No sound from the computer with connected generic speakers VISTA SP2. Symbol pregnant shows active with the Digital Audio device.

Similar Questions

• 550-215na Pavilion: no sound from the rear audio input jack

  Hello

  I recently bought a new PC and I immediately ran into an audio problem that I can't understand. I get no sound at all from the rear audio input jack. I'm getting sound before making, and the plug rear mic works. When I plug something into the rear socket, a message appears grateful that there is something. When I checked the sound settings while it is plugged into the rear outlet, the equalizer is moving, which indicates that he gets his. But nothing comes out when I plug headphones or speakers in. I can exclude a fault with the speakers and the headphones, because they work very well to come forward. All the drivers are up to date.

  Any help would be greatly appreciated!

  Hi there @PrimoFigs,

  I hope you find your experience of positive Support Forum! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that you get no sound from your speakers when connected to the rear audio ports. I'm happy to give you a helping hand with this.

  Have you tried to connect another device to this port, whether it of a different set of speakers or earphones, headphones just to test if one of them works?

  What it is connected to the front port at the same time? If so, then disconnect this device and try again the rear port and let me know if there is a change.

  Also try this: desktop HP-no sound on speakers (Windows 8).

  Please let me know if any of the work of tip for you suggestions and if we don't solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• I can not all the sounds from my computer

  I can not all the sounds from my computer. I hae tried to click place volume icon in the taskbar, but it won't let me and she also come with 'there is no active mixer device. To install mixer devices, go to control panel, click Printers and other hardware, and then click hardware, but it's not it will fade. Please can someone help me.

  The sndvol32.exe file is possibly corrupt.

  To replace, there are two methods:

  (1) open the Windows Explorer > tools > Options > view > make sure that show hidden files and folders is NOT checked. Access the c:\windows\system32\dllcache and locate sndvol32.exe > copy it into the following folder c:\windows\system32, overwrite the existing file. > Re-boot, you should now have access to your sound mixer and be able to place the icon on the taskbar. If for any reason any you do not find the dllcache folder:

  (2) put your XP CD in a driver, don't let it start. Then: Start > run > type in msconfig > enter or OK > extract a file > 1st enter in sndvol32.exe > in the second point of the box to your CD player > 3rd enter in c:\windows\system32 > extract file > run over if necessary, close everything and restart.

  If the above does not work, re - install you 'audio drivers, although I would only do it as a last ditch measure.

  See you soon,.

  Jerry

• HP Wireless TV doesn't Connect - no sound from the TV

  HP G60 - 235DX notebook PC with Windows Vista.

  HP Wireless TV Connect WY555AA #ABC model

  Connected to the HDMI port - 2 on a Samsung HD 52 '' TV

  The video is great, but no sound from the TV speakers. Sound plays on the mobile speakeres.

  I checked the Device Manager on the laptop and the drivers are up to date and there are no conflicts.

  Help, please.

  Thank you

  Hello Larry,.

  Please take a look at this document, which provides troubleshooting steps that should help you resolve your problem of 'no sound', connecting your laptop to your Samsung TV via an HDMI cable.

  Please let me know if it helps to solve your problem.

  Good luck!

• No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

  I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

  Hello

  Make sure that it has the TV volume.

  You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

  Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

  Reference:

  Windows 8 audio via hdmi on desktop cable

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

  Hope this information helps. Response with status so that we can help you.

• I want to move my hard drive from a computer with a motherboard dead to a newer machine. The activation process for Windows XP SP3 failed.

  I want to move my hard drive from a computer with a motherboard dead to a newer machine.  The activation process failed.  How can I get the operating system XP Professional sp3 reactive?  I have the code original and other info.

  original title: Moving the death machine drive

  Hello CarrolScott,

  The activation problem arose because the hardware on your current computer does not match that of the hardware on the machine whose mother is dead.

