No video picture when the connection by Satellite 2410 to TV

I have a 2410 satellite that has taken video - RCA-type.
But when I connect to video in on my TV there is no picture but its OK use the headphone jack.
Can someone help me please

Hello

Have you checked if you use the correct NTSC / PAL settings?
Check it!

In addition, I would recommend checking if the right channel was selected on the TV.

Tags: Toshiba

Similar Questions

  • laptop loses picture when the hdmi cables are connected

    laptop loses picture when I connect the laptop HDMI cable to HD TV

    Help, please.

    Thank you.

    Try pressing your "fn + f5" together until both monitors are on. The combination of keys is to pass between the monitors. In your case, the first time, it should turn on the laptop screen and turns off the second monitor, the second must turn them both on. On some computers, it's the f4 key and on dell is the f8 key, the key is usually the image from one monitor to this topic.

  • Problem with video Capture where the connection settings are unavailable

    I have two capture - Dazzle Platinum 100 and Game2 PC cards. The issue is the same with both, so it must be something to do with a setting on my laptop.  I can't access the setting of the video input in the Capture menu of one of the capture software I've tried. I can select the device in the Source menu, but nothing happens when I click on the menus of the video input (the options are missing). As such, I can't select the composite input. The audio seems ok.

    The xbox and tv are connected using a separator and the component drive with connectors yellow, red and white coming on TV and I tried the two Pal 50 and 60 in the settings menu of xbox. I have set the settings to capture PAL and have also tried all the others.

    I also disabled the webcam and uninstalled the webcam software in the case which has been cause of conflict. The dazzle card detects an entry but cela there is no picture, just a white screen with lines. The dazzle card also caused regular dumps while the Game2PC only gives the incorrect parameter error 0 x 80070057/11878 they both.

    I've now provided all that may be in conflict has been uninstalled. I tried to change the capture settings and they are not available. Device Manager checked again and it appears Windows detects the device as device not video and Audio. Why would you think?

    I solved this by downloading a new driver from the manufacturer's website. The disk driver provided seems to have been inconsistent with Windows and caused the device to be considered an audio device only. Windows drivers has also caused this problem.

  • Problem - VGA output VGA or HDMI port does not work when the connection to the input of your TV

    Problem of VGA output - using an acer aspire 5520-5912 trying to connect it to the TV input - connect S-Video works well - port however VGA or HDMI does not work - 1 when I plug the VGA cable that goes to an entry of RD Gr Bl on TV, my screen goes black - as soon as I unplug the cable and press FN + F5 I get the screen back - if I restart the computer in order to have the computer to identify the external screen it will just a black screen when the priming. Troubleshooting using no external monitor is identified unless I use the S-video connection.  The Hdmi connection gives me the same result that the VGA - convenience store attempt will identify the computer screen.  OPSYS Vista. Thank you

    Hi cdk14031


    You have set display up-to-date drivers installed?

     

    Step 1 :
    To resolve the problem, you can check if the uninstall and reinstall so help display drivers.
    Also check if you have any exclamation point or cross the marks on the sides of display devices listed in Device Manager.

    a. click Startand then click Control Panel.

    b. click system and Maintenance, click Systemand then click on Device Manager.
    Note If Control Panel is in Classic view, double-click System, and then click Device Manager.
    If you are prompted for an administrator password or a confirmation, type the password, or click allow.

    c. in the Manager device, expand display driver, display devices, right-click and then click on Properties and on the driver tab, click Uninstall.

    d. When you are prompted to confirm that you want to remove the device, click OK.

    e. restart the computer.

    After the computer restarts, the drivers will be installed automatically.

    Step 2:

    If the problem persists I suggest you to check if you install the latest updated driver on the manufacturer's Web site to help you.

     

    You can also check out the link below and check if you get an updated video driver. You can install updates in optional updatesvideo card driver.
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly


    You can also check the support link and check if these help - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

    I hope this helps.

