No way to start new topics and Lenovo G570

There is no way to start a new topic and yesterday, no way the same after all.

I have a laptop G570 crashed completely and the factory restore CD is corrupt.

It was a gift, I had last February and that he did not receive. I know they bought 3 notebooks at the time and I got one of them.

So I don't think it's out of warranty - but can't find any information on whether or not it is under warranty - on the Lenovo site.

HOW CAN I GET A NEW CD OF RESTORATION FOR THIS THING >?

I spent hours on the Lenovo Web site and can't find an answer to this question.

I'm crazy!

Can I install windows XP and later when I get a new restore CD put windows 7 on one to get rid of him. ??
I am not a tech at all, but not totally useless.

HELP! ~ !

Thank you!

I called earlier and my records are on the way.

Thank you very much!!

Tags: ThinkPad Notebooks

Similar Questions

  • IMac to stop and then turn back on Firefox starts new kid and resize "command +". How constantly resize. All started to do this.

    When I stop my iMac for the day and then return after day and turn on the Firefox itself has resized small again. I need to hit ' command + ' to the size I want. It is used to suspend the size I had put a page after a stop and after restarting the system (never seen and resized pages would be small) until a few days ago, when I did a MacKeeper clean. What setting has changed which caused this?

    You may have a corrupted file xulstore.json .
    https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

  • Using a new hard disk, Lenovo G570 key recovery disk

    Hi all

    I had to replace my hard drive on my G570, after replacing the hard drive, I used the recovery disks I cooked up on the system default settings.

    Now, the recovery discs seem to have install windows and partitions on my new hard drive factory default, but since then he's stuck on the 'Starting WIndows' screen If I try botting it in safe mode, it starts and then says that he cannot complete the installation in safe mode.

    Now, there is a problem with the recovery discs or the new hard drive. I'll be very grateful for any help in this regard.

    Thank you

    Haris

    Hi Haris,

    The product to the rear of the machine key is locked on the version of Windows you have on the machine. If you are installing a different version of the OS (i.e. your unit and WIn7 Pro with Win7 Home Basic), you will get an error "Windows is not genuine".

    You can however do a universal Windows 7 installation disc so that the installation of the OS will give you a choice to install Windows 7 Home Basic (see this guide). If you are currently running, take care to check the health of your HARD drive using any compatible (i.e. HD Tune) HARD drive diagnostic utility

    Hope this helps

  • "Start new Thread" is absent most of the time

    I'm not new to Dell Community, however, I post here in desperation of shear.

    I consider myself a person of intelligence average and the average Visual acuity.  I did not understand why sometimes I see the link "Start new Thread" and at other times, I would not.  I thought that there are a few steps to find what I didn't know.  I thought maybe the few times wherever I found it, it was by an unknown action, that I had taken.

    This morning I wanted to see a poster of beginner in another forum of the community on this community forum.  I tried looking for information before giving it to the other poster.  I have spent the last hour looking for this and other tips from the top downwards, for the link to start a new Thread.  I even read the how-to Post wikii and came out of the magnifying glass.  I couldn't find these 3 words!

    Then suddenly, after looking the other boards and back here, these 3 words were in plain view.  It's the durnest thing I've ever seen.  Sometimes the link is visible and sometimes it isn't!  What can I do for a beginner to this community when I have used Dell forums for 2 years, is having difficulty posting?

    What is someone having the same problem?  Whatever the issue, I will be very happy when it is fixed, it is very frustrating and time consuming!

    Thank you.


  • My address book is missing and I can't find a way to start a new or find the old man.

    I suddenly don't have my address book on this computer on my email account and I can't seem to find a way to start a new one or find the old man.

    See this section of the manual.
    http://en.flossmanuals.NET/Thunderbird/address-book-basics/

    When you open the address book, you see a personal address book?

  • I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It su

    I bought CS3 and LR2 nine from an apple store. I just moved to a new computer and it does not allow me to copy to my new without a product key. I started a conversation and they told me that I was out of money. $700.00 CS3 and LR $199.00. It seems of course after spending a lot of money with Adobe that it would be an easier way to take care of your customer than to spend another $900

    Help!

    Adobe programs should be installed, they can be copied from one place to the other.  If you do not have the serial numbers for these products, then you're probably out of luck to run again on any new installation.  If you have the discs, then the serial number is usually on the disc cover.

    If you purchase these items in an Apple store, they are not new... they are quite old.

