No VGA port?

Similar Questions

• How to connect my 23 "Cinema HD (DVI - D) to a VGA port?

  I have a 23 "Cinema display HD display (2008) I'm trying to connect to a VGA port. According to my research, it seems that VGA and DVI - D are compatible, but I can't make it work. When I cycle the power on the computer as well display cycles, but I cannot get any video. I guess there is a problem with the adapter, and hoping that someone can recommend one that works?

  A simple adapter won't work, you need a VGA to DVI converter, such as:

  http://www.MonoPrice.com/product?C_ID=101 & cp_id = 10114 & cs_id = 1011401 & P_ID = 8214 & have q = 1 & format = 2

  Make sure that the VGA port is capable of 1920 X 1200 60 Hz.

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• TV Toshiba 43SH9UM - no picture but audio using the VGA port

  Hello

  I have a 43SH9UM projection TV.
  But now that I model in research on the Internet don't could not find anything on this TV!

  Please let me user guide to download (I would lose it!)

  I have problems with this TV!
  When I take my laptop with VGA port to connect to a TV, I do not see any image!
  Connect the audio, but I can hear it.

  Thank you

  _Another wire we Forum_
  http://forums.Toshiba.com/T5/televisions/43SH9UM/TD-p/599054

  + Hi +.

  + Thanks for your response. But I think that you're wrong! +

  + Vga port to connect my laptop to my TV, but only at a resolution of 600 x 480 image I saw on TV (480i), but when I change the resolution to a black screen on my TV show. +
  + Who does not automatically go to 1080i. +
  + While this TV supports this resolution! +

  + How can I get my TV in 1080i resolution? +

  + You have the user manual? +

  Thank you

  When you connect the laptop to the TV, the first thing you need to do is to allow certain port on your TV.
  When the VGA port is combination of keys specific use of TV from laptop desk to the external device.

  I don't know what laptop do you have but on most computers Toshiba laptop is FN + F5 key combination. Of course it won't work if the external device is recognized properly.
  Somehow, I think that your TV is not recognized correctly.

  Can you see options to toggle between your laptop and the TV on your laptop?

• Satellite C850 - how to prevent breaking easily the VGA port

  Hello

  Our school has recently made 20 portable Toshiba L850 and computers C850. As most of the staff allows to connect to his projector VGA port, VGA The port must be strong.

  In recent days, we have 3 laptops with the Port VGA brought away from the laptop! just one thumb on the cable when connected breaks this port, and we cannot get a Toshiba repair, because it's our fault. Fixing this problem will cost us an entirely new Mobo that will most likely cost to buy a new laptop.

  All solutions on how we can prevent the VGA port to stop so easily? There are no screws to screw the VGA port, unlike all of our older laptops that do not break and lasted much longer than 7 days...

  It is not easy to write something about it, except to say when you remove or disconnect VGA cable do slowly, gently and may move slightly left/right.
  I put t know if this is a design flaw. I think that everything is tested until it goes to production.

• Satellite Pro A300 - 1 GR - VGA ports with TV-out function?

  Hello

  Can someone tell me if the VGA port on my Satellite Pro A300-1 (Mobile Intel GMA 4500MHD) is equipped with TV-out function?

  If a single cable is needed to connect with TV's S-video input while a TV-out function is not available, then a relatively expensive converter is necessary?

  Any help will be greatly appreciated.

  Have you checked the user manual?
  What is the manual says?

• Satellite U300 - 13 M - port external monitor (VGA port) does not work

  Dear users of Forums from Toshiba,

  I have a problem with the VGA port. I use the Windows XP operating system. Laptop, do not display on an external monitor, I tried all monitors to connect to my office, but does not solve this problem. I also tried to reinstall Windows XP, once again, and nothing has changed.

  Please help me.