  • ViewPlanner fails when the "Connect-Start-workload.

    Hello

    I am working on installing a reference ViewPlanner, ViewPlanner 3.5 environment local.

    I created the Office of the GoldenRDSH and the Viewplanner device, without AD.

    I used Windows 7 32 bit under my desk and Office installed (2010..) and all the necessary applications and tools.

    Managed to do the check option, and there is no problems/errors.

    However, when I do the execution phase, it fails on the "Connect-Start-workload.

    Attached, the screenshots of the desktop and web appliance GUI.

    viewplanner.JPGviewplanner2.JPG

    The journal of Viewplanner.txt of the device:

    15/06/17 09: 12:30, 160 INFO Matching VM control & Mgmt-Perf with prefix: GoldenRDSH

    2015-06-17 09:12:30, 160 INFO Matching VM GoldenRDSH with prefix: GoldenRDSH

    2015-06-17 09:12:30, 161 INFO VM GoldenRDSH matched with prefix: GoldenRDSH

    2015-06-17 09:12:30, 161 VMs Office INFO found: ["GoldenRDSH"]

    2015 06-17 09:12:30, INFO 161 loading AD Info to data structures is done with adinfo: [{'schedlist': zero, the 'Protocol': 0 L, "name": "ssss", "wrk_FK": "QuickWordTest_1i", "poolname": ", 'grp_id': 11 L,"extrainfo": zero, 'percentage': 100 L, 'connections_per_client': 1 L, 'deskvms': ['GoldenRDSH'], 'rdshtype': 0 L, 'workprofile': {'IEbpm': 1 L, 'ARbpm': 1 L, 'Thinktime': 5 L,"extrainfo": zero, 'name':"QuickWordTest_1i"}}] [{{, 'hosttime': 1, 'random': 1, 'iterations': 1 L, 'OMP': 60 L, 'video':-1 L, "applist": "WORD"}, "clientprefix": "}]

    2015-06-17 09:12:30, 164 DEBUG get the configuration option monitor_control.pseudo_perfctr in VM GoldenRDSH

    2015-06-17 09:12:30, 184 INFO the value of the performance counter for VM GoldenRDSH: true

    2015-06-17 09:12:30, 184 INFO updated 1 desktop VMs

    2015-06-17 09:12:30, INFO 184 turn on VMs in the Scott/ad group: ["GoldenRDSH"]

    2015-06-17 09:12:30, 185 DEBUG turn on/off the VM: GoldenRDSH

    2015-06-17 09:12:30, 188 DEBUG VM GoldenRDSH is powered. Restart the virtual machine.

    2015-06-17 09:12:31, 250 INFO Operation: poweron_desktops, start time: Wednesday 17 June at 09:12:30 2015, Total time taken: 4.31

    2015-06-17 09:12:31, 251 INFO-

    2015 06-17 09:12:31, INFO 251 waiting for the number of virtual machines for you register

    2015-06-17 09:12:31, 251 INFO-

    2015-06-17 09:12:34, 860 DEBUG returning to the current state: 0 with status message: [IP recorded: 0] [the workload began on machines 0] [Uploaded results-> desktop: 0 (0 errors)]

    2015-06-17 09:12:50, 327 new customer INFO entry: 10.11.19.165

    2015-06-17 09:12:50, 328 registered current INFO status machines: [required servers: 1] [server: 0]

    2015 06-17 09:15:50, 328 INFO analysis all virtual machines for all required patches.

    2015-06-17 09:15:50, 328 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

    2015-06-17 09:15:50, 340 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

    2015-06-17 09:15:50, 341 INFO makes the analysis of the virtual machines.

    2015 06-17 09:18:50, 342 INFO analysis all virtual machines for all required patches.

    2015-06-17 09:18:50, 342 INFO makes the analysis of the virtual machines.

    2015 06-17 09:21:50, 426 DEBUG, there could be problems with the following virtual machines in this run (check vCenter Console to search for errors). Continue the race with other virtual machines.

