None of my USB ports on xp works, recently made full recovery.

Please help, none of my USB ports work, on the front or the back of the CPU.  They stopped working after a full restore, I don't really know why.  I tried to uninstall and leave is but it does not work, he finds the root hub, then a message appears saying: it has not been tested by windows, then if I press continue despite any another message comes up saying I need seehcri.sys disk installation, so I can't install the root hub.  I tried rolling back the drivers, can not do.  I noticed other people of the probs with pc suite of Sony ericcson, so I tried the advice they have given, such as the removal of all this, I did a search on the start menu, and no seehcri were found.  Can someone help please, I'm desperate!

Hello

seehcri.sys is a driver of Sony Ericsson.

1 rolling back the drivers on ALL of the hubs USB which showed they used Sony Ericsson drivers (Device Manager > expand Bus USB Controllers > right click on USB root hub > properties)

2 uninstall the SEEHCRI devices by selecting the option remove device driver software (or words to that effect)

3. then go to your Windows\System32 folder and delete the SEEHCRI. SYS file.

4. reboot, Windows will detect new hardware and 2 SEEHCRI devices will return to normal USB hubs when you allow Windows looking for new drivers.

If you cannot roll back the drivers in step 1, or Windows does not find the drivers in step 4, you will need to reinstall them from the original motherboard driver disk for your computer or on the manufacturer's website.

Follow the steps in troubleshooting of Microsoft KB articles and check if that helps:

Advanced troubleshooting tips for General USB for Windows XP problems

http://support.Microsoft.com/kb/310575

 

See also:

Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

http://support.Microsoft.com/kb/314634

A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

http://support.Microsoft.com/kb/925196

Tags: Windows

Similar Questions

  • None of my USB ports no longer works

    Original title: activate the usb port

    Suddenly, the usb ports no longer work.

    Used a recoverypoint, but did not help

    Remove all usb ports and new discovered computer and installs but no result.

    There is power on the ports becase that a usb fan works

    What to try?

    Hi JoopSteenhuis,

    Try the methods and check the results below:

    Method 1: Run the patch from the link mentioned below and check if the issue still persistent.

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

     

    Method 2: Remove and reinstall all USB controllers.

    To remove and reinstall all USB controllers, follow these steps:

    a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

    b. click on the hardware tab.

    c. click the Device Manager button.

    d. expand Bus USB controllers.

    e. right-click every device under the USB Bus controllers node, and then click Uninstall to remove one at a time.

    f. restart the computer, and then reinstall the USB controllers.

    g. plug in the removable USB device and perform a test to ensure that the problem is solved.

    You can also see the following article for more information:

    Advanced troubleshooting tips for General USB for Windows XP problems

    http://support.Microsoft.com/kb/310575

     

    I hope this helps.

  • None of my USB ports work

    My problem is the same... None of my USB ports work. I have disabled by mistake all and then discovered that my keyboard and mouse no longer work. I went into Setup and tried to allow them this way, but it did not work. I can go to Safe Mode and my arrow keys of the keyboard and enter the key work, but when it starts the key job. I am not able to get to Device Manager to turn them back on. I need help.
    TKS,
    Paul

    the work of the previous days your restore is completed.

    Use the restore option!
    Good luck!
    Chambers!
  • After a reboot, none of the usb ports work and USB problems-uninstalled USB Ports

    I just bought a Seagate external drive, but none of my usb ports work. I looked into it and followed what it says on the uninstall of my USB ports, bad move on my part. Now, after a reboot, no usb port works, I've tried all microsoft support said to do and nothing seems to work. I think I need to reinstall my usb root hub? Perhaps, but I can't seem to find anyway to do. Help, please!

    Hello

    Check the status of the device in Device Manager. Follow the steps for the same thing:

    a. click on start

    b. click Run, in the Run dialog box type devmgmt.msc

    c. in the Device Manager window, locate the USB key and expand the drive, double-click the sub element to check if an error message or error code is listed.

    If there is no error message highlight Bus USB controllers and then click Action select check for material changes.

