Noisy fan UCS 6248 fabric Interconnect noise RPM

Similar Questions

• 6248 fabric interconnects FC interfaces and MDS ports license

  Hello

  I need help. I need to configure port-channel of CF between 2 x 9148 MDS and 2 x Cisco fabric interconnects. My main problem here is interfaces CF appear not on the fabric of interconnections (UCS Manager). I don't see ethernet ports. I have to turn on the unified ports or do I license for CF?

  I also connected the ds-sfp-fc8g-sw FPS but I get the error "operation status failed, reason: SFP Validation failed.

  Another thing, all 48 FC ports on switches DMS 9148 acquire the license. Aren't they supposed to come with 16 ports enabled by default?

  Any ideas?

  Hi Selby

  6248 FI unified ports, by default, all are Ethernet; so as a first step, you must configure the FC ports.

  You just need Ethernet port licenses, which are also universal.

  See, for example.

  https://supportforums.Cisco.com/message/3763853#3763853

  For SDM 9148 licenses take a look on

  http://www.Cisco.com/c/en/us/products/collateral/storage-networking/MDS-9148-multilayer-fabric-switch/data_sheet_c78-571411.html

  There are packages with

  Cisco MDS 9148 48 - Port Multilayer Fabric Switch with 16, 32 or 48 active ports of 8 Gbps

  Good luck

• Noisy fan on model Satellite U50T-A

  Someone told me everything resolves to a noisy fan? I have upgraded to Windows 10 but has had this problem before. I've tried the settings mode eco but fan still works in the background without the computer that is running hot.
  I saw the previous posts on this issue, but he does not seem to have solved easily and turns into a game works.

  I have BIOS version 1.10 but don't really want to mess with upgrades as they also seem to cause problems.
  No miracle solution would be great that this whirring noise leads me into the wall.

  Have you tried to change cooling option method in advanced power options?

  Usually this should reduce the activity of fan cooling.

• Noisy fan with 10 Windows using Portege Z30 - B

  I have my Toshiba Portege Z-30 b for the last 7 months. He received with Windows 8 pro. installed, all played very well. I have upgraded to Windows 10 about 5 months ago, after the upgrade, the fan ran constantly at a high unacceptable noise. Toshiba service replaced the fan - no result. I have been informed by the service to install the utility 'eco' - done. No results. I was informed by the service don't upgrade to the latest version of the Bios - done, no results. The noise is there in case of station dock, here in the position "charge" and there when it is on battery. I seriously consider to sell and move to the Lenovo or Dell. Anyone has any advice?

  Check thread is: https://forum.toshiba.eu/showthread...-117-noisy-fan
  It is more than 1 year... and still no good solution.

• Satellite C650 / 01 M noisy fan

  Hi all

  This is my first post and first experience with Toshiba laptops: D.
  So here's the thing, I bought Satellite C650/01 M a few days ago and I noticed that the fan is a bit noisy, it's like a "Bee noise" or "House sound fly" lol, but the temperature of the computer is fine.

  So I'm wondering if this is normal or I have to return it? Any experience with this particular model?
  BTW, here is the link of the laptop:
  [http://dicksmith.com.au/product/XC8927/satellite-c650-01m-notebook]

  Thank you!

  Hey,.

  I Don t Satellite C650, but normally it should be possible to change the method of cooling Windows Power Management. You can change between optimized battery and a maximum Performance.

  I put the battery optimized option and this reduced the activity of the fan and the cell phone was much quieter. :)

• Tecra R850-520 - noisy fan - no cpu load - Win7 and Win8 64bits

  Hello. I got the Tecra R850-520 4 months. from the beginning, I have the same problem - noisy fan but no load cpu (about 2-4%) using win7 and win8 64bits

  I tried to change the windows profile to optimize or energy saving. but I still get the fan noise. Set the bios to 3.90. I have re-checked windows 8. and always the pleasure is strong. When no cpu is used.

  Notepad is cool - so I don't know where is the problem. It's probably bad driver for ACPI or for measuring the temperature. I tried to change the position of the laptop - and I found two metal plate on the bottom.

