no tab port in XP Device Manager

Adding a printer to add a printer, and when it gets to the tab port selection, there is no sheer USB001, only Com and Lpt, port...

where the selection of the USB port,

There is no tab port in the Device Manager either...

win xp pro sp3

HELP PLEASE

Adding a printer to add a printer, and when it gets to the tab port selection, there is no sheer USB001, only Com and Lpt, port...

where the selection of the USB port,

There is no tab port in the Device Manager either...

win xp pro sp3

HELP PLEASE

Your question is confusing.

What is the Device Manager has to do with your question?

You have the printer driver on CD-ROM or downloaded?

If you mean there is no entry in the drop-down list, as shown in this image: http://screenshots.modemhelp.net/screenshots/Windows_XP/Printers/Add_Printer/03_%28Local%29/01_%28Use_Port%29_%28Select%29.shtml then you need to check the "Create a new port" to create the USB port.  Especially with HP printers, however, it is preferable to use the installation software as HP uses a USB port to measure.

Tags: Windows

Similar Questions

  • Com and Lpt ports not in Device Manager

    I have not "Ports" option appears in Device Manager in Windows 7.  I have an internal modem and I am trying to attach my blackberry, and there is no port - Com or Lpt.  It's just not there.  Any ideas?

    Hi emstaples,

    1. check if the device is hidden device.

    i. click on view under view hidden devices

    II. develop all winks in Device Manager

    III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

    2. check in the BIOS (embedded devices) if the com ports are enabled and set to "auto".

    BIOS WARNING: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    3. If the steps above does not resolve, then you will need to install the driver manually.

    Link: Installing new hardware: recommended links: http://windows.microsoft.com/en-us/windows7/Installing-new-hardware-recommended-links

    Another link, you can check: http://windows.microsoft.com/en-US/windows7/Install-or-remove-a-modem

    Thank you, and in what concerns:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD/dvd drive not in Device Manager!

    tried all the fix it solutions and the problem is still there, here are the results

    CD/DVD, reading and writing Publisher details
    Problems found
    CD/DVD drive is not detected

    The disk is missing or disconnected

    Not fixed

    Rescan devices
    Successful
    Problems found Details of detection
    6
    CD/DVD drive is not detected Not fixed
    The disk is missing or disconnected
    Rescan devices
    Successful
    Look for changes in available devices
    Details of detection
    Collection information
    Computer name: HALOINDUSTRIES
    Version of Windows:
    6.0
    Architecture:
    x 86
    Time:
    05/09/2010 23:08:36
    Publisher details
    CD/DVD, reading and writing
    This diagnosis identifies and solves common problems that can prevent you from reading and writing of CD/DVD
    Package version:
    2.0
    Publisher:
    Microsoft Corporation

    .. .i reinstalled the operating system and the drive of dvd/cd rom works for the installation of the operating system, but once it has fully installed the cd/dvd rom drive isn't even appear in Device Manager and it wont even open after the OS is completely booted!

    I also tried the regedit solution, but I have no upper or lower filters...

    I use a hp dv6815nr! Help, please!

    Very respectfully,.

    GK07

    I thought I had posted the solution.  The upper and lower filters need to be refreshed.  Here is a solution I found on the Adobe forums. http://kb2.Adobe.com/CPS/402/kb402306.html

    Refresh the CD and DVD drivers list in the Windows registry.

    Warning: The registry contains information on the system that are critical to your computer and applications. Before editing the registry, be sure to make a backup of it. Adobe does not provide support for problems that result from incorrectly modifying the registry. Adobe strongly recommends that you have experience editing system files before you modify the registry. For more information on the Windows Registry Editor, see the Windows documentation or contact Microsoft Technical Support.

    To refresh the CD and DVD drivers list in the Windows registry:

    Important: After you refresh the list of drivers in the Windows registry, you may need to reinstall any other CD or DVD on your computer to write applications. If you restart Windows after this procedure and other burning CD or DVD applications do not recognize the CD or DVD drive, and then reinstall those applications.

