No sound when computer start

Similar Questions

• my computer dell laptop started making a "carried away" sound when I start and closed. Very short - 1-2 seconds.

  When I start and stop the laptop it makes took sound, almost like an airplane fly across the screen. It has been published. How can I get rid of it please?

  Hi, Dickie2025,

  You have a hard drive?

  Check the hard drive.  Open and close.

  Reset

  Is always there, the noise start/stop?

  Check the fans in the case

• given the date and time not set when computer starts. also have a problem with typing

  by turning on my computer, sometimes it lights up at all, and then I try several times so that it lights up. When switching on the main screen, it says error due to the date and time not set and puts my computer starts in safe mode. When I am that I then have to set the date and time again. Why this keep happening?

  on my second question that I have is when I type an email or anything, my writing will just jump on another line and start typing in the middle of other sentences. Why is it jump around like that?

  You may have a failed in your motherboard CMOS battery.

  It's a battery power supply NET, size piece that keeps your system settings when your computer is off.

  They cost about $5 to replace.

  http://www.computerhope.com/issues/ch000239.htm

  How to replace the CMOS battery in the above link info.

  See you soon.

  Mick Murphy - Microsoft partner

• All-in-one HP Officejet X576dw printer: printer makes a horrible deaf sound when it starts to print

  Hello

  My printer makes a horrible the deaf noise when I start to print something. Sometimes it will say open the door of the ink and remove the obstruction. I look and there is no obstruction. any ideas?

  Thank you

  If its warranty contact HP technical support right away because it will turn into a repair or replace scenario.

  The other day a person who repulses by contacting support until the machine was out of warranty, a month, they have posted on the forum, but nobody noticed. It is a machine very similar to yours.

  HP has a toll free of charge that you can call for support, since it is a notch above cheap printers low-end.

  If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.

• Presario v5195us sound when I start 4 beeps

  computer beeps repeatedly when I staart upward

  The computer actually starts after the beeps or it does not turn on? If it does not start and a few beeps, check this link for a solution: computer does not start and Emits a LED or beep Code

  You will need to mark that your memory is installed. The link will guide you through the steps.

  Good luck!

  Sean

• Problem due to a beep sound when I start the Pc.

  Hello

  I need help with a problem occurred a few days ago.

  I have a Compaq SR22IT and my Pc worked correctly until this problem: I started my pc and it does not start, but apparently first a short beep, and then a second long. I had a look on the internet and saw that these sounds is referring to a hardware problem, but I have not found my beep sequence. Could you help me to fix it on?

  Kind regards

  Massimo Galasso

  A short and one long beep indicates memory module number (live RAM). You can open the cover of the computer and try to reinstall the memory module and check if the computer is able to start or not. You can also remove a memory module at a time and restart the computer and check if it starts or not.

  Learn more about the audit of beep codes this.

• Drivers not less than or equal error when computer starts.

  Original title: error.

  Hello. Today, after loging on my desktop, rebooted pc. When the computer reboots. same problem again. I tried to reinstall windows xp, but after copying files and restarting. either it gets stuck before loading windows or give me the blue screen with the drivers not less than or equal, and other warnings on blue screen restart when... tried to replace the drive hard but same problem. P4: 2.60 ghz (it was a celeron 2.0 but it changed on 2 months) 512 MB of ram (that's 256) vga added by me.and the drive restarts several times or turn off... help please

  Hi marilym,.

  Please write us with the following details so that we can better help you.

  (1) what is the exact full error message?

  (2) what is the brand and model of your computer?

  The issue you described could be because corrupt drivers installed on your computer. Follow the steps in the link given below. The link given below is for DRIVER_IRQL_NOT_LESS_OR_EQUAL errors as well.

   

  Stop error message on a Windows XP-based computer: "STOP 0x000000D1".

   

  http://support.Microsoft.com/kb/916595

  I suggest you to provide us with the minidump files so that we can understand the root cause of the problem and help you at best. Follow the instructions in the link below.

  Use SkyDrive download collected files and post screen shot/image

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  Follow the steps in the link, find the question and if the problem persists we write with the minidump files. We will help you to come.

• New monitor displays an Error Message "Signal out of range" when computer starts

  Installed new ASUS VS24H-P control on my computer and I get this image of "out of range" bouncing around the corners of the screen.

