No sound when the track is of a nature

Hey yall question,

I use first adobe 7 Pro and audio problem.

I have an audio track that I'm must by x 15, the sound works properly in the preview but when I export the audio scroll does not play, what is even more strange, it is that certain parts of the track that is not transferred quickly play fine in the export. Is this all simply not possible to export the audio slider or I do something wrong? Just to add more information, the audio track is selected and I have another audio track playing on the 2nd channel above the sound character

Thanks, I ended up saving only audio track projects through the preview and replaced it

Tags: Premiere

Similar Questions

  • We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple ID

    We have 2 phones and 2 computers and they all sound when the phone rings. How to change that? they all use the same apple - ID we buy apps and music coming from the same account. It all works very well, but we don t like any other device to RING eveytime a phone rings.

    Thank you so much: D

    ON both phones, check the settings > phone > call on other devices > Off.

  • Manufacture of extreme dual band 802.11 airport "buzz sound" when the power supply is attached

    Hello

    which is very probably wrong with my Airport Extreme?

    My Airport extreme dual band 802.11 done "buzzing" sound when the power supply is attached. The sound disappears immediately when power is disconnected and begins as soon as you connected again. It started two weeks ago, and it's really annoying.

    THX,

    Laura

    Most likely, the question is a bad capacitor in the diet. These can fail and are, unfortunately, not serviceable by the user... unless you have experience with electronic repair. You can try Apple, but chances are that you will have the best chance to get a replacement from another source, such as Impact Computers & Electronics or eBay.  I'm sorry.

  • Internal speakers work but no sound when the headphones are connected.

    Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

    Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

    Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
    Lists of control pannel/sound/speakerproperties
    control information
    Realtek High Denifnition
    Reatek'a

    Jack information
    LR ATAPI internal ATAPI
    LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

    some levels are muted
    Advance tab default settings
    quality of studio 24 bit 48000 Hz

    boxes of exclusive mode checked (when it is disabled, that no sound was heard)

    Information appears a jack was pluged into and when unplugged.

    the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

    computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
     
    I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

    With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

    My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

    Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

    Check with the manufacturer of your system's support and their forums (if any).

    Have you checked on the website of the manufacturer of the device for the latest drivers?

    Realtek - HD Audio Codec Driver right side
    http://www.Realtek.com.tw/

    Download - SAVE - will click with the button straight on and RUN AS ADMIN

    NOTE: Often restore audio drivers to check the version after installing and restarting is
    see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
    several tests according to the recommitments how much he makes.

    Rob - bicycle - Mark Twain said it is good.

  • Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera focuses

    Hello, I have problems with my Microsoft Lifecam 5000. Whenever I'm recording video with her, during playback, I hear clicking on and a beep sound when the camera is focusing. If I put it to my ear, the sound is low but I can still here it when it focuses.

    Hello

    Thanks for posting in the Microsoft Community Forum.

    I understand from your description, that you get beep when the camera is focusing.

    To better understand the question, please answer the following questions:

    1. have you made changes on the computer before this problem?
    2. is it works much earlier?

    Come back with more information to help you better.

    I suggest you to download and install the latest drivers for Microsoft Lifecam 5000 from the link provided:

    http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-5000

    You can even try recording by reducing the volume on the computer to the minimum level (mute) just to check if beep occurs.

    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

    For more information, see the link below:

    http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/webcam/LifeCam-Setup

    Hope the above information is helpful. If you have any question back to us, we are happy to help you.

    Thank you.

  • Make the midi recording when the track is not selected

    Hi, asking for my friend and will try and find a solution when I get home, but...

    My friend (using logic 9.1.8) made some record with about 12 actors/singers alive. I suggested to him that he must save the midi for keyboard player (who is also the composer of all parts) as well as the audio just to give them some flexibility later. It is a great keyboard player and uses its own external keyboard. (i.e. not logic instrument). All the other singers/actors are all audio.

    So it is easy to implement but as such sessions can become a little hectic and although the midi for keyboard track is in record mode, the midi does not record unless the track is selected on the left. Sometimes, in the madness of him the entire midi track remains not selected and if the midi data does not get saved. Is it possible to routing in the environment where the midi will get recorded although the midi track is not selected? Don't forget, the midi track is always made armed.

    Thank you very much

    Looks like you entered only followed for the targeted track has allowed...

    This picture isn't in X 9 - but it's the same setting...

    Make sure that this is not the case-

  • NB250 makes scream sound when the lid is closed

    Hi all

    I am facing this problem with my laptop NB250.

    Steps to reproduce the problem
    i. internal microphone and speakers are enabled
    II. play some audio.
    III. close the lid while the audio is playing.
    IV. when the lid is closed (or even when she is brought very close to the keyboard) there is a loud noise.

    I went to the shop where I bought the laptop. The technician he said that this sound is done because the microphone is taken directly above the enclosure when the lid is closed.
    But I do not think that the sound must be made when the lid is closed.

