No speakers detected on Equium A60?

Similar Questions

• Equium A60-155, don't 'sees' new HARD drive

  I have an old Equium A60-155, P5A67E and tried to install a new drive hard - one Samsung 120 GB, 5400 RPM IDE.
  However the BIOS (ver 1.90) is not 'see' and has no auto-detection option I see either - in fact it has very few options for anyone!

  The existing drive (original) is a Fujitsu 40 GB IDE.

  The 120 GB should be not OK, below the barrier of 128 Gb? - but would be using a suitable HARD drive utility (-Samsung offers a version of OnTrack) to make the drive HARD smaller 'look' for the Bios, be any help anyway? Is that the new drive faulty? Any other ideas?

  Any help is appreciated!

  I agree with you and think that 120 GB should be recognized correctly. It is not easy to say what the problem is here. BIOPS value default settings and check again. If the same problem persists, try using a different HDD with 80 or 100 GB to see if any of them will be recognized correctly.

  Problem is that you have limited options with all this and that he cannot do much. Either it is admitted or not.

• Equium A60: graphics issues and more

  Ive had so many probs with tis equium a60. It was overheating, stand by was not working and now the graffics were spoil! I rang this place recommended pcworld n they said try to format (large). anyway I restored it to factory settings while he was exactly as it was when I got it. stand is now working properly :) but it still is overheating (I mean really, it becomes it hot) and the graffics are always spoil.
  What happens is the screen freezes for a few seconds, then he goes the worst possible of display settings, so everything is massive and the colors are all wrong. and a pop up in windows as a encountered an error please reboot.
  This happens only at random times, I do not understand why ive formatted. I don't know if the card graffics itself is exhausted. any help or ideas appreciated. see you soon

  Hi Dave,.

  I think he should assume that your problems stem from overheating. It is very common for the dust and debris to form and block the passage of air through the CPU cooler. I suggest trying to remove such an accumulation or blowing into the heatsink (towards the cooling fans), or by sucking debris with a household vacuum. If all else fails, then you can remove the heat sink and the dust before replaceing it. Beware that this may invalidate your warranty.

  Normally a thermal trigger remove power if it detects the CPU heat too, but this does not mean that other problems cannot occur.

  If you still have problems with you appear after you have addressed the issue of overheating then please post again.

  HTH

• Internet connection and Equium A60

  Hello!
  A few months ago, I bought a Toshiba Equium A60. I could never use the modem to connect to the internet via my BT phone line, but the jacket LAN worked well and I plugged my laptop on the net in my workplace. Sudenly it has stopped working, and after the computer went twice to a Toshiba repair center and after reinstalled the system twice and after doing everything that has been said to do to the Toshiba help line, nor the modem or LAN jacket works.

  For the modem, troubleshooting says that maybe there is a problem in COM1 and that I should reinstall the system (what I did) and for the local network, it always says that there is no cable connected (I tried 2 different cables and 2 Sockets for connecting different!).

  I also tried a USB modem and it does not work! Can someone help me? Or my laptop always uses smoke signals to communicate to the world?

  Hello

  In my opinion, you should try to remove the two components of the Device Manager, and then restart the device. The new hardware components should be detected and installed correctly. If there is no success, this is obviously some malfunction of the equipment.

  If you connect the LAN cable to your laptop, it must there have enabled the small green light contact and if there is a transfer of data that the orange indicator light should also be activated and flashing. If you connect the LAN cable is it green light turned on? If this isn't the case, you should speak also to the network administrator to check if the socket you are using is properly enabled.

• Must disable Touchpad tapping Equium A60-173

  OK, so my father, I bought a laptop a few years and now it has forwarded to me. I am wanting to turn off tapping it on the button, but I can't find an option to do so.
  I installed a new copy of Windows XP Pro, so there may be some missing drivers that come on the recovery CD.
  I tried to find all the drivers, but I can't find my notebook anywhere. I ran the Toshiba program that is supposed to detect what laptop you have, but it came with nothing when I ran it and I also searched in the drivers on the Toshiba site section, but my laptop does not even appear in the choice of laptops.

  It is a Toshiba Equium and on the back, he said Equium A60-173 and the model number is PSA67E-00700C8J.

  So, if someone can tell me please how to disable the tapping on the touch pad that would be great. I can't disable the touchpad entirely because of course I want to control the mouse pointer.

  I saw a post that said to press Fn and F9, but has nothing, probably because I don't have the correct drivers installed.

  Any help would be great.

  Hey Buddy,

  The touchpad tapping function can be disabled in the options of the touchpad driver. FN + F9 key combination to disable the touchpad together so it s another function.

  The tapping function can be disabled if the touchpad drivers are installed. If you install Windows on a normal disc from Microsoft no drivers are installed and everything you need to install yourself. If you are using the Toshiba recovery that all disk drivers and tools are installed automatically because it contains a picture of the factory settings. Recovery disk is more comfortable.

