Noises grinding hard when I record

I tried my rocket to record myself when I practice (classical) music. Sometimes I have a shrill noise every now and then when I play back and other times it's beautiful. The noise lasts a fraction of a second, but he is very strong. This isn't a mechanical sound - I tried to put it on a soft cloth to isolate vibrations, but there are still times. Any ideas what this could be?

In addition, there is no way to change the frequency of sampling for recording is here?

Thank you

Advertisement

Just to close the loop on this thread, it looks like the update of the firmware (1.01.15) fixed the problem! I was delighted to see they're addressing this, I thought it was a hardware limitation.

Tags: SanDisk Sansa

Similar Questions

  • Hi all, I keep is typed in the password at startup box, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

    Hi all, I get a storm of +'s typed in the password at startup box upward, in bars in safari and firefox coupled with a stuck key noise that stops when you press a key, I scanned with antivirus that seems clear, can anyone help?

    Clings in the key on the keyboard? Wired or wireless keyboard?

    Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

    Etrecheck - Information System

    Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

    Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

    Reset the NVRAM EXTRA memory

  • IPad 2 Air mic got wet and now when I record everything I hear is static. Help, please!

    I went to the beach and I was recording the waves, a large wave splashed me and my iPad, I have not wet but it was a small splash and now since when I record, it makes a staticky sound when I play it back. Please help

    This device has probably suffered water damage

    Please take a genius appointment at an Apple Store, or select another authorized service provider.

  • Camileo H10 - what is fps when I record 1280 x 720?

    Hi all

    can you please tell me someone what is fps (frames per second) when I record 1280 x 720 on this unit.
    All the docs and newspaper broadsheet says it's 30 frames per second. But when I opening recorded video in the player VLC it said 20 fps.

    And the properties of files windows too. Where is the truth? Or the problem?
    Thanks for the reply

    Hello

    I tested it with different settings. The same result here.
    Sorry, but I don't know what to say on this subject.

  • Vista, crackle on sound when I record webcam reading

    I have Dell Inspiron 1720 in windows vista, when I record using the integrated or eternal webcam then when reading there is a Crackle of sound that did not exist on previous records. I reinstalled codec sigmatel audui of high definition that made no difference. Please can someone help. Thank you.

    Hi FrankCampbell


    You can check the links below and check out them if the steps to help you resolve the issue-

    http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

     

    I hope this helps.

  • drive external hard when it is connected to the computer says hd not formatted want format you?

    drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

    Hi keo1,

    We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
    See check your hard drive for errors

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I record video in portrait mode, it displays in the landscape. How can I activate the image?

    When I record video in portrait mode, it displays in the landscape. How can I activate the image?

    Go to [MENU]--> [reading]--> [rotation]. The image rotates when you press the Center button on the wheel.

    If my post answered your question, please mark it as "accept as a Solution.

  • Message to display when no record found

    Hi all

    I cut that a report in two "Current" and "Previous" and report selector is used to select. The report works very well. But I want to display the message "No Results" when no records are on the criteria. The report is currently display 'Empty' when not responding not criteria.

    Please help me how can I achieve this.

    Kind regards

    C

    Another approach

    1. create two dummy report (consider Dummy_1 and Dummy_2). In the column's formula gives the variable of the presentation of the report Selector(consider the prompt is having values Previous and Current) prompt.

    2.Dummy_1 apply the previous filter (it returns a single line when you select date in the report selection prompt)

    3.Dummy_2 apply the current filter (it returns a single line when you selectCurrent in the report selector invites)

    4 have only two first section with this report and others with the previous report

    5 give the hinding section as below

    (i) Dummy_1 > 0 1 previous report section

    (II) Dummy_2 > 0 section 2 current report

    Concerning

    K.

  • My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

    My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.

    Hi chbradshaw,

    Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).

    Kind regards

    Nicos

  • Deep voice, when I record audio output

    When I record audio, speech output is deep and confused. But when I test my microphone in Windows, it is fine.

