No sound on Asus Xonar DS (card high school) after waking from sleep/hibernate. Restarting doesn't help not.

Similar Questions

• Satellite A210-15J - no sound after waking from sleep in Vista mode

  Satellite A210-15J, RAM 2x2gb, BIOS v1.70, Vista Ultimate x 64 SP1 (with all hotfixes), driver audio Realtek v.2.01.

  After the Windows Vista recovery, high-definition audio (HDA) device is not working properly. There is no sound, only noise.

  This FAQ from Toshiba document may help you:

  [High definition audio device may no longer work after resume Windows Vista from hibernation or standby | http://aps2.toshiba-tro.de/kb0/TSB7601WX0004R01.htm]

  _The solution is simply: _
  You must download and install the fix from Microsoft site 937077.

  See you soon

• G60-458dx Wireless card is disabled after waking up from his sleep.

  I have a g60-458dx which is less than a year. My wireless card is disabled when I wake the computer from sleep mode and takes me a few minutes fiddling with the wireless, near the power button button to operate.

  I have installed and reinstalled all the drivers, set the power settings and my laptop power mode, but nothing seems to work.

  Any help would be greatly appreciated.

  Well I think I have fixed the problem. HP wireless Assistant fixed somehow. I'm seriously confused but I've never had to install in the past.

  I spent between ubuntu and windows 7 a few good times, and the problem began after about 2 weeks of my second installed ubuntu. I have no idea why, on the eve of the card network wireless became a hard block and I couldn't understand why.

• My Apple TV Remote no longer meets the high command. Change the battery and restarting did to help. Anyone have any ideas?

  How can I fix an Apple TV Remote that has stopped responding to the command "up"? It works otherwise, but do not be able to scroll to the top is awkward. I tried to change the battery and restart.

  Money or Siri remote? How old is it? He fell on a hard surface?

  TT2

• HP mini5102 interruption using high CPU after sleep / resume

  I have the same problem described recently (without solution) on the Forum of Support HP Business. After resume from sleep, 5102 HPmini consumes constantly about 30% of the capacity of the CPU even with the system at idle. Sunny (0-3% CPU use at idle) before going to sleep. As Roderick Laird (copied below) I've already got rid of wireless assistant that caused a different problem of high CPU usage (100% CPU use even before you sleep / resume, now fixed by an update of the version unless served for those who want to keep the wireless assistant).

  Consumption of futile processor by 30% after standby/sleep is due to material interruptions (revealed by Sysinternals Process Explorer). I understand that may be due to problems such as several drivers attempting to control a device (for example, after a faulty update). But I have no idea how find the offending device or drivers.

  My guess is that many owners of this model simply did not notice the problem and they areassuming the poor performance is due to the atom processor netbook. You must use Task Manager or performance monitor to view CPU usage high, and process Explorer to find it hardware interrupts.

  If anyone has found the cause / solution?

  HP, help to resolve this issue please--nobody wants netbooks HP fall into the category "do not buy" due to persistent problems with the futile CPU usage. The HP mini 5102 is the flagship model!

  Ref:

  "Author subject: HP mini5102 interruption high CPU usage after standby Roderick Laird 24 March 2010 04:03:03 GMT - I see of other HP5102 users having problems with high use of the processor of the Wireless Wizard operation amok; I avoided this by disabling the corresponding services. But one problem remains. The system works beautifully/effectively from a cold start. However, if I go back I think that interruptions are consumes about 35% of the cycles CPU. Not something that I want to pass battery on. I made sure that all the drivers are the latest versions according to the HP support site. I also tried disabling the obvious drivers that might be wrong (wireless, ethernet, audio, non-touchpad mouse)... »

  Update the Intel AHCI 9.6.4.1002 driver (iastor.sys) removes the futile CPU usage after sleep from 30% to 20%. This is not in the drivers of HP, but is available at Intel. Subsequently the chipset driver updates might solve the problem. In the meantime:

  Disabling in BIOS Drivelock completely eliminates the problem!

  Apparently users who want a computer that is useful after sleep / summary to know somehow ignore the advice of stern of HP in the BIOS that Drivelock is recommended for safety.

  It cost a lot of time to resolve, with no whatesover help to be published by HP. My consolation is that by systematically eliminating all the bloatware and other services-waste of unused resources, pilots and scheduled tasks automatically loaded on the system (while trying to find the cause of the CPU / interrupt use) I now have a mini 5102 (SSD) that:

  * Cold boots Win 7 Pro 32 in less than 30 seconds (including wireless access)

  * Stops in less than 8 seconds

  * Beds / back in 1-2 seconds

  * Consumes less than 600 MB of RAM at idle

• Map its ASUS Xonar DGX and Adobe Premiere Pro.