  All the drivers and tools you need now can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers
  * Archive * > Equium > Equium A60 > PSA67E

  As you can see you only need to search the Archives to find the drivers ;)

• Equium A60 - DVD player does not read the data disks

  Hello

  I'm having a problem with my DVD drive on my laptop Toshiba Equium A60. The DVD drive (Pioneer DVD - RW DVR-K13A) will play store bought movies etc. without problem. He will also read a blank DVD when you put it in the drive, but once the information/data are on the disc, it won t detect the drive.

  I'm not really good with computer so any help would be grateful. The computer used for any play he stopped just do a few months back.

  Many thanks, Phil

  Hello Phil

  It is not easy to find explanations for these issues. What you can try is to create own data CD and check if the drive can read. I recommend buying a blank DVD-R from TDK. Over the past 7 years I never had no problem read/write TDK media.

  Media that cannot be read properly? Is - this DVD-R, DVD - RW, DVD + R or a DVD + RW?
  Please give us more information.

• What DVD players are compatible with Equium A60 PSA67E?

  my question; What dvd players are compatible for an equium a60 (psa67e-001001en)?

  background; I did a very stupid thing! while I was at the Japan and about 18 months after buying my a60 in the United Kingdom, the packaged dvd player. I replaced it with a teac dvd player and it worked like a dream! I threw the old disk (I think it was a matsu * has, but can't remember the exact model). in any case, I came home and had a little time on my hands, so I decided to set my machine and corrupted the windows xp registry.

  Now, windows xp runs in the loop, I can't access and I need to wipe the hard drive and start again essentially. I put the recovery disk in, but the computer doesn't read him and desperately wants his wacky way to windows. I believe that it is not recognizing the teac drive that I used to replace the old. I think that if I put an original return type, the firmware can recognize the drive and I'll be back in business... or so I hope!

  of course, all the other tips would be welcome too! Thank you.

  work around? PS a work around, I thought so... copy the contents of the diskette of recovery on a hard drive (using my old computer) can change the current hard drive in my a60 with it... theory; When the computer detects the content during the start-up, it will install xp on another part of this drive and I have a working machine once again. could - this something like this work? any thoughts?

  Post edited by: markchev66

  Hello

  Did you look in the manual of the user who is usually preinstalled on your laptop?
  There you should find information.

  I found these:
  Toshiba SD-C2612
  Toshiba SD-R6332
  Matsu * a UJ-811BTJA-A
  Matsu * a UJDA760
  Pioneer DVR-K13TBA
  Toshiba SD-R2512
  TEAC DW-224TH

  It is only a part of the list mentioned in the manual. Check it!

• Problem connecting to a printer USB to Equium A60

  I tried to connect a USB printer, Photosmart C3180, to my laptop Toshiba Equium A60 model but when I load the software and follow the instructions it seems to load correctly, then at the end the following error message appears "specified Port unknown".

  I tried everything the printer manufacturing suggested and even downloaded the latest Toshiba BIOS updates, but this still does not work. The PC detects new hardware but won't install it.

  I tried with another USB printer and the same message appeared.
  Any ideas?

  Hello

  It seems that the printer port name specified does not exist on your computer.
  You must use the Print Manager to see the current list of ports, you can print and use one of these.

• Drive recovery for Equium A60-157 PSA67E

  Has anyone got a copy of the disc recovery issued with an equium A60-157 PSA67E as I am trying to get this laptop for work and unable to get its hotkeys control and be able to work.

  I think I've worn out my wellcome with Equium forum and technical appeal but it's somewhere I myself lack of understanding on this subject.

  I loaded all recent downloads listed on their site, but always impossible to get these functions to work.

  So can you help me please...

  David

  Hello

  Why you n t install a new Windows OS on this laptop?
  Missing drivers can be downloaded from the page of European driver of Toshiba.
  All drivers are available!

  The recovery disc can be ordered for this model of laptop because it s too old.
  Clean install OS Win + drivers is therefore the only option

• System failure-Equium A60 won't boot to the top

  Hey guys & gals
  for the first time using this site and need some advice!

  I have a toshiba laptop
  "equium a60 model PSA67E-No.-00200D8J.

  Ive had problems with my start up! I get an error message saying: I have a missing driver!

  read the MSG error-"system32\drivers\ntfs.sys".

  Also get message...

  "windows was not start because the following file is missing or damaged:
  system32\DRIVERS\isapnp.sys ".

  Unfortunately I can't find my original CD boot disk & I don't want to lose the files saved... not too good sense when it comes to problems with this...

  If anyone can give some advice please, it drives me crazy! Laughing out loud

  Alan.

  Heyho,

  looks like you're in big trouble. I think the only chance to backup your files is to get some linux live CD (knoppix, ubuntu and mandrake) and an external hard drive to copy the files to your hard drive internal to external hard drive attached.

