noise in computer science

Have a new HP 23 "all-in-one office on and it seems to make noise during the race.  Is this normal? The noise resembles a motor hum.

Yes, it's perfectly normal. It is very probably just your fan turns noise.

Tags: HP Desktops

Similar Questions

  • My icoud do not work in my phone but its work in computer science

    My icloud do not work in my phone but its work in computer science

    Set "do not work."

    iPhone overwhelmed?  version of iOS?

  • Why I can't play PINBALL SPACE CADET in the laboratory of computer science at our apartment, 1st floor, but not in my apartment on the 5th floor?

    I have an AVERATEC with a cracked screen, a LENOVO and HP, (with blu - ray player!).  I think that I was once on Windows 7 and I am now on Windows Vista.  I have a lot of plug-ins and surge bars in my apartment.  I have almost run out of space plub.  Sometimes operating a PC in my apartment is surprisingly easy, sometimes very skittish or not at all!  I got about all the problems in my apartment, you can imagine and then some!  Down in the laboratory of computer science at our apartment, I rarely have problems at all!  I WANT THE 3DPINBALL GAME: Space Cadet Pinball, I USED to HAVE IN MY APARTMENT!  Sanmartin suggestion did not work! I use free Hotmail.  It may be Windows XP I have.  I don't understand any of this.

    Hello

    This may help, I pulled off a XP system,

    http://mikemstech.blogspot.com/2011/11/how-to-get-Windows-XP-Pinball-in.html

  • Software deleted files still in computer science

    I use a HP s5310f w/4 GB of ram, 600g hd, Win 7, IE8, Norton 2010.

    I had a lot of problems with Roxio Creator 2010 and ended up uninstalling because whenever I tried to reinstall I would get the error message "certificate missing or corrupted", and Roxio/Sonic could not solve the problem. I also uninstalled the Roxio Photo Show softwarwe as well. I used Revo uninstaller with advanced registry scan for the two facilities. However, when I click on start and type Roxio in the search box, a list will appear showing always almost 36 000 files in my computer which are Roxio Roxio and associations.

    My question: If the software has been uninstalled, and leftover files deleted from the register, what are the files 35 000 + and why are they still in my computer?

    I am tempted to select all and delete, but do not know what happen to my computer if I did.

    Any ideas/suggestions?

    boong

    boongsong wrote: I also uninstalled the Roxio Photo Show softwarwe as well. I used Revo uninstaller with advanced registry scan for the two facilities. However, when I click on start and type Roxio in the search box, a list will appear showing always almost 36 000 files in my computer which are Roxio Roxio and associations.

    My question: If the software has been uninstalled, and leftover files deleted from the register, what are the files 35 000 + and why are they still in my computer? I am tempted to select all and delete, but do not know what happen to my computer if I did. Any ideas/suggestions?

    Hello boongsong, I have Roxio Creator 2011 Pro and shows 2 757 files, 285 folders. It is only in the Program Files folder and not all registry settings.

    There must be something else.

  • Can not get a sound in computer science

    Original title: Audio driver problem. Help, please.

    I have problems with my driver. Recently, I received this computer from my mother, her husband cleaned files from the computers and I think he deleted a sound driver, because it is not read all speakers.

    Hello

     

    Thanks for posting the question in the Microsoft Community!

     

    You are unable to get sound from the computer.

    1. What is brand and model computer?

    2. which version of the operating system are you using?

    If you are unable to get sound into the computer then it's perhaps because of connection issues or if the drivers are corrupt.

    To check if the problem is with the drivers or the connection, I suggest you follow the steps in the site mentioned:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

     

    I hope this helps. If the problem persists, let know us and we would be happy to help you.

     

     

     

  • bad series communication ports, in computer science labview8.0 run time installed on engine


    You also need the driver NOR-Serial, installed on the second computer.  You can get NOR-Serial and NI-VISA, as well as all the other drivers that you use in your executable file on the drivers and updates page.

