No sound after the last put to Win 8.1

After the last Win8.1 update my TouchSmart 300 is not all sounds. have already tried updating drivers in Device Manager but answer is that all of them are updated. other tha that the system works perfect with Win 8.1 and don't want to go back for Win 7


You may need to uninstall the driver for the sound and do re-installed after the reboot.


Tags: HP Desktops

Similar Questions

  • HP Pavilion dv7 - 6 c 00 Notbook: key to power WiFi stopped working after the last update 10 Win

    My Wi - Fi key is that since my last update Win 10 this week and disable airplane Mode.  No way to establish a wireless connection.  Anyone who has another experienacing cela or did I possibly an incorrect update somehow.   My Ethernet connection works fine.  Tried to update from HP Support Assistant, so that to solve the problems - and that settles it not or because it cannot find an old file to uninstall.  Ideas for a solution would be appreciated... Danny

    Hi @DPF0225,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-1245dx Entertainment Notebook and problems with the WiFi doesn't work does not correctly.

    Some say that you could restore the BIOS using factory default values with this. Here is a document that shows you how to restore the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

    You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!

    Please let me know how it goes.

    You can say thanks for trying to help by clicking on the Thumbs Up below! .

    Thank you.

  • New tab doesn't seem to work after the last update. Please fix this

    After the last update, I was not able to open a new tab (if using the menu FILE > new tab or by pressing CTRL + T). I use windows 8.1 SL 64-bit. When I restore the old version, the new tab feature seems to work.

    This problem may be caused by an extension that is not working properly.

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Touchpad - after the last update, weird grey circle icon


    Win 7 32, update

    After the last set of updates, my touchpad to display a fixed grey circle/swirl took half the time when I tried to move the cursor. Seemed to happen less if I moved very slowly. I turned off the scroll (again), and he disappeared for the most part. Can anyone confirm that this is related to the scroll?

    Yes, it is related to scrolling.

  • Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

    Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

    It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

  • Windows 7 Ultimate 64 bit freezes on startup after the last update.

    I think I have updated a major problem with the latest update from microsoft.

    I've been running windows 7 ultimate 64-bit for over a month now, as I received it for a launch party I was the host.

    That's all works fine but a few nights ago, he just stopped from upward, it just hangs at 'Starting Windows' screen, the windows logo does not yet appear.  He would not go into safe mode and startup repair couldn't do anything.

    This happened right after that I had installed a windows update, but I thought that nothing of all this at once, but one of my friends mentioned that their windows vista pc did the same thing after the last update, still, I don't think not that it was bound.

    I had no other way to get the things on my hard drive, so I tried to reinstall windows on top of the old, it does not work either.

    I gave up, I formatted the hard drive last night and just reinstalled.
    Microsoft Windows 7 Ultimate 64 bit,
    NVidia graphics driver
    Microsoft Security Essentials,
    Microsoft Office 2007 Ultimate,
    Apple's iTunes and Quicktime.

    The computer worked so very well, so this morning I came back to it, it was working fine, there was a box saying that a windows update was waiting to be installed, I clicked it, it was of course a big one because it was the first for this new install to get.  When he asked me to restart, I did, he went through his usual routine and now, as I sit typing this, I am facing screen "starting windows" frozen again.

    My processor is an Intel Pentium D
    I have 4 GB of RAM.

    There is obviously something wrong dangerously with the last update of windows, were there any other reports of this?

    Too, I recently had problems with Win 7 freeze on me. After you have uninstalled all the updates I had installed on 24 December 2011, 1 update could not be uninstalled and it was the update to sp1 of windows 7. After you have uninstalled all updates (except SP1 cause could not be uninstalled) I tried to play again the media and my system hang or aka freeze for a few seconds, and this happened even when I was gaming.  I had a lot of problems after that update, including any media type of videos to play just thrown music windows media player. After restoring my computer to a previous state (before that the updates have been installed) now my computer works normal again. So, for those of you having problems with windows and your way of thinking too yourself Uggghhh, why he did this? Well this is the service pack 1, windows now, I don't know any alternative to restore your computer to an earlier date before the updates took place, and if you don't have a win 7 is pretty smart and im sure they have a restore to the factory settings. These are the only options that helped me get rid of my system hanging up. I hope this helps some people and I'm sorry I can't guide you threw it and the steps how to restore your comp because of parameters factory all the comps are different.

  • After the last windows patchday closing all by showing the video (flash/media player /...)


    After the last patchday (last week) I can't watch videos. If I watch a flash video or a video with Windows Media Player, after a short period (1 to 5 min) Windows shuts itself. When I start Windows again, it does not open a crash report.
    I reinstalled my video card drivers and - because I thought installation may be broken - Microsoft Visual C++ 2005 and 2008 (redistr.).

    But nothing helped.

    Sometimes I can watch Flash videos all night and then all of a sudden Windows stops.

    Temperature is ok, coolers all run.

    Try a few game demos, they run well.

    I hope someone can help.

    Thank you very much!


