None of my videos will not work after the update to version 13.1

Similar Questions

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• iPad will not restart after the update iOS9.3. Should force us the reboot?

  iPad will not restart after the update iOS9.3. Should force us the reboot?

  By restart do you average will not turn on?

  There seems to be a bit of a problem past, especially with older models of iPad 2. Some people have reported success after that restore their device via iTunes, for others that it has not worked and all they get is a message "bring it in an apple store.

  Since it affects a lot of people, I think it's safe to say that the problem lies in the range of Apple. But I don't think it is recognized or no matter what put forward fix.

  You can try to restore your device, or you may just be stuck waiting to see if a fix comes out.

  http://support.Apple.com/kb/HT1414

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

  the power button of my hp dv6 7204se envy key do not work after the update of windows 10

  any help on this please?

  .

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• Applications do not work after the update!

  Last night, I got a notification from the App Store that my MacBook needs to restart to complete the installation of updates. It is fairly common, so I clicked restart and let it do its thing. Some time later, I noticed from upward and go to my office. It was late, I therefore closed my screen and fell asleep. This morning I woke up and went to the pros use, and when I tried to open Mail dock I get the error "Cannot open"Mail"because it may be damaged or incomplete" and the icon has changed to this little pencil 'symbol' I tried some other apps, and it's the same thing. It seems that there is not a single application, I can open it. Every single app gives me this error message. When I open the Finder (the only thing I can open it) and go to the Applications folder, the only two things that are there is an icon of mail (changed on the small pencil symbol) and a folder called "utilities".

  To make things worse, Time Machine worked right for about a month, so I do not have a recent backup. I keep a sense repair or find a better backup program, but I don't have the time. My main concern is that all my music (from iTunes) files are still there. When I browse it in the Finder, it seems that all the files are still there. He Spears is only my applications that don't work... but he's literally all alone! Is that what I can do about it? Please let me know if anyone has an idea of what's going on!

  A

  If you want to keep the data on the boot disk, and it is already saved, you must try to save now, before doing anything else. It may or may not be possible. If you don't care the data, you can skip this step.

  There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to store the data.

  1. start the recovery partition, of the recovery of the Internet or a local time Machine backup volume (button option key at startup). Launch the disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

  If you use FileVault 2, you must first unlock the boot volume. Select its icon ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the drive, usually with the same name. Select open in the file menu. When you are prompted, enter your login password.

  2. If method 1 fails because of disk errors, then you can be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  3. If you have access to a working Mac, and she and the non-working Mac FireWire ports or Thunderbolt, start the Mac non-working in target disk mode. A MacBook to the retina (2015 or later) with a USB - C port can also be started in target disk mode and connected to another Mac using a USB cable and an adapter.

  Work Mac to copy the data to another drive.

  This technique will not work with USB (except on a MacBook of the retina), Ethernet, Wi - Fi or Bluetooth. Note that a MacBook Pro (with Thunderbolt) retina is distinguished by a MacBook to the retina, and it cannot be connected to another Mac via USB in target disk mode.

  4. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  B

  This procedure will remove some temporary and cache files. The files are generated automatically and do not contain any of your data. Sometimes they can become corrupted and cause problems like yours.

  Please, back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  /var/folders

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Open

  the contextual menu.* should open a case with a funny name "records".

  Inside 'files' are several subfolders, each with a two-character name. Drag all subfolders except named "zz" to the trash. Do not delete the subfolder named "zz". You will be asked for your administrator credentials.

  Restart the computer and empty the trash.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• HP250 G3 Notebook: network will not work after the upgrade to Windows 10

  Hello

  Someone was able to get their network works after upgrade to Windows 10 for their portable HP250 G3?

  I think I have a driver problem. The message I get is along the lines of "impossible to link to network protocols. There is also an "unknown" device in Device Manager. Comparison with Windows 7 Device Manager, I can't understand what it could be.

  Of all drivers not not to work, the network is one of the most important that you can not use the Internet to debug the problem. I have uninstall Windows 10 and Windows 7 troubleshooting. (such a pain)

  So far, I tried to download all the drivers of network you're interested in that I can find on the web, as well as the Bluetooth drivers. I reload once 10 Windows installed and hope for the best. They got the right driver for the wireless network (which works only default with Windows 10 I might add) work, but I think it might be a controller driver that is still missing.

  I found a few sites that have suggested to the registry of hacking. I tried that too, but without success.

  If someone hacked into the problem, I would be happy to help.

  Hello

  Thanks for posting your concern, and I would like to try the drivers from the following link---

  http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=6732463&swLangOid=8&swEnvOid=4192

  It didn't help not then write us back with the network card, you can get to the screen of the Device Manager under network adapters, as if from here so we can try searching the drivers from the manufacturer of netwrok card.

  Although I work for HP, but I am personally.

  Please click "Accept as Solution" If you feel my post solved your problem, it will help others find the solution. Click on the 'Bravo Thumbs Up' on the left to say 'Thank you' for helping!

  Concerning

  Aks3621

• Vista will not work after the power to

  I have a HP Pavilion laptop with Vista SP 1 64-bit installed.  Tuesday, April 14 I turned it on only to freeze with in ten minutes after having informed me it had installed updates.  At first, I thought it was a problem with my browser and uninstalled FireFox.  This does not alleviate the problem.  I run my adware and spyware detectors to see if something to eat to the top of the RAM.  All scans were free of malware and it is free of all viruses as well.  It took me three tries to get even the scans indeed the computer would lock up after 10-15 minutes whenever I turn it on.  I thought maybe it was overheating and checked, but the CPU temperature is normal and the fan runs.  I tried a system restore to get rid the updates in case this was the cause of the problem since it had fixed the errors before.  No luck. On the first two tests, he wouldn't even finish the restoration of the system.  I ran the memory controller and it froze and then shut down the computer.
  It crashed last night, while I was running a System File Checker and everytime I try to start it in safe mode, it gets stuck on:
  Support: \Windows\system32\drivers\crcdisk.sys
  After sitting there for sometimes more than ten minutes, it starts as usual only to freeze up again.  I tried to boot into safe mode with network and just Safemode and he refuses to do.  I am very worried that I have a big problem, but I can't stay up long enough to do any in-depth audit.
  All the world had similar problems or might know what the issue could be or am I just screwed?