  The best way would be to ask a technician or a guy who is VERY familiar with computers to backup your data.

  After that you need to reinstall your operating system but without the recovery CD, you are out of luck. Then you don't have a lot of options.
  One of these options is to look for startup disk or how to call it: "restore CD". If it is not available you should contact an authorized local dealer servicepartner toshiba and get a new recovery disk. The last option is to buy a Windows XP or to ask someone (family, friends, the one who) for a Windows XP to install.

  Greetings

• Equium A60 - missing or corrupt ntfs.sys, please run the installation program

  When starting my Equium A60 I get the answer "ntfs.sys missing or damaged please run.

  When I run the toshiba recovery still disc, it does not cure it and I tried to boot from xp cd and it says no bootable cd in the device.

  I remember that this issue has already been discussed in different threads here in the forum.
  Why you n t use the advanced search option?

  OK I did and found these two threads:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24051

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24292

  I would be grateful for feedback!

  Greetings

• Equium A60: XP blue screen of death: Stop: c000021a - fatal error message

  "Stop: c000021a {fatal system error} the Session manager initialization system.
  ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000). The system has been shut down. »

  This is the message I get on a blue screen. I can't start the computer. His tent to restart conineously after this error message. What could be wrong someone can help.

  my system is equium A60, running on windows xp sp2 installed very recently.

  Thanks in advance.

  You should check the support microsoft help you dosent his good companion
  This, you should get started http://support.microsoft.com/kb/317189

• Failed to load money microsoft on Equium A60

  Hello. I have an equium A60 and when I try to install microsoft money, it says that it cannot operate while the toshiba keyboard shortcut properties are running! How can I activate the shortcut keys off (not that I want to do), but, if not, how can I get setup! Any suggestions greatly appreciated!

  Please see this topic that has been placed in this forum there is a little time ;)

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=1476

  I think this should help you.
  Please post again if it will work.

• Equium A60-191: number of Modem - only an analog phone lines are supported

  My Equium A60 has been turned on when lightning struck nearby and caused the power supply turn off and turn back on.

  The OS is XP Home and my ISP is AOL. When I try to access the Net with DUN, I get the repeated error message:

  "Connected phone line is not compatible with this modem. Only analog phone lines are supported. »

  My desktop computer, which also uses AOL, always connects to the same phone line with no problems.

  I restarted the A60 several times; changed and I tried the 2 phone connection cables - both work; the phone line works very well; I reinstalled the driver provided on this site; removed the tick from the box that says to wait for the telephone line; verified that the modem is working and on the Device Manager list. All this is in vain.

  Convenience store suggests that COM 3 is not enabled. I don't see that com 3 listed in the device under Ports Manager.

  I tried Google and ASK with the error message. There is not a lot of posts, and it seems that the Toshiba modem is actually an Agere. This fact seems to be the object of some of the complaints.

  Finally, I uninstalled the driver/modem, AOL and another DUN connection. I restarted and went through the process of installing AOL and "new hardware". While the modem is on and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial a number on which it generates error 680. It does this even when the box is unchecked, to wait for a dial tone.

  I would be very grateful if someone could help it. I'm out of ideas.

  Thank you very much.

  Hello

  You are right, the modem supports the Modem Agere chip.
  You won't find the COM3 in the Device Manager for the modem uses a non-real com port. It s virtual com port.

  I think you should start the diagnostic tool test and check if the Modem has no malfunction.
  Additional you must remove the connection in the region Select utility and after restarting again create a new.

  I also found useful Microsoft article on troubleshooting network and dial-up connections.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/trouble_all.mspx?mfr=true

  and you'll find info on the error of DUNS 680:
  http://www.Modemsite.com/56k/duns680.asp
  http://PHP.iupui.edu/~aamjohns/trouble.html#no tone

• Equium A60 - required OneNote product key

  Hi all

  I recently changed the HDD on my Equium A60, because the original was defective.
  I reinstalled the operating system and software, that it was delivered with the help of my DVD which is a copy kindly provided by Toshiba that I lost the original and additional recovery software CD.

  I'm trying to use Office OneNote, but as I click on the icon and start the pc to install the suite of programs I wonder for its 25-character product key that should be on the sticker on the back of the CD case or on the certificate of authenticity.
  The base of the laptop has the C of the A in windows XP and nothing else.

  Is there a way I can retrieve the product key or demand one without having to pay the price of the product?

  Any help would be greatly appreciated.

  Thank you

  Hi budy

  It is a delicate situation because the OneNote key has been placed on the sticker on the Toshiba Recovery CD which you have lost :(

  I think that there is nothing to my friend because this key is unique and I think you will have to pay to get the other keys :(
  In any case, perhaps you can ask the Toshiba ASP in your country if there is a way to get this key as well as the new CD of Toshiba \recovery.

  If all goes well, they can help