    My Hardware Specs:

    Betriebssystemname Microsoft Windows 7 Professional
    Version 6.1.7601 Service Pack 1 Build 7601
    Additional Betriebssystembeschreibung not available
    Microsoft Corporation Betriebssystemhersteller
    SystemName NSA-01
    Manufacturer of the Systemhersteller system
    Systemmodell system product name
    Systemtyp x 64-based PC
    Intel Core i5 - 2550 K CPU @ 3.40 GHz, 3401 MHz processor, 4 Kern (e), 4 (r) processor logische (en)
    Version of BIOS/date American Megatrends Inc. 4105, 01.07.2013
    Version SMBIOS 2.6
    Windows-Verzeichnis C:\Windows
    Systemverzeichnis C:\Windows\system32
    Startgerat \Device\HarddiskVolume1
    Gebietsschema Deutschland
    Hardwareabstraktionsebene Version = "6.1.7601.17514".
    Installierter physikalischer Speicher (RAM) 12.0 GB
    Model realer GB Speicher 12.0
    Rechtssicherheit realer GB Speicher 9.74
    Virtueller model GB Speicher 12.1
    Virtueller Rechtssicherheit GB Speicher 9.47
    Big der Auslagerungsdatei 100 MB
    Auslagerungsdatei C:\pagefile.sys


    Name ATI Radeon HD 4800 Series
    PNP-Geratekennung PCI\VEN_1002 & DEV_9440 & SUBSYS_02781043 & REV_00\4 & 80E7924 & 0 & 0008
    Card Adaptertyp (0 x 9440) ATI graphics, Advanced Micro Devices, Inc. - scripte
    Adapterbeschreibung ATI Radeon HD 4800 Series
    Adapter RAM 1.00 GB (1.073.741.824 bytes)
    Installierte Treiber aticfx64.dll, aticfx64.dll, aticfx64.dll, aticfx32, aticfx32, aticfx32, atiumd64.dll, atidxx64.dll, atidxx64.dll, atiumdag, atidxx32, atidxx32, atiumdva, atiumd6a.cap, atitmm64.dll
    Treiberversion 8.970.100.7000
    INF-Datei oem32.inf (section ati2mtag_RV7X)
    Farbebenen not available
    Farbtabelleneintrage 4294967296
    Resolution 1440 x 900 x 59 Hz
    32 bits/Pixel
    0xE0000000-0xEFFFFFFF Speicheradresse
    Speicheradresse 0xF7E20000-0xF7E2FFFF
    A-E-Port 0x0000E000-0x0000EFFF
    IRQ channel IRQ 4294967294
    A-E-Port 0x000003B0-0x000003BB
    A-E-Port 0x000003C0-0x000003DF
    Speicheradresse 0xA0000-0xBFFFF
    Treiber c:\windows\system32\drivers\atikmpag.sys (, 351,50 KB (359,936 bytes), 16.11.2012 20:39)


    Try following the s method provided below and see if it helps:

    Method 1:

    It may be that a third-party application is causing this issue. Put the system at boot. Follow the steps mentioned in the article given below to configure the system to boot and check.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7     

    Note: Once you have finished installing, follow step 7 article to start on normal startup.

    Method 2:

    Also check the power options, if your computer is configured to stop when idle.

    a. power by clicking on the Start button, open the Options click on the Control Panel, clicking system and Maintenance, and then clicking Power Options.
    b. in the select a power plan page, click on change settings for the plan under the selected plan.
    c. on the parameters of change in the plan page, click on change advanced power settings.
    d. on the Advanced Settings tab, expand lid and buttons power, expand power for the start menu button and then do one of the following:

    If you use a laptop, click on battery or plugged in (or both), click the arrow and then click sleep, Hibernate, or Shut Down.

    If you are using a desktop computer, click setting, click the arrow and then click sleep, Hibernate, or Shut Down.
    e. click OK and then click on save changes.

    Here are the articles that should give you more information on this topic:

    Check if you find an error recorded in the event viewer.

    Open event viewer

    WHat information appears in newspapers events (Event Viewer)?

    Hope this helps, let us know the status of the issue.

  • After effects CC / CC encoder Media rendering bug after the last update version / 2015.3

    Hello community,

    After the last update CC, I have a big problem. There is a problem of sound reproduction of the AE through the Media Encoder. When I export directly from AE everthing is fine but when I send the export files via dynamic links to the Media Encoder I get wrong its encoded at the last second of the clip. Curiosly there is a part of the track to another point on the same track in there. There is a sharp break and then in the last second you can hear just a random sound fragment (in this case a femal voice). It's hard to describe. Here's a link wetransfer where you can hear what I'm talking about.


    Like many I noticed it any project, how often or which format settings... it's always the result. We are doing on the production of air... I need to solve this urgent problem.


    This problem is fixed in update fixes after effects CC 2015.3 (13.8.1). This update, available now, can be installed by using the creative Office Cloud app, or by choosing Help > updates within any Adobe application.

  • XAV-701HD questions, even after the update - changing Staion, no sound after the cycle of keys.