    1. Uninstall your Adobe application.
    2. Open the Registry Editor:
      • On Windows 2000 and XP: click Start > run. Type regedit in the box text open, and then click OK.
      • On Windows Vista: Click Start. Type regedit in the search text box, and then press ENTER.
    3. In the left pane of the registry editor, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class and select the {4D36E965-E325-11CE-BFC1-08002BE10318} key, which appears as a folder.
    4. Select file > export (Windows XP and Vista) or registry > export a file from the registry (Windows 2000).
    5. In the export registry file dialog box, select the branch selected under export range, name the file (for example, CDDVDkey.reg) and click Save to save the file to the desktop.
    6. In the Panel to the right of the registry editor, select the LowerFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
    7. Select the UpperFilters line, and then choose the editing command > delete. Click Yes in the dialog box confirm deleting key.
    8. Close the registry editor.
    9. Open the Device Manager:
      • On Windows 2000 and XP: click Start > Control Panel. Double-click the system icon, click the Hardware tab, and then click Device Manager.
      • On Windows Vista: Click Start > Control Panel, double-click System, and then click Device Manager in the task pane.
    10. Click on the symbol more then to CD-ROM/DVD-ROM drives.
    11. For each listed DVD-ROM or CD-ROM drive, select the icon then choose Action > uninstall.
    12. Restart Windows.
    13. Windows will automatically detect and reinstall your CD-ROM or DVD - ROM drives. You can check that the drives are installed in the device (see step 9) Manager. If the drives are not present, open Device Manager and choose Actions > Scan for hardware changes.
    14. Reinstall your Adobe application.
    15. Restart Windows.

    Important: If this solution doesn't solve the problem with the application you reinstalled, then you must restore the CD and DVD drivers list in the Windows registry.

    To restore the exported CD and DVD drivers list:

    1. Double-click the registry key that you exported.
    2. Close the registry editor.
    3. Restart Windows.

  • Satellite pro A60 com port are not not in modem device manager

    Have a new A 60 pro and cannot connect to the internet via the modem.
    The offer of 'solutions' by help needed to make sure com port 1 was turned on, but only a lpt port has been listed.
    XP pro says that the modem works well.
    How to get com port 1?

    David

    Hey there,

    IM afraid that you do not have a hw to port com on the device. Com ports you have on the laptop are "virtual ports. If you're expriencing diffuculties internet connection, could you please go to Device Manager (by going to the system control panel and choose the Hardware tab) and then access the properties of the Toshiba software modem, go to the diagnostics tab and click the query modem button and display the result.

    See you soon,.

    PS you'll only com port listed in Manager of devices if and only if you have a serial port on the computer.

  • My usb port does not work. Device Manager says he has a "code 10".

    My dad recently bought a laptop on ebay. It's a HP Omnibook 900 with a 4 GB HD. The previous owner had improved from the original from Windows 98 to XP with SP3.

    It has a USB port in the back & it does not work!

    In fact it is not even appear in the Device Manager! I need to select 'Show hidden devices' to see same the USB hub root. The USB port has a yellow warning icon. In properties, it indicates the port is enabled but does not work because of a "Code 10".

    What the devil is a "code 10" & how in the heck to solve this problem, so that the USB works?

    The port is powered. When I connect devices usb load they turn on & load, but, of course, are not displayed on the computer. My best theory is that the port can be usb 1.0 but the software is intended for usb 2.0 and what could be the cause of the problem. That's just guessing on my part because I do not know with certainty if the usb is 1.0 or 2.0.

    It is especialy boring being the only external devices can I plug a CD player (unwritten) & a floppy drive. It would make my life much more pleasant if I could run software, backup & file transfer, etc. with a usb drive instead! It could even than the laptop quite useful to be worth the bucks thirties, my father paid for it!

    Help, please. Thank you.

    Hi SnarFoo,

    Method1

    The Code 10 error code is generated when Device Manager it has not enough information or error that has spread upward through the device drivers is not recognised by the Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    See the article and check if that helps.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    http://support.Microsoft.com/kb/943104

    Method 2

    If the previous step fails, then remove and reinstall all USB controllers on the computer and check if that helps.

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

  • HP RP5800 - PCI Serial Port Driver Device - Manager

    Hello

    I currently have XP SP3 ghost windows HP RP5700 image and I transferred it to the new machine RP5800.

