No wireless access to the printer. Printer attached journal. OfficeJet J6480. Any suggestions?

Similar Questions

• Recently the removed Windows defender malware, but I don't want to lose access to the "real MSD. Can you offer any suggestions?

  Recently the removed Windows defender malware, but I don't want to lose access to the "real MS Defender. Can you offer any suggestions?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• We get an error "NETWORK CONNECTION ERROR, make sure a firewall is not blocking access to the printer.

  * Original title: printer error...

  I was printing with a printer wireless for months and now all of a sudden I'm getting an error, NETWORK CONNECTION ERROR and then readings make sure that a firewall is not blocking access to the printer.   I checked and it is not blocked...  I did a session of disorder and it reads no problems found.   Can someone please...

  Hello

  1. what version of Windows is installed on the computer?

  2. What is the brand and model of the printer?

  3. you have any non-Microsoft firewall installed on the computer?

  4. what security software is installed on the computer?

  5 have have there been recent changes made on the computer before the show?

  Please follow the steps below and check if that helps.

  Method 1: Run troubleshooting network printer and check.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2: Select the file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/enable-file-and-printer-sharing

  Method 3: I suggest to change firewall security settings, or disable the security software on the system and try to access the printer.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  For more information, see the articles and check out them.

  Understanding Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Allow a program to communicate through Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/allow-a-program-to-communicate-through-Windows-Firewall

  Let us know if it helps!

• guest computer must have access to the printer host cannot use

  I have a new Mac, an old Mac, an old Windows machine and printer of Xante AW1200.

  Almost all of my work is done on the new Mac.  I get the old machine Mac or Windows of the drawer on rare occasions, or when I need to print something, because the new Mac cannot use the printer.  (Xante never taken the trouble to develop an OS X 10.6.4 driver for this printer.)

  I would like to get rid of the Windows machine.  I have it successfully migrated to a machine of comments on the new Mac, using vmware Fusion 3.1.3 but I have not found a way to get the computer to see the printer.

  This isn't a complete surprise, as Xante does not provide a driver for their (former) printer and (my new host) operating system OS X 10.6.4 - but they were planning a WIndows XP driver that has always worked well on the Windows machine, connected by the RS232 port.

  The printer also works very well on my old Mac, connected via ethernet.

  Can I connect the printer to the new Mac's ethernet port.  Of course, the Mac cannot work with it.  But could the guest computer use Windows sound driver to manage the printer?

  None of the four standard ways of printing seem applicable: ThinPrint because the host cannot use the printer.  USB because the printer is not a USB connector.  network / wireless because I do not have my old Mac running all the time.  Hello because I think that it requires that the host can see the printer.

  It certainly isn't a frequently asked Question.  Sorry, my situation is so unusual.  But the printer is special enough for the work that I do.  Any tips?

  Thank you.

  If you have a router on your site then you should be able to connect the printer to the router, configure it as needed, and then accessing it in the comments as a network printer.  Note: The guest network should be configured as connected by a bridge to access in this way.

  Another option of network which is doable, but a little more difficult to set up, is to fix the printer directly on the Mac with a standard CAT5 Ethernet cable, not a Crossover as suggested in the Ethernet Port of Mac being automatic detection User Guide.  You would then manually configure the IP address, etc. on the printer and network bridged on the comments and even if Bridged his only access to the printer on this network adapter.  Then use a second network in the guest configured as NAT, if you do not also use Bridged on that, to enable the client to have access to other resources on the physical LAN to the host, such as Internet access, etc..

• I just bought an IPhone 6 Plus. When I get a text Message I get no advice or vibrations. I have all the settings correct. I know many others with the same problem with this phone. Any suggestions?

  I have just purchased IPhone 6 Plus. When I get a text Message I get no notification - no vibration and no noise. I put everything correctly. I know several others who have the same problems with this phone. Any suggestions?

  I have the same problem. You own an iPhone 6 Plus 2/9. Problems began the next day. Phone took over and got another new. Problems with another brand new! Volume is also impoverished - even when up until the end. Extremely frustrated! Any advice would be appreciated.

• I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions

  I am importing video clips using my Canon XL1s in final cut pro.  See the video, I hear the audio until it is imported.  any suggestions?

  danobtwo wrote:

  See the video, I hear the audio until it is imported.  any suggestions?

  Do you mean during the import process?

  There is no FCP X parameter to change the way THAT DV is imported.

  I used to hear the audio import with Sony cameras but Canon may be a different story.

  If the imported files are OK, then it can be a thing of Protocol firewire Canon.

  Al

• CS6 bridge, at startup, is unable to read the hidden. I have purged the central cache, but the question remains. Do you have any suggestions?

  I have purged the central cache, but the question remains. Do you have any suggestions?

  Himarkp

  Greetings!

  Please follow the steps below according to your operating system.

  Windows: -.

  • Navigate to C:\Users\Username\AppData\Roaming\Adobe\Bridge Cs6
  • Rename the folder Cache Cache.Old

  MAC: -.

  • Exit the bridge
  • Go to the library to the user: (~/Library indicates your user library. Hold down the option key and click on the "Go" menu in the Finder bar. The option key will reveal your user library.)
  • then navigate to user (your user name) / library / caches / Adobe / Bridge Cs6. here are a plug-in and and folder called cache.
  • Put the two items in the Recycle Bin and restart Bridge. Deleted files will be replaced by new and empty files.

  Let us know if this helps

  Concerning

  ~ Assani

• Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Just downloaded latest updates Camera Raw update for use with my new Sony RX100 M3 but still impossible to get the RAW files to open it. Any suggestions?