  Best regards, Elbrus

  Hello

  I guess that by Satellite U300 came preinstalled with Vista. Am I right about that?
  Anyway, if you want to use external monitor and switch successfully to him you must install the utilities and tools of Toshiba. There are several of them and allows you to use the FN + F5 key combination and move your desktop to laptop LCD display to the external monitor.

  Can you please tell me one thing: have you installed all the stuff of the Toshiba download page according to document Instructions of facilities?
  The configuration of the laptop is not known to me, but try please check the Intel properties and let me know if the external monitor is recognized in properties. Usually, you can choose to use the external monitor there.

  You can also start Toshiba HWsetup utility. There must be tab display. There you can also find an option to use the LCD screen + monitor at startup.

  Check it out please and post the results.

• missing vga port

  I have HP Pavilion p077TX-15 Notebook lapptop and I found that there was not then, how can I connect to a projector vga port?

  Thanks, it helped!

• HP Pavilion Tower 550-188na: does the trick for Pavilion HP 550-188na AMD A8, have a VGA port to connect to the VGA monitor

  Hello

  I just ordered a HP pavillion 550-188na desktop computer that will be delivered in a few days... QUESTION...

  This office has a VGA port?

  I need to know that I have a VGA screen and am not sure if I will have an appropriate or not.

  Help would be very appreciated.

  Congos, welcome to the forum.

  Yes, it has a VGA port in back i/o ports.  Here is the Specifications of the motherboard of the computer page:

  Figure: Orchid2-S i/o ports

  1. USB 2.0: 4

• How can I connect another monitor to compaq SG3 because there is only 1 VGA port and no HDMI.

  How can I connect another monitor to compaq SG3 series because there is only 1 VGA port at the back and there is no HDMI port.  The operating system is Windows 7. I think to buy vga splitter, I don't know if that will allow me to move images/data between the monitors. Please tell us what to do. Thank you

  It is based on the expected results.  A VGA splitter will give you two monitors but they will display the same image.  If the expected result is two different pictures, maybe something like this will do;

  http://www.Amazon.com/IOGEAR-external-video-card-GUC2015V/DP/B000NJFJJK

  or

  http://www.Amazon.com/STARTech-com-external-video-monitor-adapter/DP/B005G306I2/ref=pd_cp_e_0

  Some will also do DVI: http://www.amazon.com/Plugable-Multiple-2048x1152-1920x1200-DisplayLink/dp/B0038P1TP4/ref=sr_1_1?s=electronics & ie = UTF8 & qid = 1345919878 & sr = 1-1 & keywords = usb + to + DVI

• Monitors VGA port broke on my hp Pavilion s7700n slimline

  I have a hp Pavilion slimline s7700n, Windows Vista, how do I fix the broken VGA output port

  If it's the motherboard installed: http://support.hp.com/us-en/document/c00783691

  There is not much to do, since there is not a video card slot.  According to all that is 'burst VGA port?  Please explain why or how things are at this point.

• Pavilion 500-070: VGA port broken on HP Paviliion

  Recently, I had planned to put a few new parts (PSU, processor, graphics card) in my PC. I opened the folder to clean some dust out with compressed air. I closed it and I have no signal VGA connection to my monitor. I opened the box and messed with the port from the inside until it worked. A little later, the start of the port does not again and my previous dose did not. I tried the cable VGA and monitor with another computer, so I know they work.

  Anyway, the VGA port on the back is damaged and it does not work. I called HP and because my computer is no longer under warranty, they said it will take more than $300 to fix and I'm not so interested in this possibility.

  My question is whether, since I already ordered a graphics card, if I install a new graphics card, I will be able to connect the monitor directly into the card and be able to use my computer like this? Or is there an option that I need to be able to navigate? If it's the latter, I'll have to fix it or get a new motherboard.

  I know that my computer is a bit old and I'm a little new to this, but any help is greatly appreciated!

  Thank you!<>

  Enter the system BIOS/UEFI parameters by repeatedly tapping on F10 key when starting upwards. In some cases, you will have to type the ESC key to access the boot menu, THEN press the F10 key.