  Hello!

  I bought an ASUS Xonar DGX soundcard. I'll work on audio especially with a good headset.

  What technical considerations should I consider if I want to advance and and edit audio in first and other Adobe programs?

  I read something on the Adobe system requirments and map its compatible with ASIO or Microsoft Windows Driver Model Protocol, but it was not very clear to me.

  There are people who say that the Asus drivers are not the best and they recommend using third-party for asus xonar dgx to get drivers for best results. But they will work with Adobe Premiere?

  How can I make sure that Adobe Premiere will make use of my sound card?

  (technical info here: http://dlcdnet.asus.com/pub/ASUS/Audio_Card/Xonar_DGX/E7798_Xonar_DGX.pdf )

  
  Onboard Audio Chipset Realtek ALC892

  (technical info here: http://www.hardwaresecrets.com/datasheets/ALC898_DataSheet_0.60.pdf )

  Occurs a dedicated audio card for best results that the Audio Chipset shipped?

  Thank you!

  Thanks ECBowen!
  I don't plan to record sound using my computer. I just want to have the best possible sound quality when editing video or audio. Be it creation or hearing. As far I knew Asio drivers are used to reduce the lantency when recording audio.

  I'll use anyway pilots Asio?

  Thank you

• Problem with the ASUS Xonar DGX

  So, first of all my problem is my sound is playing is no longer sound, and this started when I turned off my ASUS Xonar DGX Audio Device in Device Manager and reactivated it. I did this because whenever a game would break it would play a buzz and before today which can still fix this. I tried to restart my computer and do a boot minimum but before I did a clean boot, everytime my computer turned back, it says that windows could not find UpdateTool. I have ran virus scans with 3 different readers and not find anything, can someone help?

  I should also mention that in my sound mixer, is showing the green light that she is out of her, but I guess I don't get it.

  Hey,.

  Try the article provided to solve the problem.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Tips for solving common driver problems

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-fixing-common-driver-problems

• Please, please help. No sound from my sound card on board after installing windows 7

  I just installed windows 7 ultimate 64 bit on my computer that previously had windows xp professional sp3 top.  My motherboard, what I don't know, is an a32gv11c from ASUS with a team of a soundcard SoundMax.  I have absolutely no sound and can't seem to find the drivers for it anywhere.  Y at - there anyone out there that can help me to find the driver I need to get a sound?  Help, please.  Thank you.

  I know it's my advice, which means that the hardware manufacturer, who has done this.  The installation for the integrated sound card cd says that the current operating system is not supported, which to me makes sense because this material was released before windows 7.

  All documentation is in stock and not accessible.  I looked inside to the motherboard and can't seem to find any useful information pertaining to the brand of it...  I never spent by with any programs driver utility because my model did not appear.

  Issues that everyone seems to have is with no sound from sound card after installing windows 7, not just isolated to my sound card.  I have a hard time believing I am eternally screwed with no sound from my computer because of my hardware not supported under windows 7.  There must be a solution out there.  I realize that I should have found that now but can not which is what brought me to this forum.  Someone knows and can help me.

  You are not 'for always screwed"- you can always buy and install a sound card which the manufacturer supports their product under Windows 7 - operating system, you choose to run.  The trick is to have a piece taken in charge (by the manufacturer) hardware or software - * under the operating system you choose to run *.

  Yep - you've had this old Ford Mustang you bought this Nitro kit for... But now that you have this new Ford Mustang - Nitro kit may not work.

  Your only real solution: get a piece of hardware - audio device - supported under Windows 7 by its manufacturer.  Else do you play with fire, may or may not work and even if it does not, could be broken by the next patch or update.  If you have a PCI or PCIe available slot, find a cheap good sound card (trust me - the one you had would have qualified as cheap) and throw it in.  15 USD and up to I guess.

• Problems initializing digitizer card high speed

  I recently built a new computer for data acquisition.  I had all the questions according to a program for the acquisition of data for a digitizer high speed written in LabWindows 8.5 and it works successfully with LabWindows 9.0 on the new machine.  The only problem I encountered was name the digitizer card high speed max the appropriate name of the resource planned by the data acquisition program.  Everything went very well for 4 days.  Today, I try to run the same program and cannot enforce.  Debug code indicates that the device fails to initialize when niScope_init() is called.

