device Manager > graphics cards > intel graphics hd 3000 > right click and uninstall > then reinstalled the driver.

    Fixed what he was going to the control panel > programs and features > uninstall intel Hd graphics driver > and reinstall the driver.

    Once more, thank you for your answer

  • Playlist becomes empty after the computer restarts in Windows Media Player 11.

    Original title: Media Player.

    I have a problem with the playlist in windows media player 11, everything works fine, except for the playlist, I created different playlist and arrange everything very well, but after I close wmp and open it again the playlist is empty, so I have to drag my lists or the song once again to the playlist. Is it possible that I can keep the songs added to the playlist everytime I closed and reopened wmp?

    Well, I tried everything but no success, I also tried on a new netbook with windows 7 and windows media player 12 installed, and still the same problem persists. Moreover, these are the original versions of windows. So the only solution I've found with my xp computer was to uninstall wmp 11 and back to wmp 9 series, I don't have this problem with this version. Also, I think that wmp 9 series is better, more intuitive and friendly interface.

    Thanks anyway.

  • DefaultGateway value disappears completely from the registry after the computer restarts

    My computer had problems. Whenever I restart my computer, the default gateway is missing from the ipconfig command, it's just an empty space instead. And with that, whenever I restart I provoke a conflict of ip to the rest of the computers on the network and the router needs to be reset to fix. I tried looking for answers and I saw a lot saying to go to
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interface\DefaultGateway. Well, I go in the folder, but there is no value at all DefautGateway, the missing values. No there is no number when I go in the chain, but there is no period of string. What should I do?

    Here's what the command ipconfig looks like when the internet works.  Hope that these peaks of work.

    http://ImageShack.us/photo/my-images/36/capturewpc.jpg/

    Looks like this when it is not, although this image is from another site, but I just want to show that the default gateway is completely empty.

    http://ImageShack.us/photo/my-images/9/missinggateway.PNG/

    I would like to show a picture of the registry too, well, idk if it was stupid, but I put in a new thing of value for the DefaultGateway as was shown on a site so atm, it is not happened, but. This is the registry when the internet work, imagine that the DefaultGateway chain isn't here since it wasn't until I stuck in there.

    http://ImageShack.us/photo/my-images/6/capture1sz.jpg/

    I can't find anywhere, do anything about what to do when the string DefaultGateway is completely absent from the registry. I'm not a computer tech so I really need help. I hope this x.x. made to sense all the

    Hi HeatherOlexy,

    Please use the mentioned link that helps you reset TCP below / IP settings.

    http://support.Microsoft.com/kb/299357

    Hope this information helps.

Maybe you are looking for