No sound when the exporting from iMovie ' 09

Similar Questions

• When you export from adobe story to the final draft, there are numbers rolling down both margins. How can I get rid of them?

  When you export from adobe story to the final draft, there are numbers rolling down both margins. How can I get rid of them?

  So that we can suggest an appropriate workaround solution, we would need to have a look at your script of history

  Can you please mail version ".stdoc" of your script of history we at [email protected] ?

  You can export your Story script in the format '.stdoc' by ' file > save to disk ' option

• We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

  We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

  Thank you so much: D

  ON both phones, check the settings > phone > call on other devices > Off.

• Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

  Hello

  which is very probably wrong with my Airport Extreme?

  My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

  THX,

  Laura

  Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

  Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

  Hello

  Thanks for posting in the Microsoft Community Forum.

  I understand from your description, that you get beep when the camera is focusing.

  To better understand the question, please answer the following questions:

  1. have you made changes on the computer before this problem?
  2. is it works much earlier?

  Come back with more information to help you better.

  I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

  You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

  http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  For more information, see the link below:

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

  Thank you.

• Why my settings do not stay when I export from lightroom?

  I shot a video with expose too low so I imported into lightroom4 and set up the exhibit, it looks a lot like lightroom, but when I export the video and open it with another program that's just like the original. Why my settings do not stay when I export from lightroom?

  Jean-René Daoust says:

  I shot a video with expose too low so I imported into lightroom4 and set up the exhibit, it looks a lot like lightroom, but when I export the video and open it with another program that's just like the original. Why my settings do not stay when I export from lightroom?

  You will need make a new version with the settings being applied during export. Lightroom is non-destructive, while you can see the changes made in Lightroom if you export under the original... it's what you will get, the original unmodified file.

• Lightroom CC 2015.3 - filter being reset when the export attribute

  I export a subset of the images to display in the grid with the attribute of library filter set to 'Flagged '.  At the start of the export, the library filter returns to 'None', and all images are displayed on the screen.  If I re - activate the filter "Flagged" during the export, the filter is applied, momentarily before restoring it to "None".  The correct (Flagged) images are exported, but the remains of filter reset 'None' when the export is completed.  No idea why LR is reset the filter?

  This problem has been resolved after 3rd update of the plug-in plug-in both of which have been updated was JF Facebook and JF develop in bulk, so one (or two) could be in conflict.

• I have CS6, but I get no (fixed epub) when the export is their an upgrade, I have not been informed of

  Hi I subscribe to Creative suite and I have CS6

  However when I export from indesign I have not fixed "epub" option

  have I missed an upgrade or I need to reinstall.

  see you soon

  Transferred to InDesign EPUB forum

  As already indicated, you need to install CC2014.1. Look for it in your desktop creative cloud app and install it.

  Note that you must have an operating system that supports (Mac OSX 10.7 or higher or Windows 7SP1 or later.)

• No sound when you export the missing project like HD (AAC codec) video

  Hi there everyone!

  I am facing a problem when you try to export a finished project to iMovie as a HD video, no sound!

  Here's the scenario:

  MacBook Pro (mid 2010), OS X El Capitan free 10.11.2, around 90 GB of space on the hard disk, iMovie ' 09 (Version8.0.6)

  The project is finished in iMovie, ready for publication in HD, when I saw it there, no problem with the sound. However, as soon as I try to export and select HD output quality, the .mov file will open without playing a sound in Quicktime format. If I select "large" inferior quality, it gives me a sound .m4v file. Even when I select "export with quicktime" and manually select the audio options (AAC 256 Kbps) the final version will have all the sounds.

  A few months ago, I've been working on another project, it also exported in HD. When I check the first export view of the current project file information, it will say "Codec: H.264, AAC" size «1280 x 720, "when I export the current missing AAC while having the same dimensions.»

  I'm really not an expert on these matters, but I tried to look for some option in iMovie, no luck. Maybe someone had a similar problem or knows why it does not work. I would appreciate help.

  Thanks in advance!

  I was FINALLY able to get 1080 p with its new output using the following parameters:

  

  I also HAD to define the file manually to .m4v extension before hitting SAVE as iMovie he left .mov (and it has not yet worked the first time he encoding with the .mov file extension).

  I don't know what the latest update messed up in iMovie, but I've NEVER had a problem before the video release.  I hope that they get it fixed!

• When I export from Illustrator the quality is pretty low and pixelated.

  When I work with a logo, and when I try to export it, in all possible formats and sizes, it seems incredibly pixelated. I have attached a tif and jpg in two very different sizes and you can see here how it's pixelated, nobody knows what's going on? He drives me crazy...

  

  The problem you are having is that your little logo becomes noticeable anti-aliasing where the edges of your objects are not exactly aligned with a grid of pixels. In the image below, I created the object on the left at a size of 19 by 13px, but the preview but underlying pixel grid (see > overview pixelated), shows that all the edges have applied anti-aliasing because it focuses on pixels instead of the tail with the grid. (In the info panel, you can see that the X values and are 425,5 and 189,5.) I duplicated the object and put it right so it aligns with the pixel grid that eliminates then any anti-aliasing, because all sides are aligned with the grid.

  

  So the only way you are going to get a little more beautiful this logo version when you export it to a raster image is to make adjustments to the smaller size so it aligns with the pixel grid, but that may not be an option because then you want to change the logo. I wish I had better news for you, but a lot of small text in raster images usually does not work well.

• I get this error when you export from Lightroom 5 but the export complete despite the error.

  

  It is because the box "after export" in the section of post-processing at the bottom of the export dialog box is empty, which is not valid. Use the drop-down list and select one of the options (doing nothing is fine), and then try exporting again.

