Non-existent problem reports Action Center!

Similar Questions

• Mystery of BB email blackBerry Smartphones all non-existent problem

  Hi, I received an e-mail asking me to validate the password to the email address that I use on my BB, of [email protected]. It is said e-mails from my e-mail address are not delivered to my BB.

  But they are, or were a few minutes ago.

  Email tells me to go to the service Intenet BB site, then go to page email accounts. And I can't find one at http://uk.blackberry.com/support/software/internet.jsp

  So I can't find what's wrong and does not know why this email was sent to me. Can anyone suggest anything?

  Thank you

  Dave

  You should see a button called "accept as solution" right next to the key answer on each post

• Hurt, reports MSE Action Center is off

  Hello, I meet real problems with my action center in my window 7 64-bit, SP1 computer.

  I create a thread for this question because a lot of people have experienced a similar problem, but no clear solution has been explained.

  The problem:

  My problem seems to double. My Center of the action (AC) appears to be generally defective.

  I first noticed a problem when the captain reported that Microsoft Security Essentials has been disabled when, in fact, MSE has not been extinguished. It was working fine. See the image below.

  

  I tried to solve this problem, in the end, to uninstall MSE.

  I uninstalled MSE, then, I rebooted the computer.

  When I rebooted and waited for notification of HQ to bring up the taskbar, which I expect to contain the same caveat as before, which would have been correct since I had uninstalled MSE, I was surprised to find that a problem has been detected. I open HQ and found that no warnings were reported. Even more concerning, I found that when I clicked the down arrow for "security", was missing several elements in the usual list - the "user account control--> on" and the "Network Access Protection--> Off" were given, but the "network firewall extra," "Windows Update", "virus protection", "Spyware and malware protection, ' and 'Internet security settings' were not indicated. They have not been reported in KT; they have nowhere to be seen.

  Then, I have generated a system health report. The report states that "the Security Center has not registered an antivirus product." This report was right, because I had uninstalled MSE. The disturbing part is that, at this time, the AC has not been corresponding; It showed that the two issues mentioned above in the section 'security '.

  I reinstalled MSE from Microsoft Web site. When I did this, AC poster correctly all the elements in the "Security" section, have reported that MSE has been activated.

  Then I restarted my computer. When I rebooted, the same two warnings AC illustrated in the picture above popped up. MSE is running, but the captain reports that it is turned off. This report is incorrect.

  Both warnings disappear from the AC and all the elements in the 'Security' section are displayed correctly if a new definitions file is downloaded for MSE or real-time protection is turned off and then turned back on again, but they reappear after restarting my computer.

  The Question:

  How can I make the center of the action show the correct information, as it is supposed to, when my computer starts first?

  What I did:

  I already have:

  • Verified that the WMI repository is consistent
  • Run SFC - no issues found
  • Run a fix on the Windows Firewall and Security Center
  • Uninstalled and reinstalled MSE

  The result:

  None of these have solved this problem.

  How can I get the action center working properly?

  Please do not post generic recommendations or to take steps I have already taken.

  Please do not hesitate to publish recommendations technically involved.

  Your expertise is greatly appreciated.

  Thank you.

  I apologize for the delay. I have the answer. After "round and" round generic advice, I just decided to try some more specific actions.

  If you experience this problem even and you want to fix it, you'll need a PC running the same version of Windows 7 that your PC works lot of work but it works without problems, with regard to this point.

  Here's what I did to solve the problem:

  1. Create a system restore point.
  2. Run regedit.exe as administrator.
  3. Go to Center of HKCU\Software\Microsoft\Windows\CurrentVersion\Action.
  4. Compare the permissions and attributes of ownership of this key and all subkeys to your work PC.
  5. Change all permissions and property attributes for interest on the defective PC keys as they are the same as those on the operation of the PC.
  6. Go to HKLM Software Microsoft Security Center.
  7. Follow steps 4 and 5 for all keys and subkeys found in the path in step 6 above.
  8. Restart your faulty computer.

  I hope this helps. It worked for me.

• Action Center reported that Antivirus program or firewall Windows are disabled

  Original title: Windows & Errror Action Center

  I have a computer with an operating system Windows 7 dIesk. Recentlye Action Center reports that my anti-virus, maleware, and fire wall program are turned off. I tried to turn it on using the link in the application of Action Center without effect. The programs themselves show that they are in operation. Can anyone offer advice?

  Hello

  According to the description, I understand that Action Center keeps reporting that your antivirus program is disabled, even if it is still ongoing.

  This problem may occur when the updates of anti-virus definition is not properly installed or some security services does not work properly.

  Install the Windows updates pending on the pc to check if that helps.  Updates are additions to software that can help to prevent or fix problems, enhance the operation of your computer, or improve your computing experience.