  I think that it is a measure of temperature sensors. When I flip the laptop, and the plates are "we air ', not touched by any material - the fan will slow down in a few minutes.

  Could someone tell if no pleasure of speed will work? or maybe Toshiba updates the bios or drivers for it eventually?
  Comfort for laptops of business is very bad. I SDS - and this is also limited. I didn't assume that Toshiba will sell such a sh...

  If someone could have some drivers or set which will slow down the fan under 64-bit windows?

  T.

  Hello

  You can set Windows Power plan settings in order to improve the cooling system.

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

  Try this settings:
  Plan (Toshiba power save) optimised battery
  Technology Intel Turbo Boost (BIOS) - disable
  The CPU always low frequency

  From my experience, this should reduce the noise.

• Satellite A500-1E4 (PSAR9E) - noisy fan stops is never (BIOS version 1.60)

  Hello from the Czech Republic, I have also problem with noisy fan on my new Satellite A500-1E4 (PSAR9E) (i430M, GT330M) on 64-bit Windows 7 over Office Standard - see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=46719&start=165&tstart=0.

  Today I have updated the bios to 1.60 (from 1.20) and there has been no change. When the laptop powered to the top of the adapter in all modes the fan is running at 60-70% (sometimes at 90% - my office is perhaps quieter :-(). What laptop power battery in normal fashion fan and high performance race to 60-70% (loud sound) and in the economy mode to 80% (very noisy). It's crazy that in economic mode produce more noise than mode high performance. The CPU temperature is cca. 37-43 C, GPU 48-57. Fans of course never stops and all it's standart office. No intensive work or games. I can't imagine in games.

  Can someone help me please, I'm really helpless. Or this fixes only bios 1.30 and next version not?

  Hey Buddy,

  I think that it of really difficult to say why this happens, but in my opinion you should provide more details about your operating system and drivers.
  Are you running the Toshiba factory settings or you have installed another OS?
  Fan sometimes high activity is due to a different display driver. Have you installed the latest display driver form Toshiba (NOT nvidia)?

  Old BIOS versions, you can get an authorized service provider

• Noisy fan on Satellite M50D - A - 10 L

  I bought this Toshiba model recently (2 months) and has started to hear a noise that transmits the sensation of * weight and drag * of the mesma

  Quando check the * "PC Health Monitor" * fan status indicates * 'good' * the strange sound comes * 53% * operating conponente the * "PCHealth Monitor. *

  I would appreciate help in the future, this problem can be identified.

  Thank you very much.

  What exactly do you mean by noisy fan?
  Do you mean the fan activity or perhaps the noise that would be created by the defective cooling module?

  Fan performance is dependent on cell phone usage.
  This means that the cooling module must work more quickly and often in the case where the dissipation of the heat that is created by the GPU and CPU would be longer than simple.

  This is nothing unusual.
  Of course, you can try to edit some Windows power management settings to reduce the CPU performance and to reduce the activity of module cooling.
  But the fact is the higher temperature, the faster the cooling fans

• Satellite U840W-10J - noisy fan and the version of the bios

  Hello

  more top of the machine when you run tempro said new version of bios is available, the link to it is [Satellite U840W BIOS 6, 40 - WIN | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 198 & selProduct = 7570 & selSh ortMod = null & language = 13 & selOS = 40 & selType = 4 & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 4 & page = 1 & ID = 84640 & DISO =-1 & driverLanguage = 42]

  But when I go to the bios, it says the version of bios is already 6.4 - which is strange since the release of this version of the bios date is 10/07/13. And I don't know that I don't have day of the bios for this version this month :)

  Why does say new version is available?
  Would be - that there's a newer version available, that only that it binds to an evil?
  Even if I download and try to install it, it says that this version of the rom is the same.

  Second question is noisy fan, most of the time is at very high speed (and because of the odd design, when the laptop is open, screen - which becomes really hot fan).
  Since no other laptop I used make these noises, if I really need to update for the bios? But which version?