    I doubt that they say anything about you being the money you spent, more likely, they say they provide is no longer support for older products and you conclude are you the money you've spent - this isn't something rare to hear - it is unfortunate, but are not uncommon.

  • Start a new project and need advice! New on Illustrator!

    Hello everyone!

    I start a new project and have met a roadblock. I created a mock up of a Jersey for a friends racing team in photoshop and now I need to get all vectorized to send off for printing.

    In photoshop, I know how to make a great clipping mask. Yet in Illustrator I am lost! I have cooked up some "Ghetto Rigs' but thought I should learn the right way, rather learn something on the wall.

    Here is my Mock Up

    Screen Shot 2014-11-25 at 4.39.05 PM.png

    Currently, I have the Lion vectorized via the Trace of the Image

    Screen Shot 2014-11-25 at 4.40.19 PM.png

    But I need the lion to fit inside the shirt. Normally, I would think that a clipping mask would be appealed to. So I created a shape of the front of the shirt

    Screen Shot 2014-11-25 at 4.55.59 PM.png

    Then I put the lion in the layer below

    Screen Shot 2014-11-25 at 4.57.04 PM.png

    I then go to object > clipping mask > make and receive this error message

    Screen Shot 2014-11-25 at 4.58.56 PM.png

    I read the message loud and clear, but now I apparently don't know how to make a clipping with 2 files vectorized mask!

    Any guidance? I approach this wrong? Big up to anyone who actually spent the time to read this n___n

    CPK,

    Always stretch after tracing image to get things to work.

    Select / them and object > Image Trace > Expand.

  • Displacement of vCenter Server to new hardware and start from scratch

    Hi all

    I want to configure a new server vCenter Server on new hardware and start from scratch instead of migrating from the old installation.

    Threre are currently only 5 ESXi hosts connected to this server vCenter Server, so it would not so much be working to the reconfiguration of the new facility.

    I wonder if there are other things that I have to take care of? How about iSCSI, network settings and so on?

    Thanks in advance,

    Andreas

    It is no big problem with a new server vCenter Server. Just follow the step to a new clean install.

    Existing hosts will be simple automatically deleted when you add to the existing VC they to the new cluster.

    Please keep in mind that the DNS entry are correct.

    If you have a HA, so I suggest to disable in the old cluster (it will be configured in a way to the new).

    If you have CVS you add hosts when are in maintenance mode.

    André

  • My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

    My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

    Time Machine backup to a sparsebundle.

    The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

    Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

    You has of course set the exclusion in Time Machine?

    By default, Time Machine will exclude your second drive unless you have included it. Did you?

    Once you get to this level during the backup, you can do a full restore manually whenever you want.

  • Uninstalled and reinstalled Firefox new, because the old version was crashing / "not responding." now cannot start new version.

    I have a desktop Windows 7 Home Premium 64-bit. Was using a previous version of Firefox for a while but is has started to run slowly or occasionally crash or better yet show "program does not" or some this verbiage when I started the browser, so I decided to move to a new Firefox. I uninstalled the old version and installed a new one – and I can't start even the browser. The browser window opens with "Restore Session - Mozilla Firefox (not responding)"
    I don't use IE, but that's what I have to do the same after this issue; That's why I can't even look for ir help install the troubleshooting soft...
    Any help would be appreciated.

    Firefox reset function move your old folder settings on your desktop, inside a folder named old data from Firefox. Please keep this record for a few weeks in case you need to recover anything of him.

    If the reset does not help, there are two main variables remaining here: possible corruption in the settings (your profile folder) files that are reported after a reset and possible problems in your Firefox program folder.

    Create a new Firefox profile

    A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It will also have databases of completely fresh settings and cool a cache folder.

    Out of Firefox and start in the profile using Start Manager > Run (hold the Windows key press R):

    firefox.exe -P
    

    Do not delete anything here.

    Any time want to switch profiles, exit Firefox and return to this dialog box.

    Go ahead and click on the button to create a profile, give it a name such as Nov8 and ignore the possibility of changing the location of the folder. Then launch Firefox in the new profile that you have created.

    Until you return to the profile and start-up Manager in your regular profile, your desktop shortcut should launch the new profile.

    Other than not having your settings, it works normally?