    All devices in Device Manager are now installed except one!

    "PCI Serial port".

    Can someone point me in the direction of this driver please?

    Concerning

    Hello:

    You can find more info on the device if you go into Device Manager, click on the PCI Serial Port and click the Details tab.

    After the first string you see here.

    I'm guessing that is missing one of the Intel AMT components.

    Paul

  • USB ports do not work. Missing in Device Manager USB controllers

    My USB ports no longer work after my computer crashed and I did a manual restart. As I go into the Device Manager the USB controller tab is absent even after I show hidden. I got no message error, nor do I see the yellow triangles. I have a gateway lx6200, 32-bit. Windows 7. system type x 86. Thank you

    Hello

    Thanks for the fast display update on the State of the question.

    Please click the link provided below which has Windows 7 drivers available for the Chipset.

    http://CA.gateway.com/GW/en/us/content/drivers-downloads

    Note:

    Please enter the model number, and then select the operating system as Windows 7 32 bit in the menu drop-down.

    Thank you.

  • Satellite C650 - USB ports not recognized in Device Manager

    When I turned off my cell phone, I lose the use of my two USB ports. The only way I can get back them is to use Device Manager

    Go into the Manager of peripheral devices, Bus USB controllers, there are 6 x Intel ICH9 Family USB Universal Host controller 2 x Intel ICH9 Family USB2 Enhanced Host Controllers and 7 x USB hub root. When I lose the USB ports, USB root hubs seem to disappear, and the only way I can get back them is to uninstall the controllers and then right-click Universal Serial Bus Conrollers for "scan for changes on the hardware. This brings back the root hubs and USB ports work fine... until the computer turns off again.

    Someone at - he encountered this problem and managed to resolve it? Its a hassle to have to go through the uninstall it / Reinstall procedure each time. Your advice will be appreciated.

    Hey Buddy,

    You use the version preinstalled Windows from Toshiba or did you install your own version? I don't see any information about the BONES in your ad...
    Theoretically, it could be a software problem so ports USB work correctly if they recognized in Device Manager

    You should also try to update the Web from Toshiba site chipset driver. Maybe it helps.
    Otherwise, I could imagine that the update of the BIOS can also operate and this update you can get on the Web from Toshiba site too.

  • Re: Tecra M11 - 15W - Parallel Port LPT1, not found in Device Manager

    Hello

    I have Tecra M11 with PA3680E-1PRP Docking Station. BIOS Version 2.9.

    Problem is, I want to use the Parallel Port LPT 1, but in anchorage additive dosent device manager there.

    Thanks much for the tips

    Hey Buddy,

    What device is connected to the LPT1 port? Usually if you connect a device to LPT port and you turn on you will be asked for drivers. AFAIK the LPT device drivers must be installed before connect you.

    Several years ago I also used LPT connection for my printer but one day it didn't work. The problem was only a defective cable. I replaced it with a new one, and then the connection to the printer has been recognized again correctly! :)

  • Satellite A200 - 26 d - error code 19 Device Manager on the USB ports

    I decided to try Windows 7, but the usb ports do not work in Device Manager all the usb root hubs have a yellow triangle and the State of the device says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

    I tried to uninstall via the Device Manager and restart the computer and download and reinstall the drivers for vista, because I can't seem to find the drivers for Windows 7, but none of this fixed anything. I was wondering if there was something else I could try or if I could get a link for the correct drivers.

    Hey JP317!

    If it didn t work removing the USB ports in Device Manager and restart the laptop, you should try to update the chipset drivers because they are usually a part of it.

    So check the site Web of Intel for an update and you should also find Windows 7 drivers.

    If you have any other questions, please let us know!

  • Satellite 1700-300: No. Lan port in Device Manager

    Hi Forum.

    I am currently repairing a 300-1700-Sat and reinstalling windows ME (Yuk I know but that's the preference of customers), however it does not show that there is any ethernet on the system hardware. There is an ethernet port on the back of the laptop, but it just does not appear in Device Manager.

    My first was, however, that it can be disabled in the Bios, I checked and there is no option for ethernet.