  I say you may need to disable the onboard graphics in the BIOS as BIOS may already be set to 'Auto' mode which automatically detects which graphics connector is being used and automatically use this adapter. But if it is specifically set to "integrated graphics", you will need to change it to 'Auto' or 'PCI-e '. I can't give you specific shows once you are in the BIOS, because the BIOS interfaces can vary considerably. But you should be able to navigate through the different sections and find the graphics settings, it is not so difficult. You can visit the BIOS settings before you make your purchase just to be sure that you are convinced that you will find the necessary parameters. Or, you can install the card and see how it goes, if you do not get a screen so you know that you should disable the graphic edge.

  Another consideration is that you have only a 300W power supply which probably is not a PCI-e power connector. The PCI-e slot itself provides only 75W so I would limit your new card to 75W or less.

  Still another consideration is that you will probably need to disable "Secure Boot"in the BIOS also.

  IMHO, I think that replacing the motherboard would be unaffordable.

• HP15-ac120TU: VGA port missing in my computer hp laptop 15-ac120TU

  Hello

  I bought a new laptop from hp 15-ac120TU Online and I'm not able to find the VGA port in my laptop. But the manual that came with the laptop have a VGA port to its peak. But in the specs of the laptop online has no VGA port mentioned in it. Is there really an available for this laptop VGA port.

  Thanks in advance

  Vicky

  Hello @Vicky7321,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems, with the help of the community!

  I read your post on the VGA port and wanted to help you!

  Based on the Specifications of the productand Service of Guide (Chapter 1, Page 3), the laptop, it seems there being no available VGA port.  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great New Years!

• Satellite P750 - unable to connect an external display via the VGA port

  Hi all

  My problem is the following:

  I tried to connect my P750 (running on W7 x-64) an external display using the VGA cable port. Unfortunately, these devices recognize my phone. Laptop does not recognize the external display, you can see in the graphics settings as additional display, but the screen shows "no signal".

  The computer always identifies the screen correctly, so it seems that there is communication from the screen to the PC, but not the reverse.

  This has been verified with 3 separate screens and television - still the same. All the screens work properly with the other PC.

  I already have:

  -try to play with FN + F5 / "windows" + buttons P - no change
  -install the latest drivers BIOS and video site Web from Toshiba - no change

  Suggestions how to operate? Is it possible that the VGA port is faulty?

  Thank you in advance.

  Hello

  You have the same problems with a HDMI output port?
  Usually, you don't need to change anything to get the external monitor works.
  Press Fn + F5 several times until the monitor RGB (VGA) was selected
  Since you can choose an HDMI output too, you should pay attention to this option.

  Have you tried to change the resolution before using the Fn + F5?
  It s worth a try

  Last but not least, you could set the default BIOS (press F9 BIOS and save the changes by pressing F10). But I don't very well if the BIOS contains some parameters of port RGB (VGA) m

• How can I connect mac pro to a projector VGA port

  How can I connect my mac pro book to a projector with a VGA port

  should be pretty simple.  Acorrding to Apple, you have a Thunderbolt port video that supports MiniDisplayPort, so you would need a MiniDP to VGA, then a VGA cable, and then turn on the mirror in the display preferences, under the Big Apple icon at the top left of your screen, then go to System Preferences and there you go.

  John B

• VGA port stopped working

  I have a desktop HP p6000 computer, running Windows 7, and the VGA port should have stopped working.  The monitor is no longer working or showing no signal.  I tried the cable and the screen with my laptop and both work very well.  I opened the side of the case, has blown all the dust inside, removed the 2 screws holding the port to attempt to reinstall the connection but impossible to remove.

  Any help or advice would be greatly appreciated.

  Thank you.

  Try to start with a RAM only.
  Try clear CMOS.
  
  But maybe the graphics chip has disappeared.
  You have an additional graphics card?
  What exact model type of your pc?
  
  C.