No sound after updates

Similar Questions

• WhatsApp sound after update ios10

  Hello, after updating to ios10 my sound of whatsapp is identical to my e-mail (threetone). In whatsapp, I chose a different tone but no matter what I do, its always the threetone. Can someone help me with this? Best regards, Gerard

  Have you updated the Whatsapp application lately?   A couple of days, they have released an update for iOS 10.

• I had to reformat after an attack from windows xp repair. No sound after updates

  I had to reformat after an attack from windows xp repair.  After the installation of Windows and all of the things drivers worked very well.  After updates, no noise.  So I reformatted again, installed Windows and all the drivers except the sound.  Done all updates, and then made the hardware update for my sound card in Microsoft.  Its worked. Tested with the music of the sample, had all of the clicks et al.  Then I restarted the cpu.  Turn off its worked, the turn is heard started and stoped the half way through.  No more sounds.  I tried all the round he took back on things.  Can someone help me.  My cpu is a Dell XPS 400 Dem, card his Creative SB Audigy 2 ZS (WDM)

  I think I'll try another sound card.  You pc is quite old and components go wrong.

• Videos playing only with the sound after update 49.0.2

  After updating Firefox to 49.0.2 I have problems with videos on sites like: http://www.cc.com/video-clips/07m87l/the-daily-show-with-trevor-noah-donald-trump-hints-at-a-not-so-peaceful-transfer-of-power or http://time.com/4514971/iphone-7-worlds-tallest-building/

  It has sound, no picture, just black background. Decommissioning of 48.0.2 helped, but Netflix videos do not work on this version.

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful. (2) in the above list, type or paste async and pause search box while the list is filtered (3), double-click the preference dom.ipc.plugins.asyncdrawing.enabled to switch the value from true to false

  This may not take effect until the next time that you exit Firefox and start it again.

  One of the changes in Firefox 48-49 title is e10s, separating the process of browser interface process page content. The performance impact of this can vary a lot between the systems, and it would be useful to know if you have this feature enabled. To check this, either:

  • button '3-bar' menu > '? ' button > Troubleshooting Information
  • (menu bar) Help > troubleshooting information
  • type or paste Subject: support in the address bar and press enter

  In the first table on the page, find the line of Multiprocess Windows and see if the number on the left side of the fraction is greater than zero. If so, you are using e10s.

  If you use e10s:

  To determine if this feature is causing this problem, you can turn off as follows:

  (1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste the cars and make a pause so that the list is filtered

  (3) double-click the preference browser.tabs.remote.autostart.2 to switch the value from true to false

  Note: the exact name of this preference may vary, but it will start by Browser.Tabs.Remote.AutoStart

  On your next startup of Firefox, it must be run in the traditional way. Any difference?

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• I lost my sound after updating my audio and video drivers

  After the download and installation of updates of my audio and video drivers, I lost my audio device. My Volume mixer, I get the message "no audio device is installed". At this point, I am really confused and frustrated after sent to websites other than Microsoft to get answers. Any help will be greatly appreciated.

  I have updated drivers AMD and ATI Radeon, neither of which are on my task bar more as they were before the update.

  I use "Windows Vista Home Premium Service Pack 2" at the moment.

  Model: HP Pavilion dv7 Notebook PC
  Processor: AMD Turion (TM) X 2 Dual-Core Mobile RM-72 2.10 GHz
  System type: 64-bit Operating System

  Hello

   
  I suggest you to follow the steps in troubleshooting section and check if it helps:
   
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
  
   
  Also, follow the steps from the link:
  Don't fix no sound or Audio problems in Vista
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00833257&tmp_track_link=ot_recdoc/c00898606/en_US/c00833257/loc:1 & cc = us & dlc = en & lc = en & Printable = yes & product = 18703
   

• name of product-HP Pavilion dm1 Notebook PC, you hear no sound after update window 8

  name of product-HP Pavilion dm1 Notebook PC

  product number - QB382PA #ACJ

  After the update for a few days, I could hear the sound of my laptop. now I'm unable to get sound and same card for my sound device. Help me solve this problem. Thank you.

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows 8.

  Kind regards

  DP - K

• Alarm brings more sound after updating iOS 10

  The alarm makes more no noise. I updated my phone a few days ago and initially, it worked, but now when the alarm "goes off" there is no sound. The volume is on and more strong, the phone rings when someone calls and other notifications make noise, but not alarm. Even when you choose a different alarm, no sound (usually, you hear a sample of the alarm). That I am I doing wrong or what happened?

  Same problem, restart a phone help but only for a few days...

• No sound after updating the BIOS, no error mssg.

  my sound was working fine yesterday, had a mssg. This morning updated the BIOS and now it has nothing, using windows 7 mobile home on HP Pavilion g6, what happened

  Check the message asking you if someone is online to help the

• No sound after updating Windows on HP Pavilion g6 8.1

  PC updated for Windows 8.1 today and now have no sound at all and the pc says without a helmet or the speakers are plugged and detection detects without problems and also the 'properties' of AMD say sevice work properly (I have no drivers back back to list)

  HP Pavilion Notebook PC g6

  Product C6M11EA #ABU number

  8.0.0.8807 driver version

  What can I do to get her back?

