No sound since installing the latest Windows updates

Similar Questions

• I can't install the latest windows update. My error code is 0x800706BE.

  original title; I can't install the latest windows update.  I used Microsoft Fix It and still not able to install the update.  My error code is 0x800706BE.

  System information:

  Microsoft Windows XP Professional

  Version2002

  Service Pack 3

  Dell Computer Corporation

  Dell Dimension DIM4300S

  Intel Pentium 4 CPU 1.60 GHz

  1.59 GHz, 768 MB Ram

  Internet explore 8

  Norton Internet Security 2011 (updated)

  Hi ScottCarter,

  ·         Did you do changes on the computer before the show?

  ·         You are trying to install updates?

  ·         Are what fixit you referring?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

• After you have installed the latest Windows updates, Lenovo T60 laptop running Vista takes 30 minutes to start

  I have Vista Home Premium installed on a Lenovo T60 laptop. The machine is
  3-4 years.

  Although the system has never been quick to start, after the latest Microsoft
  update has been downloaded and installed, it now takes about half an hour to start
  the system of cold starts and 20 minutes from the sleep position.
  It also takes a long extra time to get the Explorer running

  What happened during the update may cause this extra on drag
  performance? How can I change?

  I tried the system restore, but it would allow me to go back only to the point
  When the MS Update has been installed.

  Thank you.

  HR Sirois

  Is your system error free?

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the copy button to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• Cannot access internet after installing the latest Windows Update

  * Original title: Question access to the internet after you have installed the latest update

  Last week, I installed the latest update of Windows 8, however once installed, I was no longer able to access the internet and became a message saying that the page cannot be displayed. Below it there is a button to click to solve the problem of connection but I did and it came back with no connection problem.

  I reset my router, but there was no question that I could access the internet on my phone and my roommates laptop. The only way that I could access the internet again was to restore my pc and remove install.

  I was then forced to install the update tonight and it's the same thing so I had to uninstall these updates again to access the internet.

  Can you please tell how can I install the update it will affect my ability to access the internet?

  Hi Victoria,.

  Please help me with the following suggestions:

  1. using modern Internet Explorer user interface or Desktop Internet Explorer?
  2. your computer is in a cable or wireless internet connection?

  3. What is the number of the kb article that is causing the problem with the internet after installing the update?

  4. are you referring to Windows Update (KB2919355) 8.1?

  Windows Update: Frequently asked Questions see (how know what are updates
  been installed?)

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  Method 1: After the update is installed, configure the computer to boot and check if you questions persists:

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Note: After troubleshooting, consult this section «How to reset the computer to start normally after a boot minimum troubleshooting»

  Method 2: Click on the link below to troubleshoot if the internet explore does not work:

  Why can't connect me to a network?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

  Warning: Reset Internet Explorer settings will not affect your browsing history, unless you check the delete personal settings during the reset. If you want only to view or delete your browsing history, you don't need to reset all the settings of Internet Explorer.

  I hope this helps. Answer please if you have any additional questions with Windows.

• After you have installed the latest Windows updates, my Bluetooth stopped working

  I installed the last set of updates to the window and it caused my Bluetooth to stop working.  Reinstalled drivers from the dell website and it still does not work. Fact a restore point and devices have started working again. Updates were the only changes. No other programs or updates installed.
  What updates do interfere.

  Dell E6530, Windows 7 64-bit, Intel core i5, office 10

  Original title: bluetooth

  Are you set for Important updates only (which is recommended)?  If not, was an updated device driver?  It is best not to let Windows Update process device drivers.
  If you cannot reduce it any other way, you can try to install the updates again one at a time.  I have not heard about recent blue tooth switn of the problems Windows updates recently.

• Cannot access Internet after installing the latest Windows updates

  Hello

  updated the last windows update and now can not access the internet even if I said I'm on internal appreciate any help in this matter.

  Have reset the laptop to an earlier date and no problem, but as soon as I download the update of windows, no internet access

  " Original title: blocked internet access"

  Hi Eugene,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. What is the type of internet connection you use - wired or wireless?
  2. Do you get any error message when there is no internet access?
  3. What is the number of KB of the update, after which the internet disconnects?

  [To view your history of update:]
  a. Open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), touching or clicking on parameters, typing or clicking on Change PC, then type or by clicking on update and recovery.
  [ b. press or click on see your update history.]

  The question could arise if the specific update makes changes in the Windows network properties and the update package has been damaged. Other important reasons include the firewall from the security software, third-party software conflicts etc.

  In order to diagnose the problem, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Method 1: Troubleshooting of connection Internet run.

  a. press the Windows key + W key on the keyboard.

  b. type Troubleshooting in the "search" tab and press enter.

  c. click show all on the left panel.

  d. click on Internet connection, will new popup window.

  e. follow the instructions on the screen.

   

  Let us know the results performing the Troubleshoot utility.

  Method 2:

  Reset the DNS and TCP/IP settings.