    Note: When you return to the Profile Manager, you might be tempted to use the button Delete a profile on your new test profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

    You can replace the Firefox program files without disturbing your settings by using this clean reinstall procedure:

    (1) download a fresh Installer for Firefox 33 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

    (2) as appropriate, close Firefox or make sure there is full compliance in the Task Manager.

    (3) to rename the folder (Windows 64-bit folder names)

    C:\Program Files (x86)\Mozilla Firefox
    

    TO

    C:\Program Files (x86)\OldFirefox
    

    (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

    It runs?

    Note: Some plugins recently installed can exist only in this OldFirefox file. If it is missing something essential, present in these files:

    • C:\Program Files (x 86) \OldFirefox\Plugins
    • C:\Program Files (x 86) \OldFirefox\browser\plugins
  • Why most of the tabs open empty with the label "New tab" and "topic: vacuum ' in the address line to the restart of Firefox since installing Firefox 28?"

    I have a system dual-bootable Windows Vista SP2 and Firefox updated to 28 on both systems. Since the update of the tabs more reopen empty with the label "New tab" and "topic: vacuum" in the address line of Firefox is restarted. The tabs that open correctly seem to be those who in fact, I was at the session of prefious. I can recover the missing tabs using the Session Manager to pick up a previous session, but of course it does not pick up the tabs open in future sessions. It seems that the tabs that I go to the session recovered are saved correctly, as indicated above, but which are not revisited in the context of the use of the session retrieved will drop the URL next time that I open Firefox it again.

    jdgale:

    I don't have the time to do it. However, 29 is just around the corner and we will put in the channel of exit 29, then hope that the issue is not you.

    P.S. I had originally chosen your last answer as the solution that you have migrated more to 29 but it seems that you have taken off. I'll be marking your last answer as the solution so that we can get out of the queue.

  • I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

    I wish that the tabs colorful. is it possible with Firefox? And or each new topic have a different color tab.

    The ColorfulTabs extension can be useful for you.

  • I tried to put all my accts 'e' to OE Mail, he mucked up, took the new identity and lost all previous messages... is there a way to retrieve them?

    I tried to put all my accts (MSN, Yahoo) 'e' mail to Outlook Express, lost my original sign in detail, took the new identity and lost all previous messages... is there a way to retrieve them?

    Rosieuk

    Messages are likely to the old identity and you can go to file | Import | Messages to bring them into the new identity.  See also point 4 here: www.oehelp.com/OETips.aspx#4

    The account information will have to be put in place in the new identity.  You can switch between the old and new identities also.  If save you messages and settings (see www.oehelp.com/OETips.aspx#6), you must do it for the two identities, unless the new identity has all the information you need in it.

    Steve

  • I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.

    I have a new computer running windows but 10, 13 photoshop elements disc.  Insert the disc does not start something going and looking at the files I do not see an installation executable.  I don't know what to do.

    Download from Download Photoshop Elements | 14, 13, 12, 11, 10

    Install and enter your serial number.

  • My new paid and used successfully once Photoshop elements on Windows 7 64 14 yesterday. Won't start today and I don't know why.

    My new paid and used successfully once Photoshop elements on Windows 7 64 14 yesterday. Won't start today and I don't know why.

    Since then, I reinstalled the software, and what ever problem I had disappeared.

Maybe you are looking for

  • Repeating the trigger with Start.Retriggerable

    I have a DAQ PCI-6259 (M-series card) card I am programming with DAQmx. I would like to know if there is a limit in terms of how close together you can use Extensible triggers. I intend to use a frequency of internal clock to 1us. An asynchronous ext

  • iMac OS 10.9.4 - no icon 6180

    C6180 has been installed on the XP - c6180 connected to the iMac machine but no icon on desktop - just update software, so that was for iMac - still no icon - at the end of the installation, the program wouldn't let me 'register' - just sitting there

  • 6520 will not print entire photo

    My 6520 will not print a full letter-size photo.  It prints about a third of the image until the computer gives an error message that the printer is unable to print the photo. I tried several quality and size settings, restarted the computer and the

  • XP mode in Windows 7 locked

    When you configure XPmode in Win7 for XPMUser, I chose the word because she would not accept a space with nothing in it.   I was using XP in Angel passes an empty space.  Vola, now I'm stuck HELP monia!

  • Latitude e7470 FHD ips?

    Is the screen full hd option on this laptop a screen ips or a tn screen? Anyone know how to get a code for a discount at checkout? someone knows how to get first access to assistance services and if they have some deals? Thanks in advance