Noise suppression

Similar Questions

• Background noise suppression

  Hello world

  I recorded an interview in a laboratory. The person speaking is picked up fine, but there's a buzz throughout the audio file. I think it can come from the microphone as I recorded it in the laboratory before no problem.

  I used the filtration cycle 60 FixRemove UM, but without result. Can anyone suggest how I can get rid of the background hum without losing the person speaking?

  Thank you

  Neil45156

  In the tasks Panel's menu 'clean up audio. When I had a problem similar to yours, I used that. Select also great amount of buzz with nothing to another in as you can (as if the interviewee stopped talking for a few seconds), then press "capture noise print" under the section of noise. Press the button to 'noise', which brings up the menu of noise reduction. Make sure that the checkbox 'use captured noise print' is selected. Mess with the settings according to your needs. It can make the speaker system as they are a little dull, but it's the simplest solution, I found.

• How to disable the additional noise filter when you use a Lifeproof subwoofer

  I have a 6 s Iphone now with a case of Lifeproof! I was told there is an option of noise or a filter to turn off so that people

  agree on cell?

  Thank you

  Gary

  You have the Lifeproof who says that it is for the 6/6s on the box? Or do you have one that says just the iPhone 6? If you have one that was planned for the iPhone 6, it won't work properly as it covers some things, that he should not.

  You can try to disable the noise suppression. Settings > general > accessibility > telephone noise cancelling.

• Removal of noise from working in Skype 7.2 Realtek?

  Skype Realtek Noise Suppression is unclear or can I finally spend v6?

  I guess that they do not give a * beep * on it, bro. I spoke with support Skype Online a few months ago. Don't think he actually heard me, but he said "I created a reference number for to document you our interaction today. SR:1301650329' and that's it.
  
  You guys can also try report a problem using https://support.skype.com/support_selection of selection (technical problems-> audio problems-> next-> try to get a 'text chat support').
  
  Stuff like "reinstall the Skype Skype/windows/profile" does not help.
  
  PS Skype version 7.0.0 is the last version without this issue for me, not only 6.22.

  [redacted for security]

• How to get the speech recognition do not answer to outside noise

  How to avoid that speech recognition didn't respond to surrounding noises instead of my voice? It automatically turns on by itself.

  Hello

  Click with the right button on the speaker near the clock on the tongue - recorders - just below levels that you can
  lower level and the boost - also on the development tab, you can check the Noise Suppression. No doubt
  you will need to experiment with these settings.

  The microphone settings are also available in the control panel - sounds

  And there may be an Audio Manager appears in the Panel that has parameters.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Issue of noise reduction

  Hi all

  I have a picture shot at 3200 ISO and have reduced the noise considerably in camera raw. Satisfied with the results here. However, when you open the it in PS CC, the noise is back as if I have nothing in ACR. PS noise reduction filter will not come even close to the results obtained in ACR.

  Am I missing something?

  Also tried to save it as .tif and .jpg same in ACR, but same result when opening these files in PS.

  Thank you

  In ACR, have you checked the NR to 100% zoom?   If this isn't the case, it is possible that noise is still there and some algorithm used by CAB to resample an image to the screen, is artificially noise suppression, which is not really gone, and PS shows the noise remains.

• CAPTURE VIDEO AND AUDIO FROM THE DESKTOP

  I USE A PAVILION DV 7-6163 WINDOWS 7 OS.

  WHEN I CAPTURE VIDEO FROM MY OFFICE, I ALSO CAPTURE ANY SOUND MY MICROPHONE PICKS UP. A COUGH OR SNEEZ. HOW TO PREVENT THIS?

  Thank you

  Its simple. DON'T cough or sneeze when you capture video.

  The laptop you have has a dual digital microphone array that has form the beam, cancellation of echo and noise suppression software support.

  Also go to control panel > programs and features, uninstall the drivers Audio IDT, restart the computer and install the drivers updated from here and see if that helps.

• Satellite A500 - speakers crackling

  Really annoyd in how they are allowed to sell a laptop which is MODEL for multimedia and its speakers don't work and don't even recognize that it is a toshiba...

  I am flexi praising my laptop from harvey norman and I keep telling them that it won't and I wouldn't have to wait for them to fix it.