  1. Press the Windows key + X.
  2. Click prompt (Admin).
  3. Please enter the following commands and press ENTER after each one.
     NETSH INT IP RESET
     IPCONFIG/FLUSHDNS

  Restart the computer to check the issue.

  If the problem persists, refer to the following method.

  Method 3:

  Temporarily disable the security software and check if it helps.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most

  cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Additional information:

  Windows wireless and wired network connection problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• Installed the latest important updates this morning; upon restart, the computer didn't work as expected. now behaves as if the motherboard is dead.

  This morning at appx. 1:30 AM PST, I installed the latest important updates from the Windows Update Manager on my HP Pavilion dv6000 laptop. I did manually, by a double click on the little icon in the toolbar and clicking on the button install. Once the update had completed, I clicked on the "restart later" button and close my computer using the Shut Down command - the usual symbol "click here to close and complete the installation" didn't appear. I thought it was a little weird, but chalked it up to the fact that I had taken the lead and made the installation.

  About an hour and a half later, after being able to get to sleep, I decided that I would try to do a job. I pressed the power button and my computer started well upward, giving me the ' now install, update (1/3) [percentage] completed. Do not turn off your computer. "message. Which is quite normal, let him do his thing without turning it off.

  The update is completed and I am greeted by my office. Displays the logon to Gmail Notifier window, and that's when my problems began: I tried to move the arrow to disappear, and the arrow has not moved. The circle of "transformation" had, next to the arrow, so I thought it must be a minor hiccup. I've waited, waited and waited... But even after all of my normal startup programs loaded, my mouse has failed.

  Pressing the Windows key to open the menu start does not work, either; It was as if everything had been disconnected. After waiting a few minutes, I decide that maybe I just need to restart and, given that my keyboard was not working, I pressed and held the power button until the system off (I know, I know, it's a horrible thing to do).

  I waited a minute, and then you press the power button. The lights came on, the fan spun, but the screen remains black as if I did nothing. I waited, because my computer arrived in the past tried to give me an attack of apoplexy by hanging several screens, but... nothing. The fan spun, the light shone their beautiful blue, but that's all.

  The only thing I have changed or done differently was the updates, I have not dropped my computer; I've not spilled something on or in I have a Targus chill mat that I use religiously. I download attachments from people I don't know no/trust (I can't, my antivirus program deletes attachments in emails from spam); I use Firefox with NoScript and anti-ad; My AV/Antispyware/malware program is always up to date and six types of awesome and more.

  My system is Windows Vista Home Premium on an HP Pavilion dv6000. I have an AMD Turion 64 x 2 processor and a Nvidia mobile graphics card (I don't remember exactly who he is; I can't the specs). I don't have a DVD of restoration, for reasons that did not need explores right now. I had my phone on... Two years, I think. I'll have to double check.

  I can't start in safe mode, because I get nothing - no POST, no beeps, without bumps. The CD/DVD drive makes some noises, as he is looking for a drive (there isn't one in the drive), and that's it.

  I think I have to take someone and make them open and see what's the problem, but I appreciate any thoughts/ideas/opinions/assistance that anyone can give. Thank you for your time and attention.

  Alas, no, the screen seems to be fine. He had not been acting funny before that, in any case. I checked out, and the external monitor just went to sleep because there is no signal.

  Thanks for taking a peek anyway. I guess it's a workshop for me and my laptop.

  Birdy

• USB 2.0 drives not recognized since the latest Windows updates

  I tried 4 different USB 2.0 on 4 different and no computers drives won't recognize readers for the latest Automatic updates.

  1 PC with Win 7 64-bit all service packs

  2 computer laptop w / Win 7 32 bit all service packs

  3 laptop w / Win 7 64-bit all service packs

  4 desktop w / Win XP Pro 32 bit all service packs

  All versions are professional, all devices are fully patched and recognise the mouse USB, HD', other USB devices.

  3 of the flash drives are Sandisk Ultra USB 16 GB sticks, one is nine of its packaging.

  1 is a 8 GB generic to Symantec given as a promo, but it is brand new.

  All these discs worked in these devices before the last major thrust of update.

  There is no splat / exclamations in the Device Manager.

  If all the USB controllers are removed and reinstalled, it does not address the issue.

  Difficulty of MS it detects no problem.

  USB 1.0 drives work!

  None of these devices are equipped with USB 3.0 ports

  Hi Laurence,.

  Please keep us updated on the status of the issue and apologize for the lack of communication.

  As you mentioned that this problem occurred after installing Windows updates, then I would suggest you to restore your computer to a restore point that was created before the date and time when you started to notice the problem.

  To do this, please follow the steps from the following link:

  Restore system files and settings

  Note: When you use the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  After restoring the system, try to manually install the Windows updates (try to install one by one) to identify what update caused this problem.

  To do this, please follow the steps from the following link:

  Install Windows updates in Windows 7

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• I don't know what error code I get when trying to install KB974417, KB963707 and KB939683. I found a solution for KB974417 which is to install the latest Windows Installer. What about the others? KB963707 and 939683.

