No sound after using headphones

Similar Questions

• No sound on the Satellite U500 speakers after using headphones

  Hello!

  I used the headset on the laptop, and after I unplugged it, the laptop speakers do not work, if I let the headphone jack on the inside (I push it inside until I feel some resistance).
  It was the first use of the helmet and before that the speakers worked correctly, as well as the helmet still works correctly.
  Any suggestions?

  Peter

  Hello

  Usually after withdrawal pregnant portable headset should be turned on automatically.
  Check please the playback devices in the sound properties and make sure that the speakers are turned on and set them as default device.

• No sound after disconnecting headphones

  I am currently using motorcycle g (1st generation). Sometimes, when I unplug the headphones, no sound is subsequently. So, I have to restart my phone. All the patches? Help me please.

  just restart your phone and it works perfectly fine, I alsi face this problem

• No sound when using headphones.

  Hello

  I have a Dell Laptop Inspiron N3010 Windows7 running.

  Audio works fine with the speakers, but when I insert the headphone jack I can't hear any sound with headphones. (The Mute speakers as expected.)

  I tried 3 different helmets, I don't think that the problem is with them.

  Does anyone know how to fix this?

  Tzachi

  Hi Tzachi,

  Please check the selected audio device as ejn63 said. Also, try to update the audio drivers and check the functionality. Here are the steps:

  • Click on the link: http://dell.to/123NfbT
  • Download the drivers and follow the prompts on the screen to install it.

  Check whether the problem is resolved. If the problem persists, update THE system BIOS. Here are the steps:

  • Click on the link: http://dell.to/1bOmBFK
  • Download the BIOS and follow the prompts on the screen to install it.

  Note: Make sure that the power adapter is connected and the battery is charged at 10% or more to update the BIOS. Furthermore, disconnect any external devices before the BIOS update. All programs should be closed and saved documents.

  I hope this helps. Answer please if you have any questions.

• Sound seems to be decreasing after that I have used headphones, or turned down the volume.

  I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
  I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

  Hello

  1. What is the operating system installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the article, and check whether the problem is resolved or not.

  No sound in Windows (Windows 7)

  Note: this also applies to Windows Vista and Windows XP

  Hope that helps.

• Qosmio F50 how to disable external sound using headphones

  Hello

  Just a quick question.

  Does anyone know how can I disable the sound of my Qosmio F50 external when I use headphones?

  Now when I plug in my headset to use Skype or listening to music, the sound still explosions out in the room. I can't understand how to turn off the sound without also disabling the sound in my headphones...

  See you soon!

  Hello

  I have the Qosmio F50-113 in front of me and I have tested al.

  When you connect the headphones/earphones for the first time the Manager Realtek HD Audio will appear on the screen and the small window in front of it.
  This small window will inform you you this new device connected and ask you what it should be recognized.
  There are three options:
  Headset
  Audio output device
  Output S/PDIF device

  The first headset option is set to default. When you click OK, you can hear the sound on the headphones but the laptop speakers are turned OFF.

  So I assume that there is a bad option, and you have probably disabled the option for this small window pop up.

  Please, open Manager Realtek HD Audio new (Control Panel) and make sure that the speakers tab is open. On the right side you will see the little icon. It looks like the folder icon. Click on it and select the option.

  So start the music and connect the earphones again. Whenever the pop - up make sure you chose option for headphones.

  So I tested it on Qosmio F50 and it works.

• Satellite A200 - no sound using headphones

  The headphones not cut the speakers when connected to Satellite A200 - 14 D. No sound in the headphones.
  Could you please help me?

  Kind regards
  Aurélien

  Hello Aurelien

  I don't think driver update will help and it's probably mechanics problem. In the headphone port, there is little switch that should disable the functionality of s intervening every time when you want to headphones.

  Sorry, but I don't think you can do something alone. With short words: I think that the helmet is defective.

• No sound when using a headset? 7 7 iPhone

  I've recently set to upgrade to an iPhone 7 latest updates installed and have clearly wonderful audio using speaker phones, but as soon as the headphones are plugged, theres little or nothing then vanish its pointless. The headphone volume is at full throttle and phone recognizes they are there, and today he said could be a problem in my iTunes account - where are the settings in iTunes to study and does anyone know a way to fix the inaudible? Help greatly appreciated!

  Hello and welcome to Apple support communities, Iarns82.

  If I understand your message to the right, when you use headphones with your new iPhone 7, there is no sound or the sound is very low. I use headphones with my own iPhone almost everyday, so I can certainly understand how it is important to get the best possible sound for the steps. I'm very happy to help you with this.

  The first thing that I recommend you do is try the sound with another pair of headphones. This will help determine if there is a problem with your headphones, or if the problem is with the iPhone itself. If the same sound problem occurs with a second pair of headphones, let's check some settings of your phone:
  

  1. Open your application settings.
  2. Select music.
  3. Enable the control of sound. When activated, your iPhone will detect when you play naturally music has low volumes and he will adjust accordingly.
  4. Check if the Volume limit is on. If this is the case, drag completely to the right to turn it off.

  Then, test your sound using your headset. If the problem persists, follow the steps If your headphones do not work with your iPhone, iPad, or iPod touch, specifically, this section:

  Look for debris, damage or loose connections

  1. Look for debris in making headphones for your iPhone, iPad or iPod touch.
  2. Check your cable to earphone, connector, remote control and headphones for the damage such as wear or breakage.
  3. Search for debris on STS on each earpiece. To remove debris, gently brush all openings with a small brush bristle that is clean and dry.
  4. Firmly plug your headphones in. If your iOS device has a case, remove the case to get a good contact.

