No upgrade to 4.3 for excite Pro AT10LE-A-108 and possibilities of rooting

It seems that everyone has upgraded to 4.3 on this machine, but I get no update system 4.2.1 via settings - system updates - service station.

Is there another way to get this update?
Why do I not receive an update option when other people like me in the United Kingdom received them months ago?

Site Web de Toshiba seems also unable to understand by serial number, so I can't apply on this point for them.

Finally!
Is it possible to root or otherwise get around hardware limits allows me to use properly the SD card, I bought for the machine?

Thank you very much!

> Is there another way to get this update?

No, AFAIK, you must upgrade the firmware via the Service Station.
This tool automatically receives the appropriate software and update the firmware to the last State.

PS: it is impossible to the root of the device.

Tags: Toshiba

Similar Questions

  • Excite Pro AT10LE-A-108 - WiFi of abandonment

    I have an excite Pro AT10LE-A-108 and (as well as suspended too frequently) almost every time that I try to use Chrome or Firefox it disconnects from the WiFi signal.

    The router is not the problem, as many other cameras use it without any problem.

    Any suggestions gratefully received.

    K

    Hello

    I recommend you to reset back to factory settings table.
    You could do a hard reset, press and hold the volume button upwards and the Start button / stop.
    Choose the factory (in the middle of the 3 choices) settings using the volume button to navigate.

    Note: your data and settings will be reset too!

  • Change the language using the cover of keyboard to excite Pro AT10LE-A-108

    Hello

    I bought a Toshiba * excite pro AT10LE-A-108 / PDA0EE tablet (Android 4.2) *,.
    It's Toshiba * UK cover of keyboard (English keyboard) / PA5132E-1EKB *.

    I want to change the language by using the keyboard from English into Greek.

    The tablet includes Greek for the supported languages, I can write about it in Greek
    but I can't change it is + keypad +.

    Can someone help me to do?

    I assume that you have not configured the settings for the external keyboard.
    In Android settings: language and entrance you need to find the option to set up the input method

    Downstairs, you will get the option for physical keyboards.
    Him that you have to touch the Bluetooth keyboard. Then you should be able to choose the keyboard configuration. Now select the language of the keyboard.

    In the new window, you will find the advanced option
    Here, you can also choose the layout for external keyboards

  • Excite Pro AT10LE-A-108 - enrollment fails - no network connection

    Hello

    I bought the Tablet Toshiba excited Pro AT10LE-A-108 with SN XD187362S on July 14, 2015 and the product was shipped to me on August 22, 2015.

    After the Android 4.2 update registration of the device fails every time that I reboot the system, after about 1 minute, with the network error message.
    No internet connection available. Connect to internet, and then try again to update your software.

    In addition, I can't use the Toshiba App Manager (App Installer), with the same message.

    My Internet works perfectly, so the problem is elsewhere.

    What should I do?
    Thanks for your help!

    Hey Felix!
    I had the same problem for a long time now, with my Toshiba excited AT10-A. It all started after leaving my Tablet for services (workload issues). Please tell me if and how you resolved this issue. I googled a lot but did not find anything useful. It's really frustrating with the enrollment of device message... #£@ % #! % # !
    See you soon

  • Toshiba excites Pro AT10LE-A-108 the battery

    Hey everybody,

    first of all, I got a Toshiba chance excites AT10LE-A-108 Pro in a common store in Germany.
    Everything was good except the battery won't charge.

    He always showed 0% after plugging the cable it immediaetly turned off and would not turn on without the cable connected.

    Then I got a brand new Toshiba excites Pro AT10LE-A-108.
    I did all the updates, while I was already wondering because the batterystatus switches always between 0% and "full."

    After several hours, I plugged the power cable and the same story the Tablet immeadetly turned off. Yet once, wouldn't turn on without the power cable plugged in:)

    Now its all yours :) It is just bad luck, or is this a common problem?