    2015-06-17 09:21:50, 427 INFO receives the IP address for the computer virtual GoldenRDSH vCenter

    2015-06-17 09:21:50, 443 INFO Got, the IP address for the virtual GoldenRDSH computer: 10.11.19.165

    2015-06-17 09:21:50, 443 DEBUG IP: 10.11.19.165-> name: GoldenRDSH

    2015-06-17 09:21:50, 444 INFO Running query: SELECT * from hostinfo where IPADDR = "10.11.19.165."

    2015-06-17 09:21:50, 445 INFO Running query: UPDATE SET is_Client = '0' hostinfo, State is 'Unpaired', name = 'GoldenRDSH' where IPADDR = "10.11.19.165."

    2015-06-17 09:21:50, 452 INFO registration remaining VMs.

    2015-06-17 09:21:50, 452 INFO reached threshold number of machines. From the reference plane.

    2015-06-17 09:21:50, 452 INFO waiting for virtual machines to settle; sleep for the rise time.

    2015-06-17 09:22:20, 490 INFO Running query: INSERT INTO testinfo (test_name, ClientIP_FK, ServerIP_FK, Protocol, username, password, test_state, start_time, type) values ('1', '10.11.19.165', '10.11.19.165', 'NA', 'ssss_1', "passw0rd", "waiting", "2015-06-17 09:22:20", 0)

    2015-06-17 09:22:20, 495 INFO Running query: SELECT * from testinfo where testname = '1' and test_state = 'pending' and ClientIP_FK = '10.11.19.165' and ServerIP_FK = username and "10.11.19.165" = "ssss_1."

    2015-06-17 09:22:20, 505 DEBUG begins to gather its periodic vCenter stats...

    2015-06-17 09:22:26, 220 INFO-

    2015-06-17 09:22:26, 221 INFO launch the execution plan for the run profile

    2015-06-17 09:22:26, 222 INFO-

    2015-06-17 09:22:26, 222 INFO from the local workload for virtual desktops.

    2015-06-17 09:22:26, 223 INFO Unmapping default data on the 10.11.19.165 virtual machine folders

    2015-06-17 09:22:26, 223 INFO Running query: SELECT * from testinfo where ServerIP_FK = '10.11.19.165' and test_state = 'waiting '.

    2015 06-17 09:22:26, 225 INFO the id of the test server is 4

    2015-06-17 09:22:26, 225 INFO Running query: UPDATE hostinfo SET state = 'Busy' where IPADDR = "10.11.19.165."

    2015-06-17 09:22:26, 235 INFO Running query: UPDATE testinfo test_name = "1" SET, Protocol is "NA" of user name = "ssss_1" password = "passw0rd", test_state = "Running", start_time = '2015-06-17 09:22:20 "where test_id = 4

    2015-06-17 09:22:26, 236 INFO Pushing workload from the virtual machine configuration: 10.11.19.165

    2015-06-17 09:22:26, 237 INFO running commands remotely with arguments: server: 10.11.19.165, test_name: 1

    2015-06-17 09:22:26, 237 callback function to add INFORMATION for the remote root object for IP address: 10.11.19.165

    2015-06-17 09:22:27, 085 adding INFO reminder for the command startWorkload on the 10.11.19.165 Server

    2015-06-17 09:22:27, 115 WARNING remote call failed: [failure instance: traceback to remote host - Traceback unavailable]

    ]

    Error unhandled offline:

    Unhandled error

    The remote host - unavailable Traceback traceback

    2015-06-17 09:22:30, 119 configuration workload of INFORMATION sent to group: ssss

    You will appreciate your help.

    Thank you

    Guy

    It seems that the ViewPlanner agent is installed incorrectly.

    There are two packs zip for Agent of VP (1) for desktop PC (2) to the client.

    It seems that this client package is installed in the office instead of an office. You can install the agent desktop of VP and try again?

