No sound with Qosmio G30 (PQG32E) on Windows 7 32 bit

Similar Questions

• Qosmio G30 PQG32E - Bootmanager missing

  I'm running a Qosmio G30 PQG32E - a wonderful machine and I'm still waiting for Toshiba to bring out a new model with the same resolution.

  Vista has been installed at the origin of a Raid configuration.
  This was later changed to Windows XP and the disks in JBOD.
  Everything worked well.

  My son has improved the Win7 Professional machine - always very well.
  I took the machine back and installed Kubuntu with the original Vista recovery disc - still very well.
  During the year a lot of unnecessary baggage accumulated - also in the registry.
  I checked the score with TestDisk and found a myriad of old OS - including Vista. So, I did a clean install to clean both discs using DBan.

  I have reinstalled Kubuntu on disk2 intending to install Win7 on disk1.
  Win7 informs me that there is no hard drive - it find external USB drives but not the internal.
  Vista goes in the BSD - probably because the boot.ini is ste for a raid configuration (?).
  I reinstalled the MBR - checked it again with Testdisk and it seems ok.

  No boot manager! No hard drive in diskpart list disk.
  I did bootrec /fixmbr /fixboot /rebuildbcd - no joy.
  The internal hard drive are not and victory starts with C: being a USB key.

  What can I do else? I don't want to not really or need windoze could therefore only lkeave, but it puzzles me and maybe someone can point me in another direction.

  Yes, I downloaded the latest driver (TC0017000B.exe) raid but cannot run it because it is on USB and when running, it tells me that WBDHD44I.dll is missing.

  > Win7 informs me that there is no hard drive - it find external USB drives but not the internal.
  > Internal hard drive are not and victory starts with C: a USB key.

  Looks a bit like a HARD disk failure
  The HARD drive is visible in the BIOS?

  Check the HARD drive using freeware like Drive Fitness Test tool. The bootable disc would check the fitness of HARD drive and if the HARD drive is faulty, you will get an error.

  By the way: the TC0017000B.exe can be decompressed. If you unpack this package, you will get the files WBDHD44I. DLL, WBTOS45I. DLL and sys files.
  I recommend you move these package unpacked on USB key to add the RAID driver during the installation of Win 7.

• Qosmio G30 - installation of Windows 7

  Hello

  I recently installed Windows 7 on my Qosmio G30 (w / HD-DVD). Having noticed that some people have had problems with it, I decided to post my procedure.

  My Qosmio has 2 hard drives with XP MCE installed on the primary. The RAID settings are 1RAID0 and JBOD. I decided to install Windows 7 on the second disc of HARD to dual boot with XP.

  1. upgrade the BIOS to 3.90
  2 put the Toshiba RAID for Vista (version 1.10.0016) drivers on a USB key.
  3. use the Win7 DVD to portable computer startup in the installation program, it's better than the installer of in Windows XP/Vista.
  4 load the RAID during the installation drivers to use hard drives (click on "Load driver").
  5. install Win7.
  6 install Windows Update and let it download the necessary drivers.

  You may need to manually install the drivers for Bluetooth and video Capture card.

  The upgrade process went smooth every thing takes less than 2 hours.

  Note that the Windows 7 installer does not recursively for the RAID drivers search, you must select the folder holding the KR10N. INF file in the location of the RAID driver.

  Hope this helps someone.

  Hey mate,

  Thank you for this very interesting and nice post! :)

  I don t Qosmio G30 but I think it could be very useful for other users here. I love reading such display.

  I installed Windows 7 on my Qosmio F50 and I m satisfied also again Windows 7. You too?

• Qosmio G30 (PQG31E) - reinstall Windows from the original disc

  I bought my Qosmio several years back, and I think not, it is still covered by any warranty.

  Recently, my system files on the hard drive of Windows (C :) has been corrupted (or the hard drive has bad sectors; whatever), and chkdsc crashes when I'm trying to fix it.) I would like to reinstall Windows, however, when you start resuscitation DVD, the installation will stop with the following error message:
  "Error: setenv file x:\setenv.ini or x:\tools\setenv.ini not found".

  Indeed, the file doesn't seem to be present, when you look at the filesystem x:\ from the console. However, it is present when viewing the Windows DVD.

  I found after help here: http://aps2.toshiba-tro.de/kb0/TSB0302U10000R01.htm, however, bios of Qosmio is not as bios of the Satellite. I can't find the settings provided.

  How to fix this error in Qosmio?

  Qosmio G30 is old laptop model, and may not be covered by the standard warranty. He's too old.

