No top-level page were found.

Similar Questions

• How to place a menu in a top-level page which only reflects this child pages pages?

  I need to create a menu for the child of the pages are detached from one of my top-level pages. Can anyone help please.

  It is not a setting that does it automatically, but you can change the menu 'manual' and manually enter page names and links.

• How to make a top level page link to a subpage...?

  I want to go to the 'products' page to be automatically link to "Pump" when you click on the menu, point to "products"...  Is this possible?

  I create a secondary menu go from various products, because I don't really like the option of a menu drop-down...

  

  Two ways:

  1: just do your pumps page your products...

  2: create a menu manuals instead of an automatic...

  But given that you use just like your product page pumps anyway #1 is your most simple.

• Page not found problem

  I hope someone can help me with this mystery.

  I've added a top-level page on my site and verified in preview mode. Looks like a lot. Everything works fine. But when I published, the menu bar leads me to a page not found error.

  So I recorded the site in html format that downloaded on my server. Still the same problem. Then I created a page with a different name duplicate and returned through the whole process, but it is also not found.

  I don't think it's a hosting issue because all my other changes are displayed instantaneously.

  I've never had this problem before Muse. Can someone tell me how to get the new page is displayed online?

  Hello

  In Muse, under the site map to go to the page that displays this error, right-click on the thumbnail and if the option "Export Page" is checked or not. Otherwise, check, save and publish again, this will solve the problem.

• Remove the top bar in the top-level navigation page

  Hello

  Is it possible to disable the top with Burger icon bar in the top-level navigation page and make it appear only served as in the articles? I thought that it was an option, but I can't seem to find anywhere in the dashboard or in tutorials.

  Thank you!

  Hi Jenn,

  There is no option to remove it when you're on a navigation page.

  Neil

• Is it possible to have top-level menu to horizontal top and under menu on the right or the left

  I have a site put in place with the upper level horizontal menu at the top of page.

  I was wondering if it is possible to have submenus positioned as needed - to the right or left side of the page rather than directly in the menus at the top.

  I currently generated submenus as a menu manual separated and placed next to the page.  Would rather all the menus were linked, rather than two separate menu widgets.

  Hope it makes sense.

  Hello

  We cannot achieve this with default menu, but you can try compositions on the page to create the menu.

  For example, in the ToolTip you can use trigger in the horizontal main menu and target in the side menu where users when the mouse hover to main navigation then target appears on the side of the page.

  Thank you

  Sanjit

• Try to install Windows 7, no device drivers were found

  On top, I sorry for my bad English.

  I have a problem. In fact, I have on my laptop HP (H0W28EA) SUSE Linux Enterprise Desktop. But I want to install Windows 7. I put the USB on my laptop, boot, and... error: no device drivers were found. I don't have DVD/CD with drivers with my laptop... I do understand that I need to download drivers. Help me. TIA

  Well, problem solved - in the bios, I have to define IDE

• Qosmio G30-153: no drivers were found during the installation of Vista

  Hi I tried to install Vista on my computer, but there are some bad things. I just insert the Vista CD and restart my machine.

  Vista has started to install and I have reached the point where Vista should find the drivers to choose, but its tells me no drivers were found.

  I took it to the Agency in Syria and they told me that this (Qosmio G30-153) machine comes with vista only.
  If you have upgraded from XP applies to the Qosmio only.

  I think there is another problem, but they could not solve it because I told them when I go to the configuration of the system, I found the drivers, but the names are different.
  Driver (C) named Raid 0, but the names of the drivers D Jbod and I think they should be eponymous.

  If they are different name, but they don know what I mean.
  do you know how to change the name of the pilots and why they are different.

  I hope you can help me and I will answer you on my email address if you don't mind my ([email protected]) is

  Thanks alotttttttt Byeeeeeeeeeeeeeeeee

  Here is no problem at all. Visit the Toshiba support under http://eu.computers.toshiba-europe.com page

  You will find RAID driver. Please download this driver and use it for the installation of the OS. Unmanned RAID HDD is not visible, but after the hard disks in RAID driver loading will be visible and you can continue the installation of the OS. RAID driver can be saved to USB.

  If you have any other questions, please write again.

  Bye and good luck!

• 650 HPprobook: page not found

  Hi just recently, I uninstalled Crome as I don't really use it but when that I start a blank page opens with the new tab at the top left and I think that its to do with chromium, also after some time when I try to open some of my Windows I get a "page not found" (by bing) now I have not bing or chrome , and the only way around it is to restart my PC any ideas please

  niloc wrote:

  now when I select a tile, I get the page not found

  It is a browser problem and not something that HP can do about windows. Looking on google on how to reset your browser page or homepage?

