No sound with some applications

Similar Questions

• Why I get so much ball of color with some applications

  Hi, I got an iMac old mid 2010 27 "with a processor i7 and 8 GB of memory. I got a lot and long color ball (beach ball) with many applications.

  I bought a new iMac 21 "(fin novembre) with the highest CPU available i7, 16 GB of memory and 256 storage Solid State." So, I thought: bye bye to the beach ball, but this is not the case. If I saw only, Safari and Adobe Muse (in sleep mode and I start Contact (my contact book), for example and I'm going to edit mode to edit a contact, it takes a few seconds with the ball of color to enter edit mode, if I change anything in a contact, then the colored ball is there for about 6 or 7 seconds.) If I make a change without Muse in standby mode, it is almost instantly change anything in contact and get out.

  Is this normal? Even when the Muse or large applications are in mode sleep or just simply presents? Even if I do not use Muse while I do something else? They have a lot of memory and the processor is "bored" because there is nothing happens. :-) Is there a system setting that I should change? Thank you.

  There is probably something in your user account that is the cause. It is NOT normal.

  There are a few simple things that you can try:

  1) starts in Mode safe. Then start normally. Note: your mac is supposed to be slower in Mode without failure, but in your case, it might actually be faster.

  After you restart normally, you will find that your mac is now ok. If so, this means that a corrupt cache caused trouble and now everything is fine.

  Otherwise:

  (2) create a new user account and use this account for a while. You can see that there is no beach balls. If so, the problem is specific to your user account.

  (3) download Etrecheck, run it from your normal user account and post the report here.

• Question of IDT Sound for SOME applications. HPE h8 - 1380t win 8

  Hello, I recently bought a

  HP Pavilion HPE h8 - 1380t CTO desktop computer.

  My high def IDT codec plays pretty much all applications very well. But I have one application, client of Poker of Bovada, the noise ceased to come thru. I'm under WIn 8 64-bit Pro and I loaded the latest version of the driver. That fixed the issue for a day then the problem came back! What would cause that an app not sound? Indicators of volume in the sound mixer fader shows the sound creation application and the potentiometer main system providing sound, but I get nothing. Spotify and itunes and all the other apps as well as prompts system sound fine simultaneously while applying Bovada is silent. (Bovada) they know nothing to cause this and say if mixer audio fader shows her, I should hear it and believe it's a matter of winning 8 or HP somehow? !! ?? Help, please! Thanks in advance for any help!

  Peace,

  Finally problem solved it by downloading the new driver from HP. The driver that Windows 8 will find and install DOES NOT WORK on my machine. The HP works perfectly!

• I recently installed Firefox 10 but it is not compatible with some application that I have to work. I need to get back to 9 Firefox. Where can I find to download? in English

  I recently installed Firefox 10 but it is not compatible with a client app, that I have to work. I need to get back to 9 Firefox. Where can I find to download?
  I'm working on a laptop Packard Bell with XP.
  Thank you.

  [email protected]

  Hey wordsontime,

  There are many benefits to the latest version of Firefox. You may want to consider the old version running on a USB key with PortableApps. This way you will always be able to run the latest version for your daily activities.

  If you want to roll back to a previous version of Firefox, just take a glance section of the Knowledge Base install an older version of Firefox.

  Hope this helps!

• questions to alt tab with some applications

  It's really a question of two parts:

  Application 1: version of Office Internet Explore (1 or more tablets, 1 or more windows).

  Application 2: steam (steam main window, steam client chat [optionally]).

  When alt tabbing in IE-> steam works as expected.

  However, when alt tab in the main window of steam is to the last position right before the "desktop" and not the first. Pretty frustrating.

  If you open the main window and instant messaging client this does not happen on the steam chat client - sometimes, othertimes it does.

  It appears when the steam main window is closed and then reopened, sometimes both - but if the main window is opened first, then the IM client, it won't happen on the instant messaging client.

  Seems pretty random when it happens and if you open another application the problem disappears for a while - generally I see when opening of Netflix, steam + chat client and no other applications.

  Has anyone else seen similar behavior or found a potential solution?

  In addition, in win 7 there was no way to leave native alt tab features and just delete the entry "desktop" in the alt tab / windows tab (except the key "reg" to return to the menu older alt - tab style).

  It is not that it can remove all leaving the normal alt tab win 8? That admission has always been a very great pain, esp since you can simply mouse over the lower right or use win + M to get the same results.

