No sound from Logitech webcam

Similar Questions

• No sound from headset and webcam does not start

  original title: headset and webcam.

  When I start my webcam window does not appear to not allowing no not another friend to view my webcam. How to configure to make it work as it should. Hercules webcam.

  Then when I plug in my headset no sound is heard. The button is not muted and the volume is at full capacity. I tried to put nothing works, and the driver works. How to configure it to allow it work correctly. Logitech headset.

  Hi freddychin,

  1. all these latest changes on the computer?

  2. is the web camera detected by windows?

  3. what web camera program do you use?

  4. are you unable to hear the sound with the headset?

  First connect the headset to the USB port or another computer and check if it works.

  See the link below to see the manual for the web camera know how to configure it.

  http://TS.Hercules.com/eng/index.php?PG=files_faq

  Check out the link to the Web from Logitech site and try the steps mentioned only if the helmet works on another computer below.

  http://forums.Logitech.com/T5/Internet-headsets-phones-read/Vista-SP-1-disables-Logitech-USB-headphones/TD-p/220543

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Webcam from Logitech (2) does not not - impossible to install the software

  I tried two webcams from Logitech.  #1 webcam installed OK, but the sound did not work.  The video worked fine.  I went to properties, downloaded drivers, went the whole 9 yards, no noise.

  Try to work with Webcam #2 (Quick Chat) and get this message when I run the software: this program is blocked due to compatibility issues.  Found the drivers and downloaded.  Yet once the vid does not have the audio type argument.  Realtek HD audio installed in Device Manager.

  According to the box, Quickcam Chat is compatible with Windows Live Messenger.  Not one of these webcams does not work and I wonder why?

  If none of the Logitech webcams works with Windows?

  Operating system: Win7 64 bit

  Webcam model # V - UAP42

  * Frustrating *.

  If anyone knows WHAT the webcam works with Win7?

  Talk to Logitech support and it seems none of these work with Win7 64 bit.  Does anyone have recommendations for webcams that work with Win7?

  Hello

  Thank you for joining Microsoft Community where you will find all the necessary information on Microsoft products!

  You can't seem to get its model V-UAP42 number using Quickcam Chat camera.

  I imagine the frustration you feel when you are unable to get sound using a device.

  The problem may occur if the driver is not compatible.

  On the Logitech site, it seems that different software are available by Quickcam Chat camera.

  See the site:

  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/3428/section/Troubleshoot/CRID/405/lt_product_id/281/tabs/1, 3,2,4, 5/cl/we, fr

  I suggest you to install the driver for LWS 1.1 x 64 with Vid on the site mentioned above.

  If the problem persists, try to install the drivers in compatibility mode.

  See the site:

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-in/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone?

  Webcam with integrated microphone.

  Webcam with integrated microphone. Very low sound MIC, but also an ai Genius separated from the webcam microphone. How do we install the additional microphone? more details on settings please

  to check your setting first:

  Right click the speaker icon in the notification area and choose: Adjust Audio properties.

  Or: Control Panel, sounds and Audio devices.

  Volume tab: click Advanced under Speaker settings and open the drop-down list for the speaker setup and choose your speakers, click on apply.

  Click the performance tab and move the sliders to the complete and best, click OK.

  According to the Volume of the device, click Advanced.

  On the page of the Volume control, click Options in the menu, click Properties.

  Mixing should be your system and not one of your pickups.

  With reading selected all the check boxes.

  Click record, peripheral mixing system, check all the boxes.

  Click play again, and then click OK.

  Volume control, "as you like it".

  Vague, put the max slider.

  All others are ok in the middle.

  Close the Volume control.

  Now we will install your micro Genius:

  Click on the Audio tab:

  Audio playback: System.

  Sound recording: click the menu drop down and choose your Genius mic, click on apply.

  Click the voice tab:

  Reading of the voice commands: System.