  Nevermind, I finally got it to work, thanks!

• can I use 2 wireless laptops off the printer wireless even without network or group?

  Have have one printer officejet 6500 709n, I have an office and 2 wireless laptops can plug in any separately without network or workgrouping simply by installing each one? Desktop vista, vista 1 laptop, a computer is portable win 7.

  Hello

  
  If the printer is connected to a router, you can access the two laptops, you just install the printer drivers for the two laptops.
  See the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer
  I hope this helps. Get back to us with results

• New wireless router and the printer does not print

  Old wireless router has failed, installed new network installation one C7280 printer.

  The printing attempt failed. The wireless network Test report indicates all PASS and Excellent, no other nerwork not detected.

  Remove the printer in Control Panel > printers.  Then:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the host name of the printer (found on the network printer configuration report the generated above). Click Next.
  If you get a message about required additional Port information, then the printer is not found using the host name. You can go back and start over or using the IP address of the printer instead of the host name.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Make a choice and click Next.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• DeskJet 3522 printing scanning copy: hp dj 3522 disconnects wireless network when the printer is turned off

  I have the above printer.  As indicated, it disconnects from the network when it is off.  I have a Westell A90 750014, MAC, disabled filtering router, the printer has been added in the MAC filter table, and in the wireless station status is listed as "associates".  When I reconnect once disconnected from the network, I am able to reconnect using the simple push button config method.  Can someone tell me a way to feel connected to the wireless network.  Thank you very much for your help.

  Hi @scotty1963

  I understand that you have problems with your printers wireless function despite all your efforts. I'm sorry to hear that, but it will certainly do everything I can to help

  Please use the following document to solve the problem and I would like to know the results of your efforts; The printer keeps Wi-Fi connection.

  I hope this helps.

• Access to the printer

  Trying to access my printer I get a message, local printing

  Spooler service is not running. What is - this and how do I get it

  work.

  What about Harry

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  To start the spooler service, follow these steps:

  1. Click Startand then click Control Panel.
  2. Double-click Administrative Toolsand then click Services.
  3. Double-click the Printer Spooler service, and then change the startup type toAutomatic. This option sets the spooler service starts automatically when you restart the computer.
  4. If you want to start the spooler service immediately, click Start in the area ofThe State of the Service .

  See if the above solves the problem.

  You can also havwe to uninstall/reinstall your printer.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to share the printer attached to the XP with windows 7, receive error message: windows cannot connect to the printer: operation failed with error 0x000004f1.

  Original title: printer HP LaserJet 4050 of PCL6 compatible with Windows 7?

  I have a desktop windows xp pro (SP3 5.1.2600) and you have a printer HP LaserJet 4050 PCL6.  The printer works fine connected to the desktop computer with a parallel port.  I'm trying to share the printer on my home network so that Win 7 (6.1.7601 SP1) laptops can use its printing features.  Please help.

  First I tried to add it with \\hostname\printername that returned this error: windows cannot connect to the printer: operation failed with error 0x000004f1.
  I downloaded and installed the Win7 drivers on the HP site on my laptop Win7, that has not changed a thing: http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=18318&prodTypeId=18972&prodSeriesId=25475&swLang=8&taskId=135&swEnvOID=4063
  Thanks in advance for any help / support!

  Hello

   

  1. the two Windows XP, Windows 7 connected in a same workgroup?

  2. can you access files shared XP of Windows 7 computer?

  3. check if the printer is shared or not?

  I suggest you follow these methods and check.

  HP LaserJet 4050 PCL6 printer is not compatible with Windows 7. Printer drivers are available for Windows XP-based computers only.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=25475&prodNameId=18322&swEnvOID=228&swLang=8&mode=2&swItem=LJ-4119-3

  It is not in the Windows 7 Compatibility Center.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=hardware&s=4050%20PCL6

  I sugegst you contact HP support for Windows 7 drivers, after you instaall drivers to check with the question.

  http://WWW8.HP.com/us/en/support-drivers.html

  See also: networking computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows#section_7

  I hope this helps!

• duplex unit is no longer an option in the print screen - hp officejet pro 8100

  I have a HP Officejet Pro 8100 that came with a duplexer. Until today, the duplexer has worked. Technically, I don't know that it does not work. But when I open the print screen in open office, adobe or any other program, it is no longer gives me the option to print double-sided. I have no idea what to do and there are no tutorials that explain how to fix this. Any help is appreciated.

  Discovered after trying to reinstall the printer software that because my updated OS updated to 8.1 of Windows 7, my printer is no longer compatible with my computer. Is - this ridiculous or what? I have messaged HP, so I have no guarantee so I don't know that they will refuse any product support. It's okay, if need be I will take my business elsewhere. I would not have to pay for support on a product that they have outdated on purpose. Companies used to be a quality product. Oh how times have changed. It is an expensive paper weight.

  @KKissmann, welcome to the community of HP

  I read your post and I would try to help. Your Officejet Pro 8100 is compatible with Windows 8.1, so we should be able to get through this problem. Maybe you've tried running the installation from the CD, which is perhaps not a Windows 8.1 driver loaded, what can happen and you need to download the driver online instead. We will eventually get there

  Please click here to access the full functionality of driver and software for Windows 8.1:

  Driver and complete software of HP Officejet Pro features

  Once the download is complete, run through the installation until it is completely finished. Subsequently, test print and check if you have the option to print double-sided.

  Let me know if you encounter any problems!

  Happy Monday