No sound Win 7 do questions

Similar Questions

• HP Compaq 6370b: Clean partition Win 7 install question

  My first post.

  I have a laptop HP Compaq 6370b, S/N [number of Series edited by Moderator] running Win XP and plan on running a new install for Win 7 Pro 32 bit. I have upgraded the BIOS (as suggested by the forum) at F.20 on 16/12/2014 and reviewed messages on the partition for HP tools. My question is when I format the existing HHD I must add a partition for the HP tools? A response by Dragon fur message leads me to believe that the download and installation of HP tools UEFI create a folder on the operating system drive and I would not require an additional partition.  Thanks for your help.

  Hello

  Should uefi tools be installed on a separate FAT or Fat32 partition to work properly

  When you download and run the UEFI software, the installer will give you the opportunity to automatically create the HP_TOOLS partition (if it does not already exist on the HARD disk) - for more details, see the "Prerequisites" topic on the following link.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3687781&swItemId=ob_129420_1&swEnvOid=4053#TAB4

  Kind regards

  DP - K

• Dell Studio 540 no speakers or headphones Sound - win 10

  My Dell Studio 540 lost out to attached speakers.  I can't tell if the problem is caused by the upgrade to win 10 or if I experienced a motherboard failure a coincidence.  I tried a number of bugs that include uininstalling pilots, roll back drivers and even install Vista drivers original I have original system disks.  Nothing works.

  I see, looking at the acoustic, Panel output HDMI seems to work because I can see where it says sound when playing music.  However, I can't the speakers or headphones of entry to work.  Even if I try the speaker plugs into one of the entrances, the acoustic Panel still shows the headphones or speakers are not connected.

  So, how can I get the systΦme can recognize that speakers have been connected?  Is there another driver I can use.  So far, I've tried several driver Realtek and configurations, does not

  Apologies for the lack of your post. The Studio 540 has never been validated for Windows 10.

  

  My advice is to disable the Realtek HD audio integrated into Bios - Advanced - Integrated Peripherals. Then install a current PCIe x 1 sound card in a PCIe x 1 on the motherboard slots. His current card will provide 10 Windows drivers.

• Win 8 (Pro) - Questions on program files, the desktop icon and taskbar

  Hello

  I just upgraded successfully Win 7 (home) to Win 8 (Pro).

  I have a few questions in mind:

  Q1: A program icon can be PIN to the taskbar and desktop at the same time?

  Q2: Under Win 7, user can easily see all installed programs by clicking on all programs in the Start Menu and select no matter what and copy and paste it on the desktop or PIN to the taskbar task, but under Win 8, I could not find this feature. CAB user to access the program to install all at the same time? Or the user needs to type the name of the program to the search box one by one? How to pin it in the Start Menu Win 8 on the desktop instead?

  Appreciate someone could help me in this area.

  Thank you

  First question: Yes, of course.  You can place an icon where you want. Desktop, taskbar, start screen, at the same time.

  Second Question:

  The start of Windows 8 has a screen view "all programs" similar to the former in Windows 7 (except the new is full screen).  To get her on Windows 8, right click on an empty spot.  If you have Windows 8.1 update, which makes it easier to find by putting an arrow at the bottom of the main screen.

  To take an icon from the start menu or the list of applications and put them on your desktop, right click, choose "Open file location" and then copy / paste the icon on the desktop.

• sound interactive to a question slide

  Hello everyone

  I need to do something really simple

  a multiple choice question

  I need to add a recorded voice that appears only when users click the icon

  as many times as the user needs...

  then they will be able to anwer the question I need...

  for example, in this picture, you can view the two choices

  I need that when users click on the "speaker" icon sound will be played

  (maybe by using this system, I lose the ability to move the answers because the)

  icons with their respective sound will be always in the same place.

  but I'll be able to make sound-question-answer interaction)

  or if some of you have a better option please...