  Health Monitor shows the 77% fan speed - and I'm not playing games or whatever it is, cpu is always below 10%, I m doing nothing, just a light browsing can turn up to such percentage. What I've noticed, is that it becomes this top still when HARD drive this is - like application installation, download updates, etc... I have download the latest drivers intel to drive HARD, all drivers are more recent. Or is it only noisy due to bad design (fan blowing on screen), and I can use it for heavy work and just have to ignore the noise of the fan?

  Last updated driver to trackpad kills finger double scroll btw, so, maybe you guys could solve the problem too? Since I had to go back to the old version.

  BTW, the machine is only two days old

  I think that you should not be confused on BIOS. Maybe there is a problem with Tempro. This process runs automatically and it is possible that there is a technical problem. If you have latest BIOS is OK so Don t you worry about this. Just continue to use your laptop and don t change anything.

  What about cooling fan? Cooling fan is controlled automatically and according to the temperature CPU cooling fan works more rapid or slower. When you play the games you need more performance, so use leverage plan high performance. For each day of activities, use the balanced power plan. It will reduce the CPU usage, but it will be good enough for low level activities. What you can try is to change the options for the method of cooling. You can find it in the advanced power options. It should reduce fan cooling and portable activity should run quietly.

  Play around with these options.

• Noisy fan of Satellite C660

  Hello!

  I have a laptop Toshiba C660-1DN, I bought it in October. My problem is, that the cooling fan starts within the first 2-3 minutes, and it continues to turn, until I have shut down the computer.

  It is loud and very annoying.
  I installed all the drivers updated bios to 1.8, changed the cooling method in Windows, changed the frequency of the CPU in the bios to 'Always low', but neither helped.

  It is interesting that there the same noise, if I'm playing a FPS games for hours, and I write text in Word, or browse the internet... I bought a coolpad, but it did not help also.

  Air - flowing on the left side - is pretty cool, but it comes out with great speed. I used some other laptops, (Acer, Dell, HP), but they runs hot or even warm air.

  _Temperature (AIDA64) _ details: (the machine is on a glass table, balanced energy saving mode)
  1 CPU / 1. kernel: 61 ° C
  1 CPU / 2. Base: 58 ° C
  PCH: 66 ° C
  BMI: 65 ° C
  GMC: 27 ° C
  GPU diode: 53 ° C
  TOSHIBA MK2565GSXV: 33 ° C

  Fans of _Cooling: _
  CPU: 3093 RPM (103%)?
  GPU: 30%

  My question is that is - this normal?
  Thanks for the replies! :)

  > I have installed all the drivers, updated the bios to 1.8.

  It seems that there is a new BIOS version v1.9 for Satellite C660 PSC1JE available on the European driver Toshiba page. You can try to update the BIOS.

  Also, try this power aircraft settings:

  _1st proposal: _
  Cooling method: Maxim Performance
  Intel Turbo boost Technology: activate
  CPU frequency mode: always low

  _2nd proposal: _
  Cooling method: optimized battery
  Intel Turbo boost Technology: disable
  CPU frequency mode: always high

  Here you can find the simple options:

  
  Changes in the operating system:
  --> Power Options control panel--> change the parameters of plan--> change power avancΘs--> TOSHIBA Power Saver Settings--> cooling method

  Changes in the Bios (power management):
  Intel Turbo boost Technology

  Changes in the operating system:
  TOSHIBA HW Setup--> the CPU frequency mode

• Noisy fan - fan starts 15 minutes after turning on the Qosmio F10

  My Qosmio F10 has always had a very noisy fan. The fan noise starts always 15 minutes after turning the PC on and stays of less regardless of what I do on the PC - even if this happens be nothing else!

  I tried to change the battary cooling method optimized in the toshiba saving settings in an attempt to stop the fan coming on but any change of setting seems to have no effect on the fan. I did a search on these forums and found a link to the utility fan - but the link now appears to be dead and someone somewhere else also suggested update but tv pilots who did not work or the other. Anyone have any ideas on how to make this laptop less noisy?

  It's all a bit frustrating saw I bought it to listen to music - and all you hear is the fan when the music calms down!

  Thanks in advance

  Believe me that it is not unusual that the F10 is a laptop with a high GPU and CPU. These regions produce a lot of heat and it must be cooled!