  This Toshiba document, which describes certain problem more recent Satellite L500D Pro and Satellite L550D Pro, has nothing to do with your old laptop Qosmio.

  I also believe that the HARD drive can be troublemaker to verify HARD drive using different tools and following the advice of s of Akuma.

• Virus or a technical problem with Qosmio G30?

  My laptop is Qosmio G30-149. When I turm to YOU, I see that the screen is not 100% black, but it has some small little clear white points. When Windows logo to come, the entire screen has 10 white vertical lines (each line manufactured with something similar to the sign!), then calculate get frozen and encoding becomes dark. ID, I run Windows in safe mode, then it is OK. What is - this: Virus or a technical problem? My Norman antivirus software reports any problems with viruses. Help, please!

  Looks like a hardware problem, and in this case that it cannot be solved by a laptop user simply common.
  For the most part a defective part needs to be replaced.

  The G30 seems to be a new series and the guarantee to be valid.
  SO, don t waste time and communicate with the technicians of the ASP.

  Good luck

• Qosmio G30-163: encoder Windows media does not recognize video devices

  I can't get the Windows media encoder to recognize my video camera connected to the S-video (Qosmio G30-163) port.

  I have a similar problem with Web conferencing pro application Marratech (it crashes after 15-20 seconds if I try to use it-during the time the application is inactive - in configuration I see the photo/video test).

  If I use InterVideo® WinDVD Creator 2 Platinum software packaged for video capture it works fine.

  Hello

  In my opinion there would be something wrong with the compatibility of the MCE and s-video. Have you tried to run the MCE updates?
  If the s-video connection works with InterVideo WinDVD Creator, then I guess there is no hardware malfunction (s-video port).

  How about the video and the port? Have you checked if it works?
  This port allows you to import video data from analog video camera.
  I recommend you this option

• How to connect a satellite with Qosmio G30-188 receiver?

  Hello!

  How can I connect a satellite receiver to my Qosmio g30-188? I need to connect the AV signal (SCART) on the receiver to the laptop.
  can someone help me?

  Thanks in advance!

  Hello

  I didn't test it with cable SCART, but I presume that you need adapter SCART to connect to your satellite receiver. Here is the image what it looks like.

  On this map, you can connect S-video cable to transfer the picture to your Qosmio. You will find on the right side for laptop S-video PORT. For sound, you can use the audio cable (red/white) with proper adapter

  As I said I n t test it until now. In any case please check manuals s user document. Maybe, you can find some useful information.

• Sound on Qosmio G30-140 problem

  I have the sound problem. I formatted my laptop and everything was fine, but the sound does not work.
  I checked all noise related in my laptop, it was beautiful, but the sound does not work.
  I downloaded the sound on the net and also the sound still not working!

  How can I solve this problem?
  My laptop model is Toshiba Qosmio G30-140

  > I formatted my laptop and everything was fine...
  This means that you have installed the operating system using the original facilities Toshiba disc?
  Sound card recognized and listed correctly in the Device Manager?
  Make sure that the MUTE option is NOT selected.
  Make sure that the volume level is not set to the minimum level.

• Qosmio G30 - upgrade to Windows 7 and better hard disks

  Hello world

  That's what we all want, right...

  I have a G30 - 182, Windows Vista 32-bit. An external HHD, DW 1 TB. Now 3 years and for some serious upgrade.

  I love the G30's big screen and very nice, as a photographer, I find the graphics excellent and accurate. One of the drawbacks is the primary HHD speed I can say. Performance index Windows says 4.2 which is totally unacceptable in 2010.

  So what to do?

  I just upgraded the RAM to 2 x 2 GB Kingston HyperX, which has given a huge boost. The specs are product code: KHX5300S2LLK2 / 4G DDR2 SDRAM, time 4-4-4-12, CL 4, 667 MHz, SO DIMM 200 pin, 1.8 V. The price is right, and I guess that's better than the RAM original Toshiba which is of older date. Of course, I encourage everyone to do the same.

  So what's next. I think that an upgrade to Windows 7. I think there are so many guidelines in this forum, I expect a lot of trouble here.

  But how about a couple of new HHDs? Can anyone advice me on this point, please.

  I would like a bigger and faster HHDs maybe. It will be a good choice: 2 X Toshiba MK5055GSX - hard drive - 500 GB - serial SATA 300 - tranferrate 300 Mbps - buffer 8 MB in size.

  -but then comes the installation, huh... I have no idea.

  concerning
  Fresnell
  CPH

  Hey Buddy,

  > Performance index Windows says 4.2 which is totally unacceptable in 2010.
  Who said that this index is totally unacceptable in 2010?
  As far as I know the highest score you can get on Vista is 5.0 so I think that your result is good and is not a reason to do a hardware upgrade.
  In addition these benchmarks aren't important. If I m happy with my laptop and it s fast enough for me, everything is ok and I don't need no reference results.