  

  Best regards

  Pedro

  Hello

  If you have the e-Learning suite, Flash, it is a matter of drag-and-drop.

  In CP5 you can add effects yourself (right click on an object, and then choose apply effect), if you explained a bit more what you want like effects.

  I'm just a user like you, nothing more, with a longer experience using Captivate.

  Lilybiri

• Satellite Pro A300 PSAG9E - Win 8 upgrade questions

  I decided to update my old Toshiba Satellite Pro A300 PSAG9E-00700TTE Vista to Windows 8.

  After two tries he has been successful. Vista made me mad, and when I decided to give my son, I wanted to work better.

  Toshiba doesn't seem to be willing to support the old models. (over 3 years).

  I can not even find this model code in the lists, the site does not seem to recognize the serial number.

  This is why all the Windows 8 upgrade tools provided are not relevant.

  I met a few minor problems before, but the Toshiba Turkey never replied messages, even those concerning the new products when I considered buying a new laptop. In the end I went for an Asus, which exceeds my expectations.

  I don't expect all support this time either, because of past experience. But I still want to try one last time.

  Is there a way to get the material in this workbook in Windows 8?

  > Is there a way to get the material in this workbook in Windows 8?

  Satellite Pro A300 is not that win 8 supported means that you will not find to win 8 drivers for this series, but of course, you can use Win 8 on this unit.

  In some cases, the municipality of Win 7 drivers would be compatible.

  Toshiba tools like VAP (value added package) to win 8 can also be used, but we must look for a Win 8 VAP released for other more recent models.

  Touchpad driver can be downloaded from the page of the Synaptics driver also other drivers like LAN or WLan can be found on chip manufacturer pages.

• Bootcamp no sound win 10

  Hello

  Lately, I have installed windows 8.1 on my macbook pro installed osx mavericks 10.9.5 and then I upgraded to 10 using free windows update of windows. The problem is: now in my 10 windows partition, I can't understand how to do his job, nor the apple HFS + read only so my mac partition may appear in windows Explorer. I tried several thing which: run Deputy boocamp of training camp 6 version, did not work, I have also tried to run the program to install drivers for the sound manually (realtek configuration found in the folder of my USB for installation of win8.1 held training camp), but the installer get stuck at installing these so-called realtek drivers. I opened terminal to complete the process to install bootcamp can continue until the end, but not good luck to all. Each time, I check for error on his windows tell me to reboot to make the change take effect, but I've done this several times and still no sound. Now I'm out of ideas. Even in the apple Web site, they said that my model is able to run win10 (macbook pro mid-2012 model, non-retine). Am I missing something? or is the Apple driver did not have any update yet to support windows 10?

  Kind regards

  Simon.

  P.s. I don't know if it's relevant, but to make me choose to start on the mac or windows at startup partition, I installed the boot rEFInd Manager on my macbook.

  The same as the macbook pro md101ch/a el cappitan installed win10.

• Jabra Sound App - import iTunes questions

  I just downloaded Jabra Sound App on my iPhone 6s and opening initially he tries to import iTunes library, but when it is finished there is nothing in the library.

  Can anyone tell how to get this resolved?

  Concerning

  It is probably something you will face with the developer of the app. They take over their app.

• Strange sound behavior... question of Simulator?

  I have an app where I replied the cowbell with their C + c++ demo / .pro files (except my context property is "app") and ImageButtons to call sounds so much like the demo of Bell, I have:

              ImageButton {
                      ...
                  onTouch: {
                      if (event.isDown()) {
                          app.playSound("bark1.wav");
                      }
                  }
              }
  

  It will play a sound, but sometimes my file "bark1.wav" sounds deaf/one time sometimes and other times sounds as it should.  Another similar button, I use the "meow.wav" and no sound at all out.  As a last test, I used the "moo.wav" of the demo, and which works better (less muffled survey / playing each time).  So is this my .wav files? (They all work fine on Windows Media Player)  What is the Simulator?  Thoughts?

