No sound from the computer and microsoft is not picking up any 'problem'... need help

Similar Questions

• No sound from the computer at startup - "speakers" not plugged in

  original title: no sound, does not not on start up. Troubleshooting says that not plug it in my speakers. Plugged on input 1 then on computer.

  I have speakers external yamaha and has always worked well until my daughter not connected the wire that connects into the hole of the speaker on computer.  She had no problem to use it on Ipod, but when I plugged the cable into the hole of the speaker (purple hole) on the computer without the audio sound at all not even start. Troubleshooting says my speaker wire is not connected.  I have Windows 7 - home premium, Intel Core i3, 4 GB of Ram memory.

  Sounds running system reads this device speaker not hung. I disconnected handed several times & put them in different holes on the computer. PLEASE, IF ANYONE COULD HELP, I WOULD BE SO GRATEFUL TO YOU! THANK YOU IN ADVANCE!

  Hello

  Were there any changes made to the computer before the show?

  Please follow the steps in the link.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Reference link:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Separated from this thread.

  Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

  Hello

  You cannot copy the drivers installed anyway.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  See you soon.

• No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

  I have vista SP2, I connected to generic stereo speakers using the green light at the back of the computer. Vista does not recognize the speakers. The speaker symbol at the bottom right shows "digital (HDMI) 2 high definition output audio device." It shows active. I had this problem before, and VISTA should pick up 'speakers' something to that effect. I have no sound until it captures "speakers". I can't get VISTA to recognize this. It keeps starting with the digital audio device. Don't know what to do, checked all the forums. It should just pick up these simple generic markets good speakers. Before SP2, I lose sound when VISTA is in standby mode. He would then turn off the stereo speaker and replace the digital output device driver... However since SP2 I can't get VISTA to recognize that I have just connected speakers and not a digital output device.

  Yes, when I uninstalled the driver, THEN shut down the computer and then restarted, he picked up the device high definition audio "speakers" good pilot is NOT the

  "digital (HDMI) 2 high definition audio output device that he used to pick up."

  I now have sound!

  I hope that it stores the right driver now as in the past, when VISTA went into sleep mode, it will disable the speakers, and you have to restart every time.

  Thanks for your help.

  You can add instructions to boumediene, the fact that you must RESTART your computer to search for new drivers, once you uninstall.

• I took the hard drive from the computer and formatted. I plugged it in and it tells me that I need an installation CD.

  * Original title: installation

  I got my a school computer and the computer was still saying he was trying to connect to the school network. I have a TI and computer repair class so I took the hard drive from the computer and formatted I connected again and he told me that I need an installation CD what I do.

  Using an installation DVD / USB drive and install the operating system...

  If you have formatted the drive, erase you everything on it.

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• Bought two of the iTouch, one for my wife and one for me. In the Notes his has the "" symbol for the formatting and mine does not work. Any suggestions?

  I bought the iTouch two at a time, one for my wife and one for me. In the application 'Notes' my wife shows the symbol "+" to the formatting and mine does not work. Any suggestion.

  Could you please include screenshots of the so-called issue?

• I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to ac

  I had to reinstall all my programs and data to a new disk, the old crashed. During the installation of Flash Player, I can't go any further than the password stage as he rejects. Again the username and password have been accepted without any problem to access Adobe.

  Strangely the same problem occurs when I try to install and older version of Lightroom 4.

  Can you help me?

  Hello

  It is the OS, not Flash drive, to ask for the password.  Please refer to the FAQ what userid & password I need to install Flash Player? for assistance.

  --

  Maria

• My product activation code is now missing from the computer and I recently received a message that my computer is not running genuine Windows.

  I recently received a message that my computer is not running genuine Windows. The product activation code is now missing from the computer. I had the computer for two years and I'm a product of the case but no way Code to enter as there is no "Acivate Windows option available". In addition, just slui.exe tells me that he didn't and to communicate with the gateway manufacturer. Any suggestions?