    Thank you!
    Meghan

  • in computer science, management, why other devices doesn't show?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I can't find the external hard drive, it used to work properly. Computer laptop may is a Compaq 610 and the OS Vista Business.

    Hopefully one of you can help me.

    Thierry

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Try it on another PC.

    Perhaps his failure?

  • large AppData file in the user's data. the 87 GB file size. I can __delete this file? I am a novice in computer science.

    OS (C :) size 222 GB. free total space 28 GB.) AppData file 87 GB.

    The AppData folder contains essential information on the programs and features that are installed on your computer and should not be deleted.  You can get a tool like TreeSize Free and see what inside this folder that occupies a lot of space, at this time, you have some idea what app or program feels that he owes a lot of space and make a more informed decision.

    "bwatanabe" wrote in the new message: * e-mail address is removed from the privacy... *

    OS (C :) size 222 GB. free total space 28 GB.) AppData file 87 GB.

  • pre installed dvd driver suddenly absent / start not in computer science or Helllllllppppppp Device Manager!

    I have a HP Pavilion laptop.  I turned on my computer to put on a cd, I was able to push the button to open and insert the disc. However the cd would not play. I got no error messages.  When I went to start - computer drive E: (dvd player) wasn't there.  I checked several forums and tried a mrfixit.  This solves the problem, until I rebooted my computer, my drive would disappear again.  I ran mrfixit again and so on.  Now Mrfixit will not fix it.

    My player does not appear little matter what I do, I can't.  I can not find uninstall, reinstall, or remove the filters that they...   I checked all my updates for windows and driver updates, I ran my hp health.  I've fussed and complained.  Can someone help me?

    I don't know the root cause, I do not remember any new download program.  I use Norton 360 and update daily. I have Vista 32 bit

    Run the command as admin sfc / scannow it says found corrupt files but unable to fix some of them.  I don't know if this would affect the dvd player.

    Thanks for the help

    Hello

    Many files that SFC cannot resolve are not important. Probably best to go to the next and upcoming section
    Back to this journal.

    Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

    put the command from below (copy and paste) in this box and her and then press ENTER.

    findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

    who creates the sfcdetails.txt file in the folder that you are in when you run it.

    So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    in Windows Vista
    http://support.Microsoft.com/kb/928228

    This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
    here. NOTE: there are probably duplicates so please only post once each section error.

    You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
    You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
    (You may need to search sfcdetails.txt if it is not created in the default folders.)

    ======================================================

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • a record of a layer in computer science.

    How can I enter a layer records into my computer via the microphone port?  I have the audio cable I don't know what program I should use or how.  Help!

    http://social.answers.Microsoft.com/forums/en-us/vistamedia/threads

    Manage your music and other sounds: stream audio, burn, rip and more.

    Repost in the Forum above.

    See you soon.

    Mick Murphy - Microsoft partner

  • Incorrect WARNING of small footprint (use red bar) in computer science

    Hi, my drive has more than 100 GB of free space, but the bar to its use in the computer is displayed in red, as if it has reached a limit of small footprint. It looks like Windows applies the same 10% or 15% disc hard space value of warning of small footprint, regardless of whether the drive is 50 GB in size or 1.5 TB, which is not very smart and obsolete for newer computers.

    Y at - it a registry key or somewhere I can change this percentage and displays then the bar its use in green and not red?

    Hibernation files and page are already reserved (set of 5 GB), then surely space low warning for a 1.5 TB drive should be 5 to 10 GB, not 150 GB or more. How Windows 7 calculates the limit low space looks pretty silly, not much Intellisense it.

    This isn't a matter of high priority, but it makes the computer applet look stupid and it's irritating everyday to see 100 GB of free space is put my computer in the red.
    It would also be nice to be able to change that percentage lower limit in the computer/manage/storage/disk management or directly in the properties of the disk ('Tools' tab).