  I should get a new one as soon as possible... Think you Toshiba fellow users...
  Need Toshiba wake for them - same people otherwise will realize that they now, a second rate provider...
  That is my rant done.

  If anyone has an ideas on how to solve the problem would be great...
  The pilot of uninstalling and reinstalling does not help, but it doesn't last...

  Bravo cordially in advance for anyone wishing to help n listening

  Hello

  I advise to use a search option before creating a new thread on the topics that was discussed in this forum always!

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=186388

  try updating the graphics card driver I have no idea why the graphics driver may affect the sound card, but it seems that new update has helped.

  Also go to control panel-> hardware and sound > Manager Realtek audio HD-> microphone, then click NOISE SUPPRESSION

• Satellite L50T-A-145 - Audio problems

  Hello

  My wife has an old L50T of a month, which seems to be suffering from audio gremlins. She hears any problems, but when asked about through Skype/Google Lair, they always complain extremely loud background noise.

  This sound has been described as either a kettle to boil or the noise of mechanical parts, such as a metal fan rubbing against a metal casing. Also people have commented on feedback/echo being broadcast by its speakers when they speak.

  The noise is really so bad that she is close to the laptop as unsuitable to the use of return, but she prefers not to do so because she likes it, in all other respects.

  This brief description, anyone has any idea what it could be?

  Thank you

  Iain

  From my point of few the described issue is a common feedback between the microphone and the speakers loop.
  This may appear if:

  You increase the Microphone Boost option.
  The speakers are too close to the microphone.
  The speaker volume is turned up while the microphone to hear the speakers.
  You have a very sensitive microphone.

  You should try after workaround for this problem:

  1. open Control Panel.
  2. open the material and its setting.
  3. open the sound setting.
  4. Select the recording tab, and then double-click your mic that you selected as the default recording device.
  5. click the levels tab and reduce the Microphone Boost setting.

  You may also be able to reduce the feedback loop by selecting the development tab in the page properties of the microphone and by selecting one of the following options:
  Activate the Noise Suppression
  Enable acoustic echo cancellation

• Re: Delay Microphone Equium P200

  OK, that's how! I'm a DJ of the Internet, and I use different bits of software both broadcast my shows and do things like create jingles etc.

  When I try to use the microphone to do anything that involves it broadcast over the speakers, I get half a second or if the delay between talking to me and the sound coming speakers! Any software I use (and I went through all the configuration options for each piece of software, so I know this isn't an any of them).

  Anyone got any bright ideas? I'm tearing out what little hair I have left, come out in clumps!

  See you soon!

  Hello

  You have Realtek audio driver?
  If Yes, then you should have one installed Realtek HD Audio Manager in the control panel.
  Please check the settings there.

  In your case, I recommend you to reset the settings, digital output and the microphone tab you must activate the acoustic echo cancellation and noise suppression.

  Audio driver should be updated as well.

• Satellite L755-1NM - built-in microphone out fading

  He's tried to call Skype, only to discover that the other person was not at all hear me. Checked the settings of the microphone in Skype and the parameters of the device, and the microphone is about not working not properly.

  What happens is that whenever I start anything that can use the microphone (so, when I call, or when I check the settings of the microphone), it works for a short time, but, in a few seconds, just flatlines.

  As a way to illustrate, I recorded my voice making a constant sound on [vocaroo | http://vocaroo.com/i/s01hJV8kLaMP]. What you hear is my micro detect noise and fading then out, ends up losing any sound detection.

  I think this could be a hardware problem, because I did not bring any changes to the software that may have affected the microphone. In fact, just some time after I found this question there, I reinstalled the drivers and it has not corrected. In this case, I guess the only option is to send my laptop in for fixing (which I would rather).

  In addition, he was still perfectly working about 2 or 3 days ago.

  Anyone have any ideas?

  I assume you mean on the internal mic, which is part of the webcam.
  Have you tried an external microphone?
  The same problem appear using this external microphone?

  I think it would be useful to know that, because in this case, we would know if its hardware or software (setting) related question.

  You can also check some settings of microphone that is located in:
  Panel of-> sound-> recording tab-> mic (right click, properties)

  In a new window (mic properties), you can find tabs more as levels, improvements, advanced

  In the levels tab, you can change the Microphone Amplifier.
  On the upgrades tab, you can disable all effects as well, you can activate the acoustic echo cancellation and noise suppression

  I recommend you test check and try different options.