  This means that the computer sends a signal that the monitor is not capable of displaying.  It could be:

  • A screen resolution (width x height pixel size) is selected, the monitor cannot display
  • The refresh rate (Hz) is the one who can not display the monitor
  • These two

  If you have another monitor, you can plug it to visit your office. Right-click and choose the resolution of the screen, then turn it down to a 'safe' resolution like 1024 x 768 (most monitors can display this).  Then plug your new monitor back and turn the resolution back to a better suited for this monitor.

• No sound when windows media center units starts up

  No Media Center window no sound when it starts all other sounds ok HELP

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Audio problems in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

• Satellite L100-130: every moment of sound when start the computer

  I have a Toshiba Satellite L100-130 (my first laptop and my first experience with Windows XP). When I start my computer I hear the Microsoft Windows XP, but after that I have to manually set the volume, because it is set to 0 whenever I start my laptop.

  I wanted to know if this is normal with Windows XP/portables or there is something wrong with... nothing...

  Hello

  The sound at the beginning Windows XP is a normal problem.
  All the audio settings you can change in the control panel and sounds and audio devices

  If you don't have a sound while the laptop and the OS from so you can turn it off on sound tab sounds and audio and audio devices
  To change or disable the sounds you must change the settings in the program events window

• When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Original title: race Roller Coaster Tycoon 3

  When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

  Hi Redbaron666,

  Have you checked if the game works the clean boot?

  I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

  Windows 7 Compatibility Center

  Method 1: You can run the game in compatibility mode and then check

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  When I start the computer, my computer opens with a music (sound) very short and when I stopped, it closes with a short, loud music, causing disturbances to third parties. How to remove this noise?

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Step 1: Search for the issue in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. Click Start and then click Run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
  d. When you are prompted, click on restart to restart the computer.

  Step 2: Change or disable startup Windows and exit Windows sound and check.

  a. click Start, click Run, type mmsys.cpland then click OK.
  b. click the sounds tab.
  c. under program events, click Start.
  d. in the sounds box, click (none), or different sound, and then click OK.
  e. click exit Windows.
  f. in the sounds box, click (none), or different sound, and then click OK.

• When I start my computer, it makes a very loud beep, how can I remedy this?

  WHEN I START MY COMPUTER, IT FACT BEEP LOUDLY, HOW CAN I REMEDY?

  Hello

  Sound beeps are error codes that describe a problem with your machine. One
  continuous beep may mean keyboard (loose or bad cable), losing the card, power, shorts or
  Another problem according to the system/BIOS manufacturer. Other models of beep have other meanings
  According to the manufacturer of the BIOS.

  Startup and select CONFIGURATION/SETTINGS (BIOS/CMOS) - F2 you start - look like usually
  for the creator of the BIOS then see here:

  Computer MESSAGE / beep codes
  http://www.computerhope.com/beep.htm

  If my computer beeps and won't start, what do the beeps mean?
  http://KB.IU.edu/data/afzy.html how to troubleshoot Beep Codes
  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  POSTAL Codes beep
  http://www.technick.NET/public/code/cp_dpage.php?aiocp_dp=guide_beep_codes

  Power on Beep Codes post
  http://www.pchell.com/hardware/beepcodes.shtml

  It may have other check so with system Maker or motherboard for custom manufacturer
  systems.
  
  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• When I start my laptop, sometimes the sound does not work.

  When I start my laptop the sound sometimes play and sometimes does not play

  original title: his record game

  Hello
  1. what version of Windows is installed on your computer?
  2 - is specific to an application or a window?
  3 are you aware of any hardware or software changes, prior to the beginning of the question?

  Check the steps mentioned in the links below and check if the problem is resolved:

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  (Note: the link above fits Windows Vista, 7 and XP.)

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Post back with the State.

• Why my computer Vista closes when I start mode safe?

  Why my computer closes when I start in safe mode

  Hello

  Safe mode works correctly without trying to install the drivers?

  If so the it's the Belkin driver.
  
  ====================================================================

  It may not help him if the Belkin driver is the problem.

  If there really matters other than the installation of the driver are trying the methods during the previous
  convenience store and this one. Both have in common some methods.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  =========================================

  If necessary:

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.