    You can check the link below: advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/?kbid=310575

  • Satellite A135-S2286 - USB ports does not work after BIOS update

    I recently had the dreaded BIOS password prompt problem. I checked online to the toshiba support site and took the laptop to a toshiba authorized service center and is fixed by getting the updated BIOS updated to 1.60, but after update BIOS, none of my USB ports work.

    When I connect a USB device, a warning from yellow pop up comes up unrecognized USB device. The same USB device works fine on other computers/laptops. I searched online for a solution and found on a lot of people have the same problem, but did not find any fix for this error.

    It will be useful, if someone has a solution for this error.

    Hey Buddy,

    Is there yellow exclamation marks in Device Manager next to USB ports or they appear correctly?

    If you notice a yellow exclamation you must remove the USB port and restart the computer. All USB ports are installed automatically, you do not need an additional driver.

    I hope that it helps :)

  • USB ports do not work on Satellite M-series

    None of the USB ports work on my laptop. OS is Win XP SP2. When the system returns settlement she gives a pop-up error message "usb 1 post does not work. Please remove the USB plugged in this USB port.
    I tried updating BIOS, chipset, uninstall reinstall windows, alos tried only XP without SP or updates, still the same problem. Nothing happens when I plug the USB device into a USB port.
    Can someone has any advice?

    Hello

    This problem appears only after arriving in eve?
    If so, I would recommend disabling the safe option of power manager devices for USB controllers.

    I have also studied a little bit on the Microsoft page because in my experience, most USB problems are related to the Windows operating system.

    I found this document MS proposal excellent solution:
    http://support.Microsoft.com/kb/329255/en-us

    Good luck

    PS: What device you tried to connect to the USB port? Have you tried using a different USB port?

  • xw6400 workstation: USB ports do not work

    Non of my USB ports work. I tired everthing but always without success. In the end, I removed microsoft 8 and installed a new, but still my USB ports do not work. Motherboard is HP E93839

    Anyone know how to repair or fix this problem please?

    Concerning

    Thank you, Mohammed, but I already did everything on the Microsoft Web site. The problem is the motherboard no software issue. I plugged in the motherboard main power power off and waited 5 min the reconnected and it started working.

  • Why my USB ports do not work?

    I put my pc in the shop to replace my windows, because the guy at the store said that windows was not loading because it has been corrupted... well windows works well now, but none of my USB ports work, I looked in my pc info but find nothing... my keyboard and mouse are usb, so I am on my husband's pc to now try to help... I don't know much about computers, but cannot afford to take it back to the shop... Help, please

    Hi Loretta, try this and see if it solves your problem.   http://www.howtogeek.com/HOWTO/Windows/find-your-missing-USB-drive-on-Windows-XP/    We know how it goes.

  • USB ports don't work... flash drive, no mouse, do nothing

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    all the USB ports does not work; There is no error message. Have tried to disable/enable, stop and restart and the curse. None of these work:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Is to check the settings/settings (BIOS/CMOS) often F2 as you start so watch the display for
    access key - do well sure edge USB is activated if there is a parameter.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    Then lets refresh the USB stack

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical
    http://support.Microsoft.com/kb/310575

    ----------------------------------------------

    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

    Hardware devices not detected or not working - Mr. Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    ++++++++++++++++++++++++++++++++++++++

    Possible hardware USB badly shot - if a PC you can disable the onboard USB and use a
    3rd party card extension that are not expensive. If a laptop then you will need technical assistance
    a real computer store (not the leeks and the glances at a big box BestBuy or othe stores) or system
    Support from the manufacturer.

    Also check with the manufacturer of system and their forums support (as appropriate) for known problems and/or
    solutions.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • My USB Ports suddenly stopped working

    Hello

    I connect a second hard drive on my desktop (hp dc7600 sff) and everything was going well until I was prompted to press F1 to save changes to new material. I realized my mouse and my keyboard are not 'read' via connected USB ports. I tried to change the ports but still nothing, so in the end, I was unable to choose the F1 for the recording of the new HARD drive. I tried all the other ports, but still, nothing.

