No sound/video game; Only the system sounds

I have a Toshiba Windows XP and there is no noise video or game, only for system sounds. Even though I have earphones in, it's the same problem. Someone please help me. I like to watch videos and play games with the sound. Thank you.

Hi kineticToast,

·         Did you do changes on the computer before the show?

·         D you get an error message?

·         What application you use to play the videos?

·         Are what games you referring?

Follow the steps in the article.

How to troubleshoot sound problems in Windows XP

Tags: Windows

Similar Questions

  • video game like the 'w' key controls are being powered with numbers specifically a sequence relies on more than once

    the old switchero
    video game like the 'w' key controls are being powered with numbers specifically a sequence relies on more than once

    Hi mag1475,

    I suggest looking up the keyboard key parameters in the game and reset the default settings, check to see if it helps.

    Also connect another keyboard to the computer and check if it the question persists in the game.

  • How to restore the multimedia controller and multimedia video controller to the system?

    How to restore the multimedia controller and multimedia video controller to the system? These items are indicated with yellow exclamation point in the conflict. How to solve these elements to correct the situation?

    Scan your computer with Speccy, Pc Wizart or SIW software and download the driver from manifacturied of the material.

  • Impossible to back up only the system in Win 7 SP1 x 64 image (error code 0 x 80780020)

    I am unable to back up only the system in Win 7 SP1 x 64 image (get the error code 0 x 80780020).

    Also I can not create restore manually points, nor is Win 7 automatically create (that is to say, I have zero restore points) of restore points

    Good suggestions informed please?

    concerning

    JED

    I wonder if this is disabled: Microsoft Software Shadow Copy Provider (swprv)

    The Microsoft Software Shadow Copy (swprv) provider creates backups of important system files and settings. When you install the software, install, or update of windows, that a shadow copy is created to wrap something bad happens during the installation.

    Service name: swprv

    • Description: Manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, any services that explicitly depend on will fail to start.
    • Path to the executable file:C:\windows\System32\svchost.exe -k swprv
    • Startup type: Manual

    services.msc

    Microsoft Software Shadow Copy Provider

    This indicates, must be handwritten, but mine is set to auto

  • [SOLVED] "High Definition Audio Controller" could not be started. "No audio devices installed." The Device Manager has no controller "Sound and video game. Information system has nothing under "audio devices".

    Hello

    I've had my laptop for 2 or 3 years, and the sound was always very well. Yesterday morning my computer came suddenly with the sound with a red X icon. She was not dumb, and yet no sound came. The sound options show that no audio or recording devices are installed (for disabled AND disconnected devices). There is no 'of sound devices or video game"in Device Manager. Information system shows no information (empty) under its device. However, in Device Manager, under system devices, "High Definition Audio Controller" has a yellow caution icon and cannot start.
    I have not installed a new OS or anything recently.
    I have a Dell Inspiron 1545
    Windows 7 Home Premium
    Service Pack 1 (6.1.7601 Build 7601)
    Pentium Dual-Core CPU
    64-bit operating system
    I tried:
    • Relocation and reactivation of "High Definition Audio Controller". I rebooted. No change.
    • Go to the Dell website, download audio drivers for my label service and installation. We decompress in the drivers folder and nothing happens. One will be unzip, try to take me by another plant for IDT Audio and then say 'the hardware found is not supported by this IDT' and is abandoned. I rebooted. No change.
    • Install drivers in safe mode. I rebooted. No change.
    • In administrative tools > Services, I found "Windows Audio". He had started and was on "auto". Six of its dependencies (3 parents, 3 children) had started and were to "automatic".
    • I looked at the system restore. There was a "critical update" this morning here. I restored to a point before update and restarted. No change.
    • Looked in the BIOS for an option on the sound, but could not find one. Restore the BIOS default and rebooted. No change.
    • Ran Microsoft Fix It I rebooted. No change.
    • By clicking on the audio task bar icon runs the diagnostic window thing. It detects a problem with the description: "material changes may not have been detected.
    • Put on the headphones. Nothing changes.
    I'll probably have to do a fresh install, am I not?
    I would be very grateful if you could help, thanks.
    Jerome

    Right, I fixed it myself.

