No wireless internet with Windows XP

Similar Questions

• Wireless internet with windows me

  I currently have an old computer with windows Millennium Edition. I just installed a card wireless D-link (several times) I downloaded the new drivers and uninstalled and installed several times, I did everything what the help & support says to do, security check, the address of ping, properties of the driver, all network connections and I still get the page can not be displayed when I try and connect to internet explore. The d-link utility seems to go well, it is said that I am connected, but something is it prevents entry into the internet. Any ideas? Please, please help!

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Above everything is OK, you must be able to connect to the wireless router. (WIFI hotspot).

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the networkZone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I can't connect to wireless internet with windows vista

  I bought a new HP Pavilion dv6 laptop with Windows Vista and I tried to connect to the internet from my laptop via router ADSL2 + wireless D-link but my network is not visible wireless.

  I tried to plug my ether cable and this time my network was visible, but it would not connect.

  I am able to connect from another laptop with windows XP wireless through the same router.

  My HP laptop connects via WiFi in other places, but not at home via D-link router.

  I am not able to connect to internet from my laptop HP since I bought it 9 months ago.

  
  

  What can possibly be the reason? Can you help me connect to the internet?

  Thank you

  It seems that your settings are not correct for the access provider or router (or both).  I suggest that you contact your ISP and have them walk you step by step in the process of installation and configuration and do not let them off the coast of the Nigerian line you have a good connection, as you wish.  They know that the parameters so that we don't have, so they can help you better than we can, and I'm sure they will be happy to do.

  Here is an article (with many additional useful links) on how to set up a home network in Vista:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on how configure and connect to a Vista wireless network: http://www.watchingthenet.com/windows-vista-tip-how-to-setup-and-connect-to-a-wireless-network.html.

  Here is a Microsoft Technet article on how to install and connect to a Vista wireless network:http://technet.microsoft.com/en-us/library/bb878035.aspx.

  Between these three articles and assisancce by your ISP, you should be running without delay.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to share the wireless internet with other wireless devices

  Original title: I'm trying to share the wireless internet on my computer with other wireless devices, are don't see is not the other.
  Internet through my wireless computer connections are not visible to my other devices. How can I fix it so that my other devices will be found and connected.

  Hello

   
  1. don't you make changes on the computer before the show?
  2. you receive an error message on the computer?
  3. what version of operating system you are using on the computer?
  4. What wireless device you try to share?

  Method 1:
  You can try the steps in the link and check.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  I suggest to turn on network discovery, and check if this helps you solve the problem. To do this, please follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  Method 3:
  If the problem persists then you can disable firewall on the computer and check.
  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  NOTE: Turn off Windows Firewall might make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
  You can see the following link to disable the Antivirus installed on your computer software.

  For more information about how to resolve common network problems, please see the links below:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

• wireless network with windows vista problems

  My laptop has windows vista edition family service pack 1. It does not connect to my router thomson TG585 v7 gateway. Ive tried everything nothing helped. I've heard this may be a compatibility problem with windows vista and there may be an available for this patch. Is this correct and how I could get it?

  You have a power switch Wireless switch on your laptop?

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Connectivity of the Internet with Windows 7

  I have a desktop computer with Windows 7 installed and a laptop with Windows Vista installed.  I access the internet via a wireless network.  Installed with Windows 7 computer has network connectivity, but not internet - diagnosis suggests that the problem is that with the internet connection to the modem, however, my laptop has network connectivity and the internet.  What is the cause with the desktop internet connectivity problem?  What can I do to fix this?

  Dumbo,

  Many people have difficulties to internet connection as a result of the recent update to Win7.  It has nothing to do with their AV. applications

  The update KB2705219 is said to be, the cause and uninstalling has resolved the problem at least a user [who did not provide more details, he comes to say it was fixed].

• Unable to connect to a wireless network with Windows 7 computer laptop.

  After resetting my router netgear wireless home network, I have not been able to access my own network with my laptop. I already had access to the internet with a wireless ethernet cable and ankles bound to the router. After reset the netgear router, I was able to access the internet from two other laptops XP and an Acer mini wireless with no problems at all. But my new laptop Toshiba with Windows 7 could not connect, even if he could detect the network. I tried all day even resort to the ethernet socket and wireless cable, but even that would no longer work. I was able to connect using this same cable attached.

  Hello

  Seems that the Wireless does not work on the Dell.

  This is the process to try to find what wrong with it.

  ------------------

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect to wireless internet after Windows Vista update on 16/09/10

  Since I've updated windows I cannot access my wireless internet connection, however, I am still able to connect via the LAN port.

  If I check my ipconfig it says under the "media disconnected" wireless network connection  I tried to get my IP address into my settings because they seem to have disappeared, but I can't always wireless.  I ran all Windows diagnostic tools, but all say that the internet connection is fine (due to it being connected by the LAN port).

  I also tried to fix it by other solutions on this forum, that is

  • Open Set Up a Wireless Router or Access Point by clicking theStart button, clickingControl Panel, clicking network and Internet, and then clicknetwork and sharing Center. In the left pane, clickset up a connection or network, and thenset up an access point or wireless router.

  The result of the message is ' Windows has detected network hardware, but it cannot automatically configure "and when I try to manually configure the server requires a user name and password which I don't have.