    Help?

    Liz

    Is it a question of Captivate?

  • addNode.sh fails when voting records are placed in ASM

    Hello Forum, adding a node with script addNode throws an error when voting records are placed on ASM. Has anyone else had this problem or ideas?
    Thanks a lot for your help.


    [[email protected] bin] $ sh - x./addNode.sh-silencieux 'CLUSTER_NEW_NODES = {host01}' "CLUSTER_NEW_VIRTUAL_HOSTNAMES = {host01-vip}.
    + OHOME=/u01/app/11.2.0/grid
    + INVPTRLOC=/u01/app/11.2.0/grid/oraInst.loc
    + ADDNODE='/u01/app/11.2.0/grid/oui/bin/runInstaller addNode - invPtrLoc - /u01/app/11.2.0/grid/oraInst.loc ORACLE_HOME=/u01/app/11.2.0/grid-silent CLUSTER_NEW_NODES = CLUSTER_NEW_VIRTUAL_HOSTNAMES {host01} = {host01-vip}'
    + ' [' "= Y o '!' /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl f ']'
    + CHECK_NODEADD='/u01/app/11.2.0/grid/perl/bin/perl /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl - pre-silent CLUSTER_NEW_NODES = CLUSTER_NEW_VIRTUAL_HOSTNAMES {host01} = {host01-vip}'
    + /u01/app/11.2.0/grid/perl/bin/perl /u01/app/11.2.0/grid/cv/cvutl/check_nodeadd.pl - pre-silent ' CLUSTER_NEW_NODES = {host01} "' CLUSTER_NEW_VIRTUAL_HOSTNAMES = {host01-vip}'"
    + ' [' 1 - eq 0 ']'
    [[email protected] bin] $

    /U01/app/11.2.0/grid/cv/log/cvutrace.log.0 output:
    < snipped >
    TaskVotingDisk: voting disk: TASK_SUMMARY: FAILURE: CRITICISM: VERIFICATION_FAILED
    ERRORMSG (Global): PRVF-5430: the disk configuration does not meet the recommendation of the Oracle of three locations on the disk to vote to vote
    ERRORMSG (Global): PRVF-5431: verification of configuration Oracle Cluster voting disk failure
    ERRORMSG (host01): PRVF-5449: location of verification of vote of the "ORCL:SPT_OCRVOTE01(ORCL:SPT_OCRVOTE01)" drive failed on the following nodes:
    ERRORMSG (host01): no such file or directory
    ERRORMSG (host01): PRVF-5449: location of verification of vote of the "ORCL:SPT_OCRVOTE02(ORCL:SPT_OCRVOTE02)" drive failed on the following nodes:
    ERRORMSG (host01): no such file or directory
    < snipped >

    Edited by: user12857528 11/14/2010 18:39

    Hello
    It reminds me of a mistake that I've met.
    In the addnode.sh script Oracle included cluvfy (-pre nodeadd), who with 11.2.0.2 also a shared device checks.

    Unfortunately this check of the aircraft (sometimes) will fail, since shared cluvfy device control does not always work correctly.
    A lot of other ppl. here probably already recognized installation 11.2.0.2 often will tell you that the sharedness of devices is not OK. You can ignore the installation, but not for addnode.

    So if you are sure, that your devices are shared (which seems OK after your release), you will need to disable the precheck required in the addnode.sh.

    Simply follow these steps:

    Export IGNORE_PREADDNODE_CHECKS = Y

    before calling the addNode.

    Concerning
    Sebastian

  • When validate record problem

    Dear friends,

    I try to apply the following code when validating record trigger


    If *: not in budgcode (select g_budgcode in the cat_acct.g_budg where g_budg_acccode =: t_vou_acc_code) * then
    alert_id: = find_alert ('MESSAGE_ALERT');
    set_alert_property (alert_id, alert_message_text, 'Incorrect Budget Code..');
    alert_btn: = show_alert (alert_id);
    raise form_trigger_failure;
    end if;


    during compilation, it throws the following error

    subquery not allowed in this context

    Thus, any work around?

    waiting for answer


    Manish Manyal

    Yes:

    select count(1)
    into l_count
    from cat_acct.g_budg
    where g_budg_acccode=:t_vou_acc_code
    and g_bugcode = :budgcode;
    
    if l_count = 0 then
     ...
    