  • Problem to scan fingerprints is preventing the connection on Satellite Pro U200

    There seems to be a problem with the utility scan fingerprint on a Satellite Pro U200. Now, he does not recognize fingerprints recorded but normal (with password) connection does not work either. Immediately after the connection of the user is disconnected.

    I would be grateful for any suggestion.

    Adam

    Hello Adam

    Problem described seems to be the case and it is not easy to say what the problem is here. No one knows what you have done exactly.

    Did you follow the instructions how to use the fingerprint reader. It is described in manuals s?

  • Video stops when the ix2 - dl windows or WD TV Live streaming

    When the streaming of music videos or any video of my Lenovo ix2 - DL on my WD Live TV or PC video play but then a pause then let's get a little lower. Under Windows if I update my browser window, that is as the part is not there then it reconnects, and the video will continue to play. Restarting the computer is not the problem. And because this also happens when the flow to my WD TV Live it is not related to windows.

    Firmware Version: 4.0.8.23976

    Status is fine. No errors.

    Media sharing is enabled on all shared folders.

    Media Server is enabled.

    Aggregation of media is disabled because I do not want to scan my other computers for content etc.

    Too bad. I think it has to do with the extension .flv on the videos that I listen to. I have not noticed before because I have would be just the stream to my computer. If I stream mp4, they work fine, but the flv extension does not work. These videos will be interrupted from time to time everything on my wd live tv streaming.

    Time to convert a bunch of movies.

    Thank you and you can close it.

  • T430 video flashes when the laptop is moved

    I have a new laptop with Win 7 32 bit T430.

    Since the beginning, I have questions while watching videos on VLC media player or Winamp. The video flickers and gets stuck for a couple of second every time I have to move the laptop on and push.

    I guess it's a hardware problem.

    Hi Fufixa,

    Welcome to the Community Forums of Lenovo!

    I'm really sorry to learn that when you watch videos on your laptop Lenovo T430, it sparkles and get stuck for a few seconds every time that you try to move or to push.

    I would like to inform you that your Lenovo T430 has a technology called Active Protection System. When the protection system detects any movement, he stops to your hard drive and the system seems to be temporarily out of order. The hard drive is less vulnerable to damage when it is not in operation.

    You can manually disable Thinkvantage Active Protection System.Uncheck the "enable Active Protection System".

  • HP Envy 15 J6Z08EA #UUW: disabling pop-up message when the connection warning me that I have disabled the connection of the fingerprint

    I want to remove an annoying message when connecting. I disabled the fingerprint reader, because it makes my games to the tab down whenever I accidentally touch the reader. And it is placed "below" on the left side of the keyboard (keys WASD, if you understand me) who thought that might be a good idea.

    Now I get these messages of connection warning me that the fingerprint is not enabled, every time I started the computer, make me when entering my password to start over from the first letter, so that my password is messy (if I had the password: 'password' that would make me write pass) , and then the popup would come, that I have to click down, and then if I write "word" it originally make my password 'wordpass' test, if you understand. So it's a manufacturer 'fault' I'm trying to fix. Any tips? Is the way to activate only the reader of fingerprints to be active during the connection and not when already connected. Or how to remove these popups WARNING when connecting.

    Hi there SimonWoss,

     
  • Not available when the connection network connectivity

    I have a strange problem with a windows XP on my network system.

    I am running Windows XP SP3 with the latest patches and it is joined to a domain.

    When I start the computer I have not access to the network for about 3 minutes.  Loads of Windows and I am able to put in my credentials, but the connection does not occur until the network components start to work.  I am also unable to ping the computer so that during this time.  I've updated the network drivers and which don't is not improved with anything whatsoever.  I also ran SFC by any chance, he had a problem with the Windows files.

    If anyone has any advice I would appreciate.

    Thank you

    Hello
     
    Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.

    Please post your question in the TechNet Windows XP Technet Forums.
    Here is the link:

    http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

    I hope this helps.