  In MAX passes card scanner that can call a test and I have test panels and see an input signal.  I checked the name of the device to ensure that it matches the named resource that provides the program.  I also reset the device to the MAX and then tried to run the program.  None of these attempts succeeded.

  I can't really find anything that changed between the last time I ran the program and today.  Everybody to face this problem in the past, and is at - it solution or a proposed additional troubleshooting?

  This problem has been resolved by reinstalling the drivers for our digitizer high speed.  I have still no idea why after four days, something happened to the original driver installation.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• No sound with Asus M2V motherboard

  No installation of Windows 7 - no sound with Asus M2V motherboard - sound problems

  Hi, thanks for your time. Recently, I was running Windows XP 64 Bit when I bought Windows 7 Home Premium. Now, after installation smoothly, everything works except for my sound. How can I get his job? I've included details on my motherboard, processor and speaker system I have.

  Motherboard : Asus M2V
  RAM : 6 GB
  OS : Windows 7 Home Premium
  Speaker system : Altec Lansing ATP3
  64 bit

  It was working fine a few days ago on Windows XP, now after one its installtion does not do anything. (I heard the sound of my head game USB, but never my speakers set.)

  I'm a newbie, so please help me step by step. Thank you very much!

  Hello MAG40,

  Thank you for your message.  Please take a look at the thread HERE, it might help you with your problem.
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• CARD FIREWIRE FOR HIGH DEFINITION VIDEO TRANSFER FROM CAMCORDER TO PC

  I'm trying to transfer high definition 1080i video from my Sony camcorder to my desktop HP [HP Pavilion Elite e9160f desktop PC]. I need to know the appropriate method on the transfer. I have been informed that I need to have an internal firewire card installed in order for me to transfer video HD on my PC. Can you get it someone please let me know if this is correct and if yes is my PC/motherboard able to manipulate the internal firewire card and also the type of firewire card I need i.e. PCI/PCI Express, minimum or maximum speed I need to transfer video high definition without framing or gel, for example if it is to be a minimum of 400 MB/s. And tips and suggestions are appreciated.

  Windows 7 probably has the drivers for the card.  The latest firewire cards are included with the built-in drivers in Windows 7

• Camileo S10 - Arcsoft doesn't recognize not all files on SD card and internal memory

  I just bought a Camileo s10 camcoder.
  So far, I was pleased with the product until I connected it to my pc (vista compatible with recommendations).

  I installed the Arcsoft software, but I've never had any file import because * the program recognized the sd and internal memory as void * (I could read the files in the drive of the camera, as well as my pc card reader).

  I have used other similar suites with no luck. Then I tried to format sd hc 8 GB card and restore my files but unfortunately I noticed * video/foto files not recognized at the time, even from the camera *.

  Another concern is that I had a trailer (720 p) hd .mov file in my memory card and the camera could not see (+ I wanted to use the camcorder as a player HD plugged into my sony full hd tv +).

  I looked for answers almost anywhere, but so far I have had no response

  Hello nikfam,

  I also have a S10 Camielo, installed the software Arcsoft on Windows Vista and I am able to see images and mov files if I connect the cam via usb cable or if I insert the sd card into the card reader.
  He shows me the internal memory and the data stored on the card (Class6) 8 GB SDHC.

  Maybe you need a card with a higher class. Where did you try to format the sd card? On the inside of the camera or on your pc?
  Please take a look at the right format.

  Have you tried another usb port? If you use a hub, check that there is enough power.
  I downloaded both trailers 720 p and saved on my sd card but my S10 couldn t see too.

  welcome them

• What is the best for high school, iPad or MacBook?

  Hi guys, I just want to ask what would be better since I'm High School and I could have the intention if I could get a MacBook or just use my iPad air 2. I use my iPad to make presentations and a lot of things that can make a MacBook.

  If the air of the iPad 2 is enough for me, so I'm going to stay and use it. Unless the MacBook have more benefits.

  Most of what you need to do in school would involve probably navigation for tasks related to research, a tool of processing as the Pages of Apple or Microsoft Word software and of presentation creation like Apple Keynote or Microsoft Powerpoint. These are all the things the iPad can do quite easily. However, it really depends on your school and what courses you'll take. Try it using the iPad and if you feel this is not enough, then look into a MacBook.

• Can I use the money in my account to a gift card to pay for music from apple?

  Can I use the money in my account to a gift card to pay for music from apple?

  Yes.

  (140162)