No sound on computer, error: no device playback.

Similar Questions

• No sound on computer and convenience store said computer has no mixer device

  my willingness to computer has no sound

  Computer is no sound.when troubleshooting says my computer has no mixer devices

  It seems that you have not installed the drivers for the sound. Look in the Device Manager. There can be no? "s for the sound. If so, you should know what is the make and model of your computer.

  Go to download site of the manufacturer of the sound drivers, then install them

• Service error battery Bluetooth connection problem and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device ".

  Original title: Bluetooth connection problem

  I have a bluetooth Jawbone headset which worked fine with my Dell studio 1458 until a month or two ago. I am running windows Home premium 64-bit. Now the device will connect is more to the laptop. I get an error to the stack service and "Bluetooth Control: an error occurred during initialization of this operation." Try restarting your computer or bluetooth device"I returned to you can restore point, but the issue is not resolved. All solutions?

  Hi Trainfan1,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Run the tool and troubleshooting hardware devices.

  Method 2: Check the drivers and the Bluetooth Support service.

  (a) click Start, type services in start search box and press enter.

  (b) Services for window open find Bluetooth Support Service and double-click it.

  (c) ensure that the service is both the value Automatic for Startup type and started for the State.

  (d) click Start, type Device Manager in the start search box and press enter.

  (e) to search for the Bluetooth device expand it and double click on the driver.

  (f) go to the tab driver and click set to update driver to update the drivers.

  (g) if the problem is still even try to Uninstall and reinstall the drivers in the same tab by clicking on the option Uninstall .

  Method 3: Remove all Bluetooth components and reinstall it from the manufacturer's Web site.

  Install all necessary software required for Bluetooth device work properly.

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• ATAPI - event ID:11 - the pilot detected an error on \Device\Ide\IdePort0 controller.

  I'm getting following error in my event log Watcher:

  Log name: System
  Source: atapi
  Date: 2009-11-01 01:18:38
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: hendrim-PC
  Description:
  The driver has detected an error on \Device\Ide\IdePort0 controller.
  The event XML:
  
   
     
      11
      2
      0
      0 x 80000000000000
     
      53536
      System
      hendrim-PC
     
   
   
      \Device\Ide\IdePort0
      0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000
   
  

  Anyone any idea what is the cause?

  I replaced all the cables and hard drive but I get the same error (wasted money).

  When you start the PC and get "PIO MODE" in computer/manage/Device Manager / IDE ATAPI controllers ADA / ATA Chanel X/properties/Advanced is the cause, your PC is frozen.

  My "temporal" solution for this problem is:

  1 - Turn off the PC.

  2 - pick Up and the hard drive cable through the same port of the motherboard

  3. start the PC and the control in the advanced settings box-> "Ultra DMA Mode 6"; right now, you can work without problems.

  * If you can trade your motherboard (all under warranty) DO!

  -. - We are all waiting FOR you than get Microsoft a solution to force the departure to the top of "PIO MODE" to "ULTRA DMA 6"

• HP 4500 will print but not scan error message device not connected

  4500 impressions wireless fine from my computer.  When I try to configure the scanner it gives message error "the device is not connected to your PC.  I have everything turned off, unplugged the USB and even reinstalled the drivers.  What can I do else?  I have a PC with Vista 32 bit.  Please help me I need to analyze a job offer by e-mail.  Thank you

  I'm sorry you have a problem with the scan.

  Try to run the printer and scan doctor and check the results.

  http://support.HP.com/us-en/document/c03275041

  Let me know what happens.

• Cannot start, had to use safe mode. Event Viewer, event system properties, error "the device / Device / Harddisk:O / D, has a bad block.

  I use my desktop computer to post my question, my laptop has the error.  First, he appeared on the journal 09/12/2010.  Said event properties' Source: disc, it gives the date and time, category: no, Type: error event ID: 7, critics: n/a, computer: laptop, Description: device/Device / Harddisk:O, / D, has a bad block for more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp

  It has not helped me, does anyone have any suggestions?

  This means that the player has / is a failure and should be replaced.

