No tv on Tecra A2

Similar Questions

• Tecra Z40 - A - 16 c - indicator battery life problem

  Hello

  As from 2015, I own a Toshiba Tecra Z40 - A - 16 c.

  I noticed a strange behavior regarding the battery life indicator. When the laptop is fully charged, the indicator shows 100% remaining. And when I use the laptop, the percentage drops slowly, as expected.
  However, as soon as somewhere around 50%, the indicator is suddenly decreases and says he has only 5 or 4% left and I should switch it on immediately.

  Any ideas on how to solve this problem?

  Kind regards
  Oliver

  The battery may need calibration. Load and unload completely several times.

  If it happens again, the battery needs replacing. You can check the level of wear using HWMonitor from cpuid.com.

• Tecra Z50-A-169 - impossible to reinstall WiDi running Win7 64 bit

  I got WiDi running, but it crashed the Tecra Z50-A-169
  It is not possible, that I do not understand why of resettlement.

  Registry may be damaged.
  Try to do a restore of the system in a week or two.
  Or try a registry cleaner like CCleaner.

• Tecra Z50A11R ID no no i-phone or i - pad

  After trying everything to solve this problem, maybe someone on the Forum Toshiba can help

  My Tecra Z50-A-11-R does not identify the i-phone or i - pad. I get a message that he noticed that an i-phone has been connected, but that may not be correctly identified.
  I tried different devices but keep getting the same message. When the devices to connect to other computers, they are identified. So the question must be with the laptop.
  Has anyone else experienced the same thing and found a solution?
  Thanks in advance.

  It works in one of the other USB ports?
  Maybe it will work better in the black USB2 port.

• Tecra Z50-A-180 does not start using the new SSD OCZ Vertex 460

  Hello

  I bought an SSD OCZ Vertex 460 for Tecra Z50-A-180 but the system only started only not with this device.

  BIOS detect SSD but not find any system start-up.

  I cloned the old SSD HARD drive, but the system does not boot with SSD.

  I installed the firmware 1.03 on OCZ.

  I await response.

  Thank you to

  What program did you use to clone?
  Maybe it's not compatible with the version of Windows.

  If you load a new copy of Windows or Ubuntu on the SSD can it start?

• Tecra Z40 - HARD drive upgrade

  Hello

  I bought the Z40 with a 500 GB HARD drive. As a replacement, I bought the next SSD:

  Crucial CT512MX100SSD1 - 500 GB

  Unfortunately I don't have to work. On the BIOS, I see that the system recognizes the ssd. But the boots of system restore, or windows 8.1 detail installs. Are there any known compatibility issues?

  Problems persist if the bios setting is UEFI oder CSM.

  I have upgraded to the latest version of the bios to 3.7, but that did not change the result.

  If the BIOS recognizes the new SSD drive, the drive must be visible to the system.
  May I ask how did you try to install the OS Windows 8.1?
  Have what media you used?

  The Z40 Tecra can't internal ODD (optical disc). This is why I m wondering about the installation procedure

• Supervisor of unlocking Tecra Z50 - A - 16 d/remove password

  Hello

  Last week, I bought a new Tecra Z50 - A - 16 d and I set a supervisor password. Now, I can not access the bios, because I can't unlock it.
  What is the key to unlock or remove the supervisor password? I read in the user's guide and google it, but he found nothing. In password utility I can put only a user password, but not of supervisor.

  Thanks in advance!

  Posted by theatre
  

  Hello

  Last week, I bought a new Tecra Z50 - A - 16 d and I set a supervisor password. Now, I can not access the bios, because I can't unlock it.
  What is the key to unlock or remove the supervisor password? I read in the user's guide and google it, but he found nothing. In password utility I can put only a user password, but not of supervisor.

  Thanks in advance!

  I too have same question I know what I set it I just do not know how to remove/disable supervisor? I use the Satellite Pro R50 - B - 12 p and I have 10 of them with supervisor defined using the same password.

  Kind regards
  Kye

• Tecra Z50 - A - 10 d striped

  Hello

  I have a problem with my TECRA. The back cover of this laptop model magnesium is very soft and brittle.
  After a few months, it is now full of scratches. My question is this: is there a way to get a new rear cover of the screen of this model of laptop computer? How can I get that kind of spare part?

  Thank you in advance.

  I'm sure that you will be able to order this part of authorized service provider local official Toshiba...

  I recommend you to get in touch with ASP and ask for this part:
  http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

• Tecra Z50 - A drivers & Windows 10?

  Hi, anyone knows when the drivers will be available for Windows 10?

  I tried with Windows 8 drivers, but for example, the function key utility does not work.