  The best option for the reactivation is to use the telephone line. This, unfortunately, is automated and may refuse to turn on your system; However, don't despair just rest on the line after the automated atcivation crossed its procedure and you will be transferred to a real person. Tell this person you've done, and it should be able to help activate.

  See this link from my Web site: http://vistasupport.mvps.org/product_key_already_in_use.htm

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Laptop: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  The first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Try to connect headphones or a pair of external speakers
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager
  • Reset your laptop

  These solutions and much more are explained in detail in this document: laptops HP - no noise or distortion of the sound from the speakers.

• Desktop PC: cannot hear any sound from my computer

  My sound does not work in Windows 10. No sound at all from YouTube videos, music and media players, Windows system sounds, etc.

  Have you tried a few different devices (headphones/speakers)? There could be a problem with the hardware with one of these devices. Also, keep in mind that most of the computers do not have built-in speakers, you don't need to have a connected device to hear anything.

  If you have already tried a few different pairs of headphones and speakers, the first step in troubleshooting I recommend is the easiest: restart your computer. Sometimes a single application can take control of your audio device and do not let all the other apps use, but you can release this control by restarting.

  Here are a few others not you can try:

  • Run the audio troubleshooting tool in Windows
  • Make sure that your device is connected to the appropriate port on the computer, and if you use powered make speakers you they are plugged into a working outlet
  • Set the default audio device to make sure that your computer sends the audio output of the device
  • If your computer comes with 10 Windows installed, you can restore the driver of its origin in the HP Recovery Manager, or to update the driver through Device Manager
  • If you upgraded your computer to Windows 10, you can update the audio driver in Device Manager

  These solutions and much more are explained in detail in this document: HP-no sound from the computer desktop.

• Cannot hear any sound from my computer

  i can't hearno sound from my computer, Ive check all the wires and the computer says that the speakers are working properly. But I don't hear anything.

  Moved from feedback

  Original title: audio problems

  i can't hearno sound from my computer, Ive check all the wires and the computer says that the speakers are working properly. But I don't hear anything.

  Moved from feedback

  Original title: audio problems

  i can't hearno sound from my computer, Ive check all the wires and the computer says that the speakers are working properly. But I don't hear anything.

  Moved from feedback

  Original title: audio problems

  (1) did you follow troubleshooting http://windows.microsoft.com/en-us/windows/no-sound-help#no-sound=windows-8&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1 hardware

  follow these three steps in the above article

  Step 1: Control material
  Step 2: Use a troubleshooting tool
  Step 3: Update drivers

  Come back with the results...

• No sound from the right speaker / can not configure the speakers

  Hi all

  I have a new computer Sony laptop and just tried plugging in my speakers 2.1 computer inside.  Sound only comes out of the left satellite and a subwoofer.  When I try to set them up in the sound control panel, the installation of the single speaker on the speaker Assistant is stereo and only the first test tone (left) plays from the satellite on the left, then silence (no dial tone test on the right).

  Everything works fine on the built-in Laptop speakers, but they are for computer speakers, so I wish I could use my old speakers when I'm at my desk.

  Sony Vaio and Windows Update Update did not recommend all new drivers for the audio controller.  I downloaded and installed the latest driver on the site from Realtek but that didn't work at all so I rolled it back to the version provided with the system.

  Work fine with my laptop speakers older and my cell phone, so the fault is not with the right satellite is.

  Thank you
  Drew

  Hi Drew,

  Thanks for posting your query in the Microsoft Community. There is no sound from the right speaker in accordance with the description of the problem.

  ·         Did you do changes on the laptop before the show?

  I suggest you follow the steps in the article.

  Tips for solving common audio problems

  You can see these articles for more information:

  Sound cards: frequently asked questions

  No sound in Windows

  I hope this helps. Let us know if you need more assistance.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.

• I have no sound from the external speaker

  I connected this morning my iPod in my car, as always. But today I got the only sound from the internal speaker and no sound from the external speaker in the car. So far I have never had problems.

  How did the car system connected to the car?

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area