  Please could shed you some light on this case for me?

  Thank you very much

  Hello

  I tried everything above without result.  However, I managed to reinstall my wireless router software after having repaired my DVD driver software.  I restarted my computer and Wireless does not work.  Reinstalled the software new and restarted the computer, and then after a short period of time the computer connected to wireless internet!  Not know not why the remedy has been delayed or why it did not work after the first attempt, but it connects wireless now - what I know is that this problem occurred after an update of Windows, it's a shame that Microsoft failed to address this problem as it was their update it as many other people have also claimed.

  A big thank you to everyone who offered advice.

• State of connection system tray icon incorrect or choosing bad network connection when it is connected to the internet with Windows 7.

  Hello people,

  My Network icon always shows that I'm connected wireless.

  If I disable my wireless, it becomes the symbol of ethernet.

  As soon as I turn on my wireless, the wireless icon appears once again!

  I am running Windows 7.

  My reports of cable 1 GB/s network

  My reports 65 MB/s wireless network

  Windows 7 allows you to select the slower wireless network that should not be the case.

  Under network connections, select advanced and advanced settings

  and change in order to make sure that the connection to the local network was the first.

  I've updated my card driver to the latest version of the software. I also uninstalled and reinstalled all network cards with all necessary reboots of the PC.

  Under properties of the connection to the network Local and the properties of the wireless connection

  I chose properties IPV4 & IPV6, advanced and set the ethernet connection for the metric of the interface of 10 and the wireless to a metric of the interface of 25.

  I did too...

  In the device-> network-> adapter Manager Intel Wireless-> properties-> tab power management-> uncheck "allow the computer to turn off this device to save power".

  Windows always selects the slower network ignoring the manual settings...

  He has never done this since yesterday. Please help me.

  In short, when the wired connection is used, the ETHERNET ICON must be on the system tray, and not on the Wireless ICON even if both are activated. This was the case for me two days ago.

  I don't know what to tell you. In my (wide as technician) experience, when there are two a Wi - Fi and connection the icon always shows the bars wireless.  Your computer seems to be an exception that I can't explain.

• I do not have a printer icon dispalyed during the use of the internet with Windows 8

  When you use the internet, through Windows Vista, all icons have been displayed (printing etc.), but I don't have this with windows 8.

  Thank you for your time.

  Hello Robert,.

  If you print from a modern application, you can access your printer (if the drivers have been installed) app-> charm-> appliances-> printer.  It's the same thing for IE using the interface user of Moder.

  Mark

• Wireless Internet with 'limited access '.

  I tried to connect my new laptop Dell Vista to our network wireless at home. After many unsuccessful attempts (due to an unknown "logon doamin") I was finally able to connect to our server, however, with "limited access". Despite having "limited access" internet still does not work. Is anyway to solve this? We currently have two other laptops that work well on the wireless network.

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path? Make sure that the computer is trying to connect to the correct router as there may be
  another strong signal near her.

  Other Vista computers? You use the WPA/WPA2 security?

  Actually try updating your driver and disabling the network logon. Use a wired connection or download
  pilots on another machine and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for card (NIC) network and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Internet with Windows Mobile, 8 issues

  Hello.

  Currently, I get problems with my laptops to connect to my router. It is running Windows 8. Sometimes, when I'm on the internet web stops working. I tried to do a few ping tests and found that packets are lost (50%). I've also updated the wireless adapter drivers

  (Qualcomm Atheros AR946x Wireless Network Adapter to version 10.0.0.270). He says that the device is function correctly. However, this is not like all other computers in the House perfectly. Also, I tried the troubleshooting adapter and it is said that he has solved something on an incorrect gateway. I'm not exactly PC wizz but I don't know how to do most of the things!

  Thank you

  Will be

  Hi WillAllen,

  I appreciate the steps you tried to solve the problem.

  Please answer a few questions to refine the question.

  1. What is the brand and model of the computer?

  2. which antivirus program is installed on the computer?

  We will analyze and identify the cause of the problem. The steps described here.

  Method 1:

  You can temporarily disable antivirus programs and check the results.

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  I suggest you to uninstall and reinstall the network driver and check.

  Step 1: Uninstall the driver

  a. press on the key Windows + R.

  "b. type ' Devmgmt.msc" and press ENTER.

  c. expand network adapters.

  d. right-click on the driver, then select "Uninstall"

  Step 2: Reinstall the driver

  
  You can download and install the network driver manually on the manufacturer's Web site and check for the issue.

  See also:
  

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows-8/cant-connect-to-Internet

  Hope this information helps. Response with status so that we can help you.

• 6000v2.0 wireless keyboard with Windows 7

  My Microsoft wireless keyboard 6000v2.0 does not always work with my Windows 7.  Is my questions compatible?  The mouse works fine, but I wonder about the keyboard.  It has new batteries and tried to synchronize but the green light does not illuminate.  The keyboard does not work now.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  At soon Mick Murphy - Microsoft partner

• Problems with wireless c7280 with Windows 7 computer

  I myself am converted to a Windows Vista PC to Windows 7 64 bit and I have worth-keeping my C7280 connected wireless to the new PC.  I use a NETGEAR WNDR3700v2 router.  Any suggestions?

  There are three "Updates" on this page that are worth trying.