  Please don t compare mobile portable fans with the Qosmio. The Qosmio laptop properties resemble a PC and in my view a desktop PC is much stronger than the F10

• Satellite A200 - noisy fan and crashing Windows

  Hello

  I have Toshiba A200-28 s, bought in the summer 2008 the Russia.
  Before, I had a noisy fan, but as I read on the internet, it is common in Toshiba laptops.
  But anyway, I tried to Flash the BIOS (update), also for performance and other reasons. 1 week ago
  I downloaded the file to update the bios of Toshiba web site drivers. Update went well. Although I realized this fan noise has not changed. So far the fan was ok and I didn't experience any overheating.
  Also, I tried to clean the ventilation with vacuum.

  Today, when I switched on my laptop, windows started normally and after a while when I started my browser and check e-mails, fan started making really loud and strange noise, like a small hairdryer. And then windows froze. I turned it off directly (pressing and holding the power button / stop). I started again, this time I opened the program to the speed of the fan to check the temperature.

  After a while, windows froze and fan started making the same sound. Last I read was 49 C. And before that all happened, I checked the core temperature from time to time, and they were 60 C maximum, average 50-52 c.

  Then I started Windows in safe mode. After about 15 minutes, it's the same fan.

  Now, I started windows again in safe mode. And the fan noise seems normal. Temperature is 61. I use only the browser. I hope I'll be able to post this thread.

  I put t think it's because of the dust. Usually, I check how hot my laptop is, and is usually warm, not hot.

  I have the warranty, but I don t want to consider serving because I need it for my thesis. I think that in the service it will take at least 2-3 weeks for them to fix it.

  Please help me. Thank you for your time.

  Seymur

  Hello!

  First of all, what OS do you have?

  In my opinion, the temperatures are normally and don t forget that the fan must sometimes run to cool the CPU. Otherwise, it can be damaged.

  If you have Windows XP, you must install the Toshiba Power Saver. With this tool, you can change the speed of the CPU and cooling method
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the worst case you have to send it for repair to an authorized service provider, but don t be worry. I have good experience with this because the technicians are very useful and they will be committed to repair your laptop as soon as possible.
  My experience is that it takes only 1.5-2 weeks.

  Good bye

• Re: Satellite A500-GL - noisy fan

  Many people have complained about the noise of the fans on these portable and many computers and many times it is requested to clean.
  In many cases, laptops were new. Mine is new and makes a noise so * please MAKE is NOT * tell me to clean it up.
  This isn't what causes the problem.

  There is a problem with the noisy fans on this laptop and I noticed that it was a question on mobile phones earlier in this series too.
  These users managed to get Toshiba to take note and to eventually release a BIOS update to fix the problem.

  Please can someone from Toshiba, taking this problem serious too so users of GM of the A500, GL models can also receive a solution for this noisy fan.

  If you have this laptop and suffer from this problem, please add your name below.

  Hello

  Noisy fan? You mean the cooling module run too fast or what?
  The cooling module would go faster and longer if the internal temperature for laptop would be too high.
  You can control the laptop and cooling performance in Windows 7 power management!

  Have a look here:
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=41

  It s on Vista, but the settings are very similar in Windows 7

  PS: One of my friends owns an A500 and cooling modules work as usual

• Port-channel problem between fabric Interconnect and vPC N7K

  Hi all

  I have a problem with the Port Uplink channel between fabric interconnect with N7K using vPC

  It's my network for the UCS deployment topology

  

  N7K I configured vPC for red link and green linkto the fabric Interconnect A I has configured the Port-Channel with Member is Port 1 and Port 2, uplink is red link. Interconnection fabric B, I have configured the Port-Channel with Member's Port 1 and Port 2, uplink's green link.

  The interface port-channel on N7K show is good, each port-channel upwards and have all members. But the fabric Interconnnect, when I see in the UCS Manager, the status of the Port-Channel on Fabic A and fabric B dysfunction not more info: no operational Member. Although all the link is a link to the top and I've got the status of the Port Channel is enabled in the UCS Manager. When I see the properties Port 1, Port to Port-Channel 2, I see the number of members status is: individual. This means channel port is not up and no member in this configuration. I want to using the port-channel load balance and more bandwidth for the uplink of 20Gig. I don't understand why?