    Hi Chimel,

    It's the architecture; Unfortunately there is no option to change the percentage for warnings of small footprint on the computer.

    You can provide feedback on the addition of a new feature of the operating system on the link: http://connect.microsoft.com

    Thank you, and in what concerns:
    Swathi B - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to open blackBerry smartphones. File backup IPD in computer science

    Hi, I tried to open the backup. File IPD in the documents from the computer. One way to open files is with the reasearch in motion Office Manager, but I don't know where it is to open. Is there a free download that will allow me to read the text in the. IPD files? Thank you

    Dear Carcavelos: I have a program on my Web site that reads an IPD file and produces various text files / reports based on the DBs detected on the RPI. It works on Windows and Excel. The macro and documentation are at https://sites.google.com/site/ipdparse. The current version is 1.7. I'll post version 1.8 over the next two weeks. All my services are free. If you have any questions, comments or additional requirements, contact me (see email address on my site). rapanui21. Mike.

  • high pitched noise high computer

    I've had this computer for about 8 MB and it was good to work (for laptop HP 630) and about ten minutes ago, he did a very short high slope whining for literally half a second... just a very short, almost like a blip, but maybe a little bit more long as I said on a second half... I put a new keyboard in just about three hours and it seems fine... no idea...? ...... (I was not in itself, by typing just browse the internet looking at Pneumatic mattresses, back and forth between sites)... .thanks in advance...

    Hi Charlesxa,

    Glad to know that the steps have helped you solve the problem. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows. We will be more than happy to help you again.

    Thank you.

  • internal drive shows in computer science, but "is not accessible.

    After that chkdsk on a usable internal drive, I used 'Start' - 'computer' the drive icon. I get "F:\ is not accessible - access denied. When to use disk management; the disc comes with.

    3 basic GB 1397.26 drive healthy (primary, active Partition' in the block on the left and the right block is completely empty.) I want to get it even if I have to reformat.

    Fixed - had to remove thedisk drives and reinstall all the cables - they reappear and were usable at the next startup.

  • No noise in computer... !

    Original title: playi sound recording have no sound please help

    I HAVE NO SOUND THAT FATE OF MY PC

    Hello

    (1) have you made changes before the start of this issue?

    (2) don't update you the latest audio drivers on your computer?

    I suggest you follow the steps in the below link and check if it helps.

    Follow the steps in the following article if not already tried.

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    For reference:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

    It will be useful.

Maybe you are looking for

  • Need help with premptive shock practices!

    So I recently had to fix my computer, due to the fact that I apparently have a lot of static shock in my house. My next step he how to avoid it happening again in my computer. I got rid of my wired headset which caused the shock through my computer,

  • Disconnection from the WIFI

    I got my laptop about 1 year and it has recently begun to disconnect WIFI, it starts to connect, and then suddenly it disconnects I tried different WIFI connections to friends, and always the same problem, also along the bottom of the screen I am now

  • How can I add a NSV for a 2D array?

    I tried to connect a 2D array to a NSV. However, there is a problem connecting to a table in a 1 d NSV 2D. So, how can I change the property of the NSV of 1 d in 2D, instead of insert functions or the other BUILD TABLE for INDEX? Thanks in advance!

  • Battery Canon NB - 10 L for G - 15. I need a replacement. What to do with the average 920mAm etc.

    My battery of origin G-15, NB - 10 L is a failure.  When I look for a replacement, the after the 7.4Voltage do not match.  Is it important.  My original CD says 920mAh 6.8Wh (Li-on).    Replacements, I look online, while still 7.4 V, say things like

  • All-in-one HP Officejet 7410: your printer cannot be found on your wireless network

    I have a home network and two printers connected wirelessly. One is HP Laserjet P1102w and works very well. The other is all-in-one HP Officejet 7410 and I am not able to connect to it. I installed the HP software, but it fails to detect the printer.