  Please follow the steps below to check if his help.

  Method 1:

  Check if the installed anti-virus virus definition is updated.

  Method 2:

  Turn on Windows defender and firewall. Steps to follow

  1. Click Start
  2. Type in Windows Defender
  3. Click on tools
  4. Select Options
  5. Select administrator
  6. Select the option use this program
  7. Click Save

  Link for reference: http://windows.microsoft.com/en-US/windows7/Turn-Windows-Defender-on-or-off

  Method 3:

  Make sure these services are set to automatic

  1. Windows Security Center
  2. Windows Management Instrumentation
  3. SBSD Security Center Service

  Steps to follow

  1. Click Start and type services.msc in the search box
  2. Search for services
  3. Right-click on the service
  4. If the service is stopped and then starts the service
  5. To start the service, click and select Properties
  6. In startup type, select automatic

  Method 4:

  If the antivirus is updated, then you can disable the message related to virus protection.

  1. Open the Action Center
  2. Under Virus Protection select Disable messages on virus Protection.

  Hope this information is useful, if the problem persists please write us back with the quick information so that we can help you further.

• Windows 7 Action Center reports that Kaspersky Internet Security is turned off

  Original title: Windows does not Kaspersky

  I have installed Kaspersky Internet Security 2011 but "Action Center" is not recognize that Kaspersky doesn't work. Action Center reports that it is turned off but Kaspersky istelf don't complain of nothing and is turned on.

  What can I do?

  A reinstall of the KIS solves the problem

• Kaspersky reports disabled in Action Center

  Original title: cannot depend on the antivirus

  System and Security Action Center said my protection against viruses (Kapersky anti-virus) is disabled. When I clicked turn on now, he asks me if I want to trust this editor and run the program. I click Yes and nothing happens. I even restarted my computer and it is still saying Kapersky is off, but the program itself seems to work very well and is all updated. Is my computer just not aware that Kapersky is working or is there something wrong with my anti-virus.

  Hello Kristi Lauer,

  You can try the methods below to resolve this issue:

  Method 1:

  a. try to open Action Center > Security > programs see it installed the firewall and Antispyware.

  b. you should get a drop-down list that indicates the status of each and the possibility to select the ones to use.

  Method 2:

  If this doesn't fix the problem, I suggest you reinstall the suite Kaspersky Internet Security and check if you have the same problem. You can uninstall the software in the list programs and reinstall. You can refer the link that will give you information about this below:

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  You can also ask your question on the Forums of Kaspersky. You can follow the link below to ask your question:

  http://Forum.Kaspersky.com/index.php?s=067d212219004d463fda31258a6e5e75&ShowForum=156

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• Problem with the Action Center

  I have a problem with my NVIDIA Graphics Driver and Action Center said he found the solution, but it cannot be downloaded because it could not connect to the internet. The message is this:

  "Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later. »
  Of course, I'm connected to the Internet, so I don't know what to do. In any case, the problem is that whenever I play Starcraft 2 or Skyrim, the program crashes and I don't know why. I have already installed the graphics driver, but it keeps crashing.
  Thanks for your help :)

  If you have a large box PC machine, Dell/HP or laptop, for example graphics drivers are obtained from this manufacturer of PC, not Nvidia or windows Update

• Action Center reports an error that reads "reconnect your drive, it is important."

  Action Center reports an error that reads "Reconnect your drive, it is important," the history of your files was disconnected, too long. to keep save copies of your files, reconnect your player an n, then run a backup.  Any help?

  Thank you

  I noticed that my D drive (sd card) drive back unknow question under him? I can put it is not to back up files from the file history and I don't get an error, but I prefer to have connected and backup my files... I hope someone can help.

• Problems of Windows 8 with Action Center

  Greetings,

  I use Windows 8.
  I have problems with my services of Action Center, which denies my access to manually turn on Windows Defender, a long with error code 0 x 80070424 firewall.
  Earlier my wscsvc services missing actually, but I found a thread that allows me to re - import return.
  One thing I'm afraid however, wscsvc.dll file could be a version of Windows 7 - I'm not sure.
  Anyway, after getting the file back wscsvc, I am able to run Windows Defender. However, the option that allows me to turn on and off the center of the Action seems to have disappeared. And I still cannot turn on my firewall manually.
  
  I found some malware on my computer earlier and he was able to successfully get rid of them with Malwarebytes Anti-malware, I guess this is one of the reasons why wscsvc was missing.
  I would like to ask for help on how I could solve this problem. Thank you very much!
  Cara
  PS: I found a few posts on restoring my registry with the CD thing: but I don't know how since I don't have a CD of WIndows 8. (my computer has been pre-installed with Windows 8, and the CD only I can find the ASUS driver CD or anything...)