  Have a look here:

  http://win10upgrade.Toshiba.com/swup...SPX?region=TEG

  As you can see, the Z50 series - Tecra is already in the list and you can also find Windows 10 drivers for download

• Tecra A10 does'nt recognize 2nd HARD drive in the Bay of the STRANGE

  Hello

  My TECRA A10 - 1 HG PTSB1E does'nt recognize my second HDD that has taken the place of the cd-rom.
  I use a SATA caddy and the boot of the A10 with a CD-rom error!
  is it not possible to use a shopping cart with a TECRA A10?
  Does anyone have a solution?

  Thank you for your experience of return.
  Best regards

  Hello

  I guess that the Tecra A10 does not support these updates.
  The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

  But I've read a few things to get such2nd as recognized HARD drive.
  You must start the laptop without the HARD drive caddy in ODD Bay.
  After that the Windows system has started, you can plug/connect the HARD drive caddy and system PnP service should recognize the new device.

  I think this isn't the best solution, but it seems like it s the only way to get this HDD caddy recognized in the Bay of the STRANGE

• Tecra A50-A-1DJ - partition SSD

  I just bought a Tecra a-A50-1DJ.
  The 256 GB (SSD) drive resembles the format:
  1, 46 gb: recovery partition;
  217, 47 gb: drive C:.
  8 GB: partition for hibernation;
  11, 54 GB: primary partition.

  I would like to divide the space of C: drive so that it becomes:

  C: 100, 47 gb
  D: 100 GB
  F: 17 GB

  I tried with the integrated windows (disk management) with Paragon Partition Magic:
  The answer is always that I can't create more than 4 partitions.

  To work around the problem?

  MiniTool partition Wizard can operate

• Tecra A9 - protected password HDD data recovery

  Hello

  My old Tecra A9 is dead, it does not supply power even on the splash screen more.

  Bad news is that my HARD drive is password protected, and it has some interesting data that I need to recover (from my last backup). I know that the HARD drive password because I walked whenever I started my Tecra.

  I removed the HARD drive and mounted in a USB enclosure to try to recover the data from another PC.
  But the drive is not detected by Windows, which is to be expected, I guess, because it is password protected.

  Yes, because I know the HARD drive password, is there a utility software available that will allow me to recover my data?

  If not, what other options may be available?
  I thought to buy an old Tecra A9 on eBay or elsewhere and inserting the HARD drive in it, but I don't know if it would work (I don't know if the password is related to the specific computer laptop serial number or something else).

  Any information would be appreciated
  Tim

  I guess you could put the HARD drive in a laptop (any Toshiba or any brand?) and remove the password in the configuration of the BIOS.

• TECRA A2 PTA20E - pilot of the need for the WLan / Audio / graphics

  I have inherited an old TECRA A2 PTA20E - 02T01LFR 84063063P
  running on W7 Home Premium Eition

  The WIFI does not work!

  I need driver Audio multimedia
  "Networking".
  "Video".

  Help, please

  The Web of Toshiba site has downloadable drivers.

• Tecra A9 - after CPU fan upgrade works constantly at full power

  Hi all

  I have 3 Tecra A9 notebook that came with a Core2Duo T7100 clocked at 1.8 Ghz with 2 MB of Cache. Updated every 3 to a T7700 clocked at 2.4 Ghz with 4 MB of Cache. According to Intel, these two processors TDP is 35W. Books don't get really hot and not hot. The CPU FAN starts right full power after the display of the BIOS with the Toshiba Logo screen. Under Bios Version 2.1 on all 3 systems, having the same behavior on all 3 systems. CPU properly recognized under Windows XP, Win7, and Win10. Is it possible to get the adjusted to normal CPU fan? The system isn t is hotter than upgrading the CPU, just for some reason any BIOS has now decided the fan must operate at full power. I even traded one of the CPU Fans with that of a Tecra A10 notebook but had the same effect as with the original fan. Having no idea what I could do. I hope for your help!

  Best regards
  Bornchiller

  I think that needs calibration to be performed to configure the table of fan speed.
  Toshiba Service Center to do this.

• Need to remove the password on Toshiba Tecra A8 BIOS

  Hello. Dear can Technical Support, you help me remove the password on Toshiba Tecra A8 BIOS?

  Challenge Code = GH1PF-YLL2C-CKQVT-K2U75-JJF0K

  You must send in a center of Service from Toshiba for password removal. There's no other way.

• Tecra A11 Touchpad Windows 10 questions

  After upgrading my Tecra A11-182 (PTSE0E-0LP046GR) for Windows 10, I have problems with the touchpad. The cursor jumps from time to time in other places on the desktop, as in Word 2010. Y at - it a new version of the driver for this device? The Windows Device Manager indicates that the most recent driver is installed. Thank you for your suggestions

  Achim

  The cursor jumps because your palm makes contact with the touchpad while you type.

  The advanced settings of Touchpad has an option called "Disable tapping" or «Disable the Touchpad when typing»
  If you do not have these settings, you must update the driver for the Touchpad (Synaptics or Alps) that is compatible with Windows 10.