    I am now faced with a dilemma, I can't go through the login screen because none of my input devices can be connected to the PC, as all modules are connected USB.

    Help. I need to return to my beloved PC usage.

    Hello

    According to the description, I understand that the USB ports do not work.

    I would like to know some information.

    1. Have you tried using the keyboard of the screen?

    Try to use your computer using the keyboard of the screen and check.

    http://Windows.Microsoft.com/en-us/Windows/type-without-keyboard#type-without-keyboard=Windows-7

    We can refer to the suggestions by Mohammed Raieed said on June 1, 2011 and check.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/why-did-my-USB-ports-stop-working-suddenly/11303612-0809-4A3B-a2ba-c0c6b1234e97

    You can also check:

    https://support.Microsoft.com/en-us/KB/953367

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • USB ports do not work with Windows 7

    None of my USB ports on my Alienware laptop. I recently had the formatted hd and reinstalled the Windows 7 operating system. During the boot process any device are connected which has a power light turns on, but as soon as windows starts everything goes off. Once in windows, nothing works and I can not even my computer to recognize there is a connected device. Can someone help me?

    Have you gone to the support of the computer manufacturer web site and downloaded and installed

    all the updated drivers?

  • I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

    Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • Re: USB Ports do not work on my Satellite L830-145

    Hello
    I have Toshiba Satellite L830-145 with Windows 8 and all USB ports do not work. Have updated the Intel BIOS drivers and uninstalled and so on tried a lot and still no luck
    Maybe here someone will have an idea

    When I start the computer power light before windows starts and goes dead when windows starts loading
    On USB3 I can recharge the phone, but it won t recognize anything in windows
    Any help much appreciated.

    According to specification for laptop, your laptop comes with Win8 64bits.
    Using the original version of Windows preinstalled?

    All that you have done is just, but if nothing is done, maybe you should try to reinstall original recovery feature by image and test with the factory settings.

  • Satellite L650 - 12N USB Ports does not work

    My satellite L650-12N usb port does not work. I did everything that I could and it does not work.
    It shows a yellow exclamation mark on my system.

    I try so many ways, including the recovering auto troubleshooting, formatting and system he could not work.
    Under the key USB gives error code 43, I do not understand.

    The webcam and the wireless card no more.
    This boot problem after a storm in my area some time ago.

    Please can someone help.
    Thank you
    Sani

    Hello

    > This problem start after a storm in my area some time ago.

    Because other devices don't work properly and because procedure didn t get it back help you solve this problem, I think that the problem is related to the hardware malfunction possibly that the motherboard was hit by lightning, which would explain the problems

    I think you should ask the maintainer authorized Toshiba in your country to check the motherboard.

    But in my opinion, that the warranty does not cover the issues of environmental impact maybe your household insurance could help you

Maybe you are looking for

  • High temperature CPU on Satellite A215

    Hello My Satellite A215 is 3 months old. I use coolfan 4.33. and my temperature is 89 degrees now... This is not normal. How is that possible? What should I do?

  • Cannot install windows update, error: 80070641

    Original title: Windows updates (& other 3rd party updates) download, but will not be installed. Operating System: MS Windows Vista Edition Home Premium (32-bit) with Service Pack 2. Since early June, I was unable to install four Windows updates (Off

  • broken left hinge on Pavilion dv9000

    My Pavillion DV9000 left screen hinge broke about 2 days ago iv tried to other methouds of aid but support has been less then helpful, which continues. Pavilion DV9000 CNF70439YZ RP260UA #ABA About two days ago, I noticed that there is a sound of sna

  • Route filteration based on either even or odd network number

    I want to block the roads from the networking of odd numbers announced in my router. Example, I want to enable same roads of the 150.100.x.0 where x is 16,18,20,22,24. Thank you

  • Need Winzip

    It seems that my winzip program has completely disappeared from my computer.  I can zip is no longer a group of files.  When I right click any of these options, including making the Zip.  How can I fix this or how to replace the program with one that