  Greetings,

  Then I did the scan, but he can't find anything...
  So, I tried to scan my computer with Malwarebytes Anti-virus and tdsskiller and aswMBR and esetsmart... I seem to have got rid of the virus, and after restart twice Windows Defender works again, after his auto-scan, firewall is back to normal again.
  It's really weird and hope everything goes well with the computer more...
  anyway thanks a lot for your help and your time!
  Cara

• WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running. Can not get the corrected message.

  WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running.  I tried to turn it on through the Action Center, but nothing happens.

  Thanks for the reply.  I appreciated the recommendation run malwarebytes because it gave me peace of mind knowing that he found nothing.  The error of origin correct auto in the last two days seemed so it was an update from Microsoft or a McAfee update that has straightened things.  Thank you once again.

• Action Center problem of address with spybot says stop working correctly

  Spybot does not correctly... stop 58 times... I ran spybot and its seems to be good, no threat found... but sometimes Action Center to give me this message

  Perhaps you should bring this issue to the Spybot forum.

  This forum is for Microsoft Security Essentials.

• In my windows live account, I am trying to remove an old, non-existent e-mail address of recovery

  original title: Windows

  In my windows live account, I am trying to remove an old, non-existent e-mail address of recovery. I was not able to remove it b/c he said I had to go to this old, non-existent account to confirm my changes. I then returned to the site solutions windows & as it suggests, has made the deletion of my password recovery information & added the one I want to use. He said in order to confirm the new email, that I had to go to the old, non-existent email to confirm. How I can confirn an e-mail from one account that no longer exists?

  Great subject line, specific to your problem. Expected to attract a lot of attention.

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/

• Warnings from Windows 8 Action Center that McAfee and the Defender is not activated after Windows update.

  In December 2012 after installation of the updates of Microsoft Windows on my machine Windows 8 and rebooting, my icon downtown Action system gave 3 warning messages:

  The spyware, antivirus and Firewall wasn't turned on do not.

  When I was in the center of the Action, he said time Windows Defender and McAfee have been disabled.

  I ran Mcafee checks as well as the defender and it states that my machine is virus-free.

  I clicked on Mcafee and it said all were lit.

  I called Mcafee technical support and they did something in December 2012 and has solved the problem and none of the messages is new. They do not just turn off messages in December 2012, they did something, but wouldn't discuss what has been done with me.

  However, today, Jan 8/13, another set of Windows updates have been installed by Microsoft and yet once again, the WARNING messages 3 came.

  I called McAfee support again and said that I didn't call each month when I install the updates of Windows to solve the problem and that there is a bug with Windows 8 and McAfee.

  I looked at the tech of McAfee as he did helpline (I work in technical support as well) and what he did this time was to turn off Action Center messages, thinking that I DINA realize that it was not really solved the problem.

  I told him, I understand that it seems that McAfee is not working properly, but I will not renew my McAfee Dell subscription this March/13 because that doesn't solve anything... it's just disable the warning messages. (I showed her that if I turn on the message, the warnings were still there... apparently he was shocked that I knew what I was doing).

  He said that McAfee is a problem with Windows 8 and McAfee and are working on a fix.

  The tech told me to get in touch with Dell and they would provide a fix.

  This problem does not occur with my Alienware Windows 7 pc and installation of Windows 8 I received is on my other pc from Dell.

  Is someone can you please tell me if there is a fix for this?

  I will not renew my McAfee subscription if it comes to the type of service that will be provided; I'll go with another antivirus program.

  Thank you

  

  

  
  

• Windows Action Center does not start

  I got a virus in my computer a few weeks ago and I managed to clean it away. However, I just noticed that the action center to my computer does not start.  Whenever I try to turn it on, it shows me a message "unable to start the Windows Security Center service. In fact when I use the services.msc program, that's not even be on the list here. Firewall does not normally or the other. It just shows the message "Update your firewall settings" and when I click on the box "Use the settings recommeded" it shows me an error message "Windows Firewall cannot change some of your settings for error code 0 x 80070424.

  Of course there is a lot of information on the Internet about the problem, but none of them does not seem to work in my case.

  I have Windows 7 Home premium sp1.

  I even tried to repair my windows installation, but that no longer works. He refused to uppgrade to a previous version, because the drive is off course basic win7 and my current one is win7 sp1. There are also some programs that are in conflict, even if I could not even find them in my computer.

  Is there any solution for this?

  It helped with my Action Center problem.

  http://GeekDrop.com/content/Windows-Security-Center-service-is-missing-and-wont-start-solved

  And this with the firewall.

  http://www.SevenForums.com/system-security/202166-unable-start-Windows-Firewall-2.html

  Win 7 security 2012 was the virus.

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.