  (all the three .wav files attached)

  -Brian

  Same behavior on Simulator and dev alpha.

  Stuart

• No help from the i7 Lenovo Sound win the premium 7 64 home after installing the card TV Hauppauge 2250

  Hauppauge support gave up. They never seemed very interested. TV card has been deleted, but its not returned.  Nothing on the computer that is supposed to produce a sound made.  Video functions on the TV card are fine.  TV card is now back in.

  Thanks for your suggestions

  Ken

  E-mail address is removed from the privacy *.

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Toshiba Satellite with no sound Win 7 HP running

  I have recently upgraded the OS on my Toshiba Satellite from Vista HP SP2 from Win 7 HP.  During the upgrade, I've changed the HARD drive to a SDS-more on this later.  During the successful installation of Win 7 HP-Microsoft really improved the installation process (I remember Windows 3.1 and the sequential insertion without end of the diskettes).  The new system works like a charm EXCEPT waking the computer from sleep.  The noise disappeared.   I've updated;  rolled back;  reinstalled audio drivers to the original manufacturer driver.  Still no positive result.  The only resolution is to reboot which takes all of about 30 seconds with the SDS.  This is not really acceptable since everything I'm getting must be closed/re-opened when the laptop is back.

  I don't mean to change to another manufacturer of the computer, I want to solve this problem.  I'm tenacious, I'm sure that if I'm having problems others are also good too.  We put our collective thinking caps together to solve this problem.

  Hogwash. It is misleading.

  You can use the tab Ccleaner registry with no ill effects. You also have the option to go back IF you have a problem. It is a registry cleaner that IS safe to use. If not, why is it so popular and widely recommended?

  It can also get rid of a lot of scrap surplus registry strings where UN-installers did not fully do their job.

  However, for the Post Op number two is the way to go. Go to the Toshiba website, look for the support page for your machine, download and install the specific audio drivers for W7. If there is none, you can try installing the Vista drivers in compatibility mode - you can get a certain amount of nombreauses.
  See you soon,.
  Jerry

• Satellite L850-1RX - key serial - 8 Win Win 10 update question

  I tried to install Win10 on my Satellite L850-1RX, that I could have downloaded the version WIn10 of Microsoft, but Windows ask me a key to activate the copy and I can't because I find the serial number
  Can you help me?

  I have series Satellite L850 numer

• Win 7 to Win 8 upgrade question.

  I looked around, and I'm pretty confident that the answer is Yes. But double-double check... I have a Win7 32 bit OEM key, when I'll be upgrading of thew Win8 using that key, can I get the 64 bit version?

  See you soon!

  If you get Windows 8 free upgrade program, when you redeem your upgrade of Windows 8, you should have the choice to download 32 or 64-bit of Windows 8.

  Please note that you must do a custom installation, if you are upgrading a Windows 32 version.

• (Redirected) Tower Dell Optiplex 745 win 7 pro question?

  I was asked by a customer to upgrade there Dell Optiplex 745 towers 2

  Dual Core E4400 2.0 GHz

  4 GB of ram

  BIOS is 2.6.6 last I can find

  Xp pro operating system course

  I put in a dell disk 7 pro windows 64-bit and 32-bit in the DVD Rom and it does not start.

  The DVD works I tested it.

  What am I missing here how to start on a different disk, and install the new OS?

  Best of this post in the Forum OS from Microsoft here:

  http://en.community.Dell.com/support-forums/software-OS/f/3524.aspx

  Bev.

• Qosmio G30 - 148 Sound drivers for win XP

  I formatted Qosmio G30-148 and I install Win XP Professional, but I would not find drivers for the sound what I can do?

  You must be kidding man!

  Are you sure that you have checked the site driver Toshiba correctly?
  The Qosmio PQG30E series driver sound Win XP MCE Sigma and the audio Vista driver.
  The MCE version 5.10.4889.0 was released on 20/02/06!

  Everything there!