No sound via HDMI after upgrading Vista to Windows 7

Similar Questions

• No sound via HDMI after upgrading to windows 7

  I upgraded a sony Vaio VGX-TP3Z-B from vista Home Premium to Windows 7. I got a LCD TV Sharp that the monitor is connected via HDMI everything worked perfectly before the upgrade, but after I can't get sound through the HDMI to the TV, I can plug the speakers into the PC, but the sound is not as good as the way to TV.

  On the settings of the sound output device (HDMI) theDigital is shon as not connected.

  I checked for updated drivers and those installed seems to be later and Sony have no support for upgrades to Windows 7.

  I'm really stuck and frustrated, I hate to be beaten, can you help me?

  Dave

  Hello
   
  You can try the steps below and check if the problem is resolved.
   
  (1) start Windows Media Player on any video file.
  (2) make sure that you can see the video and sound on the laptop.
  (3) the right of the mouse, click on area of Windows Media Player (video)
  More options-> Devices tab-> speakers select from the list of devices-> click on the properties button
  (4) in the pop - uo-> "properties of the speaker" modal window select the audio device: => select "Digital Audio (HDMI) (2-high definition Audio Device)" (on the laptop)
  (5) save all window
  (6) close and restart Windows Media Player
  (7) connect the cable HDMI and swith on the TV for audio HDMI
  
  Now the works video + audio works perfectly on television.
  Thank you, and in what concerns:
  I. Suuresh Kumar-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Qosmio G30: No sound via HDMI after installation of Vista

  Hello..
  After installing Vista on my G30 HD DVD I have no sound on any application via a HDMI cable. Sound works fine on the internal speakers. He also worked very well under XP. Can anyone help?

  Hello

  The noise does not appear on the external HD TV which was connected to the Qosmio G30 via an HDMI cable. But the internal speakers work. Am I wrong?

  Buddy you check the sound options in the control panel?
  Check if all controls are set at a higher level and are not disabled!

• C6150 does not print after upgrading Vista to Windows 7

  Hello.

  I have an AIO C6150, which worked fine under Vista.  Since I've upgraded to Windows 7, I can't get a printout of any application or the windows test print.  The test print HP Solution Center works very well.

  -Printer is connected wireless

  -J' installed the latest driver from HP which is supposed to be ready for Win 7

  -J' have also installed the patch they recommend after upgrade to Vista

  There is no error.  Print job appears briefly in the Print Manager window, then disappears as if it printed.  I am at a loss, any help would be appreciated.

  Paul

  I found my issue as well, with the help of HP technical support.  Basically, it is a conflict between the generic drivers Windows and whole new drivers from HP.  Once that happened, it was a nightmare to get all the 'remains' of these two uninstalled drivers.  Once we did it, we have been able to recharge the HP driver package and everything works fine.

• Cannot print from IE 8 after upgrading Vista to Windows 7

  My laptop (HP Elitebook 8530w) uses two HP printers: Color LaserJet CP3525x (at work) and Deskjet 6940 (at home). Both printers are accessible via a local network.

  I've recently upgraded to Vista Enterprise to Windows 7 Enterprise.

  All still print fine (from Word, Adobe Reader, Windows Photo Viewer, etc.), except for IE 8! When I try to print a web page in IE, it only prints the page header, and in the contrary case, the journal will be empty. This problem occurs on both printers. (And of course this good worked before the upgrade.)

  Any ideas? Thanks for any help.

  Jeff

  (same poster)

  If anyone else has this problem, I found the solution on another forum (http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/920588e5-ccc4-4e24-83d6-606d5e3b1c70).

• Receiving IR of HP and MC remote control does not work after upgrading Vista to Windows 7.

  I upgraded a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Home Premium (32 bit) respectively of Vista and an HP HDX 18 and found that the small remote controls supplied with the PC HP no longer work the IR receiver to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in the section of the Human Interface of the HD-18 referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.

  I can not find a model of dv9249 specifically on the hp site. I found the dv9200
  series. you have a link to your specific model?
   
  in all cases, try to remove the Device Manager devices and if requested if you want
  to remove drivers, select Yes. then make a stop at cold and then turn it on.
  Finally, see
  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/Ene-CIR-receiver-conflict-in-Windows-7/TD-p/161289
   
  link of a person found an alternative driver that solves the problem) on the page
  (See above).
   
  It seems that several HP models affected related issues.
   
  If this does not resolve the problem, suggest that also posting in the forums of HP.
   
   
   
  On Saturday, January 15, 2011 19:12:50 + 0000, shanewc wrote:
   
  > I upgraded a HP HDX 18 and a laptop HP dv9249us for Win 7 Ultimate (64 bit) and Vista Home Premium (32 bit) respectively and have found that the small remote controls supplied with the PC HP do work more the receiver IR to control WMC.  For the moment I tried to find a solution for the dv9249us, as the HDX has also a greater remote specialized for the tv tuner, which is still working, but I found that HP did not provide software Win 7 upgrade for this model.  I tried a thought fix it was to be a known side effect of the upgrade process because he appeared in two different rooms and found a HP IR driver referenced to correct this problem for another model called ENE CIR Receiver Driver (sp41645.exe) and install this on the dv9249us without result.  When you check the Device Manager on the dv9249us I have not found reference to an IR unit either in the areas of Human Interface or Universal Serial Bus controller.  I found a reference IR in humans
  Interface
  > HD-18 section referencing an ENE CIR Receiver.  Ideas that you could provide for a non-professional would be appreciated.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Resolution problem after upgrading Vista to Windows 7.