  I'm wondering for months why Steam was having this behavior, yet no one I talked to that had the same problem. Thank you for alerting me to the fact that it is a modern application problem. I'm usually the Mail app open in the background, so I always had this Alt + Tab behavior for a long time and thought it was quite a problem for Steam client.

• Some applications won't work in Safe Mode

  Hello world

  I had a few problems with some applications for these past few weeks, they will start only when I'm in Mode safe. It's always the same applications, which include Spotify, Atom.io and website via Safari maps.google.com. I suppose that there is something that share these apps that don't deprive them start when I start my MacBook in normal mode.

  Things I've tried:

  -Reinstalled El Capitan, to the latest version

  -HDD completely wiped and reinstalled El Capitan

  -Delivered PRAM reset

  -SMC awarded zero

  None of these actions have worked unfortunately. What could be wrong here? Is there a hardware error?

  Kind regards

  Niels

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Cannot scroll with the scroll on my mouse button in some Applications

  How do I can't scroll with the scroll on my mouse button in some applications? Happen for example when I tried to scroll my Lotus Notes e-mail messages. I was not able to scroll using the button on my mouse! Very annoying!

  Hi X04p2n! I had the same problem! I was not able to scroll with the scroll thing (dunno what it's called) in note either. Just, I went on the site and downloaded the correct drivers for my mouse and it works since.

• my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  my iPhone 6s has problems with the GPS when I use some applications, it does not work well and give especially the bad road. Can someone help me?

  My iphone 6 has started having the same problem. Its literally the GPS. Saying that it does not find me at all. Ive seen say location for more than an hour in the suburbs of chicago. It started to happen to me after I downloaded the latest update for the iphone. I hope they react and let you know what is happening because I'm dying to know as well.

• BlackBerry smartphones some application only works with WiFi

  Hello everyone

  recently, I bought the torch 9800. There are some applications work only when I connect to the internet wireless such as facebook, app world, which is app. I tried a lot of different ways to solve this problem, but I couldn't.

  Can someone help me with this question. Appreciate your kind revert.

  Aloui, in the 'My business' section in your profile, you wrote "torch 9800". Who is your BlackBerry model, not your operator, your mobile operator.

  Do you have a data Plan BlackBerry enabled on your account with your carrier or mobile provider?

  You have to, to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

  Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

  Good luck.

• I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  I have a desktop version independent of PS6 - if I download some desktop PS CC application will be this result in all conflicts with both applications on the same desktop computer?

  Hello

  Yes both licenses will be in conflict and it will activate CS6 with creative cloud.

  You can only use a license on a computer and you can also download the previous version of the creative cloud.

  Concerning

  Gilles marneffe

• Application mapping Reporting fail with some members of the smart list

  I encourage with the application of the "Reporting function of map of planning" to map the dimensions of bso to aso cubes. Smart OSB list GET mapped to a dimension in aso by using Smart List for mapping Dimension type.
  
  We receive error while pushing data to ASO reporting application. The error is
  
  Jump Smartlist (NumericToSmartList2Transformer (XXX(name of smart list), Missing Label not defined list.
  
  Please help me
  
  Thank you

  842804,

  You can also find my answer on network 54. So now you have to divergant conversatoins on the same subject. It is advisable to display in one place.

  Kind regards

  John A. Booth
  http://www.metavero.com

• Some applications (Soundcloud, YouTube, Tumblr and Instagram) are not to say that I have a wifi connection when I clearly one. Why is this and how do I solve this problem?

  As I said, some applications are not I have an Internet connection when I do really. YouTube and Instagram both of my loading workflow error messages, Tumblr went to appear in messages on my dashboard at least a week to not show anything on my dashboard and Soundcloud would not load completely. I tried to reset all my default network connections and had to redownload all apps - but who does more, and now I'm stuck being connected on all of them (with the exception of YouTube, which is back to square one (I think)). We are dealing with issues with low storage because of the cloud is all messed up, so maybe she's the one, but I'm not sure. Anyone could try to guide me through fixing this? Thank you

  Hey there dubstepspacecatjr,

  Welcome to the communities of Apple Support! From the sound of things, you experience problems connecting to the internet in specific applications on your iPod touch, such as YouTube and Instagram. You also tried to reset the network settings and reinstall applications, which are key steps in troubleshooting. I can certainly understand the importance of being able to access the internet in order to get most of these applications. I'll be happy to take a look at it with you.