• Subgroup of experts can pass events to the top-level event loop?

  I'm working on a VI that may have up to 1000 controls (Yes, she really need that much).  To reduce the size of the user interface and increase the modularity of code, I partitioned design into subgroups that are loaded in tabs.

  Subgroups are responsible for:

  "VI reference to open"--> "invokes the method: Run VI '--> ' invoke the method: Insert VI»

  (Sorry, I don't know how to incorporate images here, yet)

  The upper level has some of its own controls in addition to the case of the Sub-group of experts, and it will be built on the design of producer-consumer model.  The loop of consumer manages the interaction with the hardware (write-only).  Each sub-group of experts will also have its own event loop to manage coordination of the user interface within the Sub-group of experts and also a preprocessing of data that results from the activity of the user within the Sub-group of experts.

  Here's the problem: go in the subgroup of experts, how do I pass an event up to the top-level event loop so that the hardware access request can be entered into the queue of the consumer?

  At first it seems I could solve this problem in two ways:

  (1) rather than to use an Invoke node to insert the Sub-group of experts, is it possible to connect the frame of the Sub-group of experts against a VI that is instantiated in the block diagram?   If there is, I can simply use dataflow to bring jury secondary to the upper level events.   But for now, it seems there is no way to have a subgroup of experts except by using the Invoke node.

  2) there is another way, that we have found, but this is an ugly hack. The reference to the 'Open VI' VI using, I use ' call method: control value: Get.  Gives me the value of a control in the Sub-group of experts, but there is no case of signaling, so I have to resort to polling stations, which slows down the user interface and breaks the model "Event Loop".

  Y at - it of other ideas for how to get events from the Panel under treaty to the next level?

  (of course, this isn't * all * the events we manage.)  The Sub-group of experts will actually a pre-treatment and then send only the selected events to the highest level user-defined)

  Thank you and best regards,

  J.

  I have not used the secondary method before, so I can't save what I think with real experience.

  But,

  If the Subvi who is put in a secondary control on front panel for a queue reference, I think you'd be able to do the Invoke node to set the reference queue control before calling the functioning of the VI.

  The other idea would be do not to have a reference of queue control to pass.  But use named queues and leave the Subvi in high school to create its own queue reference based on the same name that was created in the main VI.  When it ends, it could destroy its unique queue reference and not to force a destroy all and reference to the queue in the main VI would still be a queue works valid waiting for an another sub - VI at the secondary level to generate his reference to the same queue and sends the data in.

• Cannot connect to the 'HP connected' - page not found error?

  Hi guys,.

  I recently bought a HP5520 and trying to connect via connected HP.  I have never used wireless before printing so it's all a bit new to me, but I'm SURE it takes this hard.

  I finally managed to create an account in connected HP (which took several attempts on the 'create new account' link doesn't seem to work in Chrome) but now I can not connect the HP site connected to any browser.

  I go to the ePrint centre and connect you, that works very well:

  https://h30495.www3.HP.com/c/46359/us/en/

  And I am directed to open a session connected HP site where it says that I have will be automatically saved in:

  https://www.hpconnected.com/au/en/

  However, when I click on the link above, I show a blank page showing 'Page not found '.

  I tried this in Explorer, Chrome and Firefox and get the same results.

  I use a PC with Windows 7.

  It has been a few hours now and I can still print even a simple page of text... Can someone please help me here?

  I had the same problem in the Canada. So here's what I did:

  1. I used Mozilla Firefox and remove all languages (Tools-> Options menu / tab content, click on choose in the section on languages and remove all languages).

  2 go to https://www.hpconnected.com/us/en/. At this point you should not redirected.

  3 click Sign In at the top right of the page. Enter your email and password.

  4 you now receive a message 'Page not found'. On my computer, I was redirected to https://www.hpconnected.com/ca/en/. Now, here's the trick: click on the 'return' button (the arrow in the pointer address pointing to the left) and brings you to the home page where you will see that you are truly connected and it can proceed normally with the site!

  Fred

• Using the C-series SCTL DIO module with slower than the top level [FPGA] clock

  Hey all,.

  I'm running online research on a problem that I have a lot of success.

  I have a chassis with integrated FPGA, top-level 9030 clock 40 MHz.  I have a NOR-9401 DIO C Series module plugged and the value that will be managed by the FPGA target.  I need to count some linear encoders to exactly 10 MHz, no more, no less.  They are periods and gives a result of such kind that if I oversample or underestimate, I get garbage.