  • iBots - how to send an alert when NO records are returned

    It seems simple enough send an alert when a query produces results, but I want to do the opposite. For example, I want to only receive an email at 7:00 when an object has no data for the current day inside. I don't want to know which records every day are returned.

    How would implement such an iBot as this event will fire every day, and only email me when no records are returned to the form of the request?

    (1) create a small report called "No record" and create an iBot unplanned for this report.

    (2) you have your iBot created for the original report, Yes? Very well. If you don't want any notification when documents are produced for the iBot, and then in the destination tab, make sure that all boxes are unchecked for "Of the devices."

    (3) now in the Advanced tab, click the "Add Action" button under the heading "perform these actions when no records are returned by the conditional query.

    4) click on "iBot."

    5) navigate to the ibot "No record" created in step 1.

    Now, when the original ibot fires and there are records, nothing will be sent because you not controlled all means to get a notification. But when there is no record, this event will trigger the ibot chained that you linked to in the Advanced tab. The iBot will be as an attachment, your report that says "no record".

  • Begin a new stage, when a record is deleted

    Hi all

    The last time I had to go a process when a record is added, and the solution is the OdiWaitForData tool.

    Anyone know how to ODI to feel that a record is deleted? The process that I starts when the record is entered said us it completed without error when it deletes a record in another table.

    Thanks in advance,
    Teodora

    Hello

    If you have no control to each source PK (correct me if I'm wrong) I could suggest:

    in the case of the source and the target be on separate servers:

    (1) create an interface for the temporary table (interface yellow) with all PK of source
    (2) create a procedure (a KM could be personalized so strategic occurs at several tables) to remove the target where a target PK "not there" into the temporary table.

    in the case of the source and the target to the same server, simply create the procedure.

    This help you?

  • start an executable ODI when a record is inserted

    Hi all

    I'm new with ODI and I have a problem. Is it possible that ODI to 'feel' when a record is inserted into an Oracle table that is mapped and launch a program? I use a shell script for this?

    Thanks in advance,
    Teodora

    You are in the right way.

    To have a continuous ciclic execution, you create a scenario and then a planner.

    Do you have the last reference tools ODI (.pdf) of page ODI at Oracle?

    Published by: Cezar Santos 10/13/2008 09:25

Maybe you are looking for

  • presentations keynote controller held in the hand

    Apple used to provide a practical hand controller and undress for remote control on a Mac for Keynote presentations. It was excellent, but the device function and remote control was abandoned when infrared eliminated Apple MacBook/Pro. I know that th

  • Find my iPhone does not connect

    I have a 6 s iPhone and an iPad and a macbook pro. All my devices are visible if I login to iCloud on the Mac, but find my iPhone app does not work on the iPad or the iPhone. Devices are listed, but cannot be found. I am connected to iCloud on all de

  • I can install another type of ram on my laptop

    I have a HP Pavilion dv7-1264nr laptop and I would like to improve my ram and would like to know if I have to use DDR2 ram or can I use something different like DDR3.

  • BlackBerry, Blackberry Passport box

    Hello Please tell me what exactly the area of passport for blackberry?I watched several videos on unboxing passport blackberry in youtubeand there are two different types of boxes, a small and anotherbigger and of course there are 3 clips charger, ca

  • Cannot change properties or remove any wireless network

    Hi all I can't change the properties or delete any saved in my laptop wireless network. I get an error message:"Windows has encountered an error in the recording of the wireless profile. "Error: access denied". I use Windows 7 Professional, logged as