• Satellite L300 - 14G - Microphone volume of very poor quality

  Hello

  I have a satellite L300 - 14G. I would use a microphone.
  When I connect it to the front, the quality is very bad.

  If I pushed it there is a lot of background noise.
  If I don't push it I have to talk REALLY loud to make myself heard.

  Hello

  Using the external microphone?

  Please check the settings in the control panel-> Realtek HD audio Manager
  There is a tab named Microphone.

  You'll find called settings: acoustic echo cancellation and Noise Suppression.

  In addition, you can increase the volume of the microphone at a higher level.

  See you soon

• Ready for the opening of Photos (I think).

  OK I think I'm ready to give up the opening and move to the Photos.  Should I do this?
  I thought that when I saw that DXO are now available on the app store as a plug-in for the Photos.  Has anyone used this yet?  It will bring pictures until it can make opening?  I won't be able to do in the Photos I can do in Aperture?  I know these are probably questions that have been asked over and over - I'm sorry.  If I am to make the change, I guess that I've upgraded to El Capitan and Photos of enforcement will be there and there will be an easy way to move the Aperture library and my library of iPhotos in Photos?  I think anyone can help me with this.  I have an imac with 10.9.5.

  David

  None of my camera RAW formats is supported in DXO, so I was not even looking at it.    http://www.DxO.com/us/photography/photo-software/DxO-opticspro/supported-cameras

  Take a look at what may make the extension of DXO photo:

  https://iTunes.Apple.com/us/app/DxO-opticspro-for-photos/id1056077392?MT=12

  It will improve in photo RAW development:

  The extension is able to apply optical corrections, White Balance correction, DxO Lighting Smart, FIRST denoising and mist removal DxO ClearView, in a completely new user interface that is intuitive, simple and clean.

  One-click fixes for RAW images:

  • Corrections by default include the Smart lens, White Balance, DxO Lighting Corrections, noise suppression

  • Toggle to see the before/after the benefits

  • Choose faster (HQ) or better a (FIRST) Denoise correction

  • Use the magnification loupe to get a glimpse of the FIRST denoising

  • Default restore with one click fixes

  One click ClearView DxO for RAW images:

  • Immediately remove the mist and the smog of landscape photos

  • The choice between different levels of intensity with a single click

  But I have yet to find an extension that can replace brushed adjustments Aperture to photo editing.

  Photos does not yet offer a lot of control over the design of the library and the support of metadata is still poor.

  I use it mainly to keep a selection of my photos in iCloud and synchronized across all of my Macs.

• Final Cup Audio improve the Discussion

  I'm curious...

  Why the Audio improvements in Final Cut, for lack of better words, suck?  How is it that you are 'improvement' of the audio and it ends up sounding as if you were inside a tin can?  I'm just curious, because when you typically add a filter, it in fact "improves" everything you are working on.  Audio enhancement is entirely used for something else?  Maybe once out a 1000 x, especially background noise suppression, has worked the way it seems like it should work.  Like why the computer thinks that a perfectly fine tuned music video which is already been published by a production company has errors?  Looking forward to the cat.

  Chris

  PS

  I noticed similar:

  

  The audio above is apples own sounds iLife.

  Out of the box 'Apple', he suggests using noise removal, is not.

  This setting market gives you the audio effect "in a tin can".

  Thing, it's a starting point not a final result, tweak, as required for the 'Sweet Spot' If audio was indeed need to remove background noise.

  My approach is to connect a set of quality headphones and listen.

  Al

• measure the tension between adjustable borders

  Hello

  For my program, which I use to read temperatures and flows, and etc., on an engine test bench, I want to be able to build in a sort of borders of adjustable threshold for the minimum and maximum values for the tensions. When the engine is not running, there are still some low floating values visible on the façade. I want to put in a few border/threshold voltage values. This value should leave the front panel displays to display zero when the signal is very weak and floating. Is there a function for this? For ceilings, it is not really local, but I wonder if there is a building block for this already present in labview.

  My program should also be attached.

  Thanks in advance, best regards, Theo

  Is that what you want for your noise suppression? It uses the range and force? to test the signal against the limits and replaces everything off of the beach with zero data.

  Lynn