    Any idea people?

    Hello

    I'm not an expert, but you are sure that the laptop has a LAN port to 100%?
    The laptop is an oldie. That's why I didn't find a lot of information in the internet, but I studied a bit and found that the device supports only:
    Parallel port, PS/2 mouse or keyboard, 2 x USB modem RJ11, speaker/headphone, microphone (no internal) port, PCMCIA port and external monitor port of CRT.
    There is nothing of LAN port

  • COM PORT is missing in Device Manager

    When I have found that on that day there, I opened Device Manager, devices mobile COM port option has disappeared from the Device Manager. This who should I do to solve this problem...

    Hi all

    Product name: HP15R033TX

    Operating system: Microsoft Windows 7 (64-bit)

    When I have found that on that day there, I opened Device Manager, devices mobile COM port option has disappeared from the Device Manager. This who should I do to solve this problem...

  • Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

    Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

    Here is the document

    http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

    See the Suggestion of Shekhar:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

    Political group to turn and set the option for the inside network card power management tab

    http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

    Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

    http://www.kellys-Korner-XP.com/xp_tweaks.htm

    A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

    If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

  • I made the mistake of disabling all my USB ports in Device Manager! Keyboard & mouse do not work. I need to restore the Sys - HELP!

    I made the mistake to disable all my USB ports in the device (Windows XP Home Edition) my mouse Manager and the keyboard works not because they are connected through USB ports. I need to find a way to get to the system restore through the Mode without failure or normal startup. Can someone please help!

    Hi PaulCanik,

    • Do you use your laptop or desktop computer?

    Check if keyboard works in basic input/output system (BIOS), if it works, then you will need to enable USB port from there.

    You will need to contact the manufacturer of the computer to aid in the basic input/output system (BIOS).

    If this does not help then you need to connect PS\2 mouse and activate later all USB ports on the computer.

    Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Bluescreen when usb2 drive attivated, no error reported upward on Device Manager. Drive works __OK on usb1 ports. Unit worked for 18 months without any problem

    Error code = OX0000050, pilot?

    Hi comsecflyplan,

    · Provide us the full error code with error message.

    · What is the service pack installed?

    Try the methods and check the results below:

    Method 1:

    Run the patch from the link below: hardware devices do not work or are not detected in Windows:http://support.microsoft.com/mats/hardware_device_problems/en-us

    Method 2:

    Remove and reinstall all USB controllers:

    To remove and reinstall all USB controllers, follow these steps:

    a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

    b. click on the Hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    f. restart the computer and reinstall the USB controllers.

    g. plug in the removable USB storage device and perform a test to ensure that the problem is solved.

    Link for reference: advanced troubleshooting tips for General USB for Windows XP problems:http://support.microsoft.com/kb/310575

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Could not deploy FF 3.6.23 to FF 7.0.1 Via GPO

    Hi, I tried to deploy the package to upgrade FF 3.6.23 to FF 7.0.1 via GPO.(Domain Windows 2008 R2 Standard, Windows XP SP3 domain clients) But some PC can spend but a few PCs can not. (Deploy other software is okay, only FF) All guys got the problem

  • Portege Z930 and clean to Windows 8 install

    HelloI Z930 - 13 X and have upgraded in this 128 to 256 GB SSD. Unfortunately after having done that, I placed 128 GB SSD on my PC and did erase everything on it. Linux is my first but I paid for Windows 8, which comes with the laptop so I thought th

  • Change the properties of files and folders

    I recently changed the computer name and administrator, but I can't delete properties of former directors, i.e. name of files and folders. How can I do this?

  • How to change the settings for the taskbar in Windows 7.

    Anyone know if its possible to change the settings for the taskbar for the other windows or games can cover or be on top of the taskbar. I have my taskbar set to the top of the screen and when I start Flight Simulator Microsoft in full-screen or 1920

  • Http 404 file-907 Invalid COD error

    When I try to download the app OTA thr I am error gettting (error Http 404 invalid cod file-907), which only happens in the device of 4.6, but when I'm able to download thr OTA in 5.0 device and run it successfully. For compatibility, my App extends