• Audio skips out of sync in several places when the export of the first pro

  I have a short, 15 minute, turned to 23.976 FPS.  When I export to load in yet somehow audio jumps not synchronized to several different places.  The weird part is that in all cases there are 2 people in the scene and that a single audio out of sync breaks people.

  I went through all the audio files in the sequence in Premiere Pro (CC) and the audio fits perfectly even though I play in first.

  I checked and double checked settings FPS in first and still, as well as other parameters such as the video and audio format audio sample rate, etc., and everything is consistent.

  I'm exported from Premiere pro using the "Multimédia" option and choose MPEG2-DVD, NTSC, 720 x 480, progressive quality of 23.976 FPS, 100, CBR, target 9.00Mbps, with audio PCM, 48 Khz, stereo, 16-bit output.

  Source sequence is 1920 x 1080 (1.0), 23.976 FPS, progressive, 48000 Hz, stereo.

  I also used Media Encoder on the same sequence to create an MP4 file and that seems to come out perfectly synchronized throughout.   So, I'll try using media encoder to create a .iso file, if possible.

  I'm new to this, all the words of wisdom or of things to check would be greatly appreciated.  Thanks, Bobw

  Voice out of sync with the lips.  I look for "bilabials" (P, B and M) in the speech, then make sure that the sound correctly synchronizes with the lips.

  I guess we can do exactly the same with notes on an instrument if it was of expert musicians.

  In any case, I turn on the "show time audio units" and then carefully align the appropriate sound with the position of the pack language appropriate lip. Often it's 'zoom' on the frame and audio tracks and the cleaning back and forth several times.

  OK, but let's go back to my problem.  That, it turns off does not exist.  I treat so badly that I had to remove the camera and audio sound recorder and sometimes contract between the two during a audio jack.

  AND, I actually had audio out of sync by about 3 images in three different places in my sequence, in one place.   And Yes, I looked at dozens of times and convinced myself that it couldn't be my work because I had "checked" so many times.

  This was caused by a drawing of lots of last minute "tweaking" and "assume" that the settings I made did not affect the video tracks & audio following.  (HINT: it is almost always if you don't take extreme care and seems sometimes even when you do.)

  AND I also had a "nested" sequence I had absolute fits for audio, synchronize perfectly on.

  BECAUSE...   I had 'nested' video but I have NO audio with her nest.

  .... The "Lesson Learned" here is: "If your export ends with audio out of sync quit"guess"that it is impossible because of your Premiere Pro sequence is wacked"

• NB250 makes scream sound when the lid is closed

  Hi all

  I am facing this problem with my laptop NB250.

  Steps to reproduce the problem
  i. internal microphone and speakers are enabled
  II. play some audio.
  III. close the lid while the audio is playing.
  IV. when the lid is closed (or even when she is brought very close to the keyboard) there is a loud noise.

  I went to the shop where I bought the laptop. The technician he said that this sound is done because the microphone is taken directly above the enclosure when the lid is closed.
  But I do not think that the sound must be made when the lid is closed.

  I should be grateful if the following queries are processed:
  i. This is a problem with only with NB250?
  II. is it a common problem with all laptops that have the speakers placed next to the touchpad, which brings the microphone from the speakers when the lid is closed?
  III. If there is a problem with my laptop, what should I do to repair/replace?

  Thank you
  Yogesh

  Hi mate

  I think you're talking about the sound looping between speaker <->microphone.
  I n t have this model laptop but I found an interesting How TO from Toshiba on similar topic. It addresses s L500 series.

  Check this box:
  + Hissing sound +.
  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  Disable the microphone volume in the speakers properties and this will help you get rid of these sounds.

• Envy of HP dv6-7210us: No TV sound when the cable HDMI plugged to the PC

  Hello.  Worked last week and the connection mths prior HDMI, TV had sound.  This weekend, 20/08/16, the TV sound went, but still had the video.  Watched forums, utube and do the audio control panel Device Manager.  Audio high definition Digital Audio-AMD display device; not plugged in is grayed out.  clicked on it does not.  the default configuration is also grey so I can't even define a default value.  PC speakers.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  has worked for months and now no sound.  any idea?

  Hi @glgar1,

  Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

  I understand that you had previously no problem with the sound of the TV connected via HDMI. Last weekend, the noise disappeared. You have looked at the HP Forums, YouTube and checked in the Device Manager. Audio high definition Digital Audio-AMD display device; not trendy, is grayed out. and you clicked on it nothing doesn't. The default configuration is also grayed out, but the PC speakers work. You have successfully updated all the drivers. You bought a new HDMI cable, but change the cable did not help.

  The birthday Windows Update has been installed? 10 1607 Windows version. Have you tried to run the troubleshooter in Windows? Have you checked against viruses and malware? Did you run the HP Support Assistant? Here is a link to a post on answers.microsoft.com that can help. Audio HDMI 10 Windows does not? If the problem persists you can try to uninstall and reinstall the audio driver from the Device Manager.

  • Open the Device Manager
  • Click outputs and inputs
  • Right click on the speakers and uninstall
  • Restart your laptop

  If the problem persists, try using a different driver.

  • Open the Device Manager
  • Click Audio inputs and outputs to lengthen the list
  • Right-click on the speakers and click on update driver software
  • Click Browse my computer for driver software
  • Let me pick from a list of device on my computer drivers
  • Select the Audio device high definition
  • Click next and follow the prompts.

  If the problem persists, you can try a restore to when it was working properly. Computers HP - using Microsoft System Restore (Windows, 10, 8) Please let me know the results.

  Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.