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Validation caching Code online: n/a, hr = 0xc0000022
  Windows product key: *-* - WJ2H8 - R6B6D-7QJB7
  The Windows Product Key hash: ckKNc + BBPDWmo1LUlOkraNjlQ34 =
  Windows product ID: 00359-OEM-8992687-00006
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {131481F2-8F22-45C4-AB3C-790AED5B7081} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.110622 - 1506
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Users\Kevin\AppData\Local\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {131481F2-8F22-45C4-AB3C-790AED5B7081}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-7QJB700359-OEM-8992687-000062S-1-5-21-619933626-1398643452-1551818003GatewaySX2851American Megatrends Inc.. P01-A0 20101116000000.000000 + 000CCB23507018400FC04090409Eastern Standard Time(GMT-05:00)03ACRSYSACRPRDCT100100Microsoft Office Enterprise 200712ywReFrpiwGS5KjJd3wYnxyLIKEE =89388-707-4551751-6501614 3CD066791E2A586

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0 x 80070426' to display the error text. "
  Error: 0x80070426

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0 x 0001000000000000
  Event timestamp: 9:25:2011 15:31
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered Service: sppsvc

  --> HWID data
  Current HWID hash: MAAAAAEAAQABAAIAAAABAAAAAwABAAEA6GFEEqg3RLFazIA5mCewUIycXq0YOVxd

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC ACRSYS APIC1334
  FACP ACRSYS FACP1334
  HPET ACRSYS OEMHPET
  MCFG ACRSYS OEMMCFG
  SLIC ACRSYS ACRPRDCT
  LASRYVITRAGE ACRSYS OEMB1334
  GSCI ACRSYS GMCHSCI
  AWMI ACRSYS OEMB1334
  SSDT DpgPmm CpuPm

  Noel,.

  Thank you I enjoyed your attention and your support.

  I called and Microsoft went through basically the same things that you suggested.

  We did a system restore (at an earlier date) and fortunately he fixed itrself. I'm good to go.

  Who knows why it happened.

  Kevin

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• No sound from the computer Windows XP

  Original title: reinstall his intergalactic max rated diglital

  I think that I remove my interqrated max sound on my computer and now I can't hear and sound

  What is the brand and model of your computer? Follow the tips in the link to see if it solves your problem.

  http://www.ehow.com/how_4691593_reinstall-Soundmax-back-Windows-XP.html

  I hope this helps.

• my cd/dvd is more listed on the computer and it will not play anything

  If I'm going to start the computer and then open cd/dvd is more listed also is absent from the menu equipment. I'm not a COMPUTER guru to take it easy with the answers. Thank you

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Computer is picking up other sounds from the House and play?

  I don't know how it happened, and it isn't my computer that is involved. A friend asked me this worried about someone is snooping on it. Every time a phone call is made, either incoming or outgoing on the landline phone you can hear it through the computer in another room. I don't know if I should mention that the rooms are at the two ends of the House. The computer is not running dial-up. Does anyone know how this could be possible. The sound is clear and you will hear a tone and everything.

  Hello

  ·        Is your friend by chance using a cordless phone?

  Possible causes could be wireless phone interference because the frequency is similar to that of a wireless modem/router.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• There is no sound from the computer

  Original title: his record game

  I'm not all the sounds of my desktop DELL running Windows 7 pc. I checked the sound card and peripheral works properly, apparently, but despite the speakers connected via line in I keep said there are no connected speakers. I also tried to use a microphone and have used the correct plug point but once again I am told that he is no legacy is connected. Help?

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  Perform the steps from the link below and see if the sound is restored to the computer.

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Answer please if you have any questions.

• Suddenly no sounds from the computer

  Separated from this thread.

  This did not help.  Device shows active sound to midway up, micro bottom-right halfway up.  No sound, none comes. Turned on computer.  No help.  The need for a solution.

  Hello

  Welcome to the Microsoft community.

  What operating system is installed on the computer?

  Have you tried the suggestions of SpiritX MS MVP of the next thread?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/suddenly-no-sound-coming-out-of-computer/6cf9d9b9-b7f4-4B97-A559-544f1587abd8?page=1

  Kind regards