    So I uninstalled "High Definition Audio Controller".
    But this time, instead of just turning it back on and let it install it himself, I clicked on "Analysis of the hardware changes" (under the Action). He finds that a new device called PCI something under other devices.

    Then I open up Windows Update and click on search for new updates (it also analyzes the drivers) and I think it just automatically reinstall "controller Audio high definition" and then there was no problem of yellow warning sign thing.

    If it does not, simply play in Device Manager with looking for changes on the hardware and the update of bollocks.

    If you're still stuck, try "Add inherited harware" (this will install an OLD device), click Advanced, click on "sound devices" and video games, wait a while, find a suitable device and continue the process...

  • Downloaded videos play only the sounds

    My son works on a project and makes a few digital video on a SD card.  Downloaded to his laptop and mine (Vista) and it is in the .mov format.  It will be important on his computer and mine with the sound, but no video is there.  Uploaded to photobucket and we can see the video and hear the sound.  We tried opening both Windows movie maker and Windows media player?

    Anyone have any ideas?

    THX

    My son works on a project and makes a few digital video on a SD card.  Downloaded to his laptop and mine (Vista) and it is in the .mov format.  It will be important on his computer and mine with the sound, but no video is there.  Uploaded to photobucket and we can see the video and hear the sound.  We tried opening both Windows movie maker and Windows media player?

    Anyone have any ideas?

    THX

    The .mov file format is a video format MPEG 4, released in 1998 and is used in Apple's Quicktime program, which is similar to Windows Media Player Media Player. As WMV (Windows Media Video) format .mov is connected with Quicktime

    Google for a free video converter and convert your .mov file formats supported by Windows Media Player.
    Here is the link to show you what formats are accepted by WMP:
    http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/mediaadvice/0071.mspx

    Suggestion only: always choose the wmv format, most foolproof format.

    t-4-2

  • Game and the system hangs during the update of software occurs prompt

    When you play many I experience a complete system failure after a game for a variable period.  I suspect that the problem might relate to the next available software updates and a quick occurring asking if I want to load/install the update.  I think that my PC is set to interrupt the game, when occurs a such prompt and I suspect that some games cannot manage this interruption and cause the crash.  Problem is that I can not find where swith this parameter to stop or INTERRUPT a game session when an update is available.  Update from Dell Support Center are an example of these software updates.  Any comments on this issue would be greatly appreciated.

    Thanks - Kevin

    Yes - you probably aren't going to find any setting specifically says: "I play a game, let me alone.»

    I've been a player for 20 years and did not have the updates stop playing once (and some of them were worthy of the experiences of game marathon. 'ha').  Of course - about my gaming PC I always put updates to the manual because I know if I leave auto on (at least) most of the time Windows updates, it could decide to update and restart at any time (without some other parameters).

    What I mean is that I think that looking in the right place, for the most part, to solve the problem you are experiencing.  Please follow the advice and at least update your video drivers (which is one of the largest components of the more modern games) and you can make the audio card motherboard chipset drivers while you're there.

    "Dell" stuff - it is not necessary.  Really.

  • Premiere Pro CS6 video game but the screen display is black?

    I recently installed debut video capture software and installed codecs for it. I recorded some videos and imported into premiere. When I put it in the sequence and press play, it shows just a black screen, but play the sounds. I played it in photoshop and fine vlc but not first pro. Also, I opened a project I worked on before installing the video capture, and it plays the sound, but shows an empty preview. It worked fine before. How can I fix? I reinstall the creation, or reset something?

    Well, I discovered the problem, first sort was not automatic running on my Nvidia card and that's why it didn't work. I reinstalled first and now my main project media is all dissociated, and the audio is messed up.

    Thanks for all your help.

  • The videos show only the upper-left corner of the image during playback.

    When I try to play a video in Firefox (23.0) on my Mac, all I can see is the fourth upper left of the video image.