  • How to recover data from a response of connection when the connection is unknown(-1)?

    I use the following code to retrieve the data in response to a connection:

    long len = _httpConnection.getLength();
    is = _httpConnection.openInputStream();
    _data=new byte[(int)len];
    is.read(_data);
    returnContent=new String(_data);
    

    But how can I form a byte array, when the length is-1 if the response includes appropriate data.

    Any ideas / best way to get the inputstream?

    StringBuffer sb = new StringBuffer();
    while ((ch = is.read()) != -1)
    {
       sb.append((char)ch);
    }
    
  • BlackBerry Smartphones BlackBerry keeps beeping all the time - just beeps when the connection with the carrier is active.

    Gentlemen.

    I have a Curve 8900 with the 4.6.1.133 (Platform 4.2.0.85).

    This unit maintains a beep every 10 seconds, I tried to remove the battery when the BB was on, wait a minute, put it again.

    I looked at all the configurations.

    I Don t no the slightest idea and wanted to throw it in the window.

    Any ideas? Advice?

    NEW INFORMATION. The device stores only beep if the wireless connection with the carrier is active. If it s off the beeps stops. I m using Claro to the Brazil.

    Camilo

    I found the solution. This is a bug beetween the network operator's SIM card software and the BlackBerry device. It s already solved. I had to follow certain steps to enable and disable a specific feature of the network operator and wait a dialog box confirm my operation.

    The beeps comes with the dialog box, but the apears only dialog box if you are in a specific screen of the blackberry. If you are in the home screen, it will not appear and you hear the beep.

    Camilo

  • How to disable the wifi automatically when the connection to the local network is detected

    I am an administrator of a small enterprise COMPUTING.  We have recently begun to buy HP ProBook 6550 portable computer b, with Intel Centrino Advanced-N 6200 AGN wireless cards.  I would like to configure wifi become invalid when the employee is anchored their laptop at work and establish a wired LAN connection.

    Does anyone know how to do this?

    Thanks in advance,

    Bill.

    Hi, Bill:

    The configuration menu of the BIOS device, to a framework entitled turn on LAN/WLAN switching.

    Having this setting is enabled, it will do what you ask.

    Paul

  • Can not get the video appears when the export > media

    Don't know what kind of error noobie I do, but when I try to export a video clip in Premiere Pro CS4 (via file > export > media > then select flv or h264), I get all the outputs video.  The audio falls on the fine, but the screen is blank in all the players I've tried (Flash, Quicktime, Adobe Media Player).  I had both the audio and video layers selected when you click file > export > Media, and there was an eyeball in the video layer for visibility.

    Don't know if this is the problem, but the 2nd screen in my first program (not the window of the Source but the?) Sequence window that I guess) is black to the rest.  If I click on play, I can see the video and hear the sound, but as soon as I stop the game, this window goes back to black (as opposed to the display of the current image on the film is).

    I tried changing all the settings I could think, but none of this has resolved things.  So, any help would be appreciated.

    Rennes,

    Some users have had problems with the ADL goes between PrPro and AE, plusent also. Why? I'm not sure. It could be assets, or Comps, or something else. ADL issues with, usually doing things the "old-fashioned, way" of Gets the Import/export of the project at the door, although the ADL should work without these additional steps. "

    Good luck

    Hunt

  • Fix problem 'local only' when the connection is through a wireless connection

    access point appear: unidentified network
    Internet appear bloqued

    access: Local only
    connection: Wi - Fi connection.

    Please help verify what is the reason for which "local only".
    IP is assigned automatically by DHCP, but is not possible to connect to the internet, the problem appears only on windows vista PC, in my other computer with XP, version the connection is good.

    I have Microsoft Windows Vista Home Premium SP1.

    Thank you

    Check how your security is configured on your access point.  I had to mess with mine a bit.  For some reason, my machines windows 7 were sensitive, in particular on the netgear access point

Maybe you are looking for