  I installed Windows Installer 4.5, because the support microsoft inform me that I have the latest Windows Installer Package to install KB974417. But I can't find solutions for KB963707 and KB939683.

  To get the Windows error meets during updates, you can try to read the Windowsupdate.log file using the http://support.microsoft.com/?kbid=902093 article

  Also try the few measures available under article http://support.microsoft.com/kb/971058, the http://support.microsoft.com/kb/822798 and the http://support.microsoft.com/kb/906602 if they relate to your error.

• Windows Start menu does not work when installing the latest important updates 25

  I am running Vista Home Premium.  When I install the important updates 25 current, the Windows Start menu will not work.  I use McAfee security updates have to do with security, so I guess there is some kind of conflict, however, I run the exact same system and security on my laptop and it has no os of problems of this nature.  Is it possible that I can solve this problem and install important security updates?

  Hello

  Thanks for the reply.
   
  I suggest you to check if you're facing the same question new account user/administrator account.
   
  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-AU/Windows-Vista/fix-a-corrupted-user-profile
   
  Let us know the status of the issue.

• I just downloaded the latest Windows updates, now online videos don't work on Firefox but on other browsers, does anyone else have this problem?

  After that download the latest version of Windows Update, I found that I could not play videos on YouTube or other sites. Switching to other browsers I found that I could play these same videos now without any problems. So I did a system restore to determine if updates of Windows had hit video play using Firefox. The restore point has been updated with the day before the download of Windows has occurred. After System Restore has been completed I could now play videos using the Firefox browser.

  To ensure that Windows Update has been the problem, I downloaded again the most recent Windows updates and once more could not play videos on any site using Firefox. System Restore has been used to put my computer on the eve again and once more the OE videos would play in the Firefox browser.

  In fact, your answer took me in a different direction and I found this on the Adobe site:

  The extension of RealPlayer for Firefox, the download and registration, has problems of compatibility with Flash Player 11.3. If RealPlayer is installed Flash Player content does not appear. YouTube provides an error message when you try to view a video.

  To work around the problem, do the following:

     Start RealPlayer.
  

     Click the RealPlayer icon in the upper-left corner and select Preferences.
  

     Select Download & Recording in the left menu and deselect Enable Web Download & Recording for These Installed Browsers option.
  

     Click OK and restart Mozilla Firefox.
  

  Once I did this I could replay now videos in Firefox.

• in a loop of constantly trying to install the latest security update. more and more, please help.

  I installed ie8 security was last updated. Now I'm in a 'loop', he says constantly ready to install, I click on install, then I reboot, then he asks the same question again, ready to install, I click Yes then I have to restart, then when windows starts, he asks me once again. Finally I turned automatic updates, so now I have not this propblem. I want to solve this problem, please help me, Greg.

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For individuals, free support for security updates (only!) is available by calling the 1-866-234-6020 or 1-800-936-5700 to the United States and Canada or by contacting your local Microsoft subsidiary. For more information about how to contact your local Microsoft subsidiary for security-related support questions updates (only!), visit the following Microsoft International Support Web site: http://support.microsoft.com/common/international.aspx?rdpath=4

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  (E.g., US & CA) North America customers can also obtain instant access to unlimited no charge by e-mail or chat support for security updates (only!) by visiting the following Microsoft Web site: http://support.microsoft.com/oas/default.aspx?&prid=7552

• Norton Internet Security and the latest Windows updates

  Why my Norton Internet Security 2010 product stopped chasing the latest updates Windows Automatic (9 total)?

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Spectrum of HP: Cannot install the latest Bios Update

  I get the following error message when it installs the update to the Bios: C2-error: area is write protected

  Someone knows how to fix this?

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  How about trying to update using the USB in the BIOS/UEFI > > http://support.hp.com/us-en/document/c00042629/ ?

  You can also check this > > http://h30434.www3.hp.com/t5/Notebook-Operating-System-and-Recovery/SOLVED-Can-not-update-Bios-Probook-640-G2/m-p/5683581#M446920

  ========

  Some notes - as mentioned in the article itself - updated only if you really must. Personally, I don't recommend do you it unless you're having problems with your existing BIOS and you are sure that the new BIOS will fix it.

  General recommendation I provided to users/customers is NOT to upgrade the BIOS/UEFI, unless they live any sort of BIOS/UEFI problem specific. Just for updaing and update just for the use of the latest verson is not the solution. Any type of update (no matter what and that relesed it) can solve 2 problems but could introduce more than 10 questions. In addition, upgrading the BIOS (for any provider) are risky more because the BIOS recovery is not that easy compared to updates of typical software IF something goes wrong.

  It goes the same for Windows updates, OS update, drivers, etc - update/update updates IF you have any questions, you know are fixed in the new version or for some serious security problems. Otherwise, keep the existing version as long as possible.

  I hope this helps! Let me know if you have any questions or if you have difficulties