    What I have to change something in the settings?
    I don't know and I'm not going back again via post :(

    Best regards, Tom

    Hi Tom

    I don t think that it is a case of some incorrect settings.
    To me, it seems that the battery does not charge and from my point of view it s a hardware problem of battery.

    I think you have two options for a fix: you can try to get another new AT10LE-A feature from a dealer or you can contact the maintainer authorized Toshiba in your country for a fix.

    On Toshiba supports support ASP page, you can find the service partner in your country in the region.
    http://www.Toshiba.EU/innovation/generic/ASP_SUPPORT/

  • Excite Pro AT10LE-A-108 - reboot and does not light

    Hello

    I excite Pro 10 model AT10LE-A-108

    After you have selected 'Power Off' option Tablet closed OK but then restarts again. Only after several attempts to "Power Off" the Tablet closes down very well.

    Any suggestions?

    Another question that was yesterday the Tablet would not turn on / restart! I had looked at footie with Bt over the internet for an hour and a half without a problem. I then closed the screen for half an hour and planned to watch another game on BT the Tablet has been totally insensitive. It would not turn back on or restart.

    This morning I tried again and it works fine.
    Could be another problem related to overheating?

    This phenomenon, I've had about three times. Before I used off I 'State aircraft '. It is ok. This may be due to programs that are in the background. No not global warming.
    If not started, I hold the Start button time longer, about 10 sec. A plug in the adapter.

    Post edited by: ladar

  • Excite Pro AT10LE-A-108: after JB 4.3 external BT keyboard upgrade does not work

    Hi all!

    After update 4.2 JB JB 4.3 does not work my bluetooth keyboard.

    Pair ok, Tablet keyboard sees but does not.
    Please, do toshiba repair package or fix problem.

    On the other my android device (phone LG with 4.1.2) working this keyboard ok.

    Sorry, my English is very bad. (Google Translator)

    Thank you.

    [Keyboard Type | http://www.trust.com/en/all-products/18441-executive-folio-stand-with-bluetooth-keyboard-for-ipad]

    Okay, please, I want to downgrade 4.2 JB for this tablet, it's possible?

  • Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

    Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

    It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

    the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

    its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

    use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

    graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

    had no problem. Y at - it a hope?

    Hi SteveSimmons,

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

    http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

    I hope that the information above helps you.

  • Update of Toshiba excited Pro ATLE-A-108 4.4

    Hello everyone,

    I would like to know if the Tablet 'excited pro"- ATLE-A-108 will be updated to android 4.4.

    Thank you.

    Jonathan

    I think you can get this information directly from Toshiba only.
    It is just a community of users and unfortunately information about new updates Android has not been published on the pages of Toshiba.

    But let's hope that this update would be available in the future.

  • Excite Pro AT10LE-A108 - Android update for several issues of OpenSSL

    Fortunately more Android version avoids the bug of software, but there is a new raft of bugs that Android is vulnerable to the:

    http://www.eWEEK.com/security/OpenSSL-finds-and-fixes-7-new-security-flaws.html

    Is there a plan to fix the latter with an update?
    Of course, it would take some time, because I think that the latest version of Android 4.4.3 is still vulnerable.

    Clearly Toshiba will know a lot more about details.

    > Is there any plan to fix the latter with an update?
    Since this is a user to user community, I put t think someone will be able to provide more information on these updates or patches.

    > Of course it would take a long time, because I think that the latest version of Android 4.4.3 is still vulnerable.
    From my point of view of a few such bugs should be fixed by google android developers...
    Just Tablet manufacturers add some special software features and customize the Android system for hardware built into the smartphone and tablet devices.

  • Excite Pro AT10LE - A - battery remains at 98% when running on AC Power Suppy

    Hello

    I have a 4 weeks AT10LE.-a. I like to operate the unit from the mains as described in the manual, it saves the battery and is ideal when you watch long movies, I even asked a power outlet extra for this next to my sofa!

    When I connect the suppy the fresh battery from 15% to 100% network and is no longer dependent (status message on the screen saver and battery settings). After a few hours on food (about 4) the battery capacity suddenly drops to 98% and line status shows load. With the network connected power this status remains at 98% for days, it never comes back 100% and stops loading.