  In any case, new 500 GB HDDs should be a bit faster because they have a higher density of the date. This means that everything can be loaded slightly faster.
  I put t know the exact details of these drives but if you really want some fast hard disks, you should buy one with 7200 RPM. They produce heat a little more and need more power, but access time is lower than on 5400 RPM.

  In the best cases, you buy an SSD for the OS, programs and a 500 GB model for your data/photos. That of the best performance gain.

  Finally, and especially if you can get all the drivers and tools for Windows 7, you can check here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Some problems with Qosmio G30-179 - remote and TV

  Hello, (I am French and my English is bad)

  I have a Qosmio G30-179 and I can't use my remote when the computer's power on. But I can use the remote to turn on my computer and I can use it when I use the TV and media keys (on the right of the power button).

  Another problem: I get nothing when I search for a signal TV on Media player. Even if I'm in a place where I already receive all TV channels. Maybe they had some problems undetected...

  All these functions have already worked and I realized that they do not work there is little time. But I don't use them for a long time, since I have received my computer, when he came back guaranteed (I send them because he had a problem in the bars of RAM.)

  Then, I think that there was a problem with the service. But I'm not sure.

  What do you think about this? Should I call them?
  Or this problem can be easily resolved?
  Thank you in advance.

  In this case, it is really not easy to give advice quite simply. If you are looking for the simplest solution I recommend you save all your data and install OS using recovery DVDs. After that make this laptop will have factory again and I hope that it will work as before.

  Good bye

• No sound with everything don't dumb windows 7

  I have windows 7 sound worked yesterday and everything is always reactivated and now the sound dosnt work

  I have windows 7 sound worked yesterday and everything is always reactivated and now the sound dosnt work

  Use system restore and go back to a time before the problem appeared.
   
  If the problem persists - look for reasons other than the software - since you would have eliminated software problems using System Restore to return to a time before the problem started.

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I already worked with the macro recorder in Windows 95 (32 bit), now I want to do it on a 64 bit system.

  I already update the Win32Hlp but not the recorder.exe and recorder.dll because I have not found where to update. Is it posible to get a new program which look like?

  Hello

  In previous versions of Windows, you can save macros using the recorder for Windows macros, 32 - bit old. Now, you need a third-party utility.
  You can search for commercial 3rd online party by using your favorite search engine.

  PARTY SOFTWARE WARNING: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Diana
  Microsoft Answers Support Engineer

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Qosmio G30 - need two Windows operating systems: Vista and XP

  Hello

  can someone help me on the following application procedures:
  I need two operating systems on my Qosmio: Vista and XP
  I have two drives RAID inside my Qosmio and I installed Vista on the first.

  I tried to install XP on the second hard drive and I did (I have inserted XP installation disk and sellected second disc for installation), but after installation I got just the XP startup option.

  I can see all the files of Vista on the first disc, but allows boot XP only. Directory Windows XP was intalled on second drive, but boot.ini and some system files have been at the root of the first disc.

  I liked Vista and I repeated the procedure (with my recovery CD of Vista) and now I have Vista on the first disc and all files of XP on the second disc. I do not study how to get full XP on the second disk bootable system.

  What I need:
  Vista on the first hard drive.
  XP on the second disk

  I would have completely independent Windows System. This means that I have to start selection of BIOS, not Vista or XP.

  Hello

  It's very strange. If you have installed the first Vista and XP as a second OS then the Vista boot manager must exist usually.

  Please note that Vista uses 2 partitions. A partition is not visible. I hope that you have installed XP on this partition.

  In any case, I recommend you to create a new partition on the first HARD drive and you could install XP as second operating system.

  After this installation, you can use applications freeware like EasyBCD or VistaBootPRO to change the Vista Boot Manager.

• Qosmio G30: Cannot install Windows 7 due to lack of RAID driver

  Hello

  I tried to install Win 7 Home Premium in G30 under Win XP (Media Edition) without success.
  The issue is driver Toshiba Raid is missing.

  I have since then download and install the new drivers (V1.10.0016).
  Always Win 7 update s/w has no overprint.

  Everyone properly upgraded operating system?
  Thank you.

  Oz Toshi

  > Has anyone successfully upgraded the operating system?
  Have you read some precedents here packed in the Qosmio G forum?

  For example like this:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=48489

  You can use the RAID of Vista driver to install Win 7.
  Its working properly as it was mentioned in the other thread.