  The first place wherever I would like to first of all is the use of this article:

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  https://support.Apple.com/en-us/HT204051

  If you haven't already done so, good insulation should see if this connection within these apps problem persists when you use cellular data. In addition, check that you are able to browse and connect to Safari on your iPod.

  In addition, you do not want to look at the backup and restore of your iPod as a new device. From there, you can reinstall the applications and see if the same thing happens. This will help to rule out existing issues/corruption of software.

  The following items have the steps on how to create a backup in progress, but also to restore your device to factory settings:

  How to back up your device using iCloud or iTunes

  https://support.Apple.com/en-us/HT203977

  How to clear your iOS device and then set up as a new device or restore from backups

  https://support.Apple.com/en-us/HT204686

  Have a great rest of your day!

• Some applications does not respond after sleep (El Capitan)

  Product: 13 '' Macbook Pro retina (12.1) (base model sheet)

  El Capitan Version: 10.11.6

  The problem:

  When I connect after that my Macbook went down, I often have problems with some of the stock apps. In particular, I had this problem with the Mail Messages, reminders and calendar. This seems to be a problem when they are open before putting the macbook to sleep. This same problem happened with non-apple-stock applications.

  Once logged in, if I click on the application icon, the application window will come into focus. After that, I'm unable to use the application (as if frozen) and I often just see the spinning Rainbow mouse icon.

  Can I force quit the app and then open it again, but now the application does not load.

  To solve the problem, I can restart the macbook and all is well.

  Some others probably associated with funny things I saw (only attracted to this once... but did not look at one time or another):

  I open the calendar application after the macbook was sleeping and my full general calendar was empty (which would be nice if it were true!). In any case, I checked the 'accounts' and also found that there was no accounts! (I have 3 goes). So I wonder if there is a problem with the accounts after sleep since these apps I've had problems with all iCloud account and mail also uses some other accounts.

  Big Question: Is there something I can do to make that happen?

  Thank you very much for your help! Sorry if this is a double post, it is difficult to find an answer via google search.

  Start Safe Mode removes the system caches that can help...

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then try to Message, Mail, etc.

  If you still have problems, check the startup disk.

  Launch the disk utility located in/Applications/Utilities

  Then select the disk to boot on the left and then select the first aid tab and then click run.

• 19BL502B2 no sound with HDMI

  I recently bought a new TV: Toshiba 19BL502B2.
  When I connect to my computer via HDMI, I get the picture, but no sound.
  Some tests I've done:
  (1) control Panel-> Sound-> right click on the device-> Test: "could not play the tune test.
  (2) computer connected to another TV: works very well
  (3) connected to a different computer for this TV: works very well

  My display driver and audio driver are updated
  The TV firmware is up-to-date.

  Anything else I can do?

  I presume that this Toshiba TV has only one HDMI port that allows to connect external devices. Generally avoid any problems when you connect external devices like PC/laptop, DVD. Player BD or some sat-receiver.

  Unfortunately, I can't tell what can be wrong with that but if possible check if there is a problem with the HDMI port in general. I can't imagine, but what you can try is to connect another device to the HDMI port.

  I assume that you have a DVD or BD player. Please, connect it to the HDMI port and test if everything works OK.
  From time to time I use my laptop with my LCD TV (not Toshiba one) and it is unclear to me that you must activate something on TV to get its HDMI port.

  Please test and send feedback.

• Satellite U920T - sound with headphones quiet and distorted

  Hello

  I have the following problem with my U920T. The sound with built-in speakers is perfect, but if I use headphones, the sound is very quiet almost unhearable.
  I tested several helmets und different settings of the software. I also tried to install all Windowsupdates and driver updates the BIOS including Toshiba homepage n realtek drivers.
  Now, I have reinstalled Windows but the problem persists.
  I still think is a driver issue, but have no idea what to do now.

  I hope for quick help

  cordially 7even

  That s really strange, but I think that there is problem with some incorrect settings.
  I don't know how do you test your helmet but make some tests with browser player.
  Open Internet Explorer, open the test page. Start, for example, my favorite In the Mix radio click with the left button of the mouse on the "speaker" icon and open the option when running music mixer.
  Your IE it will appear there. You can move the volume level for speakers but for IE too.
  Two of them on the 50% and check if the problem persists.

  I use headphones often enough but I've never noticed this problem.
  Please test and send feedback.