  Hello brohne,

  Please use the Microsoft Answers form. Because you can run the sfc command or get no results to start in safe mode, I recommend that you perform a repair installation.  This option allows you to repair you computer and all in keeping your documents.  PLEASE SAVE YOUR SYSTEM VISTA FIRST.  The link below explains how to perform a repair installation.

  http://social.answers.Microsoft.com/forums/en-us/VistaInstall/thread/58ed3b94-D603-4FEC-83CA-b3d15d1275b8/
  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP C7280 solutions Center will not work after the upgrade to Windows 7

  I was running Vista and connected the C7280 wired and wireless. The last month or so has been wireless without any problem.

  I've upgraded to Windows 7, reinstalled the driver I had, and now when I try to scan I get an error that says: "an unsupported operation was attempted" which appears twice, then I get an error that says "an invalid argument has been detected.

  A window pop up gives then a few measures to try to resolve the problem.

  I downloaded and installed the driver PS_AIO_02_Net_Full_Win_WW_130_140.exe which did not work.

  I deleted the printer of the material then uninstalled the Software Solution Center

  Driver package driver re-installed PS_AIO_02_Net_Full_Win_WW_130_140.exe C7200 and

  dot4patch_reboot.exe installed,

  Stop the printer, it unplugged for a few minutes, restarted the computer, and

  the same errors.

  The driver is a year old, and I can't find a newer version.

  Exit the:		2009-10-20
  Version:		13.1.0

  The patch is the latest of a few months, but it did not help either. " Print Patch HP software when upgrading from Vista to Windows 7

  2009-12-06, version 1.0, 1.22 M

  This Windows 7 fix corrects some of the features of the printer after upgrading Vista to Windows 7. For networked printers, go to www.hp.com for more support information.

  Any help is appreciated.

  Finally, you have this problem fixed. With the support of HP no.

  I installed the software for a HP Photosmart Premium C410 series and it fixes some problems I had with the HP Solution Center, analyses the problems in the C7280 printing software.

  Go figure...

• Videos will not play after the publication

  I imported several .flv videos in my project, and they all play well when I do a preview, but once I publish the project as the videos just come as an empty frame. Video files seemed to be automatically placed in the same folder as the swf file, so I don't think that is the question.

  Does anyone know why this might be happening?

  Hi Drakier,

  Try a little test.  Create a new project with the same dimensions of your existing project. Copy and paste the 2-3 slides from your project that contains videos flv and then publish the project.

  Observe that now you are able to play the project perfectly well or not.

  Also if he does not play in the test project then add the test swf in Flash a location approved. After you have added the test swf in the trusted location if he plays well, then try to add your swf existing at the approved location as well.

  It may be useful

  Thank you

  VJ

• Satellite A100 Vista brightness will not work after driver update

  Hey,.

  I can't adjust my brightness. I ' t worked fine till updated my video driver.
  I downloaded the driver from NVIDIA.com. The 7000 series. I have a 7600 graphics card.
  Is that I have try to change the brightness using Flash cards blocked the entire program. And in the mobile Center
  the brightness option went :(

  Can someone help me and maybe keep the latest driver?

  Thank you
  Mathijs

  Hi Mathijs

  What is 7 FN + F6 key combination? You can use this option? Please let us know if you can change the display brightness in power options (check in all three plans).

• Remote control of my cell phone will not work after the upgrade to Windows Vista in Media Center window.

  I have a Toshiba Qosmio G35-AV600 originally shipped with Windows XP.  I did a clean install of Vista, which resulted in my remote no longer works.  It runs on my laptop. But the contoller stopped working in Media Center window.  And it does not turn off the computer.  So basically so that Vista runs the remote is useless.  I hope that someone a lot smarter than me can help you.  I looked on the forums of computer manufacturers and known issues advice with no luck. I have visited many sites looking for a solution.  Someone has an idea?  This problem is fixable?

  Check again - Device Manager this time select the option for "Show hidden devices'in view in the menu bar."

  It can show the unit.

  Other than that, you might be better off trying forums for Toshiba http://forums.computers.toshiba-europe.com/forums/index.jspa

• M4V will not play after the update of the Sierra

  I have a number of m4v files that will play is more in quicktime or iTunes after my update for Sierra on my MacBook Pro and iMac. The audio plays fine but the video freezes on the first few frames. I have no problem with those files previously.

  Any suggestions please?

  I have a similar problem as well. Some of my m4v files appear as a blank page with a folded corner icon. They will not play in anything other than VLC player. When I try to play them in iTunes the move, and he said LIVE. When I move the files to an older operating system (El Capitan), they play and correct appearance.

• Satellite A100-192: FN keys do not work after the update to Vista Ultimate

  I am a user of Satelite A100-192. Yesterday I installed Windows Vista Ultimate on my laptop. After installation, I realized 'Fn' and media player function keys buttons on my laptop keyboard do not work. What can be the problem?

  Hello

  Who knows? It s not easy to say what's wrong.
  Satellite A100-192 belongs to the PSAA9E series.

  All the drivers, tools and utilities need to be downloaded from the series on the right. Choose this model number!

  On the page of Tosh, you will also find the Installation Instructions. The drivers must be installed in that order. This is important.
  and don t forget to install the package of value added