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59620.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, turn off the laptop by pressing the SHIFT key when you click farm to temporarily prevent a hybrid boot.

  When the laptop stopped, disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• still no sound after updates now, I get dll. / Systeme_windows 32/shdock.dll

  Hello

  I don't know how to come back to my original thread about the lack of sound tried everything suggested. This computer is now an improved dell dimension XPS service pack 3 which gave me desktop. I was recently given a wireless mouse to my son for mother's day. After he helped to install it and I had removed the adobe flash player and reinstalled it I still had no audio. I did search and destroy, removal of beta Mozilla and reinstalled mozilla 12 drivers reinstalled Dell and unzipped (Bill Smithers advice) and system restore, went back 2 days where worked the audio (I think that was suggested to my email address and a moderator today) but I tried it yesterday.

  Thanks again to all who have helped me!
  Bill Smithers
  XPROCKS
  Mind X
  Moderator Jeff?

  Also various other

  I visit this forum daily even if things are working right just to learn. I hope that I continue to make progress with this computer and the internet, I would be able to help others, I just need to build a little more confidence and experience. Please help me to know if I do not have this right of forum. Voice, answers, that sort of thing.

  Sincerely,

  Gina Davis

  Assuming that your sound card is not defective, back up your sound should be pretty easy. As I suspected, your computer has been infected by malware. For now, we will make sure that your computer is infected is more then solve the sound problem.

  Please click HERE. Locate the uninstall program to uninstall your version of AVG... Once you have completed uninstalling please uninstall SpyBot Search & Destroy. After uninstalling SpyBot, click HERE. Download aswMBR and run it. After clicking on scan, you will be prompted to download the Avast antivirus engines. Please choose Yes for the option. Allow the analysis to be performed. Once completed, if the text in the window of the scanner appears in red text click on fix. Follow the prompts to restart your computer.

• No sound after updating windows 8 on hp laptop

  Hi, a few days ago my computer hp laptop is an automatic update of the W8 and since then I have no audio sound. He brought back several times, but he disappeared again. I did all the troubleshooting I could, etc not mute, volume etc and the said system is that there is no fault. But the sound is just not there. I've only had a few months to this pc and I'm not happy! Do I need to download a driver or something? Please help, I need my sound!

  Hello

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp62001-62500/sp62310.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59656.exe

  When you're done, shut down the laptop by holding down the key SHIFT left click Shutdown to temporarily prevent a hybrid boot.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the installation of Realtek Audio program and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  Left click 'Speakers and headphones' (or speakers/HP) once to highlight and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Inspiron E1505 Vista no sound after update

  There was a Microsoft Update on 16/10/08 and now my sound on desktop icon has a red X.  I checked the site updated driver and driver is correct.  All speakers are supposed to function properly.  Can someone advise me?

  
  

• Eliteboook 8440p: no system sounds after updating windows 10

  Hello guys,.

  Because I've seen a lot of you guys out there have already updated your Windows 10 pc, I also decided to update mine elitebook 8440p Windows 10 last week. All goes well until I discovered my audio system was no longer working. It seems that audio systems are disabled. Does anyone know how to fix this? I'm happy to hear your suggestions: =).

  Peter wrote:
  

  Hello guys,.

  Because I've seen a lot of you guys out there have already updated your Windows 10 pc, I also decided to update mine elitebook 8440p Windows 10 last week. All goes well until I discovered my audio system was no longer working. It seems that audio systems are disabled. Does anyone know how to fix this? I'm happy to hear your suggestions: =).

  Hi Pierre,.

  Please follow this link here http://support.hp.com/us-en/document/c04973149 this works a lot incase you have upgraded to windows 10. Please an update of progress. Good luck!!

• not strong enough after updating iTunes

  Hello

  After updating iTunes yesterday, itunes is not as strong as before; of course, I changed volume in the menu bar as well as in volume ('her') maximum system configuration. If I use VLC, the volume is OK; Therefore, I don't think it's a problem of speakers of the Mac and iTunes.

  Thank you very much for your help

  Haperic

  Hello Haperic!

  From what you have posted, the sound after update of Mac is not as strong through iTunes but is fine using VLC or other applications. We certainly have to check a few things with the volume.

  If you haven't done so already, we'll leave iTunes in the menu next to the  iTunes when iTunes is active. Then quit iTunes.  Or command + Q on the keyboard.  Open later and try to play a few things after.

  No change after that, then go ahead and restart the Mac and try again, please.

  If it's still the same after the restart, then we'll reset the NVRAM/PRAM memory.

  How to reset the NVRAM on your Mac - Apple Support

  Reset the NVRAM

  1. Stop your Mac.
  2. Look for the following keys on the keyboard: command (⌘), Option, P, and R.
  3. Turn on your Mac.
  4. Press and hold the Command-Option-P-R keys, immediately after hearing the startup sound.
  5. Hold down these keys until the computer restarts and you hear the tone of starting for a second time.
  6. Release the keys.

  After resetting the NVRAM, you may need to reconfigure the parameters of the speaker volume, screen resolution, selection of boot disk and zone information.

  I hope this helps.  See you soon!