  Original thread: Windows 7 upgrade messed up the screen resolution

  Hi, I had Windows Vista on my laptop. I installed Windows 7 Professional on the laptop but now my resolution went funny like the old days before windows xp. Help, please

  If the manufacturer of your laptop doesn't provide specific drivers for win7 and Vista drivers do not work, it would seem then win7 is not supported on this laptop

• Built-in mic stop working after upgrading Vista to Windows 7

  I've checked everything I can think of.  Nothing is cut.  When I go into control panel - sound - recording, there is a green check mark on the mic, but it captures all the sounds.  The microphone worked before I upgraded.  Any ideas?

  Jorjannaz wrote:

  (1) MODEL # CQ60 - 417-CA

  (2) P/N: NW158UA #ABC

  (3) the product key: {information}

  I think I got that right?

  Thank you.

  It is always helpful if you identify your OS by saying also that it is 32-bit or 64-bit.

  Here's where tit portal for your laptop support pages are.

  Go into the control panel. Select sound. Select the record. Select Configure. Select Configure microphone.  You should see what I have in the next image if all goes well at this point. If you speak into the microphone, you should see a green bar mobile.

  

  view your results.

  Best regards
  ERICO

• C4480 does not print after upgrading Vista to Windows 7

  Hello

  I bought a C4480 & installed on my laptop running Vista.  I bought recently installed Windows 7, it & printer worked OK. 2 days ago HP sent the file: PS_AIO_03_C4400_NonNet_Full_Win_WW_130_140.exe, (1/1, 205.09 M)

  I downloaded & installed, now the printer does not print. It scans ok just will not be printed. Called HP & said it was Microsofts problem. told by Microsoft of $ 80 or reinstall my computer back to the factory default settings. Not knowing much about computers I'm not want to do. The computer tells me the spool of printer off & to start but when I open the printer spool is on. I hope you understand that this is my 1st post.

  There is a patch for this here.  Try it!

• No output micro HDMI after upgrading to Win 8.1

  My new Yoga 2 Pro has a secondary display connected via micro HDMI port. He first worked as a charm. But after upgrading to new Windows 8.1 (this is done automatically) it is no longer produced anything to micro HDMI port. Display and the cable is fully functional. But even if the screen is turned on, the computer is unable to save and apparently it cannot display anything. Micro HDMI port seems to be non-existent.

  After upgrade of windows, I tried to uninstall / reinstall the display driver. I also upgraded to Win 8.1 Intel drivers versions found on the support site of Lenovo (including the BIOS display driver Intel HD 4400 15.33.18.64.3496 and chipset 9.4.0.1026, 76CN38). But nothing seems to work.

  A solution in the forum is to change the cable, but I think that there is no sense here that the cable worked perfectly until the upgrade.

  Can anyone suggest a solution?

  Lenovo: Is there a driver for Intel version 15.36.0.3652 on the Intel Web site. However, there is a blockage on the pilot, you need to install own Lenovo driver downloads. Can you check if this solves the problem?

  Sorry, a new cable solves the problem

• Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector?

  Can I send sound to the new apple tv to airplay speakers and around things sound via HDMI to the projector? My projector has HDMI but no audio output. Thank you.

  You can set the audio output to the airplay speakers in settings on Apple TV

• Re: Satellite A300-1MC - no sound via HDMI connection

  When I connect my Satellite A300-1MC on via connection receiver HDMI audio Yamaha in order to play music, no connection is possible, even without sign HDMI on the receiver is lit?
  any ideas?
  problem with the drivers or something else?

  This Toshiba document may be useful:

  + No sound via HDMI +.
  http://APS2.toshiba-tro.de/KB0/TSB8802F00000R01.htm

  The error is caused by the order of the pre-installed Intel display driver installation.
  The problem could be fixed by reinstalling the Intel Display Treibers V15.9.5.1502 or higher.

  Check it out!

• Satellite Pro L300D - upgrade Vista do Windows 7

  Hello

  I'm trying to upgrade Vista to windows 7. After running the Advisor Windows 7 it tells me to uninstall and reinstall ATI Catalyst install Manager and Catalyst control center Branding.
  I'm ok with the uninstall but need help on how to do the reinstall.

  Could someone give me some advice please?
  Thank you.

  HH

  Hey,.

  This means that you are looking for a new display driver for Windows 7, right?

  Well, normally as you can get on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & download > download drivers

  I checked the Web from Toshiba site and there is a display driver for your model. Windows 7 32-bit and 64-bit, both are supported and it s version 8.634.1

  It is useful for you?

• Satellite P200 - 17 c - upgrade Vista to Windows 7

  I'm looking to upgrade Vista to Windows 7, anyone done this? And all their problems with drivers etc?

  Thank you

  Hello

  I put t know what you want to hear exactly now, but you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that this model P200 belongs to the PSPB6 series.
  Therefore, it seems that all the drivers available for Windows 7 32 bit.

  In general, Vista and Windows 7, I can say that new OS runs much faster and has never had a problem yet. I can recommend it! :)

• Upgrade Vista to Windows 7, files using the second internal hard drive and Windows Easy Transfer.

  I have a desktop pc with 2 internal hard drives.  A hard drive has the BONE and the second hard disk is a separate partition.  (I do not combine hard drives using RAID.)  If I upgrade Vista to Windows 7, the upgrade will be to reformat hard disks or just a hard drive with the operating system?  Should I remove the second hard disk of the computer just to be sure?  The second hard drive must be reformatted for use with Windows 7?

  Thank you.

  You must install the upgrade in the Vista operating system.

  For Windows 7 install questions:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner