Non-native install copy of Windows Home Server

Hi, I was hoping that someone could erase something for me.

I have an OEM of Windows Home Server 2011 version that I bought in England, when he arrived in the post that I realized that it is a German copy, probably why it was so cheap.

I'm not really bothered about it, if I can just change the language during or even after the installation. My question is this a problem or problem further down the line or the whole operating system will be identical to a UK copy if I change the language and regional settings?

Any help would be greatly appreciated, I'd rather not go back if I can't.

Hello

Please post your question in Server TechNet Forums.

http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

See you soon.

Tags: Windows

Similar Questions

  • Windows Home Server - Hardware requirements

    Good afternoon

    I am interested in creating a solution of Windows Home Server. I bought a Windows Home Server 2007 OEM media with the intention of creating my own solution, but never got around him a few years ago. My question for the community is the following: what are the hardware requirements for this solution?

    For me, it's a question I think I should know, but for some reason any I am at a loss! I think I need at least 2 computers. The first is the server itself, the second is a stand-alone computer that connects to the network.

    If you can give me some of the basic information I should know before diving into the Home Server I would really appreciate it. If you have all cards/articles that can help you with representation on what I need to do this would be as phenomenal.

    Thank you in advance!

    I confess that I've never used WHS and have no idea about it but. I did some research on Google and found this: http://homeservershow.com/full-tutorial-on-how-to-install-and-setup-whs-version-1.html introduction which then link a fuller version here: http://www.howtogeek.com/howto/9659/how-to-install-and-setup-windows-home-server/

  • Installation failure of OEM Windows Home Server 2011 - network continually devices do not found/installed

    Tried to install OEM Windows Home Server 2011 integrated custom server with ASUS M489GTD Pro Mobo and AMD Phenom IIx6 1055 t processor. Installation (3 attempts) would not end when network devices do not have to be found. Having read a number of user group locations and found amount of siginficant discussion on similar type problems. Searched and copied device USB and NIC brand drivers but the installation of WHS 2011 has been unsuccessful. Have since with success installed Windows 8 Preview of consumer on the server by using 'Device Manager' to find installed drivers located in appropriate files and C: / drive. Question: a plan 'best case' would try to do a new installation install WHS 2011 on my server or to an 'upgrade' type which may keep the driver folders/files? Thank you

     

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro on Windows Home Server public. Please post your question in the Windows Home Server appropriate Forum. You can follow the link to your question:

    http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

  • installing windows home server stop error blue screen 0x0000007b

    I want to install Windows Home server on a processor intel DH57JG motherboard with a processor Intel i5 650 CPU and 4 GB of Ram Kingston.

    I have 4 2 TB Samsung than hard drives in raid 5
    To make the bootable Raid 5 I partitioned into 2 drives the first being under the 2047 GB.
    The first part of the installation went well until I asked the question of f6.
    I downloaded the driver diskette file required to Intelbut she is 3 years old and says nothing on my motherboard.
    Ignore this as I get the Blue Screen of Death with the above Stop message.
    Any ideas anyone

    Hello

    Since your question involves the use of Windows Home Server please join the Windows Home Server Support Forums. They specialize in THIS type of environment Pro and will be better suited to help you.

    Windows Home Server Forums
    http://social.Microsoft.com/forums/en/whshardware/threads

  • Cannot install Windows Home Server

    Every time I have try and install windows home server it goes through the windows of files loading screen, then green bars on a loading screen then nothing. Let it sit overnight and still nothing

    Running an IBM thinkcentre with a Pentium 4 processor and 1 GB of ram.

    Any Suggestions?

    Hi RonDeMuro,

    In dealing with the problem by installing Windows Home Server, I suggest you to ask your question in the Windows Home Server Support for assistance.

    Reference: Support for Windows Home Server

    Hope the helps of information.

  • Windows Home Server 2003 - cannot install KB968349 (Power Pack 3)

    With Windows-Home-serer-2003, whenever I try to install Power Pack 3, I have the following message:
    The following upates wer not installed: Windows Server of the MCH PowerPack 3 (KB968349).
    Thank you or your help.

    Hi oldrourou,

    I want to tell you here.

    http://support.Microsoft.com/kb/968349

    Prerequisites

    To apply this update, you must have Windows Home Server Power Pack 2 installed. If you have a beta version or a release candidate of Windows Home Server Power Pack 3 is installed, you must uninstall these preliminary versions before you install this release of Windows Home Server Power Pack 3.

    If this post can help solve your problem, please click "Propose as answer" If you find it useful, mark it as useful by clicking the 'Vote as useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • My Windows Home Server evaluation copy is longer than 120 days. I can it upgrade to the final version?

    I have Windows Home Server (trial version for XP installed) and is now longer than 120 days. Can I purchase this software and activate it?
    Everything I see is Home Server 2011 which requires Windows 7 must be installed, my thing is too old for her.

    Thank you

    JB

    original title: Windows Home Server for XP

    Please see: Windows Home Server Support

  • G460: unable to copy files from Windows Home Server

    Hi, I just a G460 for my children. The problem is that it does not copy the files on my Windows Home Server. I tried wired and wireless access to my network, but there is no difference. -I can browse the files on my server very well - I can create short text on my server files (IE. I have write access) - OS Win 7 x 64 on laptop - disabled Avast, no difference - other PC (XP, Vista, Win7) can copy the same file easily - reproducible with other files (test file executable is 500 MB and 400 M movie file)-laptop connects to the internet download fine, of a file of 500 M finish at reasonable speeds - copy start , stalls and then she complains about the network connection disappeared. A simultaneous ping to the server shows that it is not correct. The connection never drops. This is reproducible with 100bT wired and Wireless-N. Don't know what there is to say about it. It seems that there is a configuration problem somewhere I hope it can be fixed because otherwise this laptop is going to come back. Thanks, Sander PS the paint job on these laptops is terrible. Gloss black? All - ALL - print digital watch. The laptop has 2 minutes old and already he looked mean. Not the best choice Lenovo. My old T61 seems better

    I uninstalled K9 web protection and now things work again. Very very slow for an adapter n, but at least it ends. I notified K9 on the problem.

  • Cannot install the Windows Home Server Vail connector

    WHS vail connector installation

    Hello fishman6709,

    Look at the post in the forum TechNet on the WHS vail connector installation failed.
    http://social.Microsoft.com/forums/en-us/whsvailbeta/thread/a8a22981-353A-497b-8c40-1e346e514e92

    You can post in the forums of Windows Home Server for better support. http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

    I hope this helps.

    Thank you

  • Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

    Home built PC

    Card mother Gigabyte GA-Z77MX-D3H

    Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

    Windows Pro 10

    Windows Home Server 2011 on LAN

    I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

    All good advice?

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

    If you give us a link to the new thread we can point to some resources it
  • Windows Home Server help please with the reader.

    I have a Windows Home server in my office that has a single hard drive in it.  I continue to be told to use the repair utility when I turn on my computer.  I bought a new drive for the server.  Now that I need help, it's how to duplicate the new disc of the former, is there a way to do it, or do I have to copy all the content on another machine on the network, and then install the operating system from the beginning.  I want to avoid the loss of data.  Any help is greatly appreciated.

    There are essentially two options available

    Place the new drive as the primary drive and keep the original as a secondary disk. Install WHS as a repair install and it should pick up original and index folders and re-create the tombstones for them. Then use the move to folder option in the console to make the folders shared the second partition of the disk. However, the indexing process is quite intensive and is perhaps not ideal with a line of demarcation for lack of drive.

    Alternative, remove the old drive and install the new, install WHS as a new facility that will create partitions C and D, including the new shared folders empty. Once the installation is finished, put the old one in as second drive or if this is not possible an external drive dock and then copy the contents of the old drive in the new. That would be my preferred option because it is perhaps easier and safer.

    There is no option to save and copy and settings users, even with a repair installation, you must manually recreate the users.

  • We need a replacement for Windows Home Server that does not cost $700

    We need a replacement for windows home server that does not cost as much as a PC. 2011 is not really available and 2008 has compatibility problems, because it is based on XP and Server 2003. None of the motherboard manufactures will support XP (thanks to MS) and more recent SATA drives do not work in my motherboard more old.

    Perry

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • Windows Home Server 2011 - key invalid product no

    Hello. When you try to enter my product key in my Windows Home Server from a remote computer, I get an error saying that my product key is not valid. When I was troubleshooting and tried to install it on another computer the product key worked very well. I was wondering if someone can help me?

    WHS2011 running on a HP EX475 - 2 GB of ram, 64-bit processor

    Hi Gavin,

    Thank you for visiting the Microsoft answers community site. The question you have posted is related to Windows Home Server 2011 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en-us/winserver8gen/threads

    Thank you.

  • Driver Realtek NIC missing after the previous Windows Update on window Home Server 2011

    During the last windows update, I lost the Realtek NIC driver on windows home server 2011. If you do not have the backup, is the only way rebuild machine or there is another way to install the driver software.

    Hello

    Since the problem is specific to the window Home Server 2011, I suggest that the validation of the query on the forum link mentioned here.

    http://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

    They are a team of dedicated support, helping issues related to servers in the window of the House.

    Hope the information is useful.

  • Transfer a Windows Home Server o/s

    I have a HP MediaSmart EX487 server whose power died.  It was running the Windows Home Server operating system.  Can I remove the system disk and Server data readers and install it on a custom PC pretty new, turn the PC into a server without damaging anything?  I have all the disks from HP, but do not specifically have a WHS disc.

    HP MediaSmart Server EX487

    Celeron 2.0 Ghz 64-bit processor

    3.5 to disks (2 750 GB drives) and 2-1 to

    Windows Home Server o/s works on 1 of the drives 750Go

    New PC:

    Intel Socket 1156

    processor i3-530 2.93 GHz

    8 GB of DDR3 memory

    Gigabyte P55A-UD7 motherboard

    6 SATA connectors

    2 LG DVD R/W drives

    Two monitors

    Mouse and USB keyboard

    Please transfer your inquiry to the most appropriate Windows Home Server SoftwareForum.  Thank you!

Maybe you are looking for

  • setting pid, please check my vi

    Hello I tried to adjust the PID for the motor speed control... I tried the pid and pid adjustment auto... However, I can not set the parameters correctly... the system is responding well at all... If I get open loop frequency for the system. Auto-Tun

  • JsonDataAccess bug?

    I try to analyze it: { "activities":[ { "activityId":, }, ], "goals":{ "activeScore":, }, "summary":{ "distances":[ {"activity":"tracker", "distance":}, {"activity":"loggedActivities", "distance":}, ], "elevation":, "veryActiveMinutes": } } And here

  • BlackBerry Smartphones MSN

    Can someone tell me how to download the MSN app use while it is running? I guess when it is open, but being not used it does not use anything, only when messages are sent and received. Am I correct that?

  • Computer can't find a driver for Epson Stylus BX305f?

    Computer can not find the package to control the printer Epson BX305F

  • Authenticate a password for Java

    Hey Experts,.I have a component that allows you to change their password at WCC inside, which basically turns off and changes the password of the user who is on the WLS Ldap. I need to enforce strict password guidelines, which some involve comparing