    My questions are:
    is, the battery charge still ist?
    can I trust the status line?
    can I use the unit for long periods, connected to the power supply without damaging the battery?

    I got it by my dealer and we tried two other tabletts of his stock and they exhibit the same behavior. His demonstration unit operating for months now on the current and remains at 98%.

    Sector is of 230 v 50 Hz (Germany)

    Details of the repetitive
    Modellnumber AT10LE-A
    Android Version 4.3
    3.4.57 - gc710e6f kernel Version
    [email protected]
    The JSS15Q.001120220.05 build number

    Thanks in advance

    Hello

    Not very well why the battery status shows that 98% of load, but AFAIK new battery needs to be calibrated first.
    Calibration means that the battery must be charged and discharged several times in line.
    The battery must be completely empty and discharged before you would reconnect the AC adapter.

    I think you should try this workaround first.

  • Toshiba excited Pro AT10LE-A-107 - maximum capacity of SDHC card

    Hi all
    I have this tablet for two years, a few days of warranty now. I decided to attach a larger SDHC card.
    Having two cards

    32 GB SanDisk Extreme SDHC micro and 16 GB SanDisk Ultra SDHC I. The two cards are not recognized by this tablet.
    The two cards are formatted to NTFS in the laptop, because I want y videos app 5 GB.
    Card maximum recognized size is an 8 GB card.
    In this description, there is no maximum support for the SD card capacity:
    http://www.Toshiba.EU/discontinued-p...-at10le-a-107/

    Any suggestions what to do?
    What is the maximum SD card that is recognized in this device, please?
    Thank you
    RoSy

    OK, tried to format the card with exFAT. Card 16 GB recognized.

  • Excite Pro AT10LE - A - broadband USB dongle connection

    Anyone know if it is possible to connect a micro USB cable USB female to use a dongle broadband when wireless is not available.

    In the past, I linked the tablet to my phone and come this way, but I have a dongle to spare I can use.
    See you soon.

    I've never tested this configuration, but in my opinion the other USB WiFi dongle will not be recognized.

    The micro-USB port that is available to connect the tablet to a computer to transfer data. The tablet can acts as a host and client via this port.
    In addition some additional devices such as the keyboard or the mouse (HiDs) could be connected but it will be available in the latest version of the software.

    To connect a USB device, you must use a microphone, a socket for a cable from the Jack.

  • Excite Pro AT10LE - A - camera Flash LED permanently on all the time

    Hello

    I have a 3 week old AT10LE - honestly and the led on the camera on the back cover is permantly on. As soon as I turn on the unit the led (bright) and stays on all the time. It remains on standby.

    I searched all the settings and there is nothing which could indicate as to why it remains on.

    Modellnumber AT10LE-A
    Android Version 4.3
    3.4.57 - gc710e6f kernel Version
    [email protected]
    The JSS15Q.001120220.05 build number

    Happen now everyday for over a week now.

    Anyone have any ideas as to why and how I can fix this behavious

    Thanks in advance

    Very strange

    Try resetting the Tablet back to factory settings.
    Press power and volume button at the same time to access the start menu.
    Here, you can use the volume up and down keys to select factory (in the middle of the 3 choices)

    Note: this would erase all personal data from your tablet.

  • upgrade VM NIC drivers for a computer virtual once VMtools and HW version upgrade to version 7

    Hi people,
    I just wanted to know your opinion on the VM NIC driver update once the VMS migrate from ESX3.5 to ESXi4.1 and as I am course upgrade VMware Tools 4 to 7 HW version. Please let me know as
    as the current network adapter is E1000. Need to move the VM NIC as well?

    Thank you
    vmguys

    as the current network adapter is E1000. Need to move the VM NIC as well?

    Hello

    you don't have to

    1. upgrade Vmware tools
    2. upgrade from version HW - don't forget that with version 8 VM can run only on ESXi5

Maybe you are looking for