  Voice recording: click the menu drop down and choose your Genius mic, click on apply, click OK

  When you want to use your Web Cam microphone, you will need to go back and select again instead of your micro Genius.

• Impossible to install the driver of Logitech Webcam - error code 19

  Hi gurus,

  I just buy Pavilion m9400t with Vista x 64, Dual Core Quad Q6700.

  Install Logitech QuickCam Pro 4000 without problem, so I decided to upgrade with the new webcam (Quickcam communicate Deluxe) and the beginning of the problem.  Install the new driver/software without problem, after reboot when I try to use the Webcam webcam cannot be used..., check the Device Manager for this webcam and found he said one! status, with the following error code:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (code 19).

  Tried the following, but nothing works:

  1 uninstall and reinstall using the new driver from Logitech.

  2. Uninstall and reinstall in safe mode.

  3. Uninstall and reinstall using the generic driver

  How can I get rid of this error code 19?

  Thank you

  In this issue fixed. Used regedit folder specific location and delete the LowerFilters entry, exit and it will get rid of the error code 19 from Device Manager, not even require a restart.

• I installed a logitech webcam, and everytime I go to use it with windows messenger it stops and says that there is a problem

  I installed a logitech webcam on my computer and everytime I go to use it on windows messenger, MSN messenger stops and also I'm unaable to use yahoo messenger.

  Hi LindaKeippel,

  1. what operating system do you use?
  2. what happens when you try to use yahoo messenger?

  Method 1
  I suggest that you set the computer to the boot and try to use the Messenger. The following link will help you configure the computer to boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Put the computer into normal mode.
  A. Click Start, right-click computer and then click on manage.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  B. in the console tree, click Services and Applications and then click Services.

  (C) in the part of details, right click of Windows Installer and then click Start.

  Method 2
  If the steps above fail, I suggest you to reinstall the drivers from the manufacturers Web site, the following link will help you to reinstall the drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3
  Once you reinstall the drivers, I suggest you run the windows updates again.
  
  Install Windows updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• Impossible to uninstall Logitech Webcam Software

  I have Windows XP sp3, IE8 and all updates. Except 3 Logitech webcam C615 updates that all 3 failed to install with the same error code 0 x 80070103.  I have installed and uninstalled my software of Logitech C615, drivers and all a few times, hoping to redo the programwork. The program worked the first time I added it perfectly for almost a week, then without my knowledge at the time I had 3 virus severe threat (which I've taken care of via MSE) a week or so later when I discovered it. I don't know if this is related, but the screen would go black and dead when we tried to use the webcam, it does simply not at all. It's weird that on the same day I've updated these 3 updates failed was the day that I got the virus. So, I uninstalled the program overall, thinking the problem was the webcam and re-installed. It's the same thing, and Yes, the drivers were very good. I had yet to understand and fix the virus. So, I uninstalled it again. Still it wouldn't work. Then, viruses have been found and fixed. Now, here is my current problem. I'm trying to uninstall the Logitech Webcam Software C615 Ain Add/Remove Programs, and it will not uninstall! I '; worm tried and tried. Whenever a screen that is supposed to appear and ask you what parts you want to uninstall tries to ride, flashes briefly and then disappears, leaving me unable to uninstall. I tried the fix from Microsoft, but it without success. All parts of the program that I finally tried to do an unintall advanced disappeared (I think) except the software part. Help! Thank you!            KinaPO

  Hello

  1. What is the full message of error/popup?

  2 have what Microsoft Fixit you tried to solve the problem?

  3 What problem confined to a specific program? You are able to uninstall other programs?

  Looks like some third-party programs is blocking. This can also occur if the computer is still infected with a virus.

  Method 1:

  I suggest to run the Fixit and try to uninstall the program manually.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  If you have already tried, you can proceed to the next method.