    I have a Sony XAV-701HD installed in my 09 Ram. I have had for a while now and still have problems even after the last update of the firmware. Since I installed the radio, the stations would change when I turn off the key and then restart the truck. Ususally a station off where I was listening. Then I noticed that when you listen to a CD, if I stop the truck, stop, and restart, I have sometimes no sound from the CD unit that change source to something else then back to CD. In addition, it seems to take an eternity for the CD start playing when I insert one, or when I start the truck every morning. Sometimes the CD start just up, other times not. Now, I've added SiurisXM to the unit, and I noticed that when I turn the key off the coast, and then back on, the device will not be playing Sirius Music until I have changing source, let the next launch of source for play, then switch back to sirius. I'm a professional installer, I know all my wiring is good, everything works. My Kenwood has worked perfectly in the same truck for 2 years before I changed to the Sony. Any ideas?

  • How to remove Code condition on iwatch after the last update

    How to remove Code condition on iWatch after the last update?


    On your iPhone, in the application of the watch, go to: My Watch (tab) > password - tap on disable password.

  • iMac does not start after the last security update


    After the last update my iMac (late 2009, El Capitan) does not start.

    The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

    Does anyone have any advice for me?



    a solution that helped me:

    Re: security update causes damaged Apps

  • After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

    After the last update of Firefox, youtube videos do not play. The answers I've found are not relevant or too complicated.

    Hi Cbella, YouTube is generally used with an HTML5 player, who is a player who does not use a plugin video in MP4 format (for example, it does not use the Flash plugin).

    Now, I based this assertion on Windows, Mac may vary.

    Could you do two tests for me?

    Test #1:

    To verify which player you see (which does work), try a right click or Ctrl + click on the YouTube Player and check the "context menu" that rises. If it's the Flash, there will be a menu short, referring to the Flash on the last line. If you do not see that, if you get a regular menu of Firefox, it's probably the HTML5 player.

    Are what player you?

    Test #2:

    If you open the following test page, which videos to play?

    • The video "H.264/MP4" play?
    • The video "WebM" play?

    Thank you.

    Also, you can check if your Flash plugin is up to date? You can use the site Mozilla Plugin check for this (please ignore the other plug-ins page wants you to update at the moment avoid making the situation more complicated):

  • Java plugin for Oracle hangs after the last update

    As part of the requirement of the Oracle, we run JRE 1.7.60
    To update firefox this morning and now the plugin is constantly crashing.


    Thanks for your reply, but I doubt that flash player is related to do with Java.

    And the Java applet crashing in my browser, I guess, should not be linked to my graphics driver, especially since the only update that took place was an update of firefox.

    In any case, Firefox for some reason any launches 2 additional tabs when executing the Java Applet (IE does not work). In the past, I'm used to close the first tab, since it contains nothing except an Oracle logo.
    However, it seems that after the last update of firefox, if this tab is closed, it cause Java to crash.

    Therefore, do not close the additional tabs by the Java Applet. However, this has never happened before, do not know what has changed in the latest version of Firefox to make it happen now?

    Thank you

  • After the last update of Fire Fox, made today, to version 36.0.1, the key word. URL Hack 0.4.0 doesn't work anymore.

    After the last update of Fire Fox, made today, the 36.0.1, the "Keyword.URL Hack 0.4.0' version will stop working.
    I tried to update the url pirate, but there is no new version...

    Hi reoz, could test you with the two "features Google" keyword search Options page: I'm lucky and search by name. Perhaps one of those is the specific method you need instead of Google generic.

  • users on android like me are reporting that Firefox crashes after the last update 35.01

    BONES of Firefox crashes on android, after the last update 35.0.1 can you fix with a update guys please I use Hudl 2

    Yes, sorry about that. Now, that should fix, we have released an update. Your device was basically downloading a generation for devices Android ARMv7 based instead of the Intel x 86 version.

Maybe you are looking for

  • The alarm will work even if my phone is turned off?

    I was wondering if the alarm on Apple Watch still works even if the phone is off or out of range.

  • Cannot add item from table to table 1 d

    Good afternoon It comes to Teststand 4.2 I have a LabView module in my sequence that takes a 1 d of the 'settings' table and returns a table 1 d of the 'results '. The problem is I can't add a parameter array element, but I can add an element of resu

  • Wireless connection from laptop to mobile route access

    I tried to connect my Internet to my laptop HP Sony X 10 mobile via wifi wireless. After that I created the wifi profile I can't find wifi on my mobile search and found the list name. My laptop computer adapter works correctly and configured. My mobi

  • Problem with dragging a video to the scenario

    I have the latest version of first Pro CC 2015.3, and I have a problem with the drag the video to the Timelime. Video and sequence settings are the same.Type: MPEG MovieImage size: 1920 x 1080Frame rate: 25.00Audio Format: 48000 Hz - 16-bit - stereoP

  • Defining form fields such as required based on the entry in the drop-down list

    I'm trying to set the properties of a few form fields as required in the case of a specific value is selected from a drop-down list.I entered the code of the tab actions from the drop-down list properties below > mouse down > run a java script. The p