  After you have gone through these steps, test again your helmet.

  Thank you for using communities of Apple Support.

  Take care.

• I have no sound after installing Windows update security.

  Help, please! I don't have a solid any after that auto update installed some update Windows security. Not even system sounds work. I tried to use headphones too. I checked Device Manager and my Creative Vibra 128 sound card is enabled and working. I updated the driver for the card and the sound seemed to be coming back, but after the reboot, no sound again. My speakers have been tested separately on a different system and they worked very well. But I still have no sound coming out of my PC.

  DirectSound test results: failure at step 3 (DirectSoundCreate): HRESULT = 0 x 80004005 (failed generic)

  My system info:

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  Manufacturer of operating system Microsoft Corporation

  Name of the system *.

  System manufacturer VIAP4M

  AWRDACPI system model

  System Type X 86-based PC

  Processor x 86 family 15 model 1 Stepping 3 GenuineIntel ~ 1699 Mhz

  Version/Date BIOS Phoenix Technologies, LTD 6.00 PG, 18/07/03

  SMBIOS Version 2.2

  Windows C:\WINDOWS directory

  System directory C:\WINDOWS\system32

  Boot Device \Device\HarddiskVolume1

  Locale *.

  Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).

  User name *.

  Time zone *.

  Total physical memory 1 024,00 MB

  Available physical memory 395,46 MB

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 2.33 GB

  Paging file C:\pagefile.sys

  It would be possible that the reason that your registry database seems to zero after the reboot is your antiviral is preventing to be changed when you update your drivers.  but this is only an idea unproven, but a possibility.

  in all cases, try to do a restore point for today / now.  This will take a snapshot of the current state of the system.

  Then, see if you can restore your computer state before the update that would have saved the drivers work and functional setup for your speaker system.

  my suggestion is to run a system via safe mode restore it if the anti viral theory is true, that it will not impede the process of restoring system in safe mode.

• Lost after that computer woke up from his sleep and sound after the Microsoft Fix It

  Original title: no sound

  Hello.

  No sound from my computer.  The Conexant device work properly.  Volume is in place on the speakers and the sounds of Windows.  Windows Media Player is not cut.  No speakers or headphones are involved.

  This problem started a couple of weeks, when I ran Microsoft difficulty It Center.  I used the difficulty It Center because I always lost sound after that my computer is awake to being asleep, which means that I always had to reboot to get the sound.  But now there is no sound whatsoever.

  Can you help me?

  Hello

  You can refer to the following link to download the latest version of the Toshiba support drivers.

  Toshiba support

• No sound after system reboot

  won't help.

  my sound on my computer used to work. but currently, the sound was very quiet even when it is full volume. now no sound speakers. I tried to use headphones in the computer, but it was the same thing. Ive tried uninstalling and renstalling the hard drive but nothing has changed. It happened after we did a complete remission to zero of the system. any ideas on how to fix it?

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• HP d530: no sound after installing windows 7

  Help, please:

  My HP d530 sff (DG058A) no sound after that I installed windows 7, I think it is an ADI SoundMax AC97 Integrated Digital Audio Driver. Can you please link me to the driver audio latset.

  Concerning

  Hello:

  You should be able to use the driver Vista support page of your PC.  Install and reboot the PC.

  This package contains the audio driver for the ADI AC97 Digital Audio Controller integrated in the supported desktop models and operating systems. -Provides the initial version of the drivers for desktop models and operating systems supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp36501-37000/sp36530.exe

• Satellite L850 - 12 k - Echo using headphones

  Hello.

  I have a little problem.

  I hear the echo in the headphones.
  Noise on the speakers are normal.

  I have not installed a software to change the sound effect. the headphones are in working condition. On another laptop works normally.
  I would like to know if it's the fault of entry or the fault of the parameters.

  THX :)

  It is not easy to say why this is happening. I don't know what model of laptop you have and what operating system you are using then try please check all the sound options in the control panel and try to change some settings or the default value.

  Is there a possibility to test with another helmet, just to see if the same thing happens again?

• Qosmio X 870-152 - no sound after random freeze

  As the title says my laptop no sound after a random freeze,.
  with the loss of the sound also came the problem that I can not use my setup more that it does charge more.

  I can also levels below configuration screen as my system.

  Solver of problems Windows says that windows audio or an audio endpoint builder does not work propaly, but will not be can not solve

  If anyone has an idea of what I can do or what happened please tell me

  T is not easy to tell exactly what is happening on this virtual path.
  When your Qosmio freezes you have to like what's next? To restart Windows OS or what?
  Is everything OK again when your Qosmio restarts?

  You know that's not easy to understand exactly what is happening. Is there an error message?

  Maybe you should reinstall OS and test functionality with the 'settings '.

• My Satellite L30-101/XP sound comes from headphones but not pregnant

  I have a black XP newly installed on my system and installed everything except the sound does not come from the speakers but when I use headphones sound works perfectly. I thought it was problem with XP, so I then installed Vista but still the same problem.

  Then I went back to XP because I'm more comfortable with it.

  PLS HELP >

  Hmm. Maybe there is something wrong with the speaker system?
  I mean if you can hear the sound using headphones then your sound driver and sound card should work properly.

  Did you also check the settings in Realtek HD audio Manager?
  On the right, you can find the settings for the helmet. Please check what options is enabled or disabled.