  Method 2:
  

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Method 3:

  Run a scan antivirus on your computer.

  www.Microsoft.com/Security/Scanner

   
  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
   

  If the problem persists, you can report the issue in the Logitech forums for more information:

  http://forums.Logitech.com/T5/webcams/BD-p/quickcam_software

  Hope this information helps.

• Logitech Webcam preview window

  Is there a live preview for webcam captures using Remote Scan on a server terminal server. My end-users are swearing up and down that they had a glimpse of lining up patients from a webcam capture in their EMR software. Remote scan is the capture of the image on a Logitech Webcam c210 using the Remote Scan Microsoft WDM driver. The Preview button is just take a picture not a live stream.

  Until the user logs from Server RemoteScan RemoteScan customer using the virtual channel it will be a live stream preview. If the direct connection via IP, there is no flow.

  If you have any questions please contact us at 406-721-0276.

• I have windows 7 ultimate, my logitech webcam c110 does not have detected his help please

  the webcam is found in devices and printers when I run the troubleshooter it says that hardware changes might not have been detected in the webcam is detected in the official website of logitech

  Hello

  1. don't you make changes on the computer before the show?
  2. have you installed the drivers for the webcam from the CD or after they download from the Web site?

  Method 1:
  Run the fix it and check.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:
  You can check the link for Logitech and check if the download and installation of the drivers help you-
  http://Logitech-en-AMR.custhelp.com/app/answers/detail/A_ID/24408/~/downloading-the-latest-software-for-the-Logitech-Webcam-C110

  If the problem persists I suggest you try to download and install the drivers for Windows Vista compatibility mode to Vista in Windows 7 for the webcam and check-
  You can check the link for assistance on compatibility mode - mentioned below
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Reference link:
  http://www.Logitech.com/en-us/support/webcams/webcam-C110

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• No sound from my Mac, all THE

  Hello

  Earlier today, I connect my Mac to listen to the music and the sound no longer works. I checked the system preferences and went to the sound option. I looked out, and the only thing available was my apple tv.

  As you can see, the mute box he checked and gray. I been to countless forums telling me that the red light in the headphone needs to be reset for the internal to appear again speaker. Well... There is no red light at first. I tried to reset the thing of LANDAU and he just a gray screen as a thing that is like the terminal because you can do almost anything on the mac from there. I didn't know where to go from there, because the only thing that told the forum is to listen to the startup sound and a few buttons. I don't hear the startup sound at all.

  I don't want to go antics with all that because I don't want to mess up anything else.

  While writing that gave me access to reuse my Soundbar and the volume changer, but the internal speakers still do not appear, and the mute button is still gray and ticked off. No sound from the computer. No matter what. I'll try to reset once more.

  -Kay

  Hi Kay, try this:

  1. Plug your headphones.
  2. Play sounds through them, then stop the track.
  3. Go to System Preferences > Sound
  4. Set on headphones, then remove the headphones.5
  5. Who should provide "internal speakers".

• make a clicking sound from inside my Mac

  Just started today. Every few minutes I get a clicking sound from inside my iMac. It seems to work ok, however. Thought, it may be overheating and cleaned by vacuuming all the vents, but it did not help.

  Perhaps an early indication of a hard drive failing. Support everything up immediately (if you have not already) and get it checked with a free diagnosis in an Apple Center.

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• Laptop: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  The first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Try to connect headphones or a pair of external speakers
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager
  • Reset your laptop

  These solutions and much more are explained in detail in this document: laptops HP - no noise or distortion of the sound from the speakers.

• Desktop PC: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  Have you tried a few different devices (headphones/speakers)? There could be a problem with the hardware with one of these devices. Also, keep in mind that most of the computers do not have built-in speakers, you don't need to have a connected device to hear anything.

  If you have already tried a few different pairs of headphones and speakers, the first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Make sure that your device is connected to the appropriate port on the computer, and if you use powered make speakers you they are plugged into a working outlet
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager

  These solutions and much more are explained in detail in this document: HP-no sound from the computer desktop.