    When I try to display the same video in Safari it works fine. The entire image is rendered.

    Mac OS X 10.8.4

    Hello

    There are a few things that could be the cause. Please can you try the following:

    • Check the Adobe Flash plugin is updated to the latest version
    • Open Firefox in Safe Mode and check if the problem repeats. If this isn't the case, then most likely an Add - it is at the origin of the problem.
    • Try turning off hardware acceleration - Options > advanced > General > uncheck "use hardware acceleration when available.
    • Try to disable "protected mode" in flash player or go back to the Flash 11.2 drive. See this thread for more details support: Flash video only showing a quarter...

    I hope this helps. If this isn't the case, then I would try a Firefox Reset. It will return its default settings Firefox but will keep your browsing history, bookmarks, etc..

  • Application of game on the system configuration

    Hi, can in games age of empires (all editions) and age of mythology and titans and other microsoft pc on my desk with the configuration: i-3 Intel Core, 2 GB RAM, 500 GB of HDD, OS - Windows XP and Nvidia graphics card

    Hello

    You can find information about the Microsoft games system requirements on the game site.

    Age of Mythology: minimum system requirements: http://support.Microsoft.com/kb/331403

    Age of Empires system requirements: http://www.Microsoft.com/games/Empires/tech.htm

    You can also read the following article.

    Support for common issues of PC games:

  • BlackBerry smartphones recharges the battery and the music/video game at the same time

    Is it possible to charge the battery and simultaneously play music or videos on my storm? If so, please direct me to where the instructions are located so I can set my phone to enable this option.

    You can do what you want while charging the battery.

    the only exception is if recharge you using the USB port AND you use your device as USB mass storage.

  • Video game in the window of the media player

    Original title: Windows Media Player

    I wish I could watch a dvd on windows media player in the lower corner of my screen. I was able to do on my version of vista in minimizing my screen and open a small 2 "by 2" small screen by pressing a small button for me to watch my video while I do other things on my computer, however, when I do it on windows 7 when I reduce the video and put my mouse on the WMP icon on the bottom of the screen I see the smallscreen I want, but I don't know how to do so that he can stay so that I can work on other things while I watch the smal at the bottom of my monitor screen. If you can help me with this that would be great. I work on my computer all day and am missing out on my cause of movies, I don't know how to do this small thing. Thank you

    Hello, Ken

    Assuming that you do not speak to the "Now Playing" view, you can refer to the mode of the skin, while the media player is active hold CTRL and press 2 to switch to skin mode. In comparison, the view is on the air are quickly accessible via CTRL + 3 or by clicking on the button in the lower right.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What is the best/best way to cut a folder of videos for only the useful parts?

    Hello

    I have a folder of 30 + videos that have many unstable parts for them. What is the best way to cut the unusable parts in transfer?

    Best

    Hi Gorazdr27768010,

    I have a folder of 30 + videos that have many unstable parts for them. What is the best way to cut the unusable parts in transfer?

    Use the media browser and import the required clips.

    Import media into Premiere Pro | Adobe first Pro CC tutorials

    And you can apply points in the source monitor and exit before adding them to the timeline.

    Score Points in the Source monitor output and first Pro CC - YouTube

    Answer please, if this is useful.

    Thank you

    Ilyes Singh

  • Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem?

    Every time I play a video game on my computer crashes. How to solve this problem or better to diagnose the problem? Sometimes when I play a video game in the steam.

    Windows 7

    64 bit
    HP e9300z
    Processor: AMD Athlon II processor 4 620 X 2.60 Ghz
    RAM: 4 GB
    Graphics card: NVIDIA GeForce GT 220
    It does not give me an error message simply stops and restarts auto.
    When it reboots it just tells me that Windows has stopped unexpectedly.

