No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

Similar Questions

• I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  I have my Dell XPS HDMI cable to my Sony Bravia TV / I get the image on the TV but the sound from the laptop

  Thank you.  I had to go to the sounds and have speakers/headphones to HDMI it didn't work at first but founmd you need to have the TV and the computer.

• I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

  Hi all

  I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

  Thank you

  Sally

  See if there is a solution:

  https://support.Apple.com/en-us/HT201834

  Ciao.

• No sound from the laptop to the TV with HDMI connection

  Reference Dell Laptop windows 7 connected to the Samsung 46 '' smart TV with an HDMI cable.  Video works great but no sound on TV.  Is there a setting somewhere that will cause the audio to work from the laptop to the TV via the HDMI cable?

  Right click on the sound icon in the system tray, select playback devices and output of the default value.

  You will need to install an audio HDMI driver for your graphics card if the HDMI output is not displayed...

• No sound from computer to tv via HDMI cable

  I have a hp probook 4710 s, I have recently cleaned my computer wiping windows vista and download of windows 7 for my computer.  Before I did my hdmi cable that I used for the tv worked, and now that I have reset everything on my computer I can not get my TV to recognize sound through the hdmi cord, even if the image is their.  What should I do?  My laptop has his and my tv has sound when it is not connected to my computer but the second he plug the tv noise disappears and all the sound out of my computer speakers.  I changed all the settings in the sounds and audio devices, and nothing has worked.  any suggestions

  Hello:

  In the section of sound from the Control Panel, when you click on manage Audio devices, you see two choices?

  You should.  You should see your integrated audio system (Soundmax) and your HDMI (which should be your AMD HD Audio device).

  You must have this current option in order to have your HDMI audio to work.

  If it is not present, I recommend you to only visit the Web of AMD site to download and install the latest drivers and the catalyst control center. This package should include the HDMI audio.

  Use the drop down menu to choose the drivers you need:

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  Paul

• I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

  I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

  Hello

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  a. click on the button 'start '.

  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• I'll have to keep the sound from the laptop to the tv

  I have an emerson tv and a laptop gateway I plugged the hdmi cable it worked a couple of times, but when I tried again, there was no sound on tv

  Right-click on the icon - speaker, click playback devices and hdmi as a default value.

• No sound from the laptop, unless I have plug in headphones

  It started today, actually. I did everything.

  Disabled/Re-the pilot's license, check the errors, troubleshooted, etc etc. Literally all of the measures to solve this problem has not worked.

  Hello

  What is the brand and the model number of the laptop?

  Method 1:

  Also check if the laptop speakers are set by default in the sound playback

  (a) go to control panel

  (b) select the hardware and sounds

  (c) click on manage audio devices on the sounds tab

  (d) go to the playback tab and check if the portable speakers are the default.

  Method 2:

  I suggest you run the Microsoft fixit tool and check.

  Diagnose and automatically repair audio playback problems

  http://support.Microsoft.com/mats/AudioPlayback/

  Method 3:

  I also suggest you to see the links and check.

  Tips for solving common audio problems

  http://Windows.Microsoft.com/is-is/Windows7/tips-for-fixing-common-sound-problems

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• The display is inconsistent when I use a hdmi cable to connect my laptop to my tv

  I have a HP Pavillion laptop with an HDMI port.  Recently, when I connect my lappy to my TV Sharp display on my tv is only the lowest possible resolution and not in widescreen.  He comes to work correctly with a very high level of HD but connection only recently started to do this.  How do I return to watching high-resolution video on my tv?

  Hello

  -Have there been any changes made on the computer before the show?

  Perform these steps and check if that helps.

  Step 1: I suggest you to update the display drivers.

  Update a hardware driver that is not working properly http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Step 2: Once this is done, go to the display settings and change the screen resolution to the highest value that takes care of your TV and check.

  Change the screen resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-the-best-display-on-your-monitor

  Hope this information is useful.

• Notebook Compaq CQ50 - 107NR PC-not to sound of the laptop without headphones

  No sound from the laptop without headphones... help?

  Until today, I was perfectly able to hear the sound in my Compaq CQ50-107NR notebook PC with or without headphones plugged. I have not upgraded or anything and I don't know how to fix it. It shows everything works well, but is not. Any help would be greatly appreciated.

  Hi rajiv puri,.
   
  Because that did not fix the issue, I suggest delete and then install the sound card and check.
   
  Here is a link to
  http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-card
  It may also be that the sound card may be disabled in the BIOS, probably only the edge can work.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.] [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• No sound from the tv with hdmi w3 connection

  I have a standard micro HDMI to connect my w3 to tv.  When a movie plays on the w3, I can see the video on the Tablet and the tv, but only the Tablet has its.  Is this normal?   I checked that the tv properly with other hdmi sources works but have no way to test the brand new microphone cable or w3 drivers.

  I was unable to locate a compatible driver on intel.com.

  However, I tried the w3 with a different TV and everything worked as expected: even with only a 'driver' Intel ESS Audio Device (WDM) available.  Passage of the tablet on television was automatic.  I did plug in and turn on the tablet in front of the TV and everything worked.

  I tried the same procedure with the original tv and the results were good video but no sound from the TV.  The sound remained with the tablet.

  I hae 2 TVs and 2 blueray players.  I swapped every combination of TV and player and everything works well.  Since the Tablet works well with at least one TV, the hdmi cable is ok.  My conclusion is that the current configuration of the Tablet works with some TVs and others not, and until I can find a better driver I'll just have to live with it.  I wanted to be able to watch videos with the Tablet when I traveled and will just have to wait until I get whenever I go to see if it works.  Not very desirable but it's like that.

  Thanks for your suggestions and help.

  Problem solved (sorta).

• HP Compaq DC7800 SFF - no sound from the HP FX380 Video Card connector

  The above machine was working perfectly until I installed a HP FX380 graphics card.

  I wanted to improve graphics performance as it was slow when you use Adobe Photoshop and did not support OpenGL. The resolution of my screen (1920 x 1200) also seems to challenge the on-board graphics chip.

  I bought a HP NVIDIA Quadro FX380 thought (512 MB) graphics card that using a card in a HP computer HP has been a guarantee of success, but it was not to be!

  The FX380 mounting was easy, but there is only one in the DC 7800 PCI-Express slot, so I had to remove the original graphic adapter (a double buffer x 16 Silicon Image AD02-N card). As far as I see it, there is no audio on this map.

  When I rebooted the new graphics card was correctly recognized, and I was able to install the video drivers with no problems. Graphics performance has also been greatly improved, while the memory system is out, and I activated the OpenGL support in Photoshop. So far so good!

  However, I got an error message saying the SounMax (audio drivers) should be reinstalled, and there is no sound other than the default system beep.

  I tried to reinstall the software SoundMax from various sources, including the recovery partition, but I always get the message "that the audio driver files do support not your hardware.

  The search in Windows XP Device Manager and selecting sound, video and game controllers, audio only I see are several pilots 'NVIDIA High Definition Audio. There is no yellow asterisk.

  I spent several hours online agent HP cat, uninstalling and reinstalling the drivers. I even have the officer to take control of the machine for a while, but still have no sound! I also updated the BIOS OF THE v 1.28 system.

  The obvious answer seems to be that I do not have the correct sound card drivers, but nobody knows what they should be. I don't even know if I have a sound card, not more, or if the NVIDIA card has taken up somehow the system sound card?

  Anyone know if there is a problem using the HP FX380 map in the DC 7800 SFF, or am I missing something somewhere?

  Would it not possible/useful to adapt to a sound card in the PCI vacnt slot? If so, any reccomendations?

  Any advice welcome.

  NN

  Hello:

  I can say that your new video card has an HDMI output port because of the new nVidia HD audio, which now takes the place of your integrated audio system. This is why you have no sound (unless you hold on to a TV or something).

  In any case, the solution is simple (I hope).  As you know the dc7800 is a professional PC intended for use as a home theater and at the time of its manufacture, that there is no video input with HDMI output are supported in these offices of class business.

  I hope that when you installed this new HDMI video card, a new audio BIOS setting appeared in your system configuration in the Advanced menu.

  So please go and see if there is an audio setting boarded, that you can change auto to "Enabled". In the affirmative. Press the F10 key there and at the exit of the BIOS, save settings and exit.

  That should allow both audio devices to operate independently.  You've got audio when HDMI cable is not plugged into a TV and you have HDMI audio when HDMI cable is connected to a TV.

  Please let me know if this is the case.

  Paul

• How to make sound to play through my headphones and not my TV when you use an HDMI cable to extend my desktop?

  Often, I connect my laptop to my TV to extend my desktop and find work more quickly. Today, I wanted to listen to music then I worked, but did not want to disturb others in the House with the sound so I plugged my headphones on my laptop but the sound plays through television. How can I get it to play through my headphones only?

  I do not use HDMI but audio HDMI runs your graphics instead of the audio chip

  the laptop, so I think that you can turn off the HDMI audio in your graphics cards

  The control panel settings.

  -If not, you should be able to disable the HDMI audio via Device Manager.

  The HDMI audio will probably be known as your graphics (Nvidia, AMD or Intel).

  [Type Device Manager in the search bar on the Start Menu and select - sound, video and game controllers.] R / click on the appropriate audio device and select disable. ]

  Or - connect your headphones to the TV should turn off the sound from the speakers.

  You can purchase an extension for headphones, if necessary.

• iOS 10 no sound from the speaker of the ear or EarPods

  After update of iOS 10 (in 6 s iPhone and 5s) I have a problem then to make or receive calls. Most of the time it is no sound from the speaker of the ear or EarPods and I have to press the speaker during calls to listening. To get back what I have my iPhone and open it again. This seems to happen after that I used once the EarPods.

  Be aware that I have consume EarPods in 90% of my calls and iOS 9 I had no problem at all.

  Hello Billy78GR,

  Thank you for using communities of Apple Support. It is my understanding that you met the receiver and headphone audio problems after update to iOS 10. I know that it is extremely important to be able to hear others during calls. I'm happy to help you to get this resolved with you.

  First of all, I recommend you restart. This can solve many unexpected behaviours. Follow the steps below to restart.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Restart your iPhone, iPad or iPod touch

  As you use the headphones on most of your calls, I recommend checking and removal of dust or debris from the helmet. If the problem persists, please refer to the additional steps in the link below.
  If you do not hear a person, a call or a voice message or if the sound is not clear on your iPhone

  Have a great day!

• New iPhone SE no sound from the speaker of the brand

  I just bought a new iPhone SE and I'm getting no sound from the speaker. Does anyone have any ideas on a possible resolution?

  I restored from an iPhone 5 to the top, both phones are on the latest version of iOS.

  Once the synchronization is complete, I ejected the phone correctly. But there is no sound coming from the speaker:

  • Key "secret" in both positions, no sound from the speaker
  • The top volume, using the volume buttons and the sound, no sound from the speaker settings
  • Headset plugged in, sound comes from the helmet, remove them, the iPhone recognizes, but still no sound
  • I tried the music app, ringtone from another phone, videos, podcast app, no sound from the speaker
  • Past the phone power off & on again, no sound speaker
  • Reset iPhone (hold both buttons down for 10 seconds), no speaker sound
  • Reset iPhone settings, no speaker sound

  I begin to suspect it is a hardware problem, but as I am not near the Apple Store, I would try as much as I can before you go this route.

  Thank you

  Hello Andy,

  Thank you for using communities of Apple Support.

  I understand that you have restored your iPhone backup iPhone a precedent, and now there is no sound from the speaker.  Given the troubleshooting you have already done your next step is to restore the factory settings to see if the problem persists:

  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  If the problem persists, then please make an appointment with the Apple Store is close.

  http://www.Apple.com/retail/Geniusbar/

  Take care.