  Your laptop may have preinstalled utilities test which can be consulted before starting, manufacturers mobile site would give information

• Windows crashes every 10 minutes for abt 30 sec / 2 min with «the pilot detected an error on \Device\Ide\IdePort0 controller»

  History/context: This problem started happening on my Dell Vostro 220, while he was new (May 09), on Windows Vista that it came preloaded with. I figured a SATA controller and a defective Dell replaced both my HD (& SATA cables) and Mobo. But ongoing problem - then Dell suggested to set access drive in AHCI mode in the BIOS. I did and in HD and installed also XP. Problem persisted. XP errors in the journal system came as '\Device\Ide' and '\Device\Hd0' sometimes sometimes. Reference Dell insists that it is a driver problem Windows. Since then, I still formatted hav clean and installed with Windows 7, what I use now. But the problem persisted.

  System:
  Dell Vostro 220 with Intel Core 2 Duo E7400 @ 2.8 Ghz, 4 GB of RAM (3 GB usable), running Windows 7 Professional 32 bit. 1 x DVD Writer TSST Corp TS - H653F ATA hard drive WDC WD2500AAJS - 75M0A0 ATA

  Symptoms:
  On bad days, it happens every 5-10 minutes; other times 30 min. Locks up system / freezes during 30 sec to 2 min during which I am able to move the mouse cursor, but do not click on anything anyone or do anything else. When Frost "thaws" if I check the Logs of error in the system log I still see the "EventID:11" error "Source: atapi ' 'driver has detected an error on \Device\Ide\IdePort0 controller. Sometimes (not always) I also see a spike in the graph of CPU use if I check right after the "thaw", but I was not able to determine what process as I am looking after the fact. Normally, there are 4 SATA Ports on the motherboard. 0.1 were used for HD, DVD. If I unhook the DVD drive altogether and connect the HD SATA cable to the port marked 2, I get the same errors, but "\Device\Ide\IdePort0" becomes "\Device\Ide\IDePort1".

  Other note (s): During the installation of the OS, Dell has a "Intel Matrix Storage" listed as critical on their site, but when I try to install it, it says "no compatible hardware not detected" and install exists.

  Also, interestingly, if I take the HD (in blue) to the total of SATA cable and try to connect SATA cable from the DVD recorder to the orange (originally) between individual ports Mobo and HD, I get a mobo error - flashing 3 light and "beep" as soon as I turn on. It disappears if I go back to blue SATA cable from the Hd for HD

  Hello

  As you have informed us that you are always faced with the question after installing Windows XP and Windows 7.

  I suspect that the problem is somewhere in the material or the SATA ports on the motherboard. I suggest you to contact the manufacturer of your computer for help, because they will be in a better position to help you.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows backup default - Eventvwr shows error on \Device\Ide\IdePort0 controller

  Hello

  I'm at my wits end. I got the error 0 x 81000037 when you run backups windows recently. I am backing up to an external USB drive.

  I went through the entire analysis point fix, I run scans antivirus complete and deleted all quarantines and I have now deleted all audio-visual products. I tried to back up selected folders, clean boots and I'm still not able to run a backup. However, I'm now not only this error code, but others.

  Looking at the event viewer, it seems that each backup error is preceded by 11 on atapi event: «the pilot detected an error on \Device\Ide\IdePort0 controller»

  I don't know what it is, but I wonder if this is what is at the origin of the problems, and if so, is this a problem with the external USB HARD drive or internal one.

  Can anyone help? I'm desperate to save my files.

  Hello

  You might face this question when the competent services for backup are not running, you can also face this question when the chipset drivers are corrupt. Make sure you don't have any other external device connected to your computer outside of the mouse and keyboard. I suggest you to make sure that the following services are running and set to automatic.

  Shadow copy volume

  • Windows backup service
  • Engine block of backup Service level
  • Windows event log
  • Task Scheduler
  • Click Start, click in the start, Search , type services.mscand then press enter and then check the benefits described above, one by one.
  • You can follow the steps in the link below and check if it helps you.
  • Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  • http://support.Microsoft.com/kb/973455

  You can also consult the steps proposed by Stephanie Podder dated 8 June 2013 , the link given below.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/event-ID-11-source-ATAPI-the-driver-detected-a/1c45a710-596f-468C-970D-74858d0a96b6

  Let us know if you need additional help from us.

• Sound recording play error message: disconnected from the audio jack and opens the Realtek HD audio Manager.

  Original title: his record game

  Recently, I built a new computer and its been connected via HDMI. Then one day that sounds simply stopped working, so I've updated my drivers that are digitally signed and still no idea. It is said that I unplugged the audio jack, and it evokes the strange Realtek HD audio Manager every time.

  The operating system is Windows 7 64 bit home edition. Does anyone know what I need to do to correct this little hiccup?