    First - check that you have the latest drivers for your motherboard chipset, your video device, your audio device and your network devices.  The first place to look for those who are on the Web site for your computer model & specific brand:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4148392&LC=en&cc=us&DLC=en&lang=en&cc=us

    When you select your operating system (Windows 7 64-bit) I see that HP ony supplies those who they provided with the system originally.  It's practically worthless.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4148392#n177

    Yes, where to from here?  I would say that you should at least install the latest video card driver - as more modern games can use those strongly...

    http://www.nvidia.com/object/Win7-WinVista-64bit-301.42-WHQL-driver.html

    Download and install it.  If possible, you still have the original driver installed - this is more recent than most 30 months.

    It's an AMD 785 G chipset card mother configuration, if their site is correct.  Looks like you can download and install latest drivers from AMD for this also:

    http://support.AMD.com/us/gpudownload/Windows/pages/raid_windows.aspx

    I'd say it's a good start.

    What else?  It could very well be a heat problem.  Since it is a desktop - I suggest she get everything, buy some canned air for cleaning electronices and opening of this case and blow off any dust.  It can be quite the accumulation.  After blowing out, make sure that all the components that look like they 'plug' firmly/well connected.  Carefully.  Then, put the cover on and connect.

    Make sure that there is enough air around the case - put a fan in front of him if you have to.

  • Help! Only the first part of my production of exports.

    Hello world. I must begin by saying that I am completely new to the first Pro CC 2015 have switched to Sony Vegas only a week ago.

    I have a difficulty that doesn't seem wise for one big reason. The problem is that my production lasts 5 minutes and I can see it in the preview but very late. Waiting and waiting and waiting for its encode following export command that I find myself disappointed to see that the finished video contains only the first 35 seconds or so my production of all 5 minutes. The video works great, everything in these 35 seconds is how it should be, it is perfect, except the missing 4 minutes and 30 seconds. A fat that is not sensible is because the video, I'm trying to export is just the latest version. It was previously exported twice now. All I've done since then is add additional sounds and a few titles. I made sure that the Begin/End markers to cover the entire timeline on my screen of export

    There was an error that arose on a previous export, which then had to be restarted. The error referred to in audio encoding and suggested I should switch to one pass instead of two during the encoding. I've only seen this error once and honestly do not know if it is related to this problem or not.

    Intel Core i7

    principal of 16 GB of Ram

    2 GB of video Ram

    Windows 8

    Thanks indeed if you can shed some light.

    Thanks for the reply of Bill.

    Do you mean the main timeline? Forgive me, getting used to the Prime Minister. To answer your question, my best... There's no marker for the beginning or end up on the main screen. When you click export that I'm double-checking that the entire Sequence is selected as the Source and the start and end markers are in fact at the beginning and at the end. After four attempts, I had just finished with the first half minute of video rendering, however.

    I found a fix for the problem now, but still did not work what caused (to my slight annoyance).

    As an experiment, I deleted each sound track and the silent video exported now very well. To develop on this I have reinserted all the sounds, made all the sound tracks. Who has also exported very well which means that I have a video in its entirety. I fixed my own problem. I do not understand what may have caused it well.

Maybe you are looking for

  • I can't open the files in the folder "my pictures."

    For the last two weeks, I was unable to open the files in the folder "my pictures." For example, if I save the photo in my pictures, it will not open if I double click on it.Someone at - it ideas?Thanks in advance.

  • Remote Desktop for Mac will not use the printer driver

    On an iMac with Lion 10.7.3, I try to get an Epson ReadyPrint T20 - TM to use the Epson driver when it is connected to our server Windows 2008 R2 with DRC 2.1.1 but it keeps using a HP Color Laser Jet 2800 Series PS we have not the HP printer and I n

  • Date lack fisier XML gui

    Maryse instalez eroare apare printer; date lack fisier XML gui

  • Aspire R7 in the dark download

    Hi, I have an R7 that I bought in May. My receipt indicates that I must have got a download of Star Trek Into Darkness also... but the indications of e-mail never came! Has anyone else has this problem? Because the download is supposed to be worth $

  • How to call the webview url property

    Hello again! How to invoke webview URL and set and new value to redirect the user? example, if I have this WebView { objectName: "MainPage" id: webView url: "http://testdomain.com/" } How to make a button to redirect the Web view to another area when