  Please help me solve this problem, I have to send the screenshot of UCS Manager when I show the status of the Port-Channel and Port-member in port-channel to reach items.

  Can someone help me solve this problem, thanks a lot. References, please include elements for more details on the fault.

  Thank you

  Trung.

  Hello Nguyen,

  Since the two N7k please collect:

  SH cdp nei

  SH run membership in. X int

  SH sum port-chan

  Thank you

  Matthew

• Fabric interconnection B, management services do not respond

  Hello

  We have configured the option Call Home at UCSM and we get error below the option Call Home since last Saturday. We opened with Cisco to resolve this error, but according to the TAC TAC "error is a temporary error that connects the fabric can automatically recover."

  Here are the error messages that we get

  E mail-1:

  Object:

  Notification of the system-A system - diagnosis: GOLD-major-2011-12-27 17:54:09 GMT - 12:00 fabric Interconnect B, management services do not respond

  Message body:

  Name: System-A

  Time of the event: 2011-12-27 17:54:09 GMT - 00:00

  Description: fabric B event interconnection, management services do not respond

  Severity level: 6

  E mail-2:

  Object:

  Notification of the system-A system - diagnosis: GOLD-major-2011-12-27 17:54:09 GMT - 12:00 fabric Interconnect B, management services do not respond

  Message body:

  http://www.w3.org/2003/05/soap-envelope">

  http://www.Cisco.com/2004/01/AML-session' SOAP - env:mustUnderstand = 'true' SOAP - env:role ='http://www.w3.org/2003/05/soap-envelope/role/next' > '.

  http://Tools.Cisco.com/neddce/services/DDCEService>

  http://www.Cisco.com/appliance/URI>

  http://www.Cisco.com/appliance/URI>

  1058:SSI1442BFRC:4EFA0641

  http://www.Cisco.com/2004/01/AML-block">

  http://www.Cisco.com/2005/05/CALLHOME/diagnostic>

  2011-12-27 17:54:09 GMT - 00:00

  Interconnection UCS 6100 series fabric

  4.2 (1) N1 (1.43 q)

  1059:serial number: 4EFA0641

  0

  true

  true

  fake

  6

  http://www.Cisco.com/2005/05/CALLHOME"version ="1.0">

  2011-12-27 17:54:09 GMT - 00:00

  Fabric interconnection B, management services do not respond

  diagnosis

  GOLD-major

  Cisco

  Interconnection UCS 6100 series fabric

  [email protected] / * />

  [email protected] / * />

  ContractID

  [email protected]/ * */@SSI1442BFRC

  System-A

  Name

  [email protected] / * />

  + 00-0000000000

  Address of the Office

  http://www.Cisco.com/RME/4.0">

  N10-S6100

  0.0

  SerialNumber

  sam_content_file

  <>

  ACK = "no".

  cause = "management-services-refractory.

  changeSet =""

  Code = "F0452".

  created = "" 2011-12 - 27 T 23: 24:09.681 ""

  descr = 'interconnection fabric B, management services do not.

  DN = "sys/mgmt-entity-B/error-F0452".

  highestSeverity = "critical".

  ID = "2036245".

  lastTransition = "' 2011-12 - 27 T 23: 24:09.681" "

  LC =""

  happen = '1 '.

  origSeverity = "critical".

  prevSeverity = "critical".

  rule = "mgmt-entity-management-services-refractory.

  severity = "critical".

  status = 'created '.

  Tags =""

  [[type = 'management' / >]] >

  We want to understand what is the impact of this error and is there something we can do to avoid this error? I also want to know what that might be the cause get this error?

  Let me know if anything else is needed from my side

  See the downloaded file technology.

  Amit,

  I have reached out to the TAC engineer and will get back to you. In addition, please download tech to see the last UCSM to SR.

  "display the State of the extended cluster" would show the State of the cluster.

  For core dumps unannounced, you check in the Admin of UCSM tab

  Padma