  If I create a SCTL and assign a source of synchronization derived from 10 MHz, I get an error code generation who:

  "Node read e/s for DIO3 FPGA is used in a clock domain that it does not support.  Areas of clock supported include: the clock of higher and clocks that have a rate that is a multiple of 40 MHz, for example 40 MHz, 80 MHz, 120 MHz and so on. »

  I tried several ways to work around this problem; First I tried just using a while loop with a loop set to 4 is ticking timer, but it then takes 9 clock cycles to perform the count for a reason any (although this code may compile in the SCTL without any problem).  I then tried to use the SCTL with a constant of 'true' AS a hack for a 'timed sequence' framework-related, and that certainly has not worked.

  Are there any strategies or techniques, or settings somewhere to work around this limitation on the AID I need to taste exactly 10 MHz?  I'd like to do this quickly in the software and get this rolling as soon as POSSIBLE.

  An image of the relevant section of the code is attached, I'm happy to provide you more things on request.

  Thank you very much!

  Maia Bageant

  Thanks for the reply!  The problem ended up being a hardware problem based on how coders were connected.  Now that I've fixed it, they're perfectly happy are oversampled.

  I guess my question is always legitimate to other applications, but not necessary for encoders a.

• Help HP & Learn Center... links lead to "page not found" at HP. Never worked months owned printer.

  Link on the 'HP help and Learn Center' software is almost never going nowhere on the HP site.  This software was installed that I installed the driver on my new HP LaserJet M251mw.  I guess that most of the people have because the printer model is not old.  Also that the software installed, he writes a check that he check my version of the software is the latest version.

  Except for the links of the menu bar at the top they all end in an error page 'page not found '...

  http://h20000.www2.HP.com/service/site/404/Bsc404_en.html

  who said: "we are very sorry!  ... The requested page is not found. ... " We apologize for the inconvenience!"

  I looked at the browser history to see what the links are like before he spread.  Here is the part of the link to 'Print information Pages...

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/ [...] [....]. PDF #nameddest = PrintInformationPa...

  I removed the part with "[...]" in which case it is printer personal identification information.  But as you can see it trying to access a specific PDF bookmark but is redirected to this URL to error.  It has been like that for the months that I have owned my printer.  I'm shocked that even if HP was a web maintenance that it still does not.

  I tried already support cat (I'm under warranty) but the person could not explain why the software did not work.  The tech just kept asking me my OS and if I wanted to install the driver or other software.  I told the tech...  Not as I said I have already installed the driver.  And that this software HP help and Learn Center was simply not working.  We went round and round on this point.  Very frustrating.

  This seems like a simple case of HP Web sites are broken and must be corrected.

  So, anyone can check the help links help & Learn Center are broken?

  Or does anyone have suggestions?

  Thank you.

  Hello uncore

  I'm sorry that you are having problems with help and Learning Center. Links should now work. Let me know if this isn't the case.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A

• Find a specific sublayer and pass to the top-level layer

  I have a lot of illustrator files which are organized by a model size. The layers are configured so that the top-level layer is always model. However the underlayment I need to pass to the next level could be called 42 border Pg or 30 border Pg or Pg 24 border.

  Y at - it a way for a script to search through the layers and if it finds '42 Pg border' or 'border Pg 30' or "24 Pg border" in the base layer model it it would move to the top level, but if he does not see an of these he does not give an error?

  I'm still new to scripting so the extent of my knowledge on this is to scan all the layers and unlock them. Then, find a specific layer name. This is the base layer and moving it to the next level that I'm not sure.

  Here is my current code:

  var doc = app.activeDocument;
  var allLayers = doc.layers;
  for (var i = allLayers.length-1; i >= 0; i--){
      allLayers[i].locked = false;
      if (allLayers[i].name == "42 Pg Border" || allLayers[i].name == "30 Pg Border" || allLayers[i].name == "24 Pg Border") {
          alert("I found the " + allLayers[i].name + " layer")
      } else {
          alert("Not the right layer")
      }
  }
  

  Any help would be greatly appreciated!

  I'm using CS4 on a PC running Windows 64 Bit with JavaScript

  This gives a shot.

  its still very early and my brain completely does not work yet.

  bring all the layers in the beginning (May) will ruin the stacking order much.

  var doc = app.activeDocument;
  var allLayers = doc.layers;       
  
  for (var i = allLayers.length-1; i >= 0; i--){
    allLayers[i].locked = false;
    deeper(allLayers[i]);
  }    
  
  function deeper(parent){
  var subLayers = parent.layers;
    if (subLayers.length > 0){
    for (var i = subLayers.length-1; i >= 0; i--){
    subLayers[i].locked = false;
    deeper(subLayers[i]);
    if ((subLayers[i].name).substr(-6) == "Border") {
       subLayers[i].move(allLayers[0],ElementPlacement.PLACEBEFORE);
    }
    }
    }
  }