    I should be grateful if the following queries are processed:
    i. This is a problem with only with NB250?
    II. is it a common problem with all laptops that have the speakers placed next to the touchpad, which brings the microphone from the speakers when the lid is closed?
    III. If there is a problem with my laptop, what should I do to repair/replace?

    Thank you
    Yogesh

    Hi mate

    I think you're talking about the sound looping between speaker <->microphone.
    I n t have this model laptop but I found an interesting How TO from Toshiba on similar topic. It addresses s L500 series.

    Check this box:
    + Hissing sound +.
    http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

    Disable the microphone volume in the speakers properties and this will help you get rid of these sounds.

  • Qosimo G20-127: no sound when the TV in MCE

    my laptop is Qosimo G20-127. I have a problem. There is no sound on the tv. There is a picture but no sound. Windows media center is the operating system. Everything under MCE works well and it is solid under other applications, but not when I'm watching TV.

    Help, please

    Hello

    I presume that some sounds is set to mute option. Please check the first volume control. I guess you are using a standard antenna in the port and that he cannot imagine that the audio signal is not there.

    If you find what is the problem please let us know.

  • Qosimo G20: no sound when the TV in MCE

    I have no sound on TV. The sound is ok on video or in the windows, but when watching TV is not. I see pictures but no sound.
    Help, please
    Thank you

    Hello

    This happens because you have connected the laptop to the TV with an s-video cable.
    This type of cable supports video only no audio and signal.
    To receive the sound on the TV there? s necessary to use a second cable RCA (Red: /white its right channel: its left channel).
    You will need to connect additional audio cable RCA (red/white connectors) to the input on the TV and the black connector to the Jack headphone jack of your laptop audio R/L.

  • Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

    Hello

    Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

    I have a Toshiba Satellite Pro L670.

    Even when the sound in Windows is turned off the laptop do a annoying sound.

    Thank you!

    Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

    Do you really want to work until the battery is completely discharged?

    Anyway, AFAIK this notification level BIOS cannot be disabled.
    Let's see if someone else is better informed than me.

  • Envy of HP dv6-7210us: No TV sound when the cable HDMI plugged to the PC

    Hello.  Worked last week and the connection mths prior HDMI, TV had sound.  This weekend, 20/08/16, the TV sound went, but still had the video.  Watched forums, utube and do the audio control panel Device Manager.  Audio high definition Digital Audio-AMD display device; not plugged in is grayed out.  clicked on it does not.  the default configuration is also grey so I can't even define a default value.  PC speakers.  bought a new HDMI cable but no change.  all the drivers are up to date.  not really sure what happened.  has worked for months and now no sound.  any idea?

    Hi @glgar1,

    Welcome to the HP Forum! Thank you for becoming a member of the HP Forum. It's a place dynamite to get help from the community, to get suggestions and find what has worked for others. Because you have the best experience, here is a link for you to see, if you have concerns: first time here? Learn how to publish and more

    I understand that you had previously no problem with the sound of the TV connected via HDMI. Last weekend, the noise disappeared. You have looked at the HP Forums, YouTube and checked in the Device Manager. Audio high definition Digital Audio-AMD display device; not trendy, is grayed out. and you clicked on it nothing doesn't. The default configuration is also grayed out, but the PC speakers work. You have successfully updated all the drivers. You bought a new HDMI cable, but change the cable did not help.

    The birthday Windows Update has been installed? 10 1607 Windows version. Have you tried to run the troubleshooter in Windows? Have you checked against viruses and malware? Did you run the HP Support Assistant? Here is a link to a post on answers.microsoft.com that can help. Audio HDMI 10 Windows does not? If the problem persists you can try to uninstall and reinstall the audio driver from the Device Manager.

    • Open the Device Manager
    • Click outputs and inputs
    • Right click on the speakers and uninstall
    • Restart your laptop

    If the problem persists, try using a different driver.

    • Open the Device Manager
    • Click Audio inputs and outputs to lengthen the list
    • Right-click on the speakers and click on update driver software
    • Click Browse my computer for driver software
    • Let me pick from a list of device on my computer drivers
    • Select the Audio device high definition
    • Click next and follow the prompts.

    If the problem persists, you can try a restore to when it was working properly. Computers HP - using Microsoft System Restore (Windows, 10, 8) Please let me know the results.

    Thank you! If it helps you to find a solution, please click the button "accept as Solution" down below in this message. "If you want to say 'Thank you' to my effort to help, click on the" ""Twww.Mountainview.rsb.qc.ca Up ' give me a Kudos.

  • Low-frequency shaking sound when the backlight is disabled

    Very starnge.  It only happens for some MP3 song, and when the backlight turns off, I hear that very clearly some low-frequency (about 3-4 Hz) sound poping out.  Once I press a button and the backlight was on, pop vanish.