  Thanks for the help,

  Mac ~.

  IS TT 3TT)<>

  Hey Mac,

  You can try the following steps and check what is happening.

  Method 1:

  You can try to disconnect and reconnect the connection and check.

  Method 2:

  You can also try uninstalling and reinstalling the latest version of the sound card driver.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all packages to audio driver, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall

  d. restart the computer and check.

  You can also consult the manufacturer of the computer or the device manufacturer's Web site and install the latest version of the audio drivers.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Resource monitor error "the device, mscank, reports"tv_ConfigMgrErr24"

  I get the error "the device, mscank, reports"tv_ConfigMgrErr24".» This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000. "This error is reported when the resource i run and performance monitor on my laptop. My config laptop is Sony Vaio win7 Home premium 64-bit. Kindly give me solution nd more of information for this problem. Full details of this error is:

  Symptom:	Device is not present, not working not properly, or does not all its drivers installed.
  Cause:	A device has a configuration issue preventing it from working correctly.
  Details:	The device, mscank, reports "tv_ConfigMgrErr24". This device won't be available until the problem is resolved. The Plug and Play ID for this device is ROOT\LEGACY_MSCANK\0000.
  Resolution:	1. check that the correct driver is installed.
  	2. try updating the drivers using Windows Update.
  	3. check with the manufacturer for an updated driver.
  	4. try to uninstall and reinstall the device using Device Manager.

  Hi riteshwalia,

  Mscank is a file system driver that may be associated with any device.

  Device Manager open to check what hardware device is not working properly on the computer, and then uninstall it.

  (a) open Device Manager by clicking the Start button.

  (b) click on Control Panel, click system and security, and then, under System, click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) now check if any device has any yellow exclamation on it.

  Once you find any device with any brand, right click on the device and then click on the option to Uninstalland restart the computer and check if it works.

  If you can't find any device with all brands then check by activating hidden devices.

  (a) in Device Manager click on view and later click on Show hidden devices and check to see if you find any device with exclamation point and uninstall

  If the previous step fails, run Windows update to check and install the update from the recommended on the computer device driver.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If all steps above fail, then contact the manufacturer for updated driver for any device connected to the computer.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message during playback of a file of music in Windows media player.

  Original title: Media Player

  Every time I TRY to PLAY a MUSIC FILE I GET A ERROR MESSAGE SAYING the SERVER EXECUTION failed. OTHER PLAYERS WORK OK. I'M ON WINDOWS 7

  Hi herb,

  Welcome to Microsoft communities.

  I understand from your description, you get an error message during playback of a music file in Windows media player.

  You did it all changes before the show?

  Method 1: Run the Troubleshooter:

  Open the troubleshooter in the Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2:

  This problem can occur if the Windows Media Player library database has become corrupted.

  To resolve this problem, delete the Windows Media Player database. To do this, follow the steps mentioned below:

  a. exit Windows Media Player.
  b. click Start, click run, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
  c. Select all files in the folder, and then click delete on the file menu.
  Note You don't have to remove the folders that are in this folder.
  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Method 3: Allows you to uninstall and reinstall Windows media Player:

  Step 1: Uninstall and reinstall Windows media Player from windows turn on or off windows features

  a. go to Start and in the search type "turn Windows features on or off". "

  b. click on "Turn Windows features on or off".

  c. find the multimedia features and uncheck the brand in the face of Windows Media Player.

  d. restart the computer

  Step 2. Reinstall Windows Media Player:

  a. go to Start and in the search type "Turn Windows features on or off".

  b. click on "turn Windows features on or off". ""

  c. find the multimedia functions, and then place a check mark in front of Windows Media Player.

  d. restart the computer.

  Turn on or off Windows features

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• You receive the error software device driver has not been installed successfully using the USB LAN cable

  Original title: Please help!

  I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

  1. don't you make changes on the computer before the show?
  2 are you able to get any USB devices to work in USB ports?

  Check the status of the device and the driver Version:

  a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. double-click the category containing your device driver and thendouble - click the device name.

  c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

  d. click OK, exit Device Manager.

  Method 1:
  You can update the drivers on the manufacturer's Web site and check.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Use Windows Update to find a device driver
  Note to use Windows Update, you must be connected to the computer as an administrator:
  Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  b check the updates.
  AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
  If updates are available, click the driver you want to install, and then click on install.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  If you need further assistance, please answer and we will be happy to help you.