    Yes, after changing the EQ for 'Rock' to 'Normal', the problem is resolved.  I don't even have to use "custom" for the equalizer.  This problem makes me very carefully listern for the background music/noise.

  • No sound when the headset is plugged into the audio input jack

    When I plugged headphones into the audio jack, there is no sound.  The noise comes from the internal speakers.  I just installed System Mechanic and ran a system of analysis.  I don't know if the registry has been changed or what.  It is not a problem with the headphones; I tried another helmet and have the same problem.  The phone detects the headset, an icon in the Notifications area saying that a device has been connected.

    Inspiron 15 series 3543

    Realtek HD Audio Device

    Hello. See if it will work when you switch the driver Realtel native audio driver in Windows.

    1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
    2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
    3 Select this option to "Update driver software".
    4. click on "Browse my computer for driver software".
    5. click on "Let Me pick from a list of drivers on my computer".
    6. put the "Show compatible hardware" check box if not already checked.
    7. in the list of devices, click on 'High Definition Audio"(native driver).
    8. click on "next".
    9. in the update driver warning box, click 'Yes' (the driver).
    10 restart the portable computer if you are prompted. If not invited, so no need to restart.

    [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  • Laptop play outloud sounds when the headphones are connected.

    I have a laptop HP Pavillion with Windows 7 Home Premium, with a built-in microphone. I use my microphone on my computer to make Skype calls using the Skype program. I plug the headphones in my phone to hear what other people are saying in my Skype calls, however when I do this, other sounds coming from my computer are read aloud and do not get played in my helmet, so all those who are in the call to Skype with me can hear some sounds I play my computer.

    I would make sure all the sounds my laptop plays at all always go in the headphones and do not always play outloud as not to disturb the other memebrs in my Skype calls. Please help :( Is there a solution to this?

    Hi Swtgirl9314,

    Method 1:

    Step 1:

    In troubleshooting the problem, you can follow the steps below.
     
    a. Click Start, type Sound in the box to start the search.
    b. click sound in the results of search at the top of the start menu.
    c. click the reading notice the check mark next to the default device. For most users, the default device is pregnant, change of helmet. Make sure that the audio settings are configured as expected.

    Step 2:

    On the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

    Step 3:

    On the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

    Method 2:

    If the problem persists then I suggest you to apply these below mentioned steps to cut all other sounds when windows detects a communication activity.

    a. Click Start, type Sound in the box to start the search.
    b. click sound in the results of search at the top of the start menu.
    c. click the Communications tab.
    d. click on the radio button according to your needs, under when Windows detects communications activity.

    After completing the steps above, you can check the issue.

    For troubleshooting you can visit this link below.

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Help: Fuze distorts the sound when the display turns off

    Hello

    Since a few days, I own my rocket. Today, I recognized the following problem:

    When the display turns off the "rocket" distorts the song. It's a bit like stuttering, it's his bad.

    When I keep the screen turned on (by clicking on the boxes or more) he playes the song of good quality.

    The EQ is set to standard.

    Has anyone experienced the same problem?

    I don't know what to do, what an individual problem of my camera (default?) or maybe a general problem? I would stay there or should I change it?

    Thanks in advance,

    Stefan

    This problem is fixed in the next firmware should be out in the next few days.

    TO work around it, just put the equalizer settings on the equalizer custom for anything other than 0,0,0,0,0

Maybe you are looking for

  • When you try to open internet w/Firefox, I get a message asking me if I want to update. I think maybe it is an invader on my desktop computer. How can I fix it?

    In my taskbar, I click the Mozilla icon and most often the ' net opens automatically. Yesterday, this has changed; I click and get a message asking me if I want to use the 'updater' for updating my Mozilla. I think I have a virus or something on my s

  • How can I change a hard drive to an old drive sata150 sata300

    I just replaced my old hard drive with a new one, the old rate was sata150 but my other can go to 300. How can I display this, I have a desktop hp paviilion m7580n computer. My old drive was also a 300 GB, my new is a 1 TB drive.     Thank you

  • HP Officejet Pro 8600

    We bought a HP Officejet Pro 8600 a year ago and set up two laptops and a desktop computer to print to it. For the past 6 months my laptop was unable to print to it. We have tried re adding to my laptop but it says that the printer is not found. Help

  • GetPanelMenuBar() function PROBLEM

    Hello I have to get the ID of the menubar that is associated with a group of experts. The menu bar associated with the Panel is indicated in the control panel interface (.uir: Control Panel-> board settings-> Menu bar). The Committee is loaded into m

  • My B117 mode does not start

    HelloI just bought the TravelMate B117. The Intel Pentium N3700 should lead to a speed of 1, 6 GHz and with mode 2, 4 GHz.After a few tests and benchmarks, I saw that the speed is